Plasma immersion ion implantation of nitrogen into H13 steel under moderate temperatures

Ion implantation of nitrogen into samples of tempered and quenched H13 steel was carried out by plasma immersion technique. A glow discharge plasma of nitrogen species was the ion source and the negative high voltage pulser provided 10-12 kV, 60 mu s duration and 1.0-2.0 kHz frequency, flat voltage pulses. The temperatures of the samples remained between 300 and 450 degrees C, sustained solely by the ion bombardment. In some of the discharges, we used a N-2 + H-2 gas mixture with 1:1 ratio. PIII treatments as long as 3, 6, 9 and up to 12 h were carried out to achieve as thickest treated layer as possible, and we were able to reach over 20 mu m treated layers, as a result of ion implantation and thermal (and possibly radiation enhanced) diffusion. The nitrogen depth profiles were obtained by GDOS (Glow Discharge Optical Spectroscopy) and the exact composition profiles by AES (Auger Electron Spectroscopy). The hardness of the treated surface was increased by more than 250%, reaching 18.8 GPa. No white layer was seen in this case. A hardness profile was obtained which corroborated a deep hardened layer, confirming the high efficacy of the moderate temperature PIII treatment of steels. (c) 2005 Elsevier B.V. All rights reserved.

Effects of the high-temperature plasma immersion ion-implantation treatment on corrosion behavior of Ti-6Al1-4V

Nitrogen implantation into Ti alloys at higher temperatures improves their mechanical and corrosion resistance properties by forming a thicker nitride layer. In this paper, two different sets of Ti-6Al-4V samples were plasma immersion ion implantation (PIII)-treated using nitrogen plasma, varying the treatment time from 30 to 150 min (800 degrees C) and the process temperature from 400 degrees C to 800 degrees C (t = 60 min). Nanoindentation measurements of the PIII-treated samples at 800 C during 150 min showed the highest hardness value, 24 GPa, which is about four times bigger than untreated sample hardness. The N penetration at these conditions reached approximately 150 nm as analyzed by Auger spectroscopy. on the other hand, the lowest passive current density (3 x 10(-7) A. cm(-2)) was obtained for a PIII-treated sample during 30 min at higher temperature (800 degrees C). The corrosion resistance of this sample is almost the same as for the untreated specimen. Corrosion behavior evidenced that in strong oxidizing media, all PIII-treated samples are more corrosion resistant than the untreated one. PIII processing at higher temperatures promotes smoothing of the sample surface as observed by scanning electron microscopy (SEM). Grazing incidence X-ray diffraction analyses of the untreated samples identified the two typical Ti phases, Ti alpha and Ti beta. After the implantation, Ti2N and TiO2 phases were also detected.

Modification of surface properties of Ti-16Si-4B powder alloy by plasma immersion ion implantation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of plasma immersion ion implantation into silicon substrate using magnetic mirror geometry

The effect of magnetic field enhanced plasma immersion ion implantation (PIII) in silicon substrate has been investigated at low and high pulsed bias voltages. The magnetic field in magnetic bottle configuration was generated by two magnetic coils installed outside the vacuum chamber. The presence of both, electric and magnetic field in PIII creates a system of crossed E x B fields, promoting plasma rotation around the target. The magnetized electrons drifting in crossed E x B fields provide electron-neutral collision. Consequently, the efficient background gas ionization augments the plasma density around the target where a magnetic confinement is achieved. As a result, the ion current density increases, promoting changes in the samples surface properties, especially in the surface roughness and wettability and also an increase of implantation dose and depth. (C) 2012 Elsevier B. V. All rights reserved.

Study of superficial properties of titanium treated by PIIID

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ketoconazole in the treatment of experimental murine paracoccidioidomycosis

In a murine model of chronic disseminated paracoccidioidomycosis (strain 18; intravenous route), Ketoconazole (200 mg/kg in 0.2% agar) was given daily by gavage in three different schedules. Continuous treatment from an early stage of infection (day 3) up to week 20 was the most effective protocol, leading to remission of histopathological lesions and of both humoral and cellular anti-P. brasiliensis immune response, and clearance of the fungus in lungs; only 1 treated animal at week 20 showed pulmonary granulomas, although less extensive than control mice. Continuous treatment from early stage up to week 8, followed by a 16 week-period of drug discontinuity, caused remission of lesions in all but 3 treated mice which showed active pulmonary paracoccidioidomycosis similar to controls (14.2% of unresponsiveness to treatment). The continuous Ketoconazole protocol since a late stage of infection (week 4) up to week 20 produced a slower remission of lesions and immune response when compared with the first drug schedule. In this model of paracoccidioidomycosis, Ketoconazole showed no detectable side-effects and was a very effective drug especially in a prolonged administration protocol from an early stage of infection.

Severe forms of neurocysticercosis: Treatment with albeimdazole

Study of 22 patients with the severe form of neurocysticercosis treated with albendazole (ABZ) administered in 6 different schedules ranging from 15 to 30 mg/kg/day for 21 to 60 days. Dextrochloropheniramine and ketoprofen were the adjuvant drugs Multiple symptoms were observed in 90 9% of patients. Intracranial hypertension was manifested in 90.9%. Hydrocephaly occurred in 86.4%. Evolution was satisfactory in 10 patients, 8 died and 4 had sequelae. Tomographic studies showed the appearance of an isolated IVth ventricle in 9 patients, after ventriculoperitoneal shunt, before ABZ treatment in 3 of them, during in 5 and after treatment in one. Median clinical follow-up duration was 10 months for the patients who died and 3-4 years for survivors. In 3 patients there was an increase in cyst size during the administration of the 15 mg/kg/day ABZ dose, which was not observed in any patient when the 30 mg/kg/day dose was used.

Miopatia do multicore: Análise histoquímica de uma família

In this paper the authors describe three cases of multicore myopathy in the same family. Case J was a white 77-year-old patient with proximal muscular atrophy and weakness, global hypotonia and global hypoactive deep tendon reflexes. Motor and sensory conduction studies were normal in all limbs. EMG examination showed a myopathic pattern with frequent spontaneous activity consisting of fibrillations and positive sharp waves. Histochemical reactions showed typical oxidative alterations of multicore myopathy. Cases 2 and 3 were the son and the daughter of case 1 respectively. They were both non-symptomatic patients with minimal EMG and histochemical alterations. These three patients illustrated the great clinical variability of this condition.

Immunological alterations in patients with primary tumors in central nervous system

Natural killer (NK) cells play an important role in immune surveillance against tumors. The present work aimed to study the cytotoxic activity of NK cells and T cell subsets in peripheral blood of 13 patients with primary tumors in central nervous system (CNS). As controls 29 healthy subjects with the age range equivalent to the patients were studied. The methods employed were: a) determination of cytotoxic activity of NK cells towards K562 target cells, evaluated by single cell-assay; b) enumeration of CD3+ lymphocytes and their CD4+ and CD8+ subsets defined by monoclonal antibodies; c) the identification of tumors were done by histologic and immunochemistry studies. The results indicated that adults and children with tumor in CNS display reduced percentage of total T cells, helper/inducer subset and low helper/suppressor ratio. The cytotoxic activity of NK cells was decreased in patients with CNS tumors due mainly to a decrease in the proportion of target-binding lymphocytes. These results suggest that cytotoxic activity of NK cells may be affected by the immunoregulatory disturbances observed in patients with primary tumors in CNS.

Biomass production and essential oil yield in Ageratum conyzoides L. - Asteraceae in different stages of development

An experiment was carried out at Sâo Manuel Experimental Farm, FCA-UNESP, Botucatu-SP, in 1994 and 1995, aiming to determine the biomass production and essential oil yield of mentrasto (Ageratum conyzoides L. - Asteraceae) in different stages of development. The statistical design used was a complete randomized block with 8 replications and 3 treatments (pre-flowering, flowering and post-flowering). The spacing was 70 cm between rows and 50 cm between plants, with 70 plants/parcel. The seedlings were transplanted 40 days after sowing. After harvesting, the fragments (roots, stems, leaves, flowers) and whole plants were washed, separated and weighted. The extractions of essential oil were done by hydrodistillation, using Clevenger apparatus, for two hours. There were statistic differences (Tukey 5%) in fresh weight of all vegetal parts w'hen harvested in different development stages. About essential oil yield, statistic differences were not verified among the treatments.

Morphological aspects of rabbit masseter muscle after cervical sympathectomy

The objective of this paper was to study the effect of sympathetic innervation on morphological and histochemical aspects of skeletal muscle tissue. Rabbit masseter muscle was studied using histochemical and immunohistochemical methods for periods of up to 18 months post-sympathectomy. The morphological and enzymatic characteristics of control masseter muscles were similar on both the left and right sides. The main features were muscle fibres with a mosaic pattern and a predominance of type IIa fibres, followed by type I. Type IIb fibres showed very low frequency. Sympathectomized animals showed varying degrees of metabolic and morphological alterations, especially 18 months after sympathectomy. The first five groups showed a higher frequency of type I fibres, whilst the oldest group showed a higher frequency of type lib fibres. In the oldest group, a significant variation in fibre diameter was observed. Many fibres showed small diameter, atrophy, hypertrophy, splitting, and necrosis. Areas with fibrosis were observed. Thus cervical sympathectomy induced morphological alterations in the masseter muscles. These alterations were, in part, similar to both denervation and myopathy. These findings indicate that sympathetic innervation contributes to the maintenance of the morphological and metabolic features of masseter muscle fibres.

Polymer treatment by plasma immersion ion implantation of nitrogen for formation of diamond-like carbon film

Nitrogen ions were implanted by plasma immersion in Kapton, Mylar and polypropylene, with the objective of forming a diamond-like carbon layer on these polymers. The Raman spectrum of the implanted polypropylene showed typical Diamond-Like Carbon (DLC) graphite (G) and disorder (D) peaks, with an sp 3/sp2 hybridization ratio of approximately 0.4 to 0.6. The XPS analysis of the three implanted polymers also showed peaks of C-C and N-C bonds in the sp3 configuration, with hybridization ratios in the same range as the Raman result. The implanted polymers were exposed to oxygen plasma to test the resistance of the polymers to oxygen degradation. Mass loss rate results, however, showed that the DLC layer formed is not sufficiently robust for this application. Nevertheless, the layer formed can be suitable for other applications such as in gas barriers in beverage containers. Further study of implantation conditions may improve the quality of the DLC layer.

Two dimensional computer simulation of plasma immersion ion implantation

The biggest advantage of plasma immersion ion implantation (PIII) is the capability of treating objects with irregular geometry without complex manipulation of the target holder. The effectiveness of this approach relies on the uniformity of the incident ion dose. Unfortunately, perfect dose uniformity is usually difficult to achieve when treating samples of complex shape. The problems arise from the non-uniform plasma density and expansion of plasma sheath. A particle-in-cell computer simulation is used to study the time-dependent evolution of the plasma sheath surrounding two-dimensional objects during process of plasma immersion ion implantation. Before starting the implantation phase, steady-state nitrogen plasma is established inside the simulation volume by using ionization of gas precursor with primary electrons. The plasma self-consistently evolves to a non-uniform density distribution, which is used as initial density distribution for the implantation phase. As a result, we can obtain a more realistic description of the plasma sheath expansion and dynamics. Ion current density on the target, average impact energy, and trajectories of the implanted ions were calculated for three geometrical shapes. Large deviations from the uniform dose distribution have been observed for targets with irregular shapes. In addition, effect of secondary electron emission has been included in our simulation and no qualitative modifications to the sheath dynamics have been noticed. However, the energetic secondary electrons change drastically the plasma net balance and also pose significant X-ray hazard. Finally, an axial magnetic field has been added to the calculations and the possibility for magnetic insulation of secondary electrons has been proven.

Effects of Plasma Immersion Ion Implantation (PIII) of nitrogen on hardness, composition and corrosion resistance of Ti-6Al-4V alloy

Ti-6Al-4V samples have been treated by PHI processing at different temperatures (400-800°C), treatment time (30-150 min) and plasma potential (100 and 420 V). Hardness measurements results showed an enhancement of the hardness for all implanted samples. XRD results detected the Ti 2N phase and the best corrosion resistance was found for the samples processed at higher temperature and lower PIII time.