Effect of ambient conditions on dimensional stability and stiffness of commercial paperboard and paperboard trays

The objective of this study was to develop laboratory test methods for characterizing the effects of changed moisture content on paperboard trays produced by press-forming process. Influence of moisture on the properties of unconverted paperboard such as bending stiffness, bursting strength, and curling was studied. Paperboard and tray samples were tested after storing in different relative humidity conditions (35, 50, 65, 80 and 95% RH). The effect of PE and PET extrusion coatings on these properties was also studied. It was found that increase in moisture content of paperboard decreases bending and bursting strength, dimensional stability and stiffness of paperboard trays. Such physical and mechanical properties as bending stiffness and curling of paperboard seem to define the stiffness of ready-made trays and their dimensional stability. Paperboards and trays with extruded PE and PET one sided coatings demonstrated higher strength properties but at the same time had lower dimensional stability comparing to uncoated paperboards. Samples with smaller polymer coat weight had better dimensional stability than respective samples with higher coat weight. It was also found that preconditioning of paperboard in lower humidity environment before press-forming could improve dimensional stability and stiffness of ready-made tray.

Determining vehicle drivetrain dynamics using system identification

Target of this book is to propose an approach for modelling drivetrain dynamics in order to design further a vibration control system of a hybrid bus. In this thesis two approaches are examined and compared. First model is obtained by theoretical means: drivetrain is represented as a system of rotating masses, which motion is described with differential equations. Second model is obtained using system identification method: mathematical description of the dynamic behavior of a system is formed based on measured input (torque) and output (speed) data. Then two models are compared and an optimal approach is suggested.

A economia ecológica e evolucionária de Georgescu-Roegen

The ecological and evolutionary economics of Georgescu-Roegen. The main argument of this paper is that Georgescu-Roegen's contributions represent a major disruption with economics' pre-analytic vision. He rejected at the same time both the closed and circular view of the economy and the mechanic analogies that oriented economics in the past century. Even though his influence has been felt mainly in the field of ecological economics, his epistemological contributions represent a major challenge to equilibrium thinking. Nowadays, treating economic systems as complex and evolutionary systems is becoming not only acceptable, but also a trend in the way political economy is made. We defend that Georgescu-Roegen's disruption represents a scientific revolution in economics, in the sense attributed by Kuhn.

Bases políticas das transferências intergovernamentais no Brasil (1985-2004)

The politics of intergovernmental transfers in Brazil. This article examines the political economy of public resources distribution in Brazil's federal system in 1985-2004. We propose an empirical exercise to analyze how the country's federal governments deal with the tradeoff between the provision of material wellbeing to sub-national governments (the states in our study) and the pursuit of political support from the latter. To identify the determinants of the transfer of resources from the federal government to the states, a set of economic, political, and institutional variables is econometrically tested. Based upon instrumental variables estimation for panel-data models, our estimates indicate that in Brazil the pursuit of political goals prevails over social equity and economic efficiency criteria: higher levels of per capita transfers are associated with the political makeup of governing coalitions, while larger investments in infrastructure and development by the states are associated with a lower amount of per capita resources transferred to sub-national governments. Our findings also suggest a trend toward the freezing of interregional inequalities in Brazil, and show the relevance of fiscal discipline laws in discouraging the use of the administrative apparatus for electioneering.

Energy efficiency of glassmaking production

Master’s thesis Energy efficiency of glassmaking production gives description of glassmaking production and possible energy saving measures. Due to the high electricity and fuel prices the problem of rational energy utilization rises sharply. In addition the environmental issues also require a great attention. This work represented the feasible increasing of the furnace efficiency as the most productive activity. Thesis also provides a detail description of utilizing waste heat boiler. Also possible boiler characteristics are calculated and represented at the end of the thesis. As well as brief description of the feasibility of using this method of energy saving. The solution of this problem has a huge importance. Due to the increasing of energy costs and limits of raw materials, glassmaking industry should overcome on high efficiency operation mode. Especially, if such measures is making a significant contribution in the safety of environment.

Investigation of the applicability of LVDC microgrids in utility distribution in Russia

The research towards efficient, reliable and environmental-friendly power supply solutions is producing growing interest to the “Smart Grid” approach for the development of the electricity networks and managing the increasing energy consumption. One of the novel approaches is an LVDC microgrid. The purpose of the research is to analyze the possibilities for the implementation of LVDC microgrids in public distribution networks in Russia. The research contains the analysis of the modern Russian electric power industry, electricity market, electricity distribution business, regulatory framework and standardization, related to the implementation of LVDC microgrid concept. For the purpose of the economic feasibility estimation, a theoretical case study for comparing low voltage AC and medium voltage AC with LVDC microgrid solutions for a small settlement in Russia is presented. The results of the market and regulatory framework analysis along with the economic comparison of AC and DC solutions show that implementation of the LVDC microgrid concept in Russia is possible and can be economically feasible. From the electric power industry and regulatory framework point of view, there are no serious obstacles for the LVDC microgrids in Russian distribution networks. However, the most suitable use cases at the moment are expected to be found in the electrification of remote settlements, which are isolated from the Unified Energy System of Russia.

Reconstruction of the surface of the Sun from stereoscopic images

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Clones sous-maximaux inf-réductibles

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Incremental Verification of Timing Constraints for Real-Time Systems

Testing constraints for real-time systems are usually verified through the satisfiability of propositional formulae. In this paper, we propose an alternative where the verification of timing constraints can be done by counting the number of truth assignments instead of boolean satisfiability. This number can also tell us how “far away” is a given specification from satisfying its safety assertion. Furthermore, specifications and safety assertions are often modified in an incremental fashion, where problematic bugs are fixed one at a time. To support this development, we propose an incremental algorithm for counting satisfiability. Our proposed incremental algorithm is optimal as no unnecessary nodes are created during each counting. This works for the class of path RTL. To illustrate this application, we show how incremental satisfiability counting can be applied to a well-known rail-road crossing example, particularly when its specification is still being refined.

Privacy animation - INFO2009 Coursework 2 2010, Group 20

Repository contains an animation related to privacy along with the poster for the resource in both jpeg and pdf format.

Reglamentación para la administración y supervisión del riesgo operativo en Colombia. Segunda entrega

El documento de investigación número 31 de la Facultad de Administración, titulado “Reglamentación para la administración y supervisión del riesgo operativo en Colombia”, presentó la investigación relacionada con los avances sobre la reglamentación y supervisión de este riesgo hasta febrero del 2006, no sin antes contextualizar al lector respecto al marco teórico, y los avances realizados en países como México y España. Esta segunda entrega se realiza debido a la pertinencia del tema y a la falta de conocimiento por parte de la academia de lo que en el presente ocurre en las empresas. Este documento de investigación, además de presentar la indagación realizada respecto a la reglamentación para la administración y supervisión del riesgo operativo en Chile, Perú y Ecuador, pretende resaltar el trabajo realizado por Andrei Mosquera Torres respecto al sistema administrativo de riesgo operacional para una sociedad comisionista de bolsa. El mencionado trabajo, desarrollado por Andrei Mosquera para optar por el título como Profesional en Finanzas y Comercio Internacional de la Universidad del Rosario, recoge su experiencia respecto a la administración del riesgo operativo (operacional) en una firma comisionista de bolsa.

La creciente politización del conflicto colombiano

El primer gran propósito de esta investigación es aclarar que el conflictointerno de Colombia está lejos de una supuesta internacionalización. La“internacionalización del conflicto” es, necesariamente, una referencia a la parteexclusivamente militar del mismo.

Análisis de supervivencia en pacientes con prótesis valvular biológica, Fundación Cardioinfantil-Instituto de Cardiología, Colombia, 2005-2013

Introducción: A partir de la década de los cincuenta el manejo de la enfermedad valvular presenta cambios significativos cuando se incorporan los reemplazos valvulares tanto mecánicos como biológicos dentro de las opciones de tratamiento quirúrgico (1). Las válvulas biológicas se desarrollaron como una alternativa que buscaba evitar los problemas relacionados con la anticoagulación y con la idea de utilizar un tejido que se comportara hemodinámicamente como el nativo. Este estudio está enfocado en establecer la sobrevida global y la libertad de reoperación de la válvula de los pacientes sometidos a reemplazo valvular aórtico y mitral biológicos en la Fundación Cardioinfantil - IC a 1, 3, 5 y 10 años. Materiales y métodos: Estudio de cohorte retrospectiva de supervivencia de pacientes sometidos a reemplazo valvular aórtico y/o mitral biológico intervenidos en la Fundación Cardioinfantil entre 2005 y 2013. Resultados: Se obtuvieron 919 pacientes incluidos en el análisis general y 876 (95,3%) pacientes con seguimiento efectivo para el análisis de sobrevida. La edad promedio fue 64años. La sobrevida a 1, 3, 5 y 10 años fue 95%,90%,85% y 69% respectivamente. El seguimiento efectivo para el desenlace reoperación fue del 55% y se encontró una libertad de reoperación del 99%, 96%, 93% y 81% a los 1, 3, 5 y 10 años. No hubo diferencias significativas entre la localización de la válvula ni en el tipo de válvula aortica empleada. Conclusiones: La sobrevida de los pacientes que son llevados a reemplazo valvular biológico en este estudio es comparable a grandes cohortes internacionales. La sobrevida de los pacientes llevados a reemplazo valvular con prótesis biológicas en posición mitral y aortica fue similar a 1, 3, 5 y 10 años.