Robustness of timber structures in seismic areas

Some of the properties sought in seismic design of buildings are also considered fundamental to guarantee structural robustness. Moreover, some key concepts are common to both seismic and robustness design. In fact, both analyses consider events with a very small probability of occurrence, and consequently, a significant level of damage is admissible. As very rare events,in both cases, the actions are extremely hard to quantify. The acceptance of limited damage requires a system based analysis of structures, rather than an element by element methodology, as employed for other load cases. As for robustness analysis, in seismic design the main objective is to guarantee that the structure survives an earthquake, without extensive damage. In the case of seismic design, this is achieved by guaranteeing the dissipation of energy through plastic hinges distributed in the structure. For this to be possible, some key properties must be assured, in particular ductility and redundancy. The same properties could be fundamental in robustness design, as a structure can only sustain significant damage if capable of distributing stresses to parts of the structure unaffected by the triggering event. Timber is often used for primary load‐bearing elements in single storey long‐span structures for public buildings and arenas, where severe consequences can be expected if one or more of the primary load bearing elements fail. The structural system used for these structures consists of main frames, secondary elements and bracing elements. The main frame, composed by columns and beams, can be seen as key elements in the system and should be designed with high safety against failure and under strict quality control. The main frames may sometimes be designed with moment resisting joints between columns and beams. Scenarios, where one or more of these key elements, fail should be considered at least for high consequence buildings. Two alternative strategies may be applied: isolation of collapsing sections and, provision of alternate load paths [1]. The first one is relatively straightforward to provide by deliberately designing the secondary structural system less strong and stiff. Alternatively, the secondary structural system and the bracing system can be design so that loss of capacity in the main frame does not lead to the collapse. A case study has been selected aiming to assess the consequences of these two different strategies, in particular, under seismic loads.

Análise comparativa de métodos de prospeção direta e indireta na determinação do topo rochoso para fundações

Com o decorrer dos tempos e com a evolução da indústria, acresce a necessidade de aparecimento de novas construções e consequentemente de novos desafios geotécnicos. Para responder a estes novos reptos que a construção nos lança é necessário aprofundar o conhecimento acerca dos materiais que constituem o subsolo e estudar o seu comportamento quando sujeito a novas solicitações, como por exemplo sobrecargas, pois parte do cálculo de dimensionamento de fundações das novas construções dependerá destas características. Existem duas possíveis formas de identificar os materiais existentes no subsolo e caracterizá‐los: através de ensaios de laboratório e de ensaios in situ, sendo nestes últimos que nos iremos focar. Os ensaios in situ, para além de outros dados, permitem‐nos estimar com algum grau de incerteza a profundidade a que se encontra o horizonte com capacidade de suporte pretendida, quer se trate ou não do bedrock, e identificar o processo mais indicado para a retirada do material: através de um meio mecânico de escavação ou por recurso a explosivos. Com a realização de ensaios de sísmica de refração e igualmente recorrendo a ensaios executados com o penetrómetro dinâmico médio (DPM), tentamos dar resposta a estas incógnitas através do cruzamento dos dados obtidos. No entanto, este cruzamento de dados pode não ser completamente esclarecedor, levando ao aparecimento de novas incógnitas às quais não seja possível dar resposta recorrendo‐se unicamente à informação recolhida por meio destes dois métodos, pois poderão revelar‐se insuficientes. Contudo, existem muitos outros ensaios in situ que podem ser realizados e capazes de nos ajudar a complementar os dados inicialmente obtidos no sentido de diminuir ou até mesmo eliminar as incógnitas existentes, e desta forma poder identificar e caraterizar o material existente com o maior grau de segurança possível.

Analysis of the Out-Of-Plane Seismic Behavior of Unreinforced Masonry: A Literature Review

Although the issue of the out-of-plane response of unreinforced masonry structures under earthquake excitation is well known with consensus among the research community, this issue is simultaneously one of the more complex and most neglected areas on the seismic assessment of existing buildings. Nonetheless, its characterization should be found on the solid knowledge of the phenomenon and on the complete understanding of methodologies currently used to describe it. Based on this assumption, this article presents a general framework on the issue of the out-of-plane performance of unreinforced masonry structures, beginning with a brief introduction to the topic, followed by a compact state of art in which the principal methodologies proposed to assess the out-of-plane behavior of unreinforced masonry structures are presented. Different analytical approaches are presented, namely force and displacement-based, complemented with the presentation of existing numerical tools for the purpose presented above. Moreover, the most relevant experimental campaigns carried out in order to reproduce the phenomenon are reviewed and briefly discussed.

Efficiency of strengthening techniques assessed for existing masonry buildings

The Azores archipelago is a zone with a vast cultural heritage, presenting a building stock mainly constructed in traditional stone masonry. It is known that this type of construction exhibits poor behaviour under seismic excitations; however it is extensively used in seismic prone areas, such as this case. The 9th of July of 1998 earthquake was the last seismic event in the islands, leaving many traditional stone constructions severely damaged or totally destroyed. This scenario led to an effort by the local government of improving the seismic resistance of these constructions, with the application of several reinforcement techniques. This work aims to study some of the most used reinforcement schemes after the 1998 earthquake, and to assess their effectiveness in the mitigation of the construction’s seismic vulnerability. A brief evaluation of the cost versus benefit of these retrofitting techniques is also made, seeking to identify those that are most suitable for each building typology. Thus, it was sought to analyze the case of real structures with different geometrical and physical characteristics, by establishing a comparison between the seismic performance of reinforced and non-reinforced structures. The first section contains the analysis of a total of six reinforcement scenarios for each building chosen. Using the recorded 1998 earthquake accelerograms, a linear time-history analysis was performed for each reinforcement scenario. A comparison was then established between the maximum displacements, inter-storey drift and maximum stress obtained, in order to evaluate the global seismic response of each reinforced structure. In the second part of the work, the examination of the performance obtained in the previous section, in relation to the cost of implementing each reinforcement technique, allowed to draw conclusions concerning the viability of implementing each reinforcement method, based on the book value of the buildings in study.

Flexural strengthening by means of a arc overlay in the tension zone

Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Perfil de Estruturas

Epidemiologic studies of chagas' disease in the urban zone of Teresina. State of Piauí, northeastern Brazil

The triatomine species Rhodnius nasutus and Triatoma pseudomaculata were captured on palm trees Orbignya martiana "babaçu ", in the urban zone of Teresina. This kind of palm tree is largely distributed in Piauí State. The predominant species was R. nasutus; the young in stars predominated. The infestation index of palm trees and the infection index of triatomines by flagellates were 96.0 ana 29.1%, respectively. Marsupiais, bats and a rodent were captured in palm trees. The flagellates found in both triatomines ana marsupiais were morphologically and biologically indistinguishable from Trypanosoma cruzi. Forty seven percent (481/1,025) of triatomines were found concentrated in six palm trees where marsupiais circulated. Of the total of 1,025 triatomines 230 (22%) were infected by flagellates and 53.0% (123/230) of these infected triatomines were present in the same six palm trees. No evidence of triatomine domiciliation or human transmission was observed in the houses in the vicinity of palm trees. The results suggest that marsupiais play an important role in the life-cycle of T. cruzi in this region. The natural focus of Chagas' disease, demonstrated in the present study could represent a potential epidemiological threat.

Presence of anti-Toxoplasma antibodies in humans and their cats in the urban zone of Guadalajara

Cats are the definitive hosts of Toxoplasma gondii. Infected cats excrete oocysts in their feces, infecting humans and other animals. The objective of the present study was to determine the presence of anti-Toxoplasma antibodies in cat owners and their pets, and determine if there was a relationship between Toxoplasma infection and humans who live with infected cats. IgG anti-Toxoplasma antibodies in sera of 59 cat owners were determined by enzyme-linked immunosorbent assay (ELISA), in 24 sera from their cats, IgG, IgM, and IgA antibodies were found using Burney's ELISA. Thirty-eight (64%) of 59 cat owners were positive to IgG anti-Toxoplasma. Seropositivity for cats was 70.8% IgG, 8.3% IgM, and 62.5% IgA. Cohabitation with cats infected by T. gondii, feeding with leftovers or raw viscera, and lack of control over how their feces were handled are risk factors conducive for humans to become infected by T. gondii.

Migration and differentiation of neuronal precursors in the postnatal brain: insights from the subventricular zone and cerebellum

Fundação para a Ciência e a Tecnologia - SFRH/BD/42848/2008, através do Programa MIT_Portugal em Sistemas de Bioengenharia; projectos PTDC/SAUNEU/104415/2008 e Projecto ref. 96542 da Fundação Caloust Gulbenkian

First record on Loxosceles laeta (Nicolet, 1849) (Araneae, Sicariidae) in the West Zone of São Paulo City, São Paulo, Brazil, and considerations regarding its geographic distribution

Loxosceles laeta spiders were captured in the West zone of São Paulo City, this being the first record of the specie in this area. Since loxoscelism is an important public health problem in the South region of Brazil, it is necessary to investigate the presence of this spider in São Paulo City.

Precast concrete wall-foundation connection. Development of a seismic dissipative connection

Seismic events are a major factor to consider in structural design of buildings in many countries. With the purpose of saving lives, most of the design codes lead to structural solutions that withstand large seismic actions without collapsing, but without taking into account a possible usage of the structures after the earthquake. As a result, it is necessary to consider the time needed to repair/retrofit the damaged structures (i.e. the downtime) since this period of inactivity may result in huge financial implications for the occupants of the buildings. In order to minimise the damages and simplify repair operations, structural solutions with rocking systems and negligible residual displacements have been developed during the last two decades. Systems with precast concrete rocking walls were studied with the aim of investigat- ing suitable and convenient structural alternatives to minimise the damage in case of an earthquake. Experimental, numerical and analytical analyses on post-tensioned solutions, with and without energy dissipation devices, were carried out in this research. The energy dissipation devices were made from steel angles that were further developed during the research. Different solutions for these devices were experimentally tested under cyclic loading and the results are presented. Numerical and analytical work on steel angles was also carried out. Regarding the concrete rocking wall systems, two concrete rocking wall systems were studied: post-tensioned walls and post-tensioned walls with energy dissipation devices. In the latter, the solution was to fix them externally to the wall, allowing their easy replacement after an earthquake. It is shown that the dissipaters are a viable solution for use in precast concrete rocking wall systems. A building case study is presented. The comparison between a traditional monolithic system and a hybrid solution was carried out, allowing the evaluation of the efficiency of the solution that was developed.

Seroepidemiology of Trypanosoma cruzi infection in the semiarid rural zone of the State of Rio Grande do Norte, Brazil

INTRODUCTION: A seroepidemiological survey was carried out to evaluate Trypanosoma cruzi infection in an endemic area of the State of Rio Grande do Norte, Brazil, involving rural residents. METHODS: Sixteen municipalities were randomly selected, 15 from the west mesoregion and one from the central, with an estimated population of 83,852 individuals. A total of 1,950 blood samples were collected in the west mesoregion and 390 in Caicó. Anti-T. cruzi antibodies were detected using the Chagatest® ELISA HAI-hemagglutination kits and indirect immunofluorescence. As sera presented indeterminate results, TESAcruzi® western blot was performed to confirm reactivity. RESULTS: An estimated seroprevalence of 6.5% was determined for the west mesoregion and 3.3% for Caicó. Seropositivity rises progressively with the age of individuals, up to 40 years in Caicó and up to 50 years in the west mesoregion. Only educational level and knowledge regarding the triatomine were associated with seropositivity. No seroreactive individuals under 18 years of age were identified. CONCLUSIONS: Infection by T. cruzi remains high and is concentrated in municipalities in the central western area of the west mesoregion; however, evidence suggests a decline in vector transmission in this mesoregion and in Caicó. Epidemiological variables appear not to influence seropositivity, with the exception of education and knowledge concerning the triatomine, among seroreactive individuals from the west mesoregion.

Strengthening to seismic action of reinforced columns with rectangular cross-section

The first part of this research work regards the assessment of the mathematical modelling of reinforced concrete columns confined with carbon fibre (CFRP) sheets under axial loading. The purpose was to evaluate existing analytical models, contribute to possible improvements and choose the best model(s) to be part of a new model for the prediction of the behaviour of confined columns under bending and compression. For circular columns, a wide group of authors have proposed several models specific for FRP-confined concrete. The analysis of some of the existing models was carried out by comparing these with several tested columns. Although several models predict fairly the peak load only few can properly estimate the load-strain and dilation behaviour of the columns. Square columns confined with CFRP show a more complex interpretation of their behaviour. Accordingly, the analysis of two experimental programs was carried out to propose new modelling equations for the whole behaviour of columns. The modelling results show that the analytical curves are in general agreement with the presented experimental curves for a wide range of dimensions. An analysis similar to the one done for circular columns was this turn carried out for square columns. Few models can fairly estimate the whole behaviour of the columns and with less accuracy at all levels when compared with circular columns. The second part of this study includes seven experimental tests carried out on reinforced concrete rectangular columns with rounded corners, different damage condition and with confinement and longitudinal strengthening systems. It was concluded that the use of CFRP confinement is viable and of effective performance enhancement alone and combined with other techniques, maintaining a good ductile behaviour for established threshold displacements. As regards the use of external longitudinal strengthening combined with CFRP confinement, this system is effective for the performance enhancement and viable in terms of execution. The load capacity was increased significantly, preserving also in this case a good ductile behaviour for threshold displacements. As to the numerical nonlinear modelling of the tested columns, the results show a variation of the peak load of 1% to 10% compared with tests results. The good results are partly due to the inclusion of the concrete constitutive model by Mander et al. modified by Faustino, Chastre & Paula taking into account the confinement effect. Despite the reasonable approximation to tests results, the modelling results showed higher unloading, which leads to an overestimate dissipated energy and residualdisplacement.

Transfer zone of prestressed CFRP reinforcement applied according to NSM technique for strengthening of RC structures

This study presents an experimental program to assess the tensile strain distribution along prestressed carbon fiber reinforced polymer (CFRP) reinforcement flexurally applied on the tensile surface of RC beams according to near surface mounted (NSM) technique. Moreover, the current study aims to propose an analytical formulation, with a design framework, for the prediction of distribution of CFRP tensile strain and bond shear stress and, additionally, the prestress transfer length. After demonstration the good predictive performance of the proposed analytical approach, parametric studies were carried out to analytically evaluate the influence of the main material properties, and CFRP and groove cross section on the distribution of the CFRP tensile strain and bond shear stress, and on the prestress transfer length. The proposed analytical approach can also predict the evolution of the prestress transfer length during the curing time of the adhesive by considering the variation of its elasticity modulus during this period.

Experimental analysis of the cyclic response of traditional timber joints and their influence on the seismic capacity of timber frame structures

Timber connections represent the crucial part of a timber structure and a great variability exists in terms of types of connections and mechanisms. Taking as case study the widespread traditional timber frame structures, in particular the Portuguese Pombalino buildings, one of the most common timber connection is the half-lap joint. Connections play a major role in the overall behaviour of a structure, particularly when assessing their seismic response, since damage is concentrated at the connections. For this reason, an experimental campaign was designed and distinct types of tests were carried out on traditional half-lap joints to assess their in-plane response. In particular, pull-out and in-plane cyclic tests were carried out on real scale unreinforced connections. Subsequently, the connections were retrofitted, using strengthening techniques such as self-tapping screws, steel plates and GFRP sheets. The tests chosen were meant to capture the hysteretic behaviour and dissipative capacity of the connections and characterise their response and, therefore, their influence on the seismic response of timber frame walls, particularly concerning their uplifting and rotation capacity, that could lead to rocking in the walls. In this paper, the results of the experimental campaign are presented in terms of hysteretic curves, dissipated energy and equivalent viscous damping ratio. Moreover, recommendations are provided on the most appropriate retrofitting solutions.