Complexity of rupture propagation in large earthquakes in relation to tectonic environment

Complexity in the earthquake rupture process can result from many factors. This study investigates the origin of such complexity by examining several recent, large earthquakes in detail. In each case the local tectonic environment plays an important role in understanding the source of the complexity.

Several large shallow earthquakes (M_s > 7.0) along the Middle American Trench have similarities and differences between them that may lead to a better understanding of fracture and subduction processes. They are predominantly thrust events consistent with the known subduction of the Cocos plate beneath N. America. Two events occurring along this subduction zone close to triple junctions show considerable complexity. This may be attributable to a more heterogeneous stress environment in these regions and as such has implications for other subduction zone boundaries.

An event which looks complex but is actually rather simple is the 1978 Bermuda earthquake (M_s ~ 6). It is located predominantly in the mantle. Its mechanism is one of pure thrust faulting with a strike N 20°W and dip 42°NE. Its apparent complexity is caused by local crustal structure. This is an important event in terms of understanding and estimating seismic hazard on the eastern seaboard of N. America.

A study of several large strike-slip continental earthquakes identifies characteristics which are common to them and may be useful in determining what to expect from the next great earthquake on the San Andreas fault. The events are the 1976 Guatemala earthquake on the Motagua fault and two events on the Anatolian fault in Turkey (the 1967, Mudurnu Valley and 1976, E. Turkey events). An attempt to model the complex P-waveforms of these events results in good synthetic fits for the Guatemala and Mudurnu Valley events. However, the E. Turkey event proves to be too complex as it may have associated thrust or normal faulting. Several individual sources occurring at intervals of between 5 and 20 seconds characterize the Guatemala and Mudurnu Valley events. The maximum size of an individual source appears to be bounded at about 5 x 10²⁶ dyne-cm. A detailed source study including directivity is performed on the Guatemala event. The source time history of the Mudurnu Valley event illustrates its significance in modeling strong ground motion in the near field. The complex source time series of the 1967 event produces amplitudes greater by a factor of 2.5 than a uniform model scaled to the same size for a station 20 km from the fault.

Three large and important earthquakes demonstrate an important type of complexity --- multiple-fault complexity. The first, the 1976 Philippine earthquake, an oblique thrust event, represents the first seismological evidence for a northeast dipping subduction zone beneath the island of Mindanao. A large event, following the mainshock by 12 hours, occurred outside the aftershock area and apparently resulted from motion on a subsidiary fault since the event had a strike-slip mechanism.

An aftershock of the great 1960 Chilean earthquake on June 6, 1960, proved to be an interesting discovery. It appears to be a large strike-slip event at the main rupture's southern boundary. It most likely occurred on the landward extension of the Chile Rise transform fault, in the subducting plate. The results for this event suggest that a small event triggered a series of slow events; the duration of the whole sequence being longer than 1 hour. This is indeed a "slow earthquake".

Perhaps one of the most complex of events is the recent Tangshan, China event. It began as a large strike-slip event. Within several seconds of the mainshock it may have triggered thrust faulting to the south of the epicenter. There is no doubt, however, that it triggered a large oblique normal event to the northeast, 15 hours after the mainshock. This event certainly contributed to the great loss of life-sustained as a result of the Tangshan earthquake sequence.

What has been learned from these studies has been applied to predict what one might expect from the next great earthquake on the San Andreas. The expectation from this study is that such an event would be a large complex event, not unlike, but perhaps larger than, the Guatemala or Mudurnu Valley events. That is to say, it will most likely consist of a series of individual events in sequence. It is also quite possible that the event could trigger associated faulting on neighboring fault systems such as those occurring in the Transverse Ranges. This has important bearing on the earthquake hazard estimation for the region.

O Protocolo de Kyoto e o mercado de crédito de carbono: estudo de caso das emissões de gases de efeito estufa da fábrica de combustível nuclear pertencente às Indústrias Nucleares do Brasil no ano de 2008

A presente dissertação discute as questões relacionadas à intensificação das mudanças climáticas por causas antrópicas conforme a evolução no uso dos recursos naturais, inovações nos processos produtivos, transformações econômicas, sociais, culturais, políticas e, especialmente ambientais. Aborda a comercialização dos créditos de carbono através de projetos de Mecanismo de Desenvolvimento Limpo (MDL), um dos mecanismos de flexibilização criados pelo Protocolo de Kyoto. No contexto de mudanças climáticas, uma matriz energética que utilize fontes de energia que não emitam gases causadores do efeito estufa (GEE) se mostra uma importante estratégia de desenvolvimento sustentável. Sob essa perspectiva, a energia nucleoelétrica é apresentada como uma alternativa viável aos combustíveis fósseis, considerando que esta é uma energia limpa e compatível com a perspectiva de desenvolvimento sustentável. A Fábrica de Combustível Nuclear (FCN), localizada em Resende (Rio de Janeiro), pertencente às Indústrias Nucleares do Brasil (INB), é um conjunto de sofisticadas fábricas nas quais se processam etapas importantes do ciclo do combustível nuclear. Na FCN, o Centro Zoobotânico realiza a gestão das atividades voltadas para a conservação da natureza tais como o Programa de Recuperação de Mata Ciliar, Reflorestamento e Fauna. O Relatório de inventário das emissões diretas e indiretas de GEE da FCN, elaborado pela INB para o ano de 2008, permite a auto-avaliação da empresa, retratando a preocupação corporativa com as questões relativas às mudanças climáticas. Segundo este Relatório, o total de emissões de GEE quantificado corresponde a 12,14% da capacidade total de sequestro de dióxido de carbono, no período de Janeiro a Dezembro de 2008. A proteção de florestas e a plantação de árvores são componentes essenciais de qualquer estratégia global para mitigação da mudança climática, e a participação da INB no mercado de crédito de carbono pode proporcionar externalidades positivas, tais como ganhos de imagem, adequação a padrões ambientais e melhoria do relacionamento com a sociedade.

Action of ecdysterone on the moulting of amphipod females: Gammarus pulex (L.) and G.fossarum Koch. Early results. [Translation from: Crustaceana 28, 86-88, 1975.]

In studying sexual attraction in gammarids of the group pulex, it has seemed necessary to dissociate the processes of moulting and ovogenesis in order to recognize their respective effects on this phenomenon. For this purpose a synthetic hormone, ecdysterone, was utilized. In the first instance the author followed the action of the hormone on isolated females in vitellogenesis. It was proved that the behaviour of Gammarus pulex and Gammarus fossarum vis-a-vis the ecdysterone used proves to be very close to that of isopods that was observed in Orchestia gammarellus in earlier research. Although they were in vitellogenesis, the females saw their intermoult cycle shortened.

Quantum Mechanics Studies of Fuel Cell Catalysts and Proton Conducting Ceramics with Validation by Experiment

We carried out quantum mechanics (QM) studies aimed at improving the performance of hydrogen fuel cells. This led to predictions of improved materials, some of which were subsequently validated with experiments by our collaborators.

In part I, the challenge was to find a replacement for the Pt cathode that would lead to improved performance for the Oxygen Reduction Reaction (ORR) while remaining stable under operational conditions and decreasing cost. Our design strategy was to find an alloy with composition Pt3M that would lead to surface segregation such that the top layer would be pure Pt, with the second and subsequent layers richer in M. Under operating conditions we expect the surface to have significant O and/or OH chemisorbed on the surface, and hence we searched for M that would remain segregated under these conditions. Using QM we examined surface segregation for 28 Pt₃M alloys, where M is a transition metal. We found that only Pt₃Os and Pt₃Ir showed significant surface segregation when O and OH are chemisorbed on the catalyst surfaces. This result indicates that Pt₃Os and Pt3Ir favor formation of a Pt-skin surface layer structure that would resist the acidic electrolyte corrosion during fuel cell operation environments. We chose to focus on Os because the phase diagram for Pt-Ir indicated that Pt-Ir could not form a homogeneous alloy at lower temperature. To determine the performance for ORR, we used QM to examine all intermediates, reaction pathways, and reaction barriers involved in the processes for which protons from the anode reactions react with O₂ to form H₂O. These QM calculations used our Poisson-Boltzmann implicit solvation model include the effects of the solvent (water with dielectric constant 78 with pH 7 at 298K). We found that the rate determination step (RDS) was the O_ad hydration reaction (O_ad + H₂O_ad -> OH_ad + OH_ad) in both cases, but that the barrier for pure Pt of 0.50 eV is reduced to 0.48 eV for Pt₃Os, which at 80 degrees C would increase the rate by 218%. We collaborated with the Pu-Wei Wu’s group to carry out experiments, where we found that the dealloying process-treated Pt2Os catalyst showed two-fold higher activity at 25 degrees C than pure Pt and that the alloy had 272% improved stability, validating our theoretical predictions.

We also carried out similar QM studies followed by experimental validation for the Os/Pt core-shell catalyst fabricated by the underpotential deposition (UPD) method. The QM results indicated that the RDS for ORR is a compromise between the OOH formation step (0.37 eV for Pt, 0.23 eV for Pt_2ML/Os core-shell) and H₂O formation steps (0.32 eV for Pt, 0.22 eV for Pt_2ML/Os core-shell). We found that Pt_2ML/Os has the highest activity (compared to pure Pt and to the Pt₃Os alloy) because the 0.37 eV barrier decreases to 0.23 eV. To understand what aspects of the core shell structure lead to this improved performance, we considered the effect on ORR of compressing the alloy slab to the dimensions of pure Pt. However this had little effect, with the same RDS barrier 0.37 eV. This shows that the ligand effect (the electronic structure modification resulting from the Os substrate) plays a more important role than the strain effect, and is responsible for the improved activity of the core- shell catalyst. Experimental materials characterization proves the core-shell feature of our catalyst. The electrochemical experiment for Pt_2ML/Os/C showed 3.5 to 5 times better ORR activity at 0.9V (vs. NHE) in 0.1M HClO₄ solution at 25 degrees C as compared to those of commercially available Pt/C. The excellent correlation between experimental half potential and the OH binding energies and RDS barriers validate the feasibility of predicting catalyst activity using QM calculation and a simple Langmuir–Hinshelwood model.

In part II, we used QM calculations to study methane stream reforming on a Ni-alloy catalyst surfaces for solid oxide fuel cell (SOFC) application. SOFC has wide fuel adaptability but the coking and sulfur poisoning will reduce its stability. Experimental results suggested that the Ni4Fe alloy improves both its activity and stability compared to pure Ni. To understand the atomistic origin of this, we carried out QM calculations on surface segregation and found that the most stable configuration for Ni₄Fe has a Fe atom distribution of (0%, 50%, 25%, 25%, 0%) starting at the bottom layer. We calculated that the binding of C atoms on the Ni4Fe surface is 142.9 Kcal/mol, which is about 10 Kcal/mol weaker compared to the pure Ni surface. This weaker C binding energy is expected to make coke formation less favorable, explaining why Ni₄Fe has better coking resistance. This result confirms the experimental observation. The reaction energy barriers for CHx decomposition and C binding on various alloy surface, Ni₄X (X=Fe, Co, Mn, and Mo), showed Ni₄Fe, Ni₄Co, and Fe₄Mn all have better coking resistance than pure Ni, but that only Ni₄Fe and Fe₄Mn have (slightly) improved activity compared to pure Ni.

In part III, we used QM to examine the proton transport in doped perovskite-ceramics. Here we used a 2x2x2 supercell of perovskite with composition Ba₈X₇M₁(OH)₁O₂₃ where X=Ce or Zr and M=Y, Gd, or Dy. Thus in each case a 4⁺ X is replace by a 3⁺ M plus a proton on one O. Here we predicted the barriers for proton diffusion allowing both includes intra-octahedron and inter-octahedra proton transfer. Without any restriction, we only observed the inter-octahedra proton transfer with similar energy barrier as previous computational work but 0.2 eV higher than experimental result for Y doped zirconate. For one restriction in our calculations is that the O_donor-O_acceptor atoms were kept at fixed distances, we found that the barrier difference between cerates/zirconates with various dopants are only 0.02~0.03 eV. To fully address performance one would need to examine proton transfer at grain boundaries, which will require larger scale ReaxFF reactive dynamics for systems with millions of atoms. The QM calculations used here will be used to train the ReaxFF force field.

紫外激光诱导近化学计量比钽酸锂晶体铁电畴反转

对紫外激光诱导近化学计量比钽酸锂晶体铁电畴反转进行了实验研究。波长为351 nm的连续紫外激光被聚焦在近化学计量比钽酸锂晶体的-z表面,同时沿与晶体自发极化相反的方向施加均匀外电场。实验证实紫外激光辐照可以有效地降低晶体畴反转所需的矫顽电场,采用数字全息干涉测量技术检测证实在激光辐照区域实现局域畴反转。研究表明采用紫外激光诱导可以实现对近化学计量比钽酸锂晶体铁电畴反转的局域控制。提出了物理机理的理论分析,认为外电场和激光辐照场的共同作用在晶体内部产生高浓度、大尺寸的缺陷结构,缺陷一定程度上降低畴体成核和畴

Reversible electrochromic effect accompanying domain-inversion in LiNbO3 : Ru : Fe crystals

A reversible electrochromic effect during the electrical poling process in LiNbO3:Ru:Fe crystals at room temperature is observed. In electrode area, both electrochromism and domain-inversion occur mutually and electrochromism is reversible during back-switch poling, which are experimentally verified, and a microstructure model to explain the mechanism is proposed. In addition, different from the undoped LiNbO3 crystals, the breakdown field (> 25.0 kV/mm) is higher than the coercive (21.0 kV/mm) measured in LiNbO3:Ru:Fe, which proves a possible new technique to realize domain-inversion by constant electric field rather than pulsed one. (c) 2005 American Institute of Physics.

Influences of phase shift on superresolution performances of annular filters

This paper investigates the influences of phase shift on superresolution performances of annular filters. Firstly, it investigates the influence of phase shift on axial superresolution. It proves theoretically that axial superresolution can not be obtained by two-zone phase filter with phase shift pi, and it gets the phase shift with which axial superresolution can be brought by two-zone phase filter. Secondly, it studies the influence of phase shift on transverse superresolution. It finds that the three-zone phase filter with arbitrary phase shift has an almost equal optimal transverse gain to that of commonly used three-zone phase filter, but can produce a much higher axial superresolution gain. Thirdly, it investigates the influence of phase shift on three-dimensional superresolution. Three-dimensional superresolution capability and design margin of three-zone complex filter with arbitrary phase shift are obtained, which presents the theoretical basis for three-dimensional superresolution design. Finally, it investigates the influence of phase shift on focal shift. To obtain desired focal shifts, it designs a series of three-zone phase filters with different phase shifts. A spatial light modulator (SLM) is used to implement the designed filters. By regulating the voltage imposed on the SLM, an accurate focal shift control is obtained.

I. Electronic states of heavily-doped molecular crystals--naphthalene. I. Theoretical. II. Experimental. II. Lowest singlet and triplet excited states of pyrazine

PART I

The energy spectrum of heavily-doped molecular crystals was treated in the Green’s function formulation. The mixed crystal Green’s function was obtained by averaging over all possible impurity distributions. The resulting Green’s function, which takes the form of an infinite perturbation expansion, was further approximated by a closed form suitable for numerical calculations. The density-of-states functions and optical spectra for binary mixtures of normal naphthalene and deuterated naphthalene were calculated using the pure crystal density-of-state functions. The results showed that when the trap depth is large, two separate energy bands persist, but when the trap depth is small only a single band exists. Furthermore, in the former case it was found that the intensities of the outer Davydov bands are enhanced whereas the inner bands are weakened. Comparisons with previous theoretical calculations and experimental results are also made.

PART II

The energy states and optical spectra of heavily-doped mixed crystals are investigated. Studies are made for the following binary systems: (1) naphthalene-h₈ and d₈, (2) naphthalene--h₈ and αd₄, and (3) naphthalene--h₈ and βd₁, corresponding to strong, medium and weak perturbations. In addition to ordinary absorption spectra at 4˚K, band-to-band transitions at both 4˚K and 77˚K are also analyzed with emphasis on their relations to cooperative excitation and overall density-of-states functions for mixed crystals. It is found that the theoretical calculations presented in a previous paper agree generally with experiments except for cluster states observed in system (1) at lower guest concentrations. These features are discussed semi-quantitatively. As to the intermolecular interaction parameters, it is found that experimental results compare favorably with calculations based on experimental density-of-states functions but not with those based on octopole interactions or charge-transfer interactions. Previous experimental results of Sheka and the theoretical model of Broude and Rashba are also compared with present investigations.

PART III

The phosphorescence, fluorescence and absorption spectra of pyrazine-h₄ and d₄ have been obtained at 4˚K in a benzene matrix. For comparison, those of the isotopically mixed crystal pyrazine-h₄ in d₄ were also taken. All these spectra show extremely sharp and well-resolved lines and reveal detailed vibronic structure.

The analysis of the weak fluorescence spectrum resolves the long-disputed question of whether one or two transitions are involved in the near-ultraviolet absorption of pyrazine. The “mirror-image relationship” between absorption and emission shows that the lowest singlet state is an allowed transition, properly designated as ¹B_3u ← ¹A_1g. The forbidden component ¹B_2g, predicted by both “exciton” and MO theories to be below the allowed component, must lie higher. Its exact location still remains uncertain.

The phosphorescence spectrum when compared with the excitation phosphorescence spectra, indicates that the lowest triplet state is also symmetry allowed, showing a strong 0-0 band and a “mirror-image relationship” between absorption and emission. In accordance with previous work, the triplet state is designated as ³B_3u.

The vibronic structure of the phosphorescence spectrum is very complicated. Previous work on the analysis of this spectrum all concluded that a long progression of v_6a exists. Under the high resolution attainable in our work, the supposed v_6a progression proves to have a composite triplet structure, starting from the second member of the progression. Not only is the v_9a hydrogen-bending mode present as shown by the appearance of the C-D bending mode in the d₄ spectrum, but a band of 1207 cm^-1 in the pyrazine in benzene system and 1231 cm^-1 in the mixed crystal system is also observed. This band is assigned as 2v_6b and of a_1g symmetry. Its anonymously strong intensity in the phosphorescence spectrum is interpreted as due to the Fermi resonance with the 2v_6a and v_9a band.

To help resolve the present controversy over the crystal phosphorescence spectrum of pyrazine, detailed vibrational analyses of the emission spectra were made. The fluorescence spectrum has essentially the same vibronic structure as the phosphorescence spectrum.

Exciplexes in fluorescence quenching of aromatic hydrocarbons by tertiary aliphatic amines

Strong quenching of the fluorescence of aromatic hydrocarbons by tertiary aliphatic amines has been observed in solution at room temperature. Accompanying the fluorescence quenching of aromatic hydrocarbons, an anomalous emission is observed. This new emission is very broad, structureless and red-shifted from the original hydrocarbon fluorescence.

Kinetic studies indicate that this anomalous emission is due to an exciplex formed by an aromatic hydrocarbon molecule in its lowest excited singlet state with an amine molecule. The fluorescence quenching of the aromatic hydrocarbons is due to the depopulation of excited hydrocarbon molecules by the formation of exciplexes, with subsequent de-excitation of exciplexes by either radiative or non-radiative processes.

Analysis of rate constants shows the electron-transfer nature of the exciplex. Through the study of the effects on the frequencies of exciplex emissions of substituents on the hydrocarbons, it is concluded that partial electron transfer from the amine molecule to the aromatic hydrocarbon molecule in its lowest excited singlet state occurs in the formation of exciplex. Solvent effects on the exciplex emission frequencies further demonstrate the polar nature of the exciplex.

A model based on this electron-transfer nature of exciplex is proposed and proves satisfactory in interpreting the exciplex emission phenomenon in the fluorescence quenching of aromatic hydrocarbons by tertiary aliphatic amines.

Discussions about FFT-based two-step phase-shifting algorithm

An FFT-based two-step phase-shifting (TPS) algorithm is described in detail and implemented by use of experimental interferograms. This algorithm has been proposed to solve the TPS problem with random phase shift except pi. By comparison with the visibility-function-based TPS algorithm, it proves that the FFT-based algorithm has obvious advantages in phase extracting. Meanwhile, we present a pi-phase-shift supplement to the TPS algorithm, which combines the two interferograms and demodulates the phase map by locating the extrema of the combined fringes after removing the respective backgrounds. So combining this method and FFT-based one, one could really implement the TPS with random phase shift. Whereafter, we systematically compare the TPS with single-interferogram analysis algorithm and conventional three-step phase-shifting one. The results demonstrate that the FFT-based TPS algorithm has a satisfactory accuracy. At last, based on the polarizing interferometry, a schematic setup of two-channel TPS interferometer with random phase shift is suggested to implement the simultaneous collection of interferograms. (c) 2007 Elsevier GrnbH. All rights reserved.

Coma measurement by use of an alternating phase-shifting mask mark with a specific phase width

The correlation between the coma sensitivity of the alternating phase-shifting mask (Alt-PSM) mark and the mark's structure is studied based on the Hopkins theory of partially coherent imaging and positive resist optical lithography (PROLITH) simulation. It is found that an optimized Alt-PSM mark with its phase width being two-thirds its pitch has a higher sensitivity to coma than Alt-PSM marks with the same pitch and the different phase widths. The pitch of the Alt-PSM mark is also optimized by PROLITH simulation, and the structure of p - 1.92 lambda/NA and pw = 2p/3 proves to be with the highest sensitivity. The optimized Alt-PSM mark is used as a measurement mark to retrieve coma aberration from the projection optics in lithographic tools. In comparison with an ordinary Alt-PSM mark with its phase width being a half its pitch, the measurement accuracies of Z(7) and Z(14) apparently increase. (C) 2009 Optical Society of America

A construção da síndrome pré-menstrual

Esta pesquisa visa problematizar a síndrome pré-menstrual (SPM) enquanto entidade biomédica a-histórica tornada evidente a partir do preenchimento de critérios diagnósticos. O ponto de partida é a hipótese de que o modelo biomédico de explicação da SPM incorpora e reproduz os padrões sociais vigentes que insistem em visões estereotipadas dos gêneros em função da diferenciação biológica dos sexos. A partir de uma reflexão sobre a construção do fato científico e da preponderância do discurso biomédico na compreensão dos corpos, emoções e comportamentos femininos, analisamos as mudanças históricas ocorridas nessa visão considerada reducionista. No final do século XVIII e início do XIX, a essência da feminilidade era localizada no útero; a partir de meados do século XIX, os ovários passaram a ser considerados a fonte das doenças das mulheres, inclusive as nervosas e mentais. No início do século XX começou a ocorrer uma mudança nos discursos biomédicos e a essência da feminilidade passou a ser localizada em substâncias químicas denominadas hormônios. Desde então o organismo feminino tornou-se cada vez mais representado como controlado pelos hormônios, reificando a crença de que as mulheres são cíclicas e em determinados períodos, instáveis, irracionais e, portanto, não confiáveis. Essa ênfase nos hormônios coincide com a primeira descrição, em 1931, do que era chamado tensão pré-menstrual. Na década de 1950, a terminologia mudou para síndrome pré-menstrual. Inicialmente foi compreendida como diretamente produzida pelos hormônios femininos, mas não há evidência empírica que comprove esta hipótese. Após 80 anos de pesquisas, não se encontrou um marcador biológico ou teste bioquímico que possa ser utilizado para o diagnóstico. Os próprios critérios diagnósticos não são consensuais entre os pesquisadores, pois foram descritos mais de 200 sintomas que incidem de forma variada e inconstante. Não se conhece ainda o mecanismo etiopatogênico e alguns autores questionam a própria existência da síndrome enquanto entidade biomédica e apresentam visões feministas e sócio-culturais para a compreensão do fenômeno. Muitas mulheres, entretanto, afirmam ter TPM (nomenclatura mais comum nos meios leigos). Para aprofundar esta questão e ampliar nossa compreensão, a análise de artigos biomédicos recentes (2000 a 2011) sobre a SPM foi confrontada com a experiência direta ou indireta da TPM em mulheres de camadas médias da população. Com este objetivo, foram analisados artigos científicos sobre a SPM selecionados a partir de um levantamento no PubMed, ferramenta de buscas online, e realizadas entrevistas individuais em profundidade, abertas, semi-estruturadas com mulheres em idade reprodutiva selecionadas através do sistema de amostragem conhecido como bola de neve (snow ball). Após a análise tanto dos artigos científicos quanto das entrevistas, concluímos que apesar de pressupostos comuns que a biologia determina diferenças de gênero naturais e universais entre homens e mulheres a SPM dos artigos biomédicos e a TPM das mulheres não coincidem. Sem desconsiderar as sensações desagradáveis, os problemas e o sofrimento das mulheres que afirmam ter TPM, os resultados deste estudo apontam para uma realidade complexa que enseja mais pesquisa em direção a descrições menos reducionistas destas experiências femininas

Gestão do trabalho na Estratégia Saúde da Família em municípios do Estado do Rio de Janeiro com mais de 500 mil habitantes: o caso do Rio de Janeiro e Duque de Caxias

Não obstante ao aumento do número de equipes de Saúde da Família no território brasileiro há disparidade na implantação da Estratégia Saúde da Família (ESF) em municípios de grande porte. Outras dificuldades enfrentadas referem-se aos recursos humanos em saúde (RHS). Nesse sentido, esta pesquisa objetivou analisar o cenário atual da gestão do trabalho na ESF nos municípios do Rio de Janeiro e Duque de Caxias. Metodologia: Estudo exploratório, de investigação narrativa, bibliográfica e documental, de abordagem qualitativa. A coleta de dados se deu em duas fases: pesquisa de material bibliográfico nas bases: LILACS, PAHO e WHOLIS, e de editais de processos seletivos e concursos públicos dos anos 2000, com vistas à contratação de profissionais de saúde para a ESF e; entrevistas semiestruturadas com gestores da ESF. O período de coleta perdurou entre agosto de 2010 e dezembro de 2011. Os documentos foram analisados à luz da estatística descritiva e as entrevistas submetidas à análise de conteúdo. Resultados: Escassez de literatura sobre a ESF nos municípios de Duque de Caxias e Rio de Janeiro. As contratações no Rio de Janeiro obedeceram a dois momentos: prefeitura e Organizações Sociais (OS) como contratantes. Em Duque de Caxias a contratação foi exclusividade da Prefeitura. No Rio de Janeiro os salários dos profissionais variaram entre R$ 728,59 (Agentes Comunitários de Saúde - ACS) e R$ 7.773,69 (médicos), contrastando com a isonomia salarial adotada em Duque de Caxias, com vencimentos ao redor de R$ 700,00 para os ACS, R$ 800,00 para nível técnico e; aproximadamente R$ 5.000,00 aos profissionais de nível superior. Os gestores sugerem que a maior rotatividade entre os médicos é motivada por carga horária excessiva; más condições de trabalho e, localização da unidade em áreas de risco social. As estratégias para atração e fixação profissional incluem: processos seletivos; garantia dos direitos trabalhistas e; abonos salariais, no caso do Rio de Janeiro e; flexibilização de carga horária, melhorias em infraestrutura e estratégias de qualificação, em Duque de Caxias. Entrevistas revelaram as maiores dificuldades na gestão da ESF: alta rotatividade, formação médica destoante com o SUS e, infraestrutura precária. Acrescenta-se o baixo salário para médicos em Duque de Caxias e, vínculos e salários distintos entre profissionais que exercem mesma função no Rio de Janeiro. Conclusões: A expansão da ESF nos grandes centros urbanos encontra obstáculos relacionados à gestão do trabalho que fragilizam sua consolidação. O Rio de Janeiro mostra-se mais atraente para os profissionais da ESF. O único diferencial de Duque de Caxias, sobretudo para odontólogos e enfermeiros, refere-se à contratação direta pela Prefeitura com vinculação estatutária, ainda que, eventual aumento salarial esteja atrelado ao de todos os servidores municipais. No Rio de Janeiro, a contratação sob regime da Consolidação das Leis do Trabalho revela-se uma proteção, posto que diante da possibilidade de perda de profissionais as OS elevam seus salários. Dentre as recomendações para fixação profissional incluem-se: incentivos salariais para atuação em regiões vulneráveis, melhorias em infraestrutura e, acoplação entre Instituições de Ensino Superior e rede de saúde.

O desenvolvimento da competência leitora do público infanto-juvenil: uma proposta de estudo de As aventuras do Capitão Cueca: um romance épico

Esta dissertação tem por objetivo o estudo da narrativa dedicada ao público infanto-juvenil através de seus sumários e das estratégias textuais e discursivas que levaram a coleção ao grande recorde de venda no período de 2007. Trata-se de uma narrativa, de autoria a Dav Pilkey, intitulada As Aventuras do Capitão Cueca. Fazem parte deste corpus os quatro volumes iniciais da coleção e seus respectivos sumários analisados dentro da teoria laboviana sobre as narrativas. O estudo proposto analisa o tipo de texto e que estruturas podem justificar o porquê de os volumes serem considerados um romance épico. Analisa-se, a importância das construções metafóricas e referenciais para a construção dos personagens e para a progressão textual. Postulam-se três tipos de metáforas - a do poder, a da ação e a da aventura, que, participam na superestrutura textual, construindo a história como um conjunto de elementos composto, tanto pelos referentes quanto pelas escolhas lexicais, já que, por meio do léxico, são delineadas as pistas necessárias à progressão textual o que, consequentemente, propicia um texto com articulação e suspense, o que torna a leitura mais próxima do público que a coleção deseja atingir. Mostrou-se necessário, também, um estudo mais acurado do gênero e da tipologia textual, visto que, nesse momento, nos utilizamos da própria denominação do subtítulo da coleção: romance épico. A organização da microestrutura do texto na perspectiva da relação metáfora e referentes permitiu o reconhecimento de uma tríade na organização da macroestrutura da narrativa, justificando a referência à narrativa épica e às peripécias vividas pelos personagens. É essa complexidade textual que torna a coleção tão singular e atrativa aos olhos do público a que se destina, confirmando a essência do processo de interação entre texto/ leitor/ produtor, em um processo dialógico. Embasam esse estudo as teorias sócio-cognitivas de Lakoff e Johnson (2002) e Sardinha (2007), Koch (2002), Cavalcante (2011), Marcuschi (2008). Concluí-se que a arquitetura do texto pode, de fato, interferir no processo de desenvolvimento da competência de leitura dos estudantes, prendendo seu interesse, o que faz com que haja uma construção de interação. Essa possibilidade, por analogia, pode ser, de um lado, um ponto de desvendamento para o sucesso de alguns livros publicados e que se tornam absoluto sucesso em um dado tempo entre os jovens; de outro lado, pode colocar o professor e a escola do século XXI à frente de novos desafios não só no que tange ao desenvolvimento das diferentes habilidades de leitura, mas também frente ao que é importante do ponto de vista discursivo para o incentivo à leitura, em um mundo marcado semioticamente pela imagem

Broadband amplification and upconversion luminescence properties of Er3+/Yb3+ co-doped fluorophosphate glass

Broadband and upconversion properties were studied in Er3+/Yb3+ co-doped fluorophosphate glasses. Large Omega(6) and S-ed/(S-ed + S-md) values and the flat gain profile over 1530-1585 nm indicate the good broadband properties of the glass system. And a premise of using Omega(6) as a parameter to estimate the broadband properties of the glasses is proposed for the first time to our knowledge. Results showed that fluorescence intensity, upconversion luminescence intensity, the intensity ratio of red/green light (656 nm/545 nm) are closely related to the Yb3+:Er3+ ratio and Er3+ concentration, and the corresponding calculated lifetime of F-4(9/2) and S-4(3/2) states for red and green upconversion samples proves this conclusion. The upconversion mechanism is also discussed. (c) 2005 Elsevier Ltd. All rights reserved.