The link between public support and private R&D effort: What is the optimal subsidy?

The effectiveness of R&D subsidies can vary substantially depending on their characteristics. Specifically, the amount and intensity of such subsidies are crucial issues in the design of public schemes supporting private R&D. Public agencies determine the intensities of R&D subsidies for firms in line with their eligibility criteria, although assessing the effects of R&D projects accurately is far from straightforward. The main aim of this paper is to examine whether there is an optimal intensity for R&D subsidies through an analysis of their impact on private R&D effort. We examine the decisions of a public agency to grant subsidies taking into account not only the characteristics of the firms but also, as few previous studies have done to date, those of the R&D projects. In determining the optimal subsidy we use both parametric and nonparametric techniques. The results show a non-linear relationship between the percentage of subsidy received and the firms’ R&D effort. These results have implications for technology policy, particularly for the design of R&D subsidies that ensure enhanced effectiveness.

A comparative study of congenital toxoplasmosis between public and private hospitals from Uberlândia, MG, Brazil

The main purpose of the present study was to examine if there is difference in terms of incidence rates of congenital toxoplasmosis among populations assisted in public and private hospitals from Uberlândia, state of Minas Gerais, Brazil. A total of 805 serum samples from cord blood were collected, being 500 from public hospital and 305 from private hospital, and all patients answered a questionnaire about pregnancy and newborns. An indirect enzyme linked immunosorbent assay (ELISA) was performed to detect IgG antibodies to Toxoplasma gondii and the positive samples were retested to verify the presence of specific IgM and IgA antibodies in a capture ELISA. We found significant differences among data from both hospitals with respect to maternal age, origin city, gestational age, number of visits to physicians during pregnancy, type of delivery, and birth weight. Seroprevalence of IgG antibodies against T. gondii for patients from public and private hospitals was 57.6% and 41.9% respectively, and this difference was statistically significant (P < 0.0001). In addition, the frequency of congenital toxoplasmosis measured by the presence of IgM and/or IgA antibodies toward T. gondii was exclusively located in samples from public hospital (0.8%), and no positive sample was seen in private hospital (0%). Considering that almost all babies suffering from congenital toxoplasmosis, if undiagnosed and untreated, will develop visual or neurological impairments by adulthood, the results presented herein emphasized the importance to accomplish screening programs for toxoplasmosis during pregnancy, particularly in the public hospitals, due to the expressive rate of congenital disease showed in the patients attended at these centers.

Evidence evaluation in fingerprint comparison and automated fingerprint identification systems: modeling between finger variability

In the context of the investigation of the use of automated fingerprint identification systems (AFIS) for the evaluation of fingerprint evidence, the current study presents investigations into the variability of scores from an AFIS system when fingermarks from a known donor are compared to fingerprints that are not from the same source. The ultimate goal is to propose a model, based on likelihood ratios, which allows the evaluation of mark-to-print comparisons. In particular, this model, through its use of AFIS technology, benefits from the possibility of using a large amount of data, as well as from an already built-in proximity measure, the AFIS score. More precisely, the numerator of the LR is obtained from scores issued from comparisons between impressions from the same source and showing the same minutia configuration. The denominator of the LR is obtained by extracting scores from comparisons of the questioned mark with a database of non-matching sources. This paper focuses solely on the assignment of the denominator of the LR. We refer to it by the generic term of between-finger variability. The issues addressed in this paper in relation to between-finger variability are the required sample size, the influence of the finger number and general pattern, as well as that of the number of minutiae included and their configuration on a given finger. Results show that reliable estimation of between-finger variability is feasible with 10,000 scores. These scores should come from the appropriate finger number/general pattern combination as defined by the mark. Furthermore, strategies of obtaining between-finger variability when these elements cannot be conclusively seen on the mark (and its position with respect to other marks for finger number) have been presented. These results immediately allow case-by-case estimation of the between-finger variability in an operational setting.

Public and private saving and investment

We decompose aggregate saving and investment into its publicand private components and then document a variety of ``stylized facts''associated with saving and investment rates for a sample of15 countries over the period 1975--1989. In order to seewhether these empirical relationships are consistent with aworld of perfect capital mobility we develop a multi--countrymodel with free trade in a riskfree bond and calibrate it tothe fifteen OECD countries. We pay special attential tomodeling the fiscal policy rules. The model performsremarkably well in accounting for a wide variety of timeseries relationships. Nonetheless the model is not able to capture the crosssectional aspect of the data. In particular, the model cannot accountfor both the large cross country correlation between aggregate saving and investmentrates and the very negative cross country relationship between the public andprivate saving minus investment gaps.

Work motivation and pro-social behavior in the delivery of public services : theoretical and empirical insights

This Ph.D. dissertation seeks to study the work motivation of employees in the delivery of public services. The questioning on work motivation in public services in not new but it becomes central for governments which are now facing unprecedented public debts. The objective of this research is twofold : First, we want to see if the work motivation of employees in public services is a continuum (intrinsic and extrinsic motivations cannot coexist) or a bi-dimensional construct (intrinsic and extrinsic motivations coexist simultaneously). The research in public administration literature has focused on the concept of public service motivation, and considered motivation to be uni-dimensional (Perry and Hondeghem 2008). However, no study has yet tackled both types of motivation, the intrinsic and extrinsic ones, in the same time. This dissertation proposes, in Part I, a theoretical assessment and an empirical test of a global work motivational structure, by using a self-constructed Swiss dataset with employees from three public services, the education sector, the security sector and the public administrative services sector. Our findings suggest that work motivation in public services in not uni-dimensional but bi-dimensional, the intrinsic and extrinsic motivations coexist simultaneously and can be positively correlated (Amabile et al. 1994). Our findings show that intrinsic motivation is as important as extrinsic motivation, thus, the assumption that employees in public services are less attracted by extrinsic rewards is not confirmed for this sample. Other important finding concerns the public service motivation concept, which, as theoretically predicted, represents the major motivational dimension of employees in the delivery of public services. Second, the theory of public service motivation makes the assumption that employees in public services engage in activities that go beyond their self-interest, but never uses this construct as a determinant for their pro-social behavior. In the same time, several studies (Gregg et al. 2011 and Georgellis et al. 2011) bring evidence about the pro-social behavior of employees in public services. However, they do not identify which type of motivation is at the origin of this behavior, they only make the assumption of an intrinsically motivated behavior. We analyze the pro-social behavior of employees in public services and use the public service motivation as determinant of their pro-social behavior. We add other determinants highlighted by the theory of pro-social behavior (Bénabou and Tirole 2006), by Le Grand (2003) and by fit theories (Besley and Ghatak 2005). We test these determinants on Part II and identify for each sector of activity the positive or the negative impact on pro-social behavior of Swiss employees. Contrary to expectations, we find, for this sample, that both intrinsic and extrinsic factors have a positive impact on pro-social behavior, no crowding-out effect is identified in this sample. We confirm the hypothesis of Le Grand (2003) about the positive impact of the opportunity cost on pro-social behavior. Our results suggest a mix of action-oriented altruism and out-put oriented altruism of employees in public services. These results are relevant when designing incentives schemes for employees in the delivery of public services.

Resigned but satisfied: The negative impact of public service motivation and red tape on work satisfaction

This article examines the relationship between red tape, Public Service Motivation (PSM) and a particular work outcome labelled 'resigned satisfaction'. Using data from a national survey of over 3754 public servants working at the municipal level in Switzerland, this study shows the importance of looking more closely at the concept of work satisfaction and, furthermore, of thoroughly investigating the impact of the different PSM dimensions on work outcomes. Unsurprisingly, research findings show that red tape is the most important predictor of resignation. Nevertheless, when PSM dimensions are analysed separately, results demonstrate that 'commitment to public interest/civic duty' and, to a lesser extent, 'attraction to policy-making' decrease resignation, whereas 'compassion' and 'self-sacrifice' increase it. This study thus highlights some of the negative (or undesirable) effects of PSM that have not been previously addressed in PSM literature.

Statewide Economic Impacts of Disaster-Related Payments to Support Household and Private and Public Sector Recovery in Iowa, January 2010

There have been a multitude of programs providing assistance to the state of Iowa in the past 18 months. Springtime 2008 disasters resulted in tornado damage and widespread flood damage to large fractions of the state. In consequence, there was a very large flow of federal and state resources dedicated to assisting community and statewide recovery efforts. The nation was in recession as well and continued to be in recession through much of 2009. A sizeable amount of assistance found its way to Iowa under the American Recovery and Reinvestment Act of 2009 in the forms of infrastructure stimulus spending, income supports and other safety net spending for households, and stabilization assistance for essential public services like education. On top of that, the state of Iowa authorized the I Jobs program as an additional infrastructure development program, and as a jobs stimulus program. The total amount of spending for all types of programs, disaster or economic recovery related, is perhaps as high as $7.5 billion over the next few years.

Modeling and control of electromechanical systems

The material presented in the these notes covers the sessions Modelling of electromechanical systems, Passive control theory I and Passive control theory II of the II EURON/GEOPLEX Summer School on Modelling and Control of Complex Dynamical Systems.We start with a general description of what an electromechanical system is from a network modelling point of view. Next, a general formulation in terms of PHDS is introduced, and some of the previous electromechanical systems are rewritten in this formalism. Power converters, which are variable structure systems (VSS), can also be given a PHDS form.We conclude the modelling part of these lectures with a rather complex example, showing the interconnection of subsystems from several domains, namely an arrangement to temporally store the surplus energy in a section of a metropolitan transportation system based on dc motor vehicles, using either arrays of supercapacitors or an electric poweredflywheel. The second part of the lectures addresses control of PHD systems. We first present the idea of control as power connection of a plant and a controller. Next we discuss how to circumvent this obstacle and present the basic ideas of Interconnection and Damping Assignment (IDA) passivity-based control of PHD systems.

On Modelling, System Identification and Control of Servo-Systems with a Flexible Load

The present study was done with two different servo-systems. In the first system, a servo-hydraulic system was identified and then controlled by a fuzzy gainscheduling controller. The second servo-system, an electro-magnetic linear motor in suppressing the mechanical vibration and position tracking of a reference model are studied by using a neural network and an adaptive backstepping controller respectively. Followings are some descriptions of research methods. Electro Hydraulic Servo Systems (EHSS) are commonly used in industry. These kinds of systems are nonlinearin nature and their dynamic equations have several unknown parameters.System identification is a prerequisite to analysis of a dynamic system. One of the most promising novel evolutionary algorithms is the Differential Evolution (DE) for solving global optimization problems. In the study, the DE algorithm is proposed for handling nonlinear constraint functionswith boundary limits of variables to find the best parameters of a servo-hydraulic system with flexible load. The DE guarantees fast speed convergence and accurate solutions regardless the initial conditions of parameters. The control of hydraulic servo-systems has been the focus ofintense research over the past decades. These kinds of systems are nonlinear in nature and generally difficult to control. Since changing system parameters using the same gains will cause overshoot or even loss of system stability. The highly non-linear behaviour of these devices makes them ideal subjects for applying different types of sophisticated controllers. The study is concerned with a second order model reference to positioning control of a flexible load servo-hydraulic system using fuzzy gainscheduling. In the present research, to compensate the lack of dampingin a hydraulic system, an acceleration feedback was used. To compare the results, a pcontroller with feed-forward acceleration and different gains in extension and retraction is used. The design procedure for the controller and experimental results are discussed. The results suggest that using the fuzzy gain-scheduling controller decrease the error of position reference tracking. The second part of research was done on a PermanentMagnet Linear Synchronous Motor (PMLSM). In this study, a recurrent neural network compensator for suppressing mechanical vibration in PMLSM with a flexible load is studied. The linear motor is controlled by a conventional PI velocity controller, and the vibration of the flexible mechanism is suppressed by using a hybrid recurrent neural network. The differential evolution strategy and Kalman filter method are used to avoid the local minimum problem, and estimate the states of system respectively. The proposed control method is firstly designed by using non-linear simulation model built in Matlab Simulink and then implemented in practical test rig. The proposed method works satisfactorily and suppresses the vibration successfully. In the last part of research, a nonlinear load control method is developed and implemented for a PMLSM with a flexible load. The purpose of the controller is to track a flexible load to the desired position reference as fast as possible and without awkward oscillation. The control method is based on an adaptive backstepping algorithm whose stability is ensured by the Lyapunov stability theorem. The states of the system needed in the controller are estimated by using the Kalman filter. The proposed controller is implemented and tested in a linear motor test drive and responses are presented.

Mass transfer and particleinteractions in granular systems and suspension flows

The purpose of this study was to investigate some important features of granular flows and suspension flows by computational simulation methods. Granular materials have been considered as an independent state ofmatter because of their complex behaviors. They sometimes behave like a solid, sometimes like a fluid, and sometimes can contain both phases in equilibrium. The computer simulation of dense shear granular flows of monodisperse, spherical particles shows that the collisional model of contacts yields the coexistence of solid and fluid phases while the frictional model represents a uniform flow of fluid phase. However, a comparison between the stress signals from the simulations and experiments revealed that the collisional model would result a proper match with the experimental evidences. Although the effect of gravity is found to beimportant in sedimentation of solid part, the stick-slip behavior associated with the collisional model looks more similar to that of experiments. The mathematical formulations based on the kinetic theory have been derived for the moderatesolid volume fractions with the assumption of the homogeneity of flow. In orderto make some simulations which can provide such an ideal flow, the simulation of unbounded granular shear flows was performed. Therefore, the homogeneous flow properties could be achieved in the moderate solid volume fractions. A new algorithm, namely the nonequilibrium approach was introduced to show the features of self-diffusion in the granular flows. Using this algorithm a one way flow can beextracted from the entire flow, which not only provides a straightforward calculation of self-diffusion coefficient but also can qualitatively determine the deviation of self-diffusion from the linear law at some regions nearby the wall inbounded flows. Anyhow, the average lateral self-diffusion coefficient, which was calculated by the aforementioned method, showed a desirable agreement with thepredictions of kinetic theory formulation. In the continuation of computer simulation of shear granular flows, some numerical and theoretical investigations were carried out on mass transfer and particle interactions in particulate flows. In this context, the boundary element method and its combination with the spectral method using the special capabilities of wavelets have been introduced as theefficient numerical methods to solve the governing equations of mass transfer in particulate flows. A theoretical formulation of fluid dispersivity in suspension flows revealed that the fluid dispersivity depends upon the fluid properties and particle parameters as well as the fluid-particle and particle-particle interactions.

Public and Private Production in a Mixed Delivery System: Regulation, Competition and Costs

Academics and policy makers are increasingly shifting the debate concerning the best form of public service provision beyond the traditional dilemma between pure public and pure private delivery modes, because, among other reasons, there is a growing body of evidence that casts doubt on the existence of systematic cost savings from privatization, while any competition seems to be eroded over time. In this paper we compare the relative merits of public and private delivery within a mixed delivery system. We study the role played by ownership, transaction costs, and competition on local public service delivery within the same jurisdiction. Using a stochastic cost frontier, we analyze the public-private urban bus system in the Barcelona Metropolitan Area. Our results suggest that private firms tendering the service have higher delivery costs than those incurred by the public firm, especially when transaction costs are taken into account. Tenders, therefore, do not help to reduce delivery costs. Our results suggest that under a mixed delivery scheme, which permits the co-existence of public and private production, the metropolitan government and the regulator can use private delivery to contain costs in the public firm and, at the same time, benefit from the greater flexibility of private firms for dealing with events not provided for under contract.

Impact of maternity care policy in Catalonia: a retrospective cross-sectional study of service delivery in public and private hospitals

Background: As a result of the growing number of interventions that are now performed in the context of maternity care, health authorities have begun to examine the possible repercussions for service provision and for maternal and neonatal health. In Spain the Strategy Paper on Normal Childbirth was published in 2008, and since then the authorities in Catalonia have sought to implement its recommendations. This paper reviews the current provision of maternity care in Catalonia. Methods: This was a descriptive study. Hospitals were grouped according to their source of funding (public or private) and were stratified (across four strata) on the basis of the annual number of births recorded within their respective maternity service. Data regarding the distribution of obstetric professionals were taken from an official government survey of hospitals published in 2010. The data on obstetric interventions (caesarean, use of forceps, vacuum or non-specified instruments) performed in 2007, 2010 and 2012 were obtained by consulting discharge records of 44 public and 20 private hospitals, which together provide care in 98% of all births in Catalonia. Proportions and confidence intervals were calculated for each intervention performed in all full-term (3742 weeks) singleton births. Results: Analysis of staff profiles according to the stratification of hospitals showed that almost all the hospitals had more obstetricians than midwives among their maternity care staff. Public hospitals performed fewer caesareans [range between 19.20% (CI 18.84-19.55) and 28.14% (CI 27.73-28.54)] than did private hospitals [range between 32.21% (CI 31.78-32.63) and 39.43% (CI 38.98-39.87)]. The use of forceps has decreased in public hospitals. The use of a vacuum extractor has increased and is more common in private hospitals. Conclusions: Caesarean section is the most common obstetric intervention performed during full-term singleton births in Catalonia. The observed trend is stable in the group of public hospitals, but shows signs of a rise among private institutions. The number of caesareans performed in accredited public hospitals covers a limited range with a stable trend. Among public hospitals the highest rate of caesareans is found in non-accredited hospitals with a lower annual number of births.

Impact of maternity care policy in Catalonia: a retrospective cross-sectional study of service delivery in public and private hospitals

Background: As a result of the growing number of interventions that are now performed in the context of maternity care, health authorities have begun to examine the possible repercussions for service provision and for maternal and neonatal health. In Spain the Strategy Paper on Normal Childbirth was published in 2008, and since then the authorities in Catalonia have sought to implement its recommendations. This paper reviews the current provision of maternity care in Catalonia. Methods: This was a descriptive study. Hospitals were grouped according to their source of funding (public or private) and were stratified (across four strata) on the basis of the annual number of births recorded within their respective maternity service. Data regarding the distribution of obstetric professionals were taken from an official government survey of hospitals published in 2010. The data on obstetric interventions (caesarean, use of forceps, vacuum or non-specified instruments) performed in 2007, 2010 and 2012 were obtained by consulting discharge records of 44 public and 20 private hospitals, which together provide care in 98% of all births in Catalonia. Proportions and confidence intervals were calculated for each intervention performed in all full-term (3742 weeks) singleton births. Results: Analysis of staff profiles according to the stratification of hospitals showed that almost all the hospitals had more obstetricians than midwives among their maternity care staff. Public hospitals performed fewer caesareans [range between 19.20% (CI 18.84-19.55) and 28.14% (CI 27.73-28.54)] than did private hospitals [range between 32.21% (CI 31.78-32.63) and 39.43% (CI 38.98-39.87)]. The use of forceps has decreased in public hospitals. The use of a vacuum extractor has increased and is more common in private hospitals. Conclusions: Caesarean section is the most common obstetric intervention performed during full-term singleton births in Catalonia. The observed trend is stable in the group of public hospitals, but shows signs of a rise among private institutions. The number of caesareans performed in accredited public hospitals covers a limited range with a stable trend. Among public hospitals the highest rate of caesareans is found in non-accredited hospitals with a lower annual number of births.

Rigid Rod Polymer Fillers in Acrylic Denture and Dental Adhesive Resin Systems

Polymeric materials have been used in dental applications for decades. Adhesion of polymeric materials to each other and to the tooth substrate is essential to their successful use. The aim of this series of studies was two-folded. First, to improve adhesion of poly(paraphenylene) based rigid rod polymer (RRP) to other dental polymers, and secondly, to evaluate the usability of a new dentin primer system based on RRP fillers. Poly(paraphenylene) based RRP would be a tempting material for dental applications because of its good mechanical properties. To be used in dental applications, reliable adhesion between RRP and other dental polymers is required. In this series of studies, the adhesion of RRP to denture base polymer and the mechanical properties of RRP-denture base polymer-material combination were evaluated. Also adhesion of BisGMA-TEGDMA-resin to RRP was determined. Different surface treatments were tested to improve the adhesion of BisGMA-TEGDMA-resin to RRP. Results were based on three-point bending testing, Vickers surface hardness test and scanning electron microscope analysis (SEM), which showed that no reliable adhesion between RRP and denture base polymer was formed. Addition of RRP filler to denture base polymer increased surface hardness and flexural modulus but flexural strength decreased. Results from the shear bond strength test and SEM revealed that adhesion between resin and RRP was possible to improve by surface treatment with dichloromethane (DCM) based primer and a new kind of adhesive surface can be designed. The current dentin bonding agents have good immediate bond strength, but in long term the bond strength may decrease due to the detrimental effect of water and perhaps by matrix metalloproteinases. This leads to problems in longevity of restorations. Current bonding agents use organic monomers. In this series of studies, RRP filled dentin primer was tested in order to decrease the water sorption of the monomer system of the primers. The properties of new dentin primer system were evaluated in vitro by comparing it to commercial etch and rinse adhesive system. The results from the contact angle measurements and SEM showed that experimental primer with RRP reinforcement provided similar resin infiltration to dentin collagen and formed the resin-dentin interface as the control primer. Microtensile bond strength test and SEM revealed that in short term water storing, RRP increased bond strength and primer with BMEP-monomer (bis[2-(methacryloyloxy)-ethyl]phosphate) and high solvent concentration provided comparable bonding properties to the commercial control primers. In long term water storing, the high solvent-monomer concentration of the experimental primers decreased bond strength. However, in low solvent-monomer concentration groups, the long-term water storing did not decrease the bond strength despite the existence of hydrophilic monomers which were used in the system. These studies demonstrated that new dentin primer system reached the mechanical properties of current traditional etch and rinse adhesive system in short time water storing. Improved properties can be achieved by further modifications of the monomer system. Studies of the adhesion of RRP to other polymers suggest that adhesion between RRP and other dental polymers is possible to obtain by certain surface treatments.