Influência de protocolos de jateamento na rugosidade da superfície de uma cerâmica de zircônia tetragonal parcialmente estabilizada por ítria

Objective: To evaluate the influence of different air abrasion protocols on the surface roughness of an yttria-stabilized polycrystalline tetragonal zirconia) (Y-TZP) ceramic, as well as the surface topography of the ceramic after the treatment. Method: Fifty-four specimens (7.5×4×7.5mm) obtained from two ceramic blocks (LAVA, 3M ESPE) were flattened with fine-grit sandpaper and subjected to sintering in the ceramic system's specific firing oven. Next, the specimens were embedded in acrylic resin and the surfaces to be treated were polished in a polishing machine using sandpapers of decreasing abrasion (600- to 1,200-grit) followed by felt discs with 10μm and 3μm polishing pastes and colloidal silica. The specimens were then randomly assigned to 9 groups, according to factors particle and pressure(n=6): Gr1- control; Gr2- Al 2O 3(50μm)/2.5 bar; Gr3- Al 2O 3(110μm)/2.5 bar; Gr4- SiO 2(30μm)/2.5 bar; Gr5- SiO 2(30μm)/2.5 bar; Gr6- Al 2O 3(50μm)/3.5 bar; Gr7- Al2O3(110μm)/3.5 bar; Gr8- SiO 2(30μm)/3.5 bar; Gr9- SiO 2(30μm)/3.5 bar. After treatments, surface roughness was analyzed by a digital optical profilometer and the morphology was examined by scanning electron microscopy (SEM). Data (μm) were subjected to statistical analysis by Dunnett's test (5%), two-way ANOVA and Tukey's test (5%). Results: The type of particle (p=0.0001) and the pressure (p=0.0001) used in the air abrasion protocols influenced the surface roughness values among the experimental groups (ANOVA). The mean surface roughness values (μm) obtained for the experimental groups (Gr2 to Gr9) were, respectively: 0.37 D; 0.56 BC; 0.46 BC; 0.48 CD; 0.59 BC; 0.82 A; 0.53B CD; 0.67 AB. The SEM analysis revealed that Al 2O 3, regardless of the particle size and pressure used, caused damage to the surface of the specimens, as it produced superficial damages on the ceramic, in the form of grooves and cracks. Conclusion: Al2O3 (110 μm/3.5 bar) air abrasion promoted the highest surface roughness on the ceramics, but it does not mean that this protocol promotes better ceramic-cement union compared to the other air abrasion protocols.

Caracterização analítica de sucos e néctares de laranja adoçados com sacarose e edulcorantes

Objective: To characterize physically and chemically, non-sweetened orange juices and orange nectars sweetened with sucrose or sweet flavoring agents, with respect to their pH, titratable acidity (TA) and total soluble solids content (TSSC), as well as to evaluate the correlation of the latter property with the others. Method: Aliquots of three lots of two orange juices and two orange nectars containing sucrose and two containing sweet flavoring agents were evaluated. Mineral water was used as a control. The TSSC was determined using an Abbe refractometer. The pH was recorded using a digital pH meter, while TA was quantified by titrating samples of the beverages with 0.1 M NaOH until reaching pHs 5.5 and 7.0. Data were subjected to Pearson's correlation test, regression analysis, analysis of variance and Tukey's test (α=0.05). Results: TSSC values presented a strong correlation with TA, and these properties exhibited a quadratic relationship. Although the pH values were not dependent on the presence of sucrose or sweet flavoring agents, a significantly greater amount of base was necessary to reach pHs 5.5 and 7.0 in the beverages without sucrose or flavoring agents. Conclusion: Orange juices and nectars presented similar pH values, which was not associated with the presence of sucrose or sweet flavoring agents in the beverages. Higher TA values were obtained for the juice and lower for the nectars, regardless of containing sucrose or sweet flavoring agents. The increase of TSSC did not implicate in decrease of TA in the beverages.

Avaliação de usuários da atenção básica sobre a implantação de protocolo de assistência integral odontológica

Objective: To evaluate the perception of basic attention healthcare users as to the implantation of the Integral Dental Assistance Protocol (PAIO, in Portuguese) and the effect of this program on the oral health condition, oral hygiene, access to and resolubility of the service, in a public basic health unit of João Pessoa-PB. Method: The sample was composed of 32 volunteers, for whom a sixphase intervention was programed: diagnosis of dental needs; resolution of urgencies; restorative interventions; application of promotional measures; evaluation of the health level obtained; and periodic follow-up visits. Data were collected by means of a semistructured interview and a questionnaire, applied before and after PAIO implantation. The interviews were transcribed and analyzed according to the content analysis technique. The effect of PAIO implantation was evaluated by using an increasing scoring system ranging from 1 to 10. The Wilcoxon test was applied with a confidence level of 95%. Results: For the participants that attended the PAIO (n=20), the program contributed to improve oral health condition (100%) and knowledge (100%). The users reported satisfaction (n=12) and had a positive evaluation (n=12), achieved by means of the improvement of oral health condition (n=8), faster and easier access to treatment (n=7), scheduling of dental appoints and warrant of being treated (n=6), welcoming (n=5), motivation for oral care (n=5), and perspective of continuity of PAIO (n=6). The initial evaluation of the users received scores between 5.7 and 7.6. After PAIO implantation, the users' perception was improved (p<0.01), with scores between 9.6 and 9.9. Conclusion: According to the users, the implantation of PAIO contributed to the qualification of health service and oral health care, being a favorable aspect to increase the access to and resolubility of the service.

Fatores de risco de desordens osteomusculares presentes no posto de trabalho de estudantes de odontologia

Objective: To identify the perception of undergraduate dental students with respect of the risk factors present at the study/work place that could contribute to the development of musculoskeletal disorders. Method: A total of 348 undergraduate dental students from Araraquara Dental School - UNESP were evaluated. The Portuguese version of the Work-related activities that may contribute to job-related pain and/or injury questionnaire was used. Data were analyzed by descriptive statistics. Results: The mean perception of the undergraduates was 5.68 (SD=1.92). The factors with highest mean values were continue working with some kind of pain or lesion (7.49, SD=2.55), bending or twisting the back in an uncomfortable manner (7.39, SD=2.59), working in uncomfortable/inadequate positions (7.27. SD=2.60) and working in the same position for long periods (7.02. SD=2.53). Overall, female students presented higher mean scores of perception than male students. The body parts with highest prevalence of pain were the neck (67.0%) and lower back (65.8%). Conclusion: The students showed perception in relation to the risk factors for musculoskeletal disorders present at the study/work place.

Desmame precoce: Falta de conhecimento ou de acompanhamento?

Objective: To assess the knowledge of women and the instructions received on breastfeeding during pregnancy and after childbirth, and their influence on breastfeeding practice. Method: This study was a longitudinal investigation following 84 pairs of mothers and babies from pregnancy through the sixth month of baby's life. In the first phase of the research, interviews were made with the pregnant women at home and at Basic Health Units to collect information about their intentions and knowledge of breastfeeding. In the second phase of the research, mothers and babies were followed up from the first to sixth month of baby's life to record the difficulties of breastfeeding and reasons for weaning. Results: In the first month, 94.3% (82) of the babies were breastfed, but only 49.4% (43) were breastfed exclusively. At the end of the sixth month of life, 43.7% (38) of the babies had already been weaned. No mother breastfed exclusively her baby within the sixth month. During pregnancy, 60.7% (51) of the mothers had no instructions about breastfeeding and 83.4% (70) of the mothers received instructions on breastfeeding after childbirth. Most mothers (76.2%) knew about the ideal breastfeeding period. Seventy-three (86.9%) mothers believed that breastfeeding was beneficial for the baby, but only 41 (48.8%) of them really breastfed. Only 11 (13.1%) mothers were followed up by the public health system team during lactation. Conclusion: Although most women had been instructed during pregnancy or after childbirth and had knowledge of breastfeeding, early weaning occurred. Advising is important, but the support and follow up of the mothers are of utmost importance for a successful breastfeeding practice.

Avaliação da liberação de íon fluoreto de cimentos ionoméricos antes e após a recarga e com proteção da superfície

Objective: To evaluate fluoride ion release from two anhydrous glass ionomer cements (GICs) and two resin-modified GICs (RMGICs) before and after recharge with 2% neutral sodium fluoride for 4 min and after surface protection of the Maxxion R GIC with an adhesive system, a cavity varnish and a colorless nail polish. Method: A stainless steel 2x6 mm matrix was used for fabricating 5 specimens of each material, which were immersed in 5 mL of deionized water, renewed every 24 h. Measurements with a potentiometer were performed on days 1, 2, 9 and 17, in the 1st and 2nd phases, and the specimens were buffered with a TISAB III solution. In the 2nd phase, the specimens were subjected to recharge and immersed again in 5 mL of deionized water. In the 3rd phase, the GIC surfaces were protected and readings were made at 5 min, 24 h, 48 h and 72 h. Tukey's post-hoc and Student's t tests were used for statistical analyses (p<0.05). Results: There was statistically significant difference in the comparison between the 1st and 2nd phases for all materials, except at day 2 for Vidrion R and VitroFil LC. In the 3rd phase, it was observed that for all materials, comparison of the first 5 min with the other times revealed statistically significant differences among the means of fluoride ion release. In the comparison with the other times, both the varnish and the colorless nail polish presented statistically significant difference between 24 and 48 h as well as between 24 and 72 h. Conclusion: The anhydrous GICs were more effective in fluoride ion release and recharge compared with the RMGICs. Maxxion R presented a homogeneous and statistically significant behavior in both phases. All materials for surface protection were efficient and the colorless nail polish had the best behavior.

Associação de enterococcus faecalis, candida albicans e escherichia coli em canais radiculares e avaliação dos efeitos de extratos naturais sobre os microrganismos e endotoxinas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de propriedades físicas e químicas de um novo cimento selador endodôntico

Pós-graduação em Ciência dos Materiais - FEIS

Citotoxicidade e genotoxicidade de cimentos endodônticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Detecção e ação antimicrobiana e antiendotóxica do extrato glicólico de gengibre utilizado como substância química auxiliar durante o retratamento endodôntico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Detecção da microbiota endodôntica de dentes sem vitalidade pulpar com ou sem lesão periapical radiográfica, por meio das técnicas de checkerboard DNA-DNA hybridization e cultura microbiológica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise do pH, da liberação de íons cálcio e da capacidade seladora de cimentos contendo hidróxido de cálcio e MTA utilizados em obturação retrógrada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Sistema adesivo na obturação de canais radiculares: biocompatibilidade e infiltração coronária (reparação apical e periapical em dentes de cães)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito da laserterapia na viabilidade de macrófagos e sua produção de óxido nítrico frente a cimentos endodônticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Citotoxicidade e ação antimicrobiana do cimento Portland associado a diferentes agentes radiopacificadores

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)