The fatigue and degradation mechanisms of hoisting ropes

Based upon specialised experience of rope mechanics spanning over 20 years, this paper reviews the processes of degradation and fatigue that are relevant to hoisting ropes in mines. The review is brought up to date with an account of the most recent work in this field, which identifies a torsional fatigue process and quantifies the impact of degradation upon the residual service life. A proper understanding of these processes is important in determining how different parameters of hoist design and operation interact to determine rope life. This knowledge is also important in informing decisions relating to rope discard based upon observed condition, as well is identifying the critical features that must be quantified reliably during inspection.

Modelling fatigue damage distribution to inform slip and cut policy for riser tensioner ropes

The paper describes a method whereby the distribution of fatigue damage along riser tensioner ropes is calculated, taking account of heave motion, set tension, system geometry, tidal range and rope specification. From these data the distribution of damage along the rope is calculated for a given time period using a Miner’s summation method. This information can then be used to help the operator decide on the length of rope to ‘slip and cut’ whereby a length from the end of the rope is removed and the rope moved through the system from a storage drum such that sections of rope that have already suffered significant fatigue damage are not moved to positions where there is another peak in the distribution. There are two main advantages to be gained by using the fatigue damage model. The first is that it shows the amount of fatigue damage accumulating at different points along the rope, enabling the most highly damaged section to be removed well before failure. The second is that it makes for greater efficiency, as damage can be spread more evenly along the rope over time, avoiding the need to scrap long sections of undamaged rope.

Torque in mooring chain. Part 1: Background and theory

Chain in both its forms - common (or stud-less) and stud-link - has many engineering applications. It is widely used as a component in the moorings of offshore floating systems, where its ruggedness and corrosion resistance make it an attractive choice. Chain exhibits some interesting behaviour in that when straight and subject to an axial load it does not twist or generate any torque, but if twisted or loaded when in a twisted condition it behaves in a highly non-linear manner, with the torque dependent upon the level of twist and axial load. Clearly an understanding of the way in which chains may behave and interact with other mooring components (such as wire rope, which also exhibits coupling between axial load and generated torque) when they are in service is essential. However, the sizes of chain that are in use in offshore moorings (typical bar diameters are 75 mm and greater) are too large to allow easy testing. This paper, which is in two parts, aims to address the issues and considerations relevant to torque in mooring chain. The first part introduces a frictionless theory that predicts the resultant torques and 'lift' in the links as non-dimensionalized functions of the angle of twist. Fortran code is presented in an Appendix, which allows the reader to make use of the analysis. The second part of the paper presents results from experimental work on both stud-less (41 mm) and stud-link (20.5 and 56 mm) chains. Torsional data are presented in both 'constant twist' and 'constant load' forms, as well as considering the lift between the links.

The hanging man: death, indeterminacy and the event

This article discusses approaches to the interpretation and analysis an event that is poised between reality and performance. It focuses upon a real event witnessed by the author while driving out of Los Angeles, USA. A body hanging on a rope from a bridge some 25/30 feet above the freeway held up the traffic. The status of the body was unclear. Was it the corpse of a dead human being or a stuffed dummy, a simulation of a death? Was it is tragic accident or suicide or was it a stunt, a protest or a performance? Whether a real body or not, it was an event: it drew an audience, it took place in a defined public space bound by time and it disrupted everyday normality and the familiar. The article debates how approaches to performance can engage with a shocking event, such as the Hanging Man, and the frameworks of interpretation that can be brought to bear on it. The analysis takes account of the function of memory in reconstructing the event, and the paradigms of cultural knowledge that offered themselves as parallels, comparators or distinctions against which the experience could be measured, such as the incidents of self-immolation related to demonstrations against the Vietnam War, the protest by the Irish Hunger Strikers and the visual impact of Anthony Gormley’s 2007 work, 'Event Horizon'. Theoretical frameworks deriving from analytical approaches to performance, media representation and ethical dilemmas are evaluated as means to assimilate an indeterminate and challenging event, and the notion of what an ‘event’ may be is itself addressed.

Multispacecraft observation of magnetic cloud erosion by magnetic reconnection during propagation

During propagation, Magnetic Clouds (MC) interact with their environment and, in particular, may reconnect with the solar wind around it, eroding away part of its initial magnetic flux. Here we quantitatively analyze such an interaction using combined, multipoint observations of the same MC flux rope by STEREO A, B, ACE, WIND and THEMIS on November 19–20, 2007. Observation of azimuthal magnetic flux imbalance inside a MC flux rope has been argued to stem from erosion due to magnetic reconnection at its front boundary. The present study adds to such analysis a large set of signatures expected from this erosion process. (1) Comparison of azimuthal flux imbalance for the same MC at widely separated points precludes the crossing of the MC leg as a source of bias in flux imbalance estimates. (2) The use of different methods, associated errors and parametric analyses show that only an unexpectedly large error in MC axis orientation could explain the azimuthal flux imbalance. (3) Reconnection signatures are observed at the MC front at all spacecraft, consistent with an ongoing erosion process. (4) Signatures in suprathermal electrons suggest that the trailing part of the MC has a different large-scale magnetic topology, as expected. The azimuthal magnetic flux erosion estimated at ACE and STEREO A corresponds respectively to 44% and 49% of the inferred initial azimuthal magnetic flux before MC erosion upon propagation. The corresponding average reconnection rate during transit is estimated to be in the range 0.12–0.22 mV/m, suggesting most of the erosion occurs in the inner parts of the heliosphere. Future studies ought to quantify the influence of such an erosion process on geo-effectiveness.

Sistema de produção sincronizado : uma aplicação em processos produtivos de propriedade contínuos segundo a teoria das restrições

Este trabalho de conclusão investiga o efeito da geração de estoques intermediários nos indicadores principais empregados na Teoria das Restrições (Ganho, Despesa Operacional e Inventário) em uma unidade industrial de processo produtivo de Propriedade contínuo, que emprega embalagens, matérias-primas obtidas em larga escala e cadeias logísticas de longo curso. Este tipo de indústria produz bens de consumo imediato, com pouca variabilidade, de modo “empurrado”. A principal conseqüência é a perda do sincronismo na cadeia logística, resultando em uma grande quantidade de estoques intermediários e custos crescentes, relacionados principalmente ao custo de manutenção destes estoques. Através dos cinco passos de focalização e das ferramentas lógicas da Teoria das Restrições, propõe-se uma alternativa gerencial, que inclui o algoritmo Tambor-Pulmão-Corda e insere a organização em um processo de melhoria contínua, cujos impactos são avaliados por simulação computacional. Através de técnicas estatísticas e software apropriados, constrói-se um modelo de simulação computacional baseado em dados reais de uma planta produtora de cimento. A partir deste modelo, diferentes cenários são testados, descobrindo-se a condição ótima. Chega-se a uma conclusão, considerando a mudança na política de geração de estoques intermediários e seus impactos na redução de custos e riscos.

Utilização da teoria das restrições no ambiente de manufatura em empresas no Brasil

A Teoria das Restrições surgiu no início da década de 80 revolucionando a teoria da manufatura e tendo um desenvolvimento rápido em diferentes países como Estados Unidos, Reino Unido, Holanda, Israel entre outros. No Brasil a difusão dessa metodologia, inicialmente concebida para o ambiente de manufatura, não está suficientemente desenvolvida. Pelos resultados que se acredita poderem decorrer de sua aplicação, é objetivo desta pesquisa detectar empresas que implementaram o sistema TPC em nosso país, verificar quais as vantagens que podem ser obtidas do seu uso e mostrá-las no relatório final, para difundir uma metodologia que acredita-se ser de fácil aplicação nas empresas brasileiras, possibilitando melhorar a competitividade de nossos produtos.

Realidade virtual na atividade cerebral: um estudo comparativo entre estados emocionais de adultos jovens e idosos

The association of Virtual Reality (VR) to clinical practice has become common in the recent years, showing to be an additional tool on health care, especially for elderly. Its use has been related to higher therapeutic adhesion levels and well being sensation. Such emotional based aspects are often observed by subjective tools of relative validity. This study analyzed the immediate effects of varied VR contexts balance training over emotional behavior, which was observed under peaks of maximum expression of EEG waves. Methodology: 40 individuals, divided in two groups, both gender, 20 young and 20 elderly, were submitted to a 60 minutes intervention, including balance training under VR. The first 25 minutes referred to initial evaluation, general orientation and cognitive assessment by the use of Mini Mental. The next ten minutes were designated to the avatar creation and tutorial video presentation. Through the following 20 minutes, the individuals from both groups were exposed to the exact same sequence of games under virtual contexts, while submitted to electroencephalography by Emotiv EPOC® focusing Adhesion, Frustration and Meditation states. The virtual interface was provided by the Nintendo® game, Wii Fit Plus, with the scenarios Balance Bubble (1), Penguin (2), Soccer (3), Tight Rope (4) and Table Tilt (5). Finally, a questionnaire of personal impressions was applied on the 5 minutes left. Results: data collected showed 64,7% of individuals from both groups presented higher concentration of adhesion peaks on Balance Bubble game. Both groups also presented similar behavior regarding meditation state, with marks close to 40%, each, on the same game, Table Tilt. There was divergence related to the frustration state, being the maximum concentration for the young group on the Soccer game (29,3%), whilst the elderly group referred highest marks to Tight Rope game (35,2%). Conclusion: Findings suggest virtual contexts can be favorable to adhesion and meditation emotional patterns induction, regardless age and for both sexes, whilst frustration seems to be more related to cognitive motor affordance, likely to be influenced by age. This information is relevant and contributes to the orientation for the best choice of games applied in clinical practice, as for other studies regarding this topic

Composition of the aquatic invertebrate fauna associated to the mangrove vegetation of a coastal river, analyzed through a manipulative experiment.

The present study analyzed the composition of the aquatic fauna associated to the mangrove forest in a southeastern Brazilian river. The composition of the macrofauna in the roots of the marginal vegetation located at three different salinity stretches was analyzed by sampling pieces of the submerged branches of the vegetation (natural substrate) and pieces of sisal rope (artificial substrate), installed close to the natural vegetation and sampled after a period of 14 colonization days. In both types of substrate, twelve taxonomic groups were sampled, representing three phyla (Cnidaria, Annelida and Arthropoda). The crustaceans, corresponding to the most diversified group, were represented by Copepoda, Tanaidacea, Isopoda, Amphipoda and Decapoda. The highest salinity stretch showed the highest abundance, with a progressive decrease from high to low salinity for both substrates. Copepoda and Tanaidacea predominated on both substrates, although the artificial substrate exhibited the highest total abundance and species richness. Considering the relative abundance of the taxonomic groups on both substrates, the majority of groups predominated in the highest salinity range. Significant differences on the longitudinal distribution of abundance were associated to the variation on salinity and with the complexity of the substrate.

Aplicador de herbicidas com pavios de corda: primeiros resultados de controle

Os aplicadores de herbicidas baseados em pavios de corda foram introducidos e largamente aceitos nos EUA a partir de 1978, devido a sua grande simplicidade, baixo custo operacional e economia do herbicida. Um protótipo fabricado com material inteiramente nacional, montado sobre duas rodas de bicicleta, tracionado pelo homem, tendo uma barra de 2 metros de comprimento, foi desenvolvido pelo departamento de defesa fitossanitária da Faculdade de Ciência Agrárias e Veterinárias de Jaboticabal - UNESP e submetido a um ensaio preliminar. A área estava uniformemente coberta com vegetação natural, com altura média de 55 cm e a maioria das plantas daninhas em estádio de maturação das sementes. O aplicador foi deslocado à velocidade de 2,7 km/h, com consumo médio de 9,3 litros de calda por hectare, tendo aplicado diluições de glyphosate em água, nas proporções de 1:2, 1:4 e 1:6 (produto comercial: água) e comparado à pulverização convencional tratorizada, efetuada com velocidade de 4,2 km/h e consumo de 4 litros de produto comercial com 310 litros de água por hectare. As avaliações do controle foram efetuadas através da determinação da biomassa epígea por ocasião de aplicação aos 15 e 33 dias após , além da atribuição de notas aos 33 dias da aplicação. Os resultados mostraram-se promissores para o protótipo, que pode desde já ser considerado um precioso instrumento para o manejo de plantas daninhas.

Proposta de avanço para o método Tambor-Pulmão-Corda Simplificado aplicado em ambientes de produção sob encomenda

Recentes aplicações da Teoria das Restrições em Gestão de Operações têm adotado o chamado método Tambor-Pulmão-Corda Simplificado (S-DBR - Simplified Drum-Buffer-Rope) como padrão para planejamento e controle da produção. Contudo, poucas são as referências bibliográficas, especialmente em periódicos nacionais e internacionais, que relatam seus principais conceitos e premissas. Este artigo se propõe a apresentar o método S-DBR para planejamento da produção e sua correspondente abordagem de controle da produção denominado Gerenciamento do Pulmão, aqui abordados em ambientes de produção sob encomenda (MTO - make to order), suas principais características, pressupostos e diferenças em relação ao método DBR clássico. É também apresentada uma proposta complementar ao método S-DBR para estabelecer promessas de entregas urgentes mantendo elevada probabilidade de entrega no prazo.

Efficacy and total release interval of mating disruption pheromone on the control of pink bollworm - Pectinophora Gossypiella - in cotton under field conditions in Brazil

This experiment was developed in order to evaluation the efficiency of pheromone to control the pink bollworm and the total time of its release in cotton field. The experiment was installed in field conditions, in Chapadao do Sul/SP/Brazil, from January to April, 1998. The treatments consisted of 2 areas, being one of 30ha, where it was applied the pheromone and another of 10ha that was chosen as control area and did not receive pheromone. In the treated area, the laboratory synthesized sex pheromone (PB-Rope) was used thought of dispensers that allowed the slow and gradual release of the active substance. A total of 250 dispenser per hectare were evenly hand distributed in the area. The dispensers were wrapped around the plants. Both areas (treated area and untreated area) were monitored by delta trap. For evaluation of the boll damage, the treatment area was divided into 4 sub-areas. Twenty five green bolls were collected at random from each sub-area at 48 and 65 days after pheromone treatment. Bolls were cracked open by hand, and number of the bolls with symptoms of pink bollworm attacks was recorded. For evaluation of the productivity four areas were demarcated in each treatment, where all fibers and seeds harvested were weighted. Release rate of pheromone from dispenser was evaluated through of the weigh of the dispensers. Were marked and weighed in analytic scale, 20 dispensers contend the pheromone, being placed 10 dispensers under the cotton plants in treated area and other 10 dispensers in an open area. To every 15 days the dispensers were retired and weighed in analytic scale and soon after put back in the field in the same places. The results showed that only one application of mating disrupt pheromone, used in a dosage of 250 dispenser/ha, reached 80% of control for pink bollworm. the release period of pheromone from dispenser, after the application, was 120 days.

Padrão de coordenação do pular corda: um estudo desenvolvimental

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A estabilidade do pular corda em diferentes padrões motores do saltar

Pós-graduação em Ciências da Motricidade - IBRC

Processo de adaptação do macaco- aranha-de-testa-branca (Ateles marginatus) ao cativeiro

Pós-graduação em Ciência Animal - FMVA