Techno-economic Appraisal of Concentrating Solar Power Systems (CSP)

The diffusion of Concentrating Solar Power Systems (CSP) systems is currently taking place at a much slower pace than photovoltaic (PV) power systems. This is mainly because of the higher present cost of the solar thermal power plants, but also for the time that is needed in order to build them. Though economic attractiveness of different Concentrating technologies varies, still PV power dominates the market. The price of CSP is expected to drop significantly in the near future and wide spread installation of them will follow. The main aim of this project is the creation of different relevant case studies on solar thermal power generation and a comparison betwwen them. The purpose of this detailed comparison is the techno-economic appraisal of a number of CSP systems and the understanding of their behaviour under various boundary conditions. The CSP technologies which will be examined are the Parabolic Trough, the Molten Salt Power Tower, the Linear Fresnel Mirrors and the Dish Stirling. These systems will be appropriatly sized and simulated. All of the simulations aim in the optimization of the particular system. This includes two main issues. The first is the achievement of the lowest possible levelized cost of electricity and the second is the maximization of the annual energy output (kWh). The project also aims in the specification of these factors which affect more the results and more specifically, in what they contribute to the cost reduction or the power generation. Also, photovoltaic systems will be simulated under same boundary conditions to facolitate a comparison between the PV and the CSP systems. Last but not leats, there will be a determination of the system which performs better in each case study.

PAPR reduction technique for LTE OFDMA systems

Long term evolution (LTE) is the final step toward the 4th generation (4G) of radio technologies designed to increase the capacity and speed of mobile networks. LTE uses orthogonal frequency division multiple access (OFDMA) for the downlink transmission and single carrier-frequency division multiple access (SC-FDMA) for uplink. OFDMA meets the 4G requirement for spectrum flexibility and enables cost-efficient solutions for very wide carriers with high peak rates. However, the potentially large peak-to-average power ratio (PAPR) of the transmitting signals has limited its application. This high PAPR causes interference when the OFDM signals are passed through an amplifier which does not have enough linear range. In this article, we investigate a clipping based PAPR reduction method for LTE OFDMA systems. Simulation results show that the clipping method is reduced PAPR significantly which decreases as the number of clip and filtering level is increased. As a results, increase the mean transmit power, and improve the power amplifier efficiency. This comes at the outlay of complexity, efficiency as well as cost.

A three-dimensional highly interconnected composite oxygen reduction reaction electrocatalyst prepared from a core-shell precursor

Getting intimate: A 3D interconnected Bi_0.5Sr _0.5FeO_3-ð (BSF)-Ag electrocatalyst is prepared from a BSF-AgNO₃ core-shell precursor in one step. The nanometer-sized Ag enhances the sintering process, enabling an optimum cathode microstructure and good cathode-to-electrolyte attachment upon firing at 850°C. A solid-oxide fuel cell based on this cathode shows a near 100% peak power density enhancement at 550°C.

Evaluation and comparison of type reduction algorithms from a forecast accuracy perspective

A variety of type reduction (TR) algorithms have been proposed for interval type-2 fuzzy logic systems (IT2 FLSs). The focus of existing literature is mainly on computational requirements of TR algorithm. Often researchers give more rewards to computationally less expensive TR algorithms. This paper evaluates and compares five frequently used TR algorithms from a forecasting performance perspective. Algorithms are judged based on the generalization power of IT2 FLS models developed using them. Four synthetic and real world case studies with different levels of uncertainty are considered to examine effects of TR algorithms on forecasts accuracies. It is found that Coupland-Jonh TR algorithm leads to models with a better forecasting performance. However, there is no clear relationship between the width of the type reduced set and TR algorithm.

Characteristics and applications of energy storage system to power network - A review

Maintaining reliability and stability of a power systems in transmission and distribution level becomes a big challenge in present scenario. Grid operators are always responsible to maintain equilibrium between available power generation and demand of end users. Maintaining grid balance is a bigger issue, in case of any unexpected generation shortage or grid disturbance or integration of any renewable energy sources like wind and solar power in the energy mix. In order to compensate such imbalance and to facilitate more renewable energy sources with the grid, energy storage system (ESS) started to be playing an important role with the advancement of the state of the art technology. ESS can also help to get reduction in greenhouse gas (GHG) emission by means of integrating more renewable energy sources to the grid. There are various types of Energy Storage (ES) technologies which are being used in power systems network from large scale (above 50MW) to small scale (up to 100KW). Based on the characteristics, each storage technology has their own merits and demerits. This paper carried out extensive review study and verifies merits and demerits of each storage technology and identifies the suitable technology for the future. This paper also has conducted feasibility study with the aid of E-SelectTM tool for various ES technologies in applications point of view at different grid locations. This review study helps to evaluate feasible ES technology for a particular electrical application and also helps to develop smart hybrid storage system for grid applications in efficient way.

Effects of type reduction algorithms on forecasting accuracy of IT2FLS models

Type reduction (TR) is one of the key components of interval type-2 fuzzy logic systems (IT2FLSs). Minimizing the computational requirements has been one of the key design criteria for developing TR algorithms. Often researchers give more rewards to computationally less expensive TR algorithms. This paper evaluates and compares five frequently used TR algorithms based on their contribution to the forecasting performance of IT2FLS models. Algorithms are judged based on the generalization power of IT2FLS models developed using them. Synthetic and real world case studies with different levels of uncertainty are considered to examine effects of TR algorithms on forecasts' accuracies. As per obtained results, Coupland-Jonh TR algorithm leads to models with a higher and more stable forecasting performance. However, there is no obvious and consistent relationship between the widths of the type reduced set and the TR algorithm. © 2013 Elsevier B.V.

On optimally reducing power loss in micro-grids with power storage devices

Smart micro-grids can produce 'renewable' energy and store them in power storage devices. Power loss, however, is a significant problem in power exchange among the micro-grids and between the macro-station and individual micro-grids. To optimally reduce the total power losses in such a power grid system, in this paper, a greedy coalition formation algorithm is proposed, which allows the macro-station to coordinate mutual power exchange among the micro-grids and between each micro-grid and the macro-station. Our algorithm optimizes the total power losses across the entire power grid, including the cost of charging and discharging power storage devices and power losses due to power transfers. The algorithm creates exchange pairs among the micro-grids, giving priority to pairs with higher power loss reduction per exchanged power unit. Through computer-based simulations, we demonstrate that the proposed approach significantly reduces the average power loss compared with the conventional noncooperative method. The simulations also demonstrate that the communications overhead of our proposal (due to negotiations aimed at forming coalitions) does not significantly affect the available communication resource. © 2014 IEEE.

Heritage conservation futures in an age of shifting global power

This article argues that international conservation and heritage governance are now entering new and historically important phases. The economic and political shifts that characterize globalization today are providing a platform for non-Western modes of heritage governance to gain newfound legitimacy on the international stage. With the appropriation of cultural heritage for commercial and political purposes occurring at all levels within the emerging economies of Asia, South America, the Middle East, and Africa, heritage conservation aid now plays an important role in the cultural diplomacy and soft power strategies of numerous countries in these regions. Analyses of the globalization of heritage governance in the mid–late 20th century have focused primarily on intergovernmental bodies, such as UNESCO, at the expense of critically reading the role nation-states continue to play in international conservation and heritage governance policy. Using examples from Asia, this paper addresses this imbalance by re-centering the nation-state in an account that argues the rise of heritage diplomacy, coupled with today’s shifting global order and ongoing reduction in UNESCO’s capacity, hold important implications for heritage conservation over the coming decades.

Automatic layout generation of static CMOS circuits targeting delay and power

The evolution of integrated circuits technologies demands the development of new CAD tools. The traditional development of digital circuits at physical level is based in library of cells. These libraries of cells offer certain predictability of the electrical behavior of the design due to the previous characterization of the cells. Besides, different versions of each cell are required in such a way that delay and power consumption characteristics are taken into account, increasing the number of cells in a library. The automatic full custom layout generation is an alternative each time more important to cell based generation approaches. This strategy implements transistors and connections according patterns defined by algorithms. So, it is possible to implement any logic function avoiding the limitations of the library of cells. Tools of analysis and estimate must offer the predictability in automatic full custom layouts. These tools must be able to work with layout estimates and to generate information related to delay, power consumption and area occupation. This work includes the research of new methods of physical synthesis and the implementation of an automatic layout generation in which the cells are generated at the moment of the layout synthesis. The research investigates different strategies of elements disposition (transistors, contacts and connections) in a layout and their effects in the area occupation and circuit delay. The presented layout strategy applies delay optimization by the integration with a gate sizing technique. This is performed in such a way the folding method allows individual discrete sizing to transistors. The main characteristics of the proposed strategy are: power supply lines between rows, over the layout routing (channel routing is not used), circuit routing performed before layout generation and layout generation targeting delay reduction by the application of the sizing technique. The possibility to implement any logic function, without restrictions imposed by a library of cells, allows the circuit synthesis with optimization in the number of the transistors. This reduction in the number of transistors decreases the delay and power consumption, mainly the static power consumption in submicrometer circuits. Comparisons between the proposed strategy and other well-known methods are presented in such a way the proposed method is validated.

Monopoly power, trade protection and growth: cross industry evidence

This paper investigates the impact of monopoly power on trade policy. Annual panel-databases of Brazilian industries for the years 1988 through 1994 were used. The regressions reported here are robust to openness indicator, concentration index, control variables and sample size, and suggest that industries with higher monopoly power are more protected than competitive sectors. In the period of study the country experienced a major trade liberalization, but the results in the paper show that the reduction in protection was smaller in sectors with higher monopoly power. We thus have evidence favoring recent growth literature which stresses that interest groups with control over creasing productivity. The results here confirm the first part of this argument and show that organized groups in fact are able to obtain policy advantages that reduce competition.

Monopoly power and trade protection: cross- industry evidence

This paper investigates the impact of industry concentration on trade policy. Annual panel-databases of Brazilian industries for the years 1988 through 1994 were used. The regressions reported here are robust to openness indicator. concentration index, control variables and sample size, and suggest that the higher the concentration of a given industry the higher its leveI of trade protection. In the period of study the country experienced a major trade liberalization, but the results in the paper show that the reduction in protection was smaller in more concentrated sectors. Assuming that concentration is ;1 gCl()d proX\' for mOllopoh' po\\'er as it reduces the free-rider problem in coordinating a lobby the results in this paper indicates that interest groups with control over specific markets in fact are able to obtain policy advantages that reduce (international) competition.

Line-pack management for producing electric power on peak periods

The distribution of natural gas is carried out by means of long ducts and intermediate compression stations to compensate the pressure drops due to friction. The natural gas compressors are usually driven by an electric motor or a gas turbine system, offering possibilities for energy management, one of these consisting in generating energy for use in-plant or to commercialize as independent power producer. It can be done by matching the natural gas demand, at the minimum pressure allowed in the reception point, and the storage capacity of the feed duct with the maximum compressor capacity, for storing the natural gas at the maximum permitted pressure. This allows the gas turbine to drive an electric generator during the time in which the decreasing pressure in duct is above the minimum acceptable by the sink unit. In this paper, a line-pack management analysis is done for an existing compression station considering its actual demand curve for determining the economic feasibility of maintaining the gas turbine system driver generating electricity in a peak and off-peak tariff structure. The potential of cost reduction from the point of view of energy resources (natural gas and electric costs) is also analyzed. (C) 2010 Elsevier Ltd. All rights reserved.

Single-phase high power-factor boost ZCS pre-regulator operating in critical conduction mode

This paper presents a new single-phase interleaved high power factor boost pre-regulator operating in critical conduction mode, where the switches and boost diode performing zero-current commutations during its turn-off, eliminating the disadvantages related to the reverse recovery losses and electromagnetic interference problems of the boost diode, when operating in the continuous conduction mode. The interleaving technique is applied in the power cell, providing a significant input current ripple reduction in comparison to discontinuous mode of operation, due to its input current continuous conduction operation. This paper presents a complete modeling for the converter operating in critical conduction mode, resulting in an improved design procedure for interleaved techniques with high input power factor, a complete design procedure, and main simulation results from a design example with two interleaved cells rated at 1kW, 400V output voltage and 220V rms input voltage.

Fault section estimation in electric power systems using an optimization immune algorithm

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

An Efficient Codification to Solve Distribution Network Reconfiguration for Loss Reduction Problem

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)