Full circle : the future of sustainable fashion manufacturing in New Zealand

Many fashion businesses in New Zealand have followed a global trend towards inexpensive off shore manufacturing. The transfer of the production of garments to overseas workers has had consequences for the wellbeing of local businesses, fashion designers and garment makers. The gradual decline of fashion manufacturing also appears to have resulted in a local fashion scene where many garments look the same in style, colour, fabric, cut and fit. The excitement of the past, where the majority of fashion designers established their own individuality through the cut and shape of the garments that they produced, may have been inadvertently lost in an effort to take advantage of cost savings achieved through mass production and manufacturing methods which are now largely unavailable in New Zealand. Consequently, a sustainable local fashion and manufacturing industry, with design integrity, seems further out of reach. This paper is focussed upon the thesis that the design and manufacture of a fashion garment, bearing in mind certain economic and practical restrictions at its inception, can contribute to a more sustainable fashion manufacturing industry in New Zealand.

The impact of gender diversity on performance in services and manufacturing organizations

We present three competing predictions of the organizational gender diversity-performance relationship: a positive linear prediction, a negative linear prediction, and an inverted U-shaped curvilinear prediction. The paper also proposes a moderating effect of industry type (services vs. manufacturing). The predictions were tested using archival quantitative data with a longitudinal design. The results show partial support for the positive linear and inverted U-shaped curvilinear predictions as well as for the proposed moderating effect of industry type. The results help reconcile the inconsistent findings of past research. The findings also show that industry context can strengthen or weaken gender diversity effects.

Service enhanced manufacturing in the building and construction product system

This report examines the involvement of manufacturers in value-adding through service-enhancement of product offerings. This focus has been prompted by:  emphasis in the knowledge-economy literature on the increasing role played by services in economic growth; and  recent analysis which suggests that the most dynamic sector of many economies is an integrated manufacturing-services sector (see Part One of this report). The report initially describes the emergence of an integrated manufacturing-services sector in the context of increasingly knowledge-based economic systems. Part Two reports on the results of a survey of manufacturers in the building and construction product system, investigating their involvement in service provision. Parts Three and Four present two case studies of exemplary manufacturers involved in adding value to their manufacturing operations through services offered on building and construction projects. The report examines manufacturers of materials, products, equipment and machinery used on building and construction projects. The two case study sections of the report, in part, focus on a major project undertaken by each of the manufacturers. This project element of activity is focussed on (as opposed to wholesale or retail supply), because this area of activity involves a broader array of service-enhancement mechanisms and more complex bundling of products and services.

The gender diversity-performance relationship in services and manufacturing organizations

Empirical findings on the link between gender diversity and performance have been inconsistent. This paper presents three competing predictions of the organizational gender diversity-performance relationship: a positive linear prediction derived from the resource-based view of the firm, a negative linear prediction derived from self-categorization and social identity theories, and an inverted U-shaped curvilinear prediction derived from the integration of the resource-based view of the firm with self-categorization and social identity theories. This paper also proposes a moderating effect of industry type (services vs. manufacturing) on the gender diversity-performance relationship. The predictions were tested in publicly listed Australian organizations using archival quantitative data with a longitudinal research design. The results show partial support for the positive linear and inverted U-shaped curvilinear predictions as well as for the proposed moderating effect of industry type. The curvilinear relationship indicates that different proportions of organizational gender diversity have different effects on organizational performance, which may be attributed to different dynamics as suggested by the resource-based view and self-categorization and social identity theories. The results help reconcile the inconsistent findings of past research that focused on the linear gender diversity-performance relationship. The findings also show that industry context can strengthen or weaken the effects of organizational gender diversity on performance.

Do programs to improve business performance in small and medium manufacturing enterprise improve opportunity recognition?

Increasing awareness of the benefits of stimulating entrepreneurial behaviour in small and medium enterprises has fostered strong interest in innovation programs. Recently many western countries have invested in design innovation for better firm performance. This research presents some early findings from a study of companies which participated in an holistic approach to design innovation, where the outcomes include better business performance and better market positioning in global markets. Preliminary findings from in-depth semi-structured interviews indicate the importance of firm openness to new ways of working and developing new processes of strategic entrepreneurship. Implications for theory and practice are discussed.

Design and development of automatic visual inspection system for PCB manufacturing

Inspection of solder joints has been a critical process in the electronic manufacturing industry to reduce manufacturing cost, improve yield, and ensure product quality and reliability. This paper proposes two inspection modules for an automatic solder joint classification system. The “front-end” inspection system includes illumination normalisation, localisation and segmentation. The “back-end” inspection involves the classification of solder joints using the Log Gabor filter and classifier fusion. Five different levels of solder quality with respect to the amount of solder paste have been defined. The Log Gabor filter has been demonstrated to achieve high recognition rates and is resistant to misalignment. This proposed system does not need any special illumination system, and the images are acquired by an ordinary digital camera. This system could contribute to the development of automated non-contact, non-destructive and low cost solder joint quality inspection systems.

A systematic approach to evaluate the process improvement in lean manufacturing organizations

Numerous tools and techniques have been developed to eliminate or reduce waste and carry out Lean concepts in the manufacturing environment. However, in practice, manufacturers encounter difficulties to clearly identify the weaknesses of the existing processes in order to address them by implementing Lean tools. Moreover, selection and implementation of appropriate Lean strategies to address the problems identified is a challenging task. According best of authors‟ knowledge, there is no method available to quantitatively evaluate the cost and benefits of implementing a Lean strategy to address the weaknesses in the manufacturing process. Therefore, benefits of Lean approaches cannot be clearly established. The authors developed a methodology to quantitatively measure the performances of a manufacturing system in detecting the causes of inefficiencies and to select appropriate Lean strategies to address the problems identified. The proposed methodology demonstrates that the Lean strategies should be implemented based on the contexts of the organization and identified problem in order to achieve maximum cost benefits. Finally, a case study has been presented to demonstrate how the procedure developed works in practical situation.

Manufacturing practices and performances: A Malaysian study

The purpose of this study is to identify the most common manufacturing practices adopted by the Malaysian manufacturers, company performance factors and relationship between practices and performances. To fulfil the study objectives, 400 manufacturers were surveyed by a standard 400 questionnaire. Three research methodologies such as descriptive analysis, ANOVA and regression analysis have been employed in this study. The analysis revealed that Malaysian manufacturers focus on optimizing three critical performance factors: product development, less customer return rate and on time delivery (OTD). The most important competitive factor was found to be company reputation and design and manufacturing capacity is the least important factor. The findings also proved that manufacturing practices significantly influence company performances

The adoption of advanced quality practices and its impact on manufacturers

Presently, the manufacturing sector faces unprecedented levels of competition in both the domestic and international markets. This competition is mainly as a result of rapidly expanding international trade, gradual removal of protection, substantial reforms in labour markets and industrial relations, rapid technological changes and discerning customers. Intense global competition requires manufacturers to deliver products with higher quality in a shorter time. Simultaneously, owing to new technological innovations, the complexity of the products is increasing. In Australia, the impact of this intense competition and structural changes appear to be having negative effects on the manufacturing sector. This paper discusses the quality and reliability (Q & R) practices and associated drawbacks of Australian manufacturers and presents the findings of an investigation of the challenges Australian manufacturers are currently facing. The results reported in the paper are based on the data collected from a survey using the standard questionnaire. The study was driven by a conceptual model, which relates advanced quality practices to manufacturing performance and manufacturing difficulties.Evidence indicates that Q & R is the main competitive factor for Australian manufacturers. Design capability and on time delivery (OTD) came second. Results show that Australian manufacturers in general are facing some manufacturing difficulties. The relationship between advanced quality practices and company performance and manufacturing difficulties are explored. It is found that the companies who have more emphasis on advanced quality practices have fewer problems in manufacturing practices. Moreover, companies who have actively implemented the advanced quality practices have managed to improve the quality of the product continuously. The results validate the proposed hypothesis and lend credence to current thinking that improvement in Q & R is a vital tool for competitive advantage.

SwarmPS: Rapid, semi-automated single particle selection software

Single particle analysis (SPA) coupled with high-resolution electron cryo-microscopy is emerging as a powerful technique for the structure determination of membrane protein complexes and soluble macromolecular assemblies. Current estimates suggest that ∼104–105 particle projections are required to attain a 3 Å resolution 3D reconstruction (symmetry dependent). Selecting this number of molecular projections differing in size, shape and symmetry is a rate-limiting step for the automation of 3D image reconstruction. Here, we present SwarmPS, a feature rich GUI based software package to manage large scale, semi-automated particle picking projects. The software provides cross-correlation and edge-detection algorithms. Algorithm-specific parameters are transparently and automatically determined through user interaction with the image, rather than by trial and error. Other features include multiple image handling (∼102), local and global particle selection options, interactive image freezing, automatic particle centering, and full manual override to correct false positives and negatives. SwarmPS is user friendly, flexible, extensible, fast, and capable of exporting boxed out projection images, or particle coordinates, compatible with downstream image processing suites.

Microwave curing of non-traditional polymer materials used in manufacture of injection moulds

Microwave heating technology is a cost-effective alternative way for heating and curing of used in polymer processing of various alternate materials. The work presented in this paper addresses the attempts made by the authors to study the glass transition temperature and curing of materials such as casting resins R2512, R2515 and laminating resin GPR 2516 in combination with two hardeners ADH 2403 and ADH 2409. The magnetron microwave generator used in this research is operating at a frequency of 2.45 GHz with a hollow rectangular waveguide. During this investigation it has been noted that microwave heated mould materials resulted with higher glass transition temperatures and better microstructure. It also noted that Microwave curing resulted in a shorter curing time to reach the maximum percentage cure. From this study it can be concluded that microwave technology can be efficiently and effectively used to cure new generation alternate polymer materials for manufacture of injection moulds in a rapid and efficient manner. Microwave curing resulted in a shorter curing time to reach the maximum percentage cure.

Manufacturing Yield Improvement by Clustering

Dealing with product yield and quality in manufacturing industries is getting more difficult due to the increasing volume and complexity of data and quicker time to market expectations. Data mining offers tools for quick discovery of relationships, patterns and knowledge in large databases. Growing self-organizing map (GSOM) is established as an efficient unsupervised datamining algorithm. In this study some modifications to the original GSOM are proposed for manufacturing yield improvement by clustering. These modifications include introduction of a clustering quality measure to evaluate the performance of the programme in separating good and faulty products and a filtering index to reduce noise from the dataset. Results show that the proposed method is able to effectively differentiate good and faulty products. It will help engineers construct the knowledge base to predict product quality automatically from collected data and provide insights for yield improvement.

Responding to rapid change in higher education : enabling university departments responsible for work related programs through boundary spanning

Boundary spanning links organisations to one another in order to create mutually beneficial relationships; it is a concept developed and used in organisational theory but rarely used to understand organisational structures in higher education (Pruitt & Schwartz, 1999). Yet understanding boundary spanning activity has the capacity to help universities respond to demands for continuous quality improvement, and to increase capacity to react to environmental uncertainty. At a time of rapid change characterised by a fluctuating economic environment, globalisation, increased mobility, and ecological issues, boundary spanning could be viewed as a key element in assisting institutions in effectively understanding and responding to such change. The literature suggests that effective boundary spanning could help universities improve organisational performance, use of infrastructure and resources, intergroup relations, leadership styles, performance and levels of job satisfaction, technology transfer, knowledge creation, and feedback processes, amongst other things. Our research aims to put a face on boundary spanning (Miller, 2008) by contextualising it within organisational systems and structures in university departments responsible for work related programs i.e. Work Integrated Learning (WIL) and Co-operative Education (Co-op). In this paper these approaches are referred to collectively as work related programs. The authors formed a research team in Victoria, British Columbia in 2009 at a sponsored international research forum, Two Days in June. The purpose of the invitation-only forum was to investigate commonalities and differences across programs and to formulate an international research agenda for work related programs over the next five to ten years. Researchers from Queensland University of Technology, University of Cincinnati, Baden-Wuerttemberg Cooperative State University, University of Ottawa,and Dublin City University agreed that further research was needed into the impact stakeholders, organisational systems, structures, policies, and practices have on departments delivering work related programs. This paper illustrates how policy and practice across the five institutions can be better understood through the lens of boundary spanning. It is argued that boundary spanning is an area of theory and practice with great applicability to a better understanding of the activity of these departments. The paper concludes by proposing topics for future research to examine how boundary spanning can be used to better understand practice and change in work related programs.