Espacialização do banco de sementes de plantas daninhas sob diferentes manejos de cana-de-açúcar em Rio Brilhante, Mato Grosso do Sul

The State of Mato Grosso do Sul is in full growth of this sector, thus the concern about harvesting systems are being studied, and these systems may influence the weed community interference of weeds in the cane sugar. The integrated management tool attached to geostatistics is to avoid productivity losses due to weed interference. The objective of this work was to study the spatial variability of the seed bank of weeds depending on the system for collecting cane sugar (raw and burning). The experiment was conducted in the area of commercial cultivation of the plant ETH Bioenergy S/A Eldorado Unity. Soil samples were taken with auger layer from 0.00 to 0.40 m depth in both cropping systems. The experimental plot was composed by a mesh consisting of 50 points georeferenced with irregular distances. Soil samples were taken to the greenhouse for germination. The number of weed species was analyzed using descriptive statistics and geostatistical techniques. The seeds of B. pilosa, dicots, bitter grass, nutsedge, dayflower monocots and spatial dependence of the seed bank in the collection system with burning of cane sugar. For the system of harvest only the raw sedge species present spatial dependence of distribution in the seed bank. In the harvest green cane enable the mapping of these species through the kriging maps produced, spot applications of herbicides in integrated management of Cyperus rotundus.

Uso de algoritmos genéticos na otimização do sistema de coleta do palhiço de cana-de-açúcar

The Brazilian government has convinced the world that ethanol deriving from sugar cane is a promissory means of sustainable fuel for vehicles. There is a great growth of ex vehicles , i.e, run both by ethanol and gasoline, due to competent automotive industries and e cient alcohol production technology. In 2009 and 2010 the ethanol production was 25.7 billion liters and 53.8% of sugar cane production was destined to alcohol production. Nevertheless, the sugar production also derived from sugar cane should increase in 2011. Brazil produced 33 million tons of sugar in the last harvest. With sugar cane on the rise production is arising new environmental problems. The harvest using mechanized cut besides improving the logistic transportation system leaves the generating residue in the eld. This residue is a mixture of straw, leavings and scrap of sugar cane named sugar cane crop residue and corresponds to 30% of biomass and can be burned and produce electricity by cogeneration. But the transport the sugar cane crop from the eld is expensive due costs involved in the transport system. This work aims to propose a formulation for the bales collecting problem from sugar cane eld to mill that minimize the costs involved in the transport system. The computational tests use the C++ language and an algorithm based on genetic algorithms techniques

Sistemas de cultivo em área de reforma de cana-de-açúcar e a sucessão de culturas na composição da comunidade infestante

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Fontes e doses de fósforo na presença e ausência de composto orgânico no estado nutricional e na produtividade da cana-de-açúcar

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Analise técnica, econômica e ecológica da incorporação de sistemas de gaseificação de bagaço de cana-de-açúcar no setor sucroalcooleiro: uso de ciclos combinados para o aumento da oferta de eletricidade

Pós-graduação em Engenharia Mecânica - FEG

Bactérias promotoras de crescimento e adubação nitrogenada no crescimento inicial de cana-de-açúcar proveniente de mudas pré-brotadas

The objective of this work was to evaluate the effects of the inoculation with plant growth-promoting bacteria on the formation of sugarcane pre-sprouted seedlings, originated from individual buds, and to quantify the initial growth of these seedlings in association with nitrogen application, in a low fertility soil. Two experiments were carried out: one in greenhouse conditions, with a time span of 50 days, and the other in vases under field conditions, with a time span of 180 days. In both experiments, a randomized complete block design was used with a factorial arrangement of 2x3, in the first experiment - with or without inoculation, and with three quantities of bud reserve -, and of 2x2x4, in the second one - with or without inoculation, with or without nitrogen, evaluated in four times: at 45, 90, 135, and 180 days. The inoculant had effect on the initial growth of the pre-sprouted seedlings, increasing sprouting speed and dry matter accumulation on roots and shoots, regardless of the bud reserve amount. In the second experiment, the inoculant increased the initial growth of shoots and root system up to 180 days after transplantation, increasing height, tillering, stalk diameter, dry matter production of stalks and straw, and root length, regardless of nitrogen application. The inoculant has a positive physiological effect on plant growth.

Aplicação de um método híbrido de pontos interiores e branch-and-bound em problemas de minimização de custo de colheita da cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Interferência das plantas daninhas na produtividade e na qualidade tecnológica da cana-de-açúcar no manejo cana-crua e queimada

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Qualidade da operação na cultura da cana-de-açúcar utilizando cartas de controle

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Utilização de um algoritmo de caminho mínimo no processo de recolhimento do palhiço da cana-de-açúcar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de sistemas de manejo de palhiço de cana-de-açúcar no campo e na indústria

This work presents and it evaluates the systems of crop of sugar-cane trash for energy ends, through studies accomplished in three industries of sugar and alcohol, of the State of São Paulo, as withdrawal in the field and crop partially integral with separation of the trash in the industry (cleaning the dry). it is Treated of a development of opportunities, because only when there is pulp shortage it is that remembers the energy use of the trash, which presents a larger cost for equivalent ton in energy again that the pulp of the sugar-cane, that already has a very spread trade in the section the sugar and alcohol. Another factor that should be outstanding is the environmental, because the Environmental Protocol exists, sanctioned by most of the producing of sugar-cane, that reduces the period for elimination burned of the sugar-cane before the crop implanted by the Law 11.241 of 2002. However it is important to highlight that the crop of the sugar-cane without it burns her previous, it increases the difficulty in the combat the pest denominated “cigarrinha-da-raiz”, turning necessary the retreat of part of the trash non beneficial for the soil, contributing like this, with the practice of removal of the trash for energy use. Of the obtained results it is ended that the most interesting modality economically, was the separation of the trash in the industry and that for better efficiency, the sugar-cane should go by a double process of blowing for cleaning, pointing out, however, that there was reduction of the capacity of transport of the sugar-cane as adult was the amount of trash partially in the crop integral.

Métodos de extração da lignina do bagaço da cana-de-açúcar do Noroeste do Estado de São Paulo

Pós-graduação em Química - IBILCE

Métodos de extração da lignina do bagaço da cana-de-açúcar do Noroeste do Estado de São Paulo

Pós-graduação em Química - IBILCE

Síntese de nanotubos de carbono a partir do bagaço da cana-de-açúcar

A tradicional produção de açúcar, associada à crescente produção de etanol, faz da indústria sucroalcooleira um dos principais segmentos da economia brasileira. As indústrias brasileiras de açúcar e álcool processaram cerca de 630 milhões de toneladas de cana em 2009, gerando, aproximadamente, 142 milhões de toneladas de bagaço. Este trabalho apresenta uma possibilidade de destinação para o bagaço da cana através da queima controlada associada à síntese de nanotubos de carbono (CNTs), materiais que possuem inúmeras possibilidades de aplicações tecnológicas devido as suas excepcionais propriedades. Foi utilizado o processo de pirólise a 1000ºC associado a um sistema catalisador, visando à recuperação dos gases gerados como matéria-prima para a síntese dos CNTs. As emissões gasosas foram analisadas por cromatografia e os materiais produzidos foram caracterizados com o emprego de MEV, MET, TGA e espectroscopia Raman. Os resultados mostraram que o uso do catalisador resultou na diminuição das emissões gasosas. Nanotubos de carbono com comprimentos de 10 a 40 µm e diâmetros entre 20 e 50 nm foram produzidos.

Uso da cinza do bagaço da cana-de-açúcar como matéria-prima na substituição dos fundentes para aplicações em porcelanato

The present study aims to evaluate the potential use of bagasse ash from sugar cane (CBC) as a flux, replacing phyllite and/or feldspar in standard industrial mass production of enameled porcelain, verifying the possibility of the CBC contribute to the overall reduction of the coefficient of thermal expansion of the ceramic mass. To this end, as a result of the research, we characterized the raw material components of the standard mass (clay, phyllite, kaolin, feldspar, quartz and talc) and the residue of BCC, by testing by XRF, XRD, AG, DTA and ATG. Specimens (CDP) were manufactured in the dimensions of 100 mm x 50 mm x 8 mm in uniaxial matrix under compaction pressure of 33 MPa, assembled in batches of 3 units subsequently sintered at temperatures of 1150°C to 1210°C by varying the Rating Scale at 10°C, heating and cooling ramp of 50°C/min and 25°C/min, with levels of 1 min, 3 min, 5 min, 8 min, 10 min, 15 min, 30 min and 60 min. analyzing the results of the physical properties of water absorption (WA), linear firing shrinkage (LFS), dilatometric analysis (DTA), flexural strain (SFT) and SEM of the sintered bodies in order to verify the adequacy of CDP to ISO 13006, ISO 10545, NBR 13816 standards; NBR 13817 and NBR 13818. The study showed that the formulations that best suit the requirements of the standards are:. G4 - which was applied in 10% of replacing the CBC phyllite, sintering temperature 1210 ° C for 10 min and porch, and F3 - with application of 7.5% of CBC to replace the feldspar in the sintering temperatures of 1190°C, 1200°C and 1210°C for 10 min and porch. These formulations showed better performance regarding the formation of primary and secondary mullite, with considerable reduction of cracks and pores, meeting the prerequisites of standards for glazed porcelain. The results shows that the use of the CBC as a flux in the preparation of porcelain mass meets standard parameters for the manufacture of the product, and thereby can reduce environmental impact and the cost of production. Therefore, it is recommended to use this residue in the ceramics industry, due to its industrial, commercial and collaborative viability for sustainability.