Optimal control and operation of drum granulation processes

Process optimisation and optimal control of batch and continuous drum granulation processes are studied in this paper. The main focus of the current research has been: (i) construction of optimisation and control relevant, population balance models through the incorporation of moisture content, drum rotation rate and bed depth into the coalescence kernels; (ii) investigation of optimal operational conditions using constrained optimisation techniques; (iii) development of optimal control algorithms based on discretized population balance equations; and (iv) comprehensive simulation studies on optimal control of both batch and continuous granulation processes. The objective of steady state optimisation is to minimise the recycle rate with minimum cost for continuous processes. It has been identified that the drum rotation-rate, bed depth (material charge), and moisture content of solids are practical decision (design) parameters for system optimisation. The objective for the optimal control of batch granulation processes is to maximize the mass of product-sized particles with minimum time and binder consumption. The objective for the optimal control of the continuous process is to drive the process from one steady state to another in a minimum time with minimum binder consumption, which is also known as the state-driving problem. It has been known for some time that the binder spray-rate is the most effective control (manipulative) variable. Although other possible manipulative variables, such as feed flow-rate and additional powder flow-rate have been investigated in the complete research project, only the single input problem with the binder spray rate as the manipulative variable is addressed in the paper to demonstrate the methodology. It can be shown from simulation results that the proposed models are suitable for control and optimisation studies, and the optimisation algorithms connected with either steady state or dynamic models are successful for the determination of optimal operational conditions and dynamic trajectories with good convergence properties. (c) 2005 Elsevier Ltd. All rights reserved.

Advances in distributed parameter approach to the dynamics and control of activated sludge processes for wastewater treatment

This paper presents a review of modelling and control of biological nutrient removal (BNR)-activated sludge processes for wastewater treatment using distributed parameter models described by partial differential equations (PDE). Numerical methods for solution to the BNR-activated sludge process dynamics are reviewed and these include method of lines, global orthogonal collocation and orthogonal collocation on finite elements. Fundamental techniques and conceptual advances of the distributed parameter approach to the dynamics and control of activated sludge processes are briefly described. A critical analysis on the advantages of the distributed parameter approach over the conventional modelling strategy in this paper shows that the activated sludge process is more adequately described by the former and the method is recommended for application to the wastewater industry (c) 2006 Elsevier Ltd. All rights reserved.

World Association for the Advancement of Veterinary Parasitology (WAAVP) guidelines for evaluating the efficacy of acaricides against ticks (Ixodidae) on ruminants

These guidelines have been prepared to assist in the planning, conduct and interpretation of studies for the assessment of the efficacy of acaricides (excluding vaccines and other bio-control agents) against single and multi-host ticks (Ixodidae) on ruminants. Information is provided on the selection of animals, dose determination, dose confirmation and field studies, record keeping and result interpretation. The use of pen facilities is advocated for dose determination and confirmation studies for defining therapeutic and persistent efficacy. A minimum of two studies per tick species for which claims are sought is recommended for each dose determination and dose confirmation investigation. If dose confirmation studies demonstrate greater than 95% efficacy the sponsor may proceed to field studies, where a minimum of two studies per geographical location is preferred to confirm the therapeutic and persistent efficacy under field conditions. If dose confirmation studies demonstrate less than 95% efficacy then longer-term field studies can be conducted over two tick seasons with a minimum of two studies per geographical location. These studies can incorporate other control methods such as tick vaccines, to demonstrate stable long-term tick management. Specific advice is also given on conducting studies with paralysis ticks. These guidelines are also intended to assist investigators on how to conduct specific experiments, to provide specific information for registration authorities involved in the decision-making process, to assist in the approval and registration of new acaricides, and to facilitate the worldwide adoption of standard procedures. (c) 2005 Elsevier B.V. All rights reserved.

Quality of service in flexible workflows through process constraints

Workflow technology has delivered effectively for a large class of business processes, providing the requisite control and monitoring functions. At the same time, this technology has been the target of much criticism due to its limited ability to cope with dynamically changing business conditions which require business processes to be adapted frequently, and/or its limited ability to model business processes which cannot be entirely predefined. Requirements indicate the need for generic solutions where a balance between process control and flexibility may be achieved. In this paper we present a framework that allows the workflow to execute on the basis of a partially specified model where the full specification of the model is made at runtime, and may be unique to each instance. This framework is based on the notion of process constraints. Where as process constraints may be specified for any aspect of the workflow, such as structural, temporal, etc. our focus in this paper is on a constraint which allows dynamic selection of activities for inclusion in a given instance. We call these cardinality constraints, and this paper will discuss their specification and validation requirements.

The human factors of automatic speech recognition in control room systems

This thesis addresses the viability of automatic speech recognition for control room systems; with careful system design, automatic speech recognition (ASR) devices can be useful means for human computer interaction in specific types of task. These tasks can be defined as complex verbal activities, such as command and control, and can be paired with spatial tasks, such as monitoring, without detriment. It is suggested that ASR use be confined to routine plant operation, as opposed the critical incidents, due to possible problems of stress on the operators' speech.  It is proposed that using ASR will require operators to adapt a commonly used skill to cater for a novel use of speech. Before using the ASR device, new operators will require some form of training. It is shown that a demonstration by an experienced user of the device can lead to superior performance than instructions. Thus, a relatively cheap and very efficient form of operator training can be supplied by demonstration by experienced ASR operators. From a series of studies into speech based interaction with computers, it is concluded that the interaction be designed to capitalise upon the tendency of operators to use short, succinct, task specific styles of speech. From studies comparing different types of feedback, it is concluded that operators be given screen based feedback, rather than auditory feedback, for control room operation. Feedback will take two forms: the use of the ASR device will require recognition feedback, which will be best supplied using text; the performance of a process control task will require task feedback integrated into the mimic display. This latter feedback can be either textual or symbolic, but it is suggested that symbolic feedback will be more beneficial. Related to both interaction style and feedback is the issue of handling recognition errors. These should be corrected by simple command repetition practices, rather than use error handling dialogues. This method of error correction is held to be non intrusive to primary command and control operations. This thesis also addresses some of the problems of user error in ASR use, and provides a number of recommendations for its reduction.