Functionally graded hydroxyapatite-alumina-zirconia biocomposite: Synergy of toughness and biocompatibility

Functionally Gradient Materials (FGM) are considered as a novel concept to implement graded functionality that otherwise cannot be achieved by conventional homogeneous materials. For biomedical applications, an ideal combination of bioactivity on the material surface as well as good physical property (strength/toughness/hardness) of the bulk is required in a designed FGM structure. In this perspective, the present work aims at providing a smooth gradation of functionality (enhanced toughening of the bulk, and retained biocompatibility of the surface) in a spark plasma processed hydroxyapatite-alumina-zirconia (HAp-Al2O3-YSZ) FGM bio-composite. In the current work HAp (fracture toughness similar to 1.5 MPa.m(1/2)) and YSZ (fracture toughness similar to 62 MPa.m(1/2)) are coupled with a transition layer of Al2O3 allowing minimum gradient of mechanical properties (especially the fracture toughness similar to 3.5 MPa.m(1/2)).The in vitro cyto-compatibilty of HAp-Al2O3-YSZ FGM was evaluated using L929 fibroblast cells and Saos-2 Osteoblast cells for their adhesion and growth. From analysis of the cell viability data, it is evident that FGM supports good cell proliferation after 2, 3, 4 days culture. The measured variation in hardness, fracture toughness and cellular adhesion across the cross section confirmed the smooth transition achieved for the FGM (HAp-Al2O3-YSZ) nanocomposite, i.e. enhanced bulk toughness combined with unrestricted surface bioactivity. Therefore, such designed biomaterials can serve as potential bone implants. (C) 2012 Elsevier B.V. All rights reserved.

Structural, electrical and dielectric properties of sputtered TiO2 films for Al/TiO2/Si capacitors

Metal-oxide semiconductor capacitors based on titanium dioxide (TiO2) gate dielectrics were prepared by RF magnetron sputtering technique. The deposited films were post-annealed at temperatures in the range 773-1173 K in air for 1 hour. The effect of annealing temperature on the structural properties of TiO2 films was investigated by X-ray diffraction and Raman spectroscopy, the surface morphology was studied by atomic force microscopy (AFM) and the electrical properties of Al/TiO2/p-Si structure were measured recording capacitance-voltage and current-voltage characteristics. The as-deposited films and the films annealed at temperatures lower than 773 K formed in the anatase phase, while those annealed at temperatures higher than 973 K were made of mixtures of the rutile and anatase phases. FTIR analysis revealed that, in the case of films annealed at 1173 K, an interfacial layer had formed, thereby reducing the dielectric constant. The dielectric constant of the as-deposited films was 14 and increased from 25 to 50 with increases in the annealing temperature from 773 to 973 K. The leakage current density of as-deposited films was 1.7 x 10(-5) and decreased from 4.7 X 10(-6) to 3.5 x 10(-9) A/cm(2) with increases in the annealing temperature from 773 to 1173 K. The electrical conduction in the Al/TiO2/p-Si structures was studied on the basis of the plots of Schottky emission, Poole-Frenkel emission and Fowler-Nordheim tunnelling. The effect of structural changes on the current-voltage and capacitance-voltage characteristics of Al/TiO2/p-Si capacitors was also discussed.

Direct Characterizing of Densification Mechanisms during Spark Plasma Sintering

Spark plasma sintering (SPS) is a convenient and rapid means of producing dense ceramic compacts. However, the mechanisms responsible for rapid densification have not been identified satisfactorily, with different studies using an indirect approach yielding varied values for the densification parameters. This study involved SPS in high purity nanocrystalline alumina with temperatures ranging from 1173 to 1423K and stresses from 25 to 100MPa. A direct approach, with analyses at a constant density, revealed a stress exponent of similar to 1 and an inverse grain size dependence of similar to 3, consistent with Coble creep process. Whereas the direct approach gives a stress exponent of similar to 1, the indirect approach used previously gives stress exponents ranging from similar to 2.2 to 3.5 with the same data, thereby revealing potentially spurious values of the densification parameters from conventional indirect approaches to characterizing densification. The rapid densification during SPS is related to the finer grain sizes retained with the rapid heating rates and the imposed stress that enhances the driving force for densification.

Steady mixed convection flow of Maxwell fluid over an exponentially stretching vertical surface with magnetic field and viscous dissipation

The steady mixed convection flow and heat transfer from an exponentially stretching vertical surface in a quiescent Maxwell fluid in the presence of magnetic field, viscous dissipation and Joule heating have been studied. The stretching velocity, surface temperature and magnetic field are assumed to have specific exponential function forms for the existence of the local similarity solution. The coupled nonlinear ordinary differential equations governing the local similarity flow and heat transfer have been solved numerically by Chebyshev finite difference method. The influence of the buoyancy parameter, viscous dissipation, relaxation parameter of Maxwell fluid, magnetic field and Prandtl number on the flow and heat transfer has been considered in detail. The Nusselt number increases significantly with the Prandtl number, but the skin friction coefficient decreases. The Nusselt number slightly decreases with increasing viscous dissipation parameter, but the skin friction coefficient slightly increases. Maxwell fluid reduces both skin friction coefficient and Nusselt number, whereas buoyancy force enhances them.

Kinetics of dispersion of nanoparticles in thin polymer films at high temperature

We report the first detailed study of the kinetics of dispersion of nanoparticles in thin polymer films using temperature dependent in situ X-ray scattering measurements. We show a comparably enhanced dispersion at higher temperatures for systems which are otherwise phase segregated at room temperature. Detailed analysis of the time dependent X-ray reflectivity and diffuse scattering data allows us to explore the out-of-plane and in-plane mobility of the nanoparticles in the polymer films. While the out-of-plane motion is diffusive with a diffusion coefficient almost two orders of magnitude lower than that expected in bulk polymer, the in-plane one is found to be super-diffusive resulting in significantly larger in-plane displacement at similar time scales. We discuss the origin of the observed highly anisotropic motion of nanoparticles due to their slaved motion with respect to the anisotropic chain orientation and consequent diffusivity anisotropy of matrix chains. We also suggest strategies to utilize these observations to kinetically improve dispersion in otherwise thermodynamically segregated polymer nanocomposite films.

High-Temperature Deformation Processing Map Approach for Obtaining the Desired Microstructure in a Multi-component (Ni-Ti-Cu-Fe) Alloy

An equiatomic NiTiCuFe multi-component alloy with simple body-centered cubic (bcc) and face-centered cubic solid-solution phases in the microstructure was processed by vacuum induction melting furnace under dynamic Ar atmosphere. High-temperature uniaxial compression experiments were conducted on it in the temperature range of 1073 K to 1303 K (800 degrees C to 1030 degrees C) and strain rate range of 10(-3) to 10(-1) s(-1). The data generated were analyzed with the aid of the dynamic materials model through which power dissipation efficiency and instability maps were generated so as to identify the governing deformation mechanisms that are operative in different temperature-strain rate regimes with the aid of complementary microstructural analysis of the deformed specimens. Results indicate that the stable domain for the high temperature deformation of the multi-component alloy occurs in the temperature range of 1173 K to 1303 K (900 degrees C to 1030 degrees C) and (epsilon) over dot range of 10(-3) to 10(-1.2) s(-1), and the deformation is unstable at T = 1073 K to 1153 K (800 degrees C to 880 degrees C) and (epsilon) over dot = 10(-3) to 10(-1.4) s(-1) as well as T = 1223 K to 1293 K (950 degrees C to 1020 degrees C) and (epsilon) over dot = 10(-1.4) to 10(-1) s(-1), with adiabatic shear banding, localized plastic flow, or cracking being the unstable mechanisms. A constitutive equation that describes the flow stress of NiTiCuFe multi-component alloy as a function of strain rate and deformation temperature was also determined. (C) The Minerals, Metals & Materials Society and ASM International 2015

Influence of yttria and zirconia additions on spark plasma sintering of alumina composites

The mechanisms of densification and creep were examined during spark plasma sintering (SPS) of alumina doped with a low and high level of zirconia or yttria, over a temperature range of 1173-1573 K and stresses between 25 and 100 MPa. Large additions of yttria led clearly to in situ reactions during SPS and the formation of a yttrium-aluminum garnet phase. Dopants generally lead to a reduction in the densification rate, with substantial reductions noted in samples with similar to 5.5 vol% second phase. In contrast to a stress exponent of n similar to 1 for pure alumina, the doped aluminas displayed n similar to 2 corresponding to an interface-controlled diffusion process. The higher activation energies in the composites are consistent with previous data on creep and changes in the interfacial energies. The results reveal a compensation effect, such that an increase in the activation energy is accompanied by a corresponding increase in the pre-exponential term for diffusion.

Robust design of multiple trailing edge flaps for helicopter vibration reduction: A multi-objective bat algorithm approach

The objective of this study is to determine an optimal trailing edge flap configuration and flap location to achieve minimum hub vibration levels and flap actuation power simultaneously. An aeroelastic analysis of a soft in-plane four-bladed rotor is performed in conjunction with optimal control. A second-order polynomial response surface based on an orthogonal array (OA) with 3-level design describes both the objectives adequately. Two new orthogonal arrays called MGB2P-OA and MGB4P-OA are proposed to generate nonlinear response surfaces with all interaction terms for two and four parameters, respectively. A multi-objective bat algorithm (MOBA) approach is used to obtain the optimal design point for the mutually conflicting objectives. MOBA is a recently developed nature-inspired metaheuristic optimization algorithm that is based on the echolocation behaviour of bats. It is found that MOBA inspired Pareto optimal trailing edge flap design reduces vibration levels by 73% and flap actuation power by 27% in comparison with the baseline design.

Investigation of Annealing Induced Yttria Segregation in Sputtered Yttria-Stabilized Zirconia Thin Films

8mol% yttria-stabilized zirconia (8YSZ) is an extensively studied solid electrolyte. But there is no consistency in the reported ionic conductivity values of 8YSZ thin films. Interfacial segregation in YSZ thin films can affect its ionic conductivity by locally altering the surface chemistry. This article presents the effects of annealing temperature and film thickness on free surface yttria segregation behavior in 8YSZ thin film by Angle Resolved XPS and its influence on the ionic conductivity of sputtered 8YSZ thin films. Surface yttria concentration of about 32, 20, and 9mol% have been found in 40nm 8YSZ films annealed at 1273, 1173, and 1073K, respectively. Yttria segregation is found to increase with increase in annealing temperature and film thickness. Ionic conductivities of 0.23, 0.16, and 0.08Scm(-1) are observed at 923K for 40nm 8YSZ films annealed at 1073, 1173, and 1273K, respectively. The decrease in conductivity with increase in annealing temperature is attributed to the increased yttria segregation with annealing. Neither segregation nor film thickness is found to affect the activation energy of oxygen ion conduction. Target purity is found to play a key role in determining free surface yttria segregation in 8YSZ thin films.

Action of Hopf on the twisted modular Hecke operator

Let Gamma subset of SL2(Z) be a principal congruence subgroup. For each sigma is an element of SL2(Z), we introduce the collection A(sigma)(Gamma) of modular Hecke operators twisted by sigma. Then, A(sigma)(Gamma) is a right A(Gamma)-module, where A(Gamma) is the modular Hecke algebra introduced by Connes and Moscovici. Using the action of a Hopf algebra h(0) on A(sigma)(Gamma), we define reduced Rankin-Cohen brackets on A(sigma)(Gamma). Moreover A(sigma)(Gamma) carries an action of H 1, where H 1 is the Hopf algebra of foliations of codimension 1. Finally, we consider operators between the levels A(sigma)(Gamma), sigma is an element of SL2(Z). We show that the action of these operators can be expressed in terms of a Hopf algebra h(Z).

Morphological Evolution During Synthesis of New AlPO4 Center dot H2O Crystal

A new crystal of aluminophosphate, AIPO(4)(.)H(2)O, is synthesized from two-batch aqueous solution under hydrothermal conditions. Three types of the crystal habits, i.e. the tetragonal double pyramid, the tetragonal prism and the plate-type tetragonal prism, are found from batch-A solution. Two types of the crystal habits, i.e. the hexagonal pyramid and the strip-type tetragonal prism, are found from batch-B solution. The change of crystal morphology is originated from the fluctuation of the synthesis conditions, such as the supersaturation, the temperature and the impurity content. It causes change of the step energies, the defect density and the step roughness, and further, change of the growth rates. Since the crystal morphology is sensitive to the mass transport mechanism, the crystal habits could be changed under the microgravity.

Evaluación de la diversidad de macroinvertebrados edáficos en cinco microcuencas del Río Estelí y Río Viejo Nicaragua

En investigación se determinó la densidad, número de familia y composición de familias de macroinvertebrados encontradas en tres microcuencas de la Subcuenca del Río Estelí y dos microcuenca de la Subcuenca del Río Viejo. En el marco del proyecto UNA/CARE/MARENA/PIMCHAS, 2010. Al mismo tiempo se realizó comparación de la densidad con respecto al uso de suelo. De igual manera, se determinó el cambio de macroinvertebrados en tres profundidades de muestreo (hojarasca, 1 -10cmy 10-25cm) y se agruparon por sus hábitos alimenticios. Para la toma de datos se exploraron los macroinvertebrados en 171 monolitos de 20x20x25 cm repartidos en los sitios de acción del proyecto UNA-CARE-MARENA- PIMCHAS de las microcuencas El Coyote, Las Chichiguas, La Pita, La Laguneta y Tomabú. Los 2,920 individuos identificados se determinaron en 52 familias, 22 órdenes, 7 clases y 4 filums. El número de familias y su composición no varió significativamente entre microcuencas ni entre sitios. Las familias que obtuvieron los mayores valores de abundancia en general fueron: Carabidae, Staphylinidae, Curculionidae, miembros de la clase Diplopoda- d, Formicidae y Scolopendridae. La densidad y el número de familias no variaron significativamente en las tres profundidades estudiadas , pero sí varió la composición de familias. Los individuos con hábitos alimenticios fitófagos y depredadores, además de estar entre los grupos con más individuos por m2 , junto a los fungívoros y xilófagos, tuvieron la mayor variedad de familias. Los usos de tierra en donde se reportaron los mayores números de individuos por m 2 fueron de manera descendente: café con sombra, bosque, granos básicos y pasto. El número de familias no varió significativamente entre los usos, sin embargo la composición de familia si varió.

三峡工程对下游及河口环境的影响分析

本文概括了三峡建库后引起下游水沙动力因子的基本变化，论述了三峡水库对下游及河口生态和环境的主要影响，并通过对目前仍难以确定的一些问题的仔细分析，为长江中下及河口地区的综合开发和环境保护提供准确的科学依据。

Evaluación de diferentes niveles de ofrecimiento de concentrado comercial adicionando forraje verde ad libitum en conejos durante el período de ceba

El ensayo estudió el efecto de cuatro niveles de ofrecimiento de concentrado comercial, adicionando forraje verde ad libitum en conejos durante el período de ceba. El forraje verde suministrado, consistió en una mezcla pi­cada, que contenía en base a peso fresco el 75% de hojas de musa. sp (plátano), 15% de hojas cajanus cajan (gandul) y 15% de hojas de pennisetum purpureum (taiwán). En el tratamiento utilizado como testigo T1, se suministró pienso comercial en cantidades en gramos por día por gazapo de 96, 129, 145, 158 y 162 para las semanas uno, dos, tres y cuatro respectivamente, para el tratamiento T2, se suministró el 75% del concentrado comercial ofrecido en T1, para el trata­ miento T3, se suministró el 50% del concentrado comercial ofre­cido en T1 y para el tratamiento T4, se suministró el 25% del concentrado comercial ofrecido en T1. Se utilizó un D C A (Diseño completamente aleatorio), incluyendo la covariable peso inicial. El período de evaluación fue de 35 días, con un tiempo de adaptación al alimento de 5 días. Las unidades experimentales fueron 22 gazapos al destete de 34 y 35 días de edad, nacidos en la granja, presentado caracteristicas entre las razas: Neozelandis, California, Pardo, Mariposa y Chinchilla. Se encontró efecto significativo al 0.05 para los tratamientos y no significativo al 0.05 para la covariable peso inicial, siendo las variables respuestas: Consumo de concentrado, consumo de forraje, ganancia media diaria, relación consumo de concentrado entre incremento de peso y relación consumo de forraje entre incremento de peso. Se obtuvieron ganancias medias promedios en gramos por día de 32.2, 28.57, 25.03 y 12.82. Los costos de alimentación en córdobas por gazapo en los 35 días de evaluación fueron 8.23, 6.29, 4.33 y 2.39, que se determinaron en base al análisis de presupuestos parciales, obteniendo un beneficio neto en córdobas de 32.95, 31.66, 30.28 y 21.619 para los tratamientos T1, T2, T3 y T4 respectivamente, a una taza de cambio de C$8.05: US$ 1.

Benjamín de Tudela y los motivos del viaje : la educación del judío y el encuentro con la propia identidad a través del otro

Resumen: El presente trabajo aborda un tema concreto: el motivo u objeto con que el maestro y erudito español Benjamín de Tudela (1130-1173) abandona momentáneamente su país, España, para realizar un viaje de más de diez años por el Mediterráneo, el Asia Menor, el Medio Oriente y, aunque es menos probable, el Lejano Oriente. El corpus a considerar es su Libro de viajes (1160-1173), uno de los más completos y didácticos cuadernos de bitácora de la literatura occidental. Esta obra, que ha tenido grandes incidencias en la educación judía de siglos posteriores, es considerada hasta hoy como uno de los primeros documentos demográficos de las comunidades judías de la diáspora. Una vez identificados los motivos que impulsaron un periplo de tal calibre, procederé a analizar básicamente dos. Por un lado, la misión didáctica que él mismo se ha atribuido en consonancia con el precepto que ordena la transmisión intergeneracional de la fe y sus valores. Por otro lado, infiero un motivo que califico como de origen divino o sobrenatural, y que comparo con el viaje de Abraham desde Ur de Caldea hasta la Tierra Prometida. Para desarrollar este punto parto de un fragmento de la Biblia denominado en la tradición judía Lej lejá (Génesis XII:1-XVII:27), del que tomo los dos versículos iniciales, y aplico un análisis hecho por la licenciada y rabina Silvina Chemen con motivo del diálogo interreligioso.