Avaliação de duas variedades de cana-de-açúcar submetidas a diferentes tempos de armazenamento

Foram estudadas duas variedades de cana-de-açúcar (CO 413 e RB 72 454), com o objetivo de verificar o efeito do armazenamento pós-corte sobre suas características tecnológicas e bromatológicas. As variedades foram cortadas e armazenadas durante zero, 1,5, 3,0 e 4,5 dias. Utilizou-se o delineamento inteiramente casualizado em esquema fatorial 2 x 4 . A variedade RB 72 454 apresentou melhor maturação que a variedade CO 413. O armazenamento proporcionou aumento no teor de açúcares redutores (P<0,01) e diminuição no teor protéico (P<0,01) das variedades de cana em estudo. A variedade RB 72 454 apresentou maior teor de matéria seca (P<0,01). Ambas as variedades, quando armazenadas durante 4,5 dias, apresentaram queda de 14,66 e 4,04% nos teores de proteína bruta e energia bruta, respectivamente.

Caracterização físico-química, bioquímica e funcional da jabuticaba armazenada sob diferentes temperaturas

O presente trabalho teve como objetivo avaliar a qualidade pós-colheita de jabuticabas submetidas a diferentes temperaturas de armazenamento refrigerado (AR). Após a colheita, os frutos fisiologicamente maduros foram acondicionados em bandejas de poliestireno expandido (EPS), revestidas por filme plástico de polietileno de baixa densidade (PEBD) e armazenados sob refrigeração a 0; 3; 6; 9 e 12 ± 1ºC e U.R. 87 ± 2%, sendo avaliados a cada 5 dias. Os frutos foram avaliados quanto à perda de massa, atividade respiratória, pH, acidez titulável, sólidos solúveis, ácido ascórbico, textura, pectina total e solúvel, atividade da enzima polifenoloxidase (PFO), compostos fenólicos e atividade antioxidante. Para frutos refrigerados a 9 e 12ºC, o pico respiratório atrasou em relação aos demais tratamentos, além de apresentarem as menores taxas respiratórias. O teor de sólidos solúveis aumentou com o tempo de armazenamento para todas as temperaturas, contudo, em 9 e 12ºC, esse aumento foi em menor proporção. A firmeza e o teor de ácido ascórbico também foram superiores nos frutos armazenados a 9 e 12ºC, enquanto os contéudos de pectina solúvel foram menores. Observou-se a diminuição da atividade da enzima PFO ao longo dos 30 dias do AR, independentemente da temperatura utilizada; entretanto, os menores valores foram encontrados nos frutos mantidos a 9 e 12ºC. Os frutos armazenados a 12ºC apresentaram os maiores conteúdos de compostos fenólicos totais e a maior atividade antioxidante ao final do experimento. Nesse sentido, a temperatura de 12ºC foi a mais efetiva na manutenção da qualidade pós-colheita das jabuticabas.

Esverdeamento em cultivares de batata avaliado pela escala visual e índice spad

Foi avaliado o esverdeamento em tubérculos de cultivares de batata utilizando dois métodos de determinação (escala visual de notas e índice spad). Utilizou-se o delineamento experimental inteiramente casualizado, com quatro repetições, em esquema fatorial 18 x 5, constituído por cultivares (Agata, Apuã (IAC-5977), Aracy (IAC-2), IAC Aracy Ruiva, Asterix, Bintje, Dali, Clone IAC-6090, Itararé (IAC-5986), Laguna, Remarka, Liseta, Mondial, Novita, Oscar, Picasso, Santana e Solide) e tempo de armazenamento (5; 10; 15; 20 e 25 dias). Todas as cultivares apresentaram desempenho linear e crescente pelo índice spad, com excecão da Bintje, com spad médio de 1,23. Pela escala visual, as cultivares apresentaram desempenho quadrático e linear. A cultivar Bintje é resistente ao esverdeamento determinado pelos dois métodos. O índice spad pode ser utilizado para determinação do esverdeamento do 10º ao 25º dia de armazenamento.

Resistance of stored bean varieties to Acanthoscelides obtectus (Coleoptera : Bruchidae)

During bean seed storage, yield can be lost due to infestations of Acanthoscelides obtectus Say, the bean weevil. The use of resistant varieties has shown promising results in fighting these insects, reducing infestation levels and eliminating chemical residues from the beans. The expression of resistance to A. obtectus in bean varieties is frequently attributed to the presence of phytohemagglutinins, protease inhibitors and alpha-amylase, and especially to variants of the protein arcelin, which reduce the larval viability of these insects. To evaluate the effect of bean seed storage time on the resistance expression of bean varieties to A. obtectus, tests with seeds of three ages (freshly-harvested, 4-month-old, and 8-month-old) were conducted in the laboratory, using four commercial varieties: Carioca Pitoco, Ipa 6, Porrillo 70, Onix; four improved varieties containing arcelin protein: Are. 1, Arc.2, Arc. 3, Arc.4; and three wild varieties also containing arcelin protein: Arc. IS, Arc.3S, and Arc. 5S. The Arc.5S, Arc. IS, and Arc.2 varieties expressed high antibiosis levels against the weevil; Arc. I and Arc3S expressed the same mechanism, but at lower levels. The occurrence of oviposition non-preference was also observed in Arc.5S and Arc. IS. The Arc.3 and Arc. 4 varieties expressed low feeding non-preference levels against A. obtectus. The expression of resistance in arcelin-bearing, wild or improved varieties was affected during the storage of seeds, and was high under some parameters but low in others. The results showed that addition of chemical resistance factors such as protein arcelin via genetic breeding may be beneficial in improving the performance of bean crops.

Qualidade fisiológica e armazenamento de sementes de milheto em função da época de semeadura

Pearl millet is recommended to produce dry matter for no-tillage system, as forage or for grain yield. The sowing time affects the crop development; thus, it can affect seed quality and initial storage conditions. The present research had as objective to evaluate the effects of sowing time on pearl millet seeds quality during the storage. Pearl millet seeds from twelve monthly sowing times were stored in environmental conditions, with no temperature and relative humidity control, and evaluated by seed moisture content, germination and vigor (first count of the germination test and electrical conductivity) for 0, 27 and 42 months of storage. The completely random design was employed, as a factorial experiment 12 x 3 (sowing time x storage time), with four replications. Means were compared by Tukey test (p <= 0.05). Pearl millet seeds produced in September resulted in the production of seeds with high germination and vigor, evaluated by the electrical conductivity test. The capacity of quality conservation of pearl millet seeds, for different storage times, is related to crop sowing time.

Longevidade de sementes de camu-camu submetidas a diferentes ambientes e formas de conservação

O camu-camu (Myrciaria dubia (H.B.K.) McVaugh) produz fruto com grande potencial para extração de ácido ascórbico, que apresenta relevante importância econômica e social, com inúmeras aplicações industriais. O objetivo deste trabalho foi avaliar o efeito de diferentes formas de conservação e ambientes de armazenamento, sobre a manutenção da viabilidade das sementes. O delineamento experimental inteiramente casualizado, utilizando parcelas subsubdivididas, onde os fatores foram: ambiente de armazenamento (ao ar livre, em água, em câmara a 5 e a 10 ºC), forma de conservação (sementes com polpa - CP, sementes sem polpa - SP e sementes lavadas e tratadas - LT) e período de armazenamento (0; 2; 4 e 6 meses). O critério de avaliação adotado foi a protrusão da raiz primária. As sementes armazenadas em água, nas formas SP e LT, apresentaram germinação maior que 90%. As sementes nas formas CP e LT, armazenadas a 5 e a 10 ºC, tiveram germinação acima de 89%. O armazenamento em água e ao ar livre não afetou a germinação, podendo as sementes serem armazenadas durante o período de seis e quatro meses, respectivamente. As sementes CP, armazenadas em água, tiveram menor tempo médio para germinação. O índice de velocidade de germinação aumentou com o período de armazenamento e foi maior nas sementes armazenadas na água em todos os períodos. As sementes com polpa apresentaram menor índice de velocidade de germinação em todo o período de armazenamento avaliado.

Desenvolvimento de sistemas micro e nanoestruturados de quitosana/MDI para aplicações cosméticas

Currently, studies in the area of polymeric microcapsules and nanocapsules and controlled release are considerably advanced. This work aims the study and development of microcapsules and nanocapsules from Chitosan/MDI, using a new technique of interfacial polycondensation combined to spontaneous emulsification, for encapsulation of BZ-3. It was firstly elaborated an experimental design of 23 of the particle in white without the presence of BZ-3 and Miglyol, where the variables were the concentrations of MDI, chitosan and solvent. Starting from the data supplied by the experimental design was chosen the experiment with smaller particle diameter and only added like this BZ-3 and Miglyol. The suspension containing concentrations of 6.25 mg/mL, 12.5 mg/mL, 18.75 mg/mL, 25 mg/mL of BZ-3 were prepared, nevertheless, during the storage time, these formulations presented drug precipitates in the suspensions of 18.75 mg/mL and 25 mg/mL of BZ-3. This apparition of precipitate was attributed to the diffusion of BZ-3 for the aqueous phase without any encapsulation, suggesting so the use of the smaller concentrations of the BZ-3. The suspension containing 6.25mg/mL of BZ3 presented average size of 1.47μm, zeta potential of 61 mV, pH 5.64 and this sample showed an amount of BZ-3 and drug entrapment of 100 %. The suspension containing 12.5mg/mL of BZ-3 presented average size of 1.76μm, zeta potential of 47.4 mV, pH 5.71 and this sample showed an amount of BZ-3 and drug entrapment of 100 %. Then, showing such important characteristics, these two formulations were chosen for futher continuity to the study. These formulations were also characterized by the morphology, FTIR, stability for Turbiscan, DSC and a study of controlled release of the BZ-3 was elaborated in different receiving means

Posição do racemo e do fruto na qualidade fisiológica de sementes de mamona durante o armazenamento

The present research had as objective to evaluate the influence of raceme and fruit position on physiological quality of castor bean seeds (Ricinus communis L.) during storage of cultivar AL Guarany 2002. The treatments were: position of the raceme in plants (primary, secondary and tertiary) and position of fruit in racemes (low, medium and high). After fruit extraction, seeds were stored under environmental conditions for twelve months. The experimental design used was the completely randomized in a split-plot arrangement. Main plots consisted of the interaction raceme x fruit position and subplots were the storage time. Physiological quality was evaluated quarterly through tests of moisture content, germination and vigor (first count, accelerated aging, seedling length and seedling dry matter). Neither the position of racemes in the plant nor fruit in racemes does not affect germination of castor bean seeds. Dormancy of castor bean seeds decreases during storage, but also increases percentage of abnormal seedlings, seedling dry matter and root, hypocotyl and seedling total length.

Color Stability Comparison of Silicone Facial Prostheses Following Disinfection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of microwave disinfection on the hardness and adhesion of two resilient liners

Statement of problem. Microwave irradiation has been suggested for denture disinfection. However, the effect of this procedure on the hardness and bond strength between resilient liners and denture base acrylic resin is not known.Purpose. This study evaluated the effect of water storage time and microwave disinfection on the hardness and peel bond strength of 2 silicone resilient lining materials to a heat-polymerized acrylic resin.Material and methods. Acrylic resin (Lucitone 199) specimens (75 X 10 X 3 mm) were stored in water at 37 degrees C (2 or 30 days) before bonding (n = 160). The resilient lining materials (GC Reline Extra Soft and Dentusil) were bonded to the denture base and divided into the following 4 groups (n = 10): Tests performed immediately after bonding (control); specimens immersed in water (200 mL) and irradiated twice, with 650 W for 6 minutes; specimens irradiated daily for 7 total cycles of disinfection; specimens immersed in water (37 degrees C) for 7 days. Specimens were submitted to a 180-degree peel test (at a crosshead speed of 10 mm/min) and the failure values (MPa) and mode of failure were recorded. Pretreatment and posttreatment hardness measurements (Shore A) of the resilient materials were also performed. Three-way analysis of variance, followed by the Tukey HSD test, was performed (alpha=.05).Results. The analysis revealed that, for all conditions, the mean failure strengths of GC Reline Extra Soft (0.95-1.19 MPa) were significantly higher (P<.001) than those of Dentusil (0.45-0.50 MPa). The adhesion of the liners was not adversely affected by water storage time of Lucitone 199 or microwave disinfection. All peel test failures were cohesive. There was a small but significant difference (P<.001) between the pretreatment (34.33 Shore A) and posttreatment (38.69 Shore A) hardness measurements.Conclusion. Microwave disinfection did not compromise the hardness of either resilient liners or their adhesion to the denture base resin Lucitone 199.

Shear Bond Strength of Different Repair Systems to Titanium After Water Aging

This study evaluated the shear bond strength (SBS) and stability of commercially pure titanium (CP Ti)/repair material interfaces promoted by different repair systems. One hundred CP Ti cast discs were divided into five repair system groups: 1) Epricord (EP); 2) Bistite 11 DC (BT); 3) Cojet (CJ); 4) Scotchbond Multi-Purpose Plus (SB) (control group); and 5) Cojet Sand plus Scotchbond Multi-Purpose Plus (CJSB). The specimens were stored in distilled water for 24 hours at 37 degrees C, thermal cycled (5000 cycles, 5 degrees-55 degrees C) and stored under the same conditions for either 24 hours or six months (n=10). SBS was tested and the data were analyzed by two-way analysis of variance (ANOVA) and Tukey test (alpha=.05). Failure mode was determined with a stereomicroscope (20x). The repair system, storage time, and their interaction significantly affected the SBS (p<0.001). At 24 hours, CJSB exhibited the highest SBS value, followed by CJ. At six months, these two groups had similar mean SBS (p>0.05) and higher means in comparison to the other groups. For both storage times, BT presented the lowest SBS, while the EP and SB groups did not differ significantly from one another (p>0.05). There were no significant differences in SBS between the storage times for the groups EP and CJ (p>0.05). The groups BT, SB, and CJSB showed 100% adhesive failure, irrespective of storage time. The CJSB group showed the highest SBS at both storage times. At six months, the CJ group exhibited a similar SBS mean value when compared to the CJSB group. Water storage adversely affected the groups BT, SB (control group), and CJSB. Considering SBS values, stability, and the failure mode simultaneously, the CJ group showed the best CP Ti repair performance.

Effect of tartrate content on aging and deposition condition of copper-tin electrodeposits from a non-cyanide acid bath

The effect of the presence of tartrate additive on the chemical stability of a Cu-Sn acid bath was evaluated. It was observed that this additive hinders decomposition of the Cu/Sn deposition bath with storage time, since the decrease in electrochemical efficiency was attenuated. In addition, it was observed that optimal galvanostatic deposition with or without tartrate occurs at approximately 11 mA cm(-2). However, in the presence of tartrate the deposition charge was lower, leading to lower energy consumption. SEM analysis showed that the tartrate added to the plating bath caused a marked change in the morphology of the Cu/Sn films obtained gal vanostatic ally. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Effect of Cement Shade and Light-curing Unit on Bond Strength of a Ceramic Cemented to Dentin

Purpose: To evaluate the effect of cement shade, light-curing unit, and water storage on tensile bond strength (a) of a feldspathic ceramic resin bonded to dentin.Materials and Methods: The dentin surface of 40 molars was exposed and etched with 37% phosphoric acid, then an adhesive system was applied. Forty blocks of feldspathic ceramic (Vita VM7) were produced. The ceramic surface was etched with 10% hydrofluoric acid for 60 s, followed by the application of a silane agent and a dual-curing resin cement (Variolink II). Ceramic blocks were cemented to the treated dentin using either A3 or transparent (Tr) shade cement that was activated using either halogen or LED light for 40 s. All blocks were stored in 37 degrees C distilled water for 24 h before cutting to obtain non-trimmed bar-shaped specimens (adhesive area = 1 mm(2) +/- 0.1) for the microtensile bond strength test. The specimens were randomly grouped according to the storage time: no storage or stored for 150 days in 37 degrees C distilled water. Eight experimental groups were obtained (n = 30). The specimens were submitted to the tensile bond strength test using a universal testing machine at a crosshead speed of 1 mm/min. The data were statistically analyzed using ANOVA and Tukey's post-hoc tests (alpha = 0.05).Results: The mean bond strength values were significantly lower for the corresponding water stored groups, except for the specimens using A3 resin cement activated by halogen light. There was no significance difference in mean bond strength values among all groups after water storage.Conclusion: Water storage had a detrimental effect under most experimental conditions. For both cement shades investigated (Tr and A3) under the same storage condition, the light-curing units (QTH and LED) did not affect the mean microtensile bond strengths of resin-cemented ceramic to dentin.

Effect of dietary organic selenium and zinc on the internal egg quality of quail eggs for different periods and under different temperatures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

EMBALAGEM INDIVIDUAL DE MANGAS CV. TOMMY ATKINS em FILME PLÁSTICO: EFEITO SOBRE A VIDA DE PRATELEIRA

Estudou-se o efeito da embalagem de policloreto de vinila (PVC) sobre a vida de prateleira de mangas cv. Tommy Atkins armazenadas sob refrigeração. Mangas no estádio de maturidade fisiológica, com casca verde ou levemente avermelhada, foram embaladas individualmente, com filme de 10mm de espessura, e armazenadas por 28 dias a 12ºC (80-90% UR). Frutos sem embalagem serviram de controle. Durante o período de armazenagem, foram feitas avaliações sensoriais utilizando o método de escala hedônica não estruturada para aceitação da aparência e do sabor, utilizando-se de 30 provadores não treinados por sessão. Determinou-se também a perda de massa, a acidez titulável e os teores de sólidos solúveis e vitamina C ao longo da armazenagem. As mangas embaladas apresentaram uma vida de prateleira de 21 dias contra 6 dias das não embaladas, e uma taxa de perda de massa 3,5 vezes menor que as não embaladas. em relação à taxa de degradação de vitamina C, não houve diferença entre os tratamentos. A combinação da embalagem com a armazenagem a 12ºC aumentou a vida de prateleira do produto pela redução da atividade metabólica e do desenvolvimento de podridão.