Valley evolution by meandering rivers

Fluvial systems form landscapes and sedimentary deposits with a rich hierarchy of structures that extend from grain- to valley scale. Large-scale pattern formation in fluvial systems is commonly attributed to forcing by external factors, including climate change, tectonic uplift, and sea-level change. Yet over geologic timescales, rivers may also develop large-scale erosional and depositional patterns that do not bear on environmental history. This dissertation uses a combination of numerical modeling and topographic analysis to identify and quantify patterns in river valleys that form as a consequence of river meandering alone, under constant external forcing. Chapter 2 identifies a numerical artifact in existing, grid-based models that represent the co-evolution of river channel migration and bank strength over geologic timescales. A new, vector-based technique for bank-material tracking is shown to improve predictions for the evolution of meander belts, floodplains, sedimentary deposits formed by aggrading channels, and bedrock river valleys, particularly when spatial contrasts in bank strength are strong. Chapters 3 and 4 apply this numerical technique to establishing valley topography formed by a vertically incising, meandering river subject to constant external forcing—which should serve as the null hypothesis for valley evolution. In Chapter 3, this scenario is shown to explain a variety of common bedrock river valley types and smaller-scale features within them—including entrenched channels, long-wavelength, arcuate scars in valley walls, and bedrock-cored river terraces. Chapter 4 describes the age and geometric statistics of river terraces formed by meandering with constant external forcing, and compares them to terraces in natural river valleys. The frequency of intrinsic terrace formation by meandering is shown to reflect a characteristic relief-generation timescale, and terrace length is identified as a key criterion for distinguishing these terraces from terraces formed by externally forced pulses of vertical incision. In a separate study, Chapter 5 utilizes image and topographic data from the Mars Reconnaissance Orbiter to quantitatively identify spatial structures in the polar layered deposits of Mars, and identifies sequences of beds, consistently 1-2 meters thick, that have accumulated hundreds of kilometers apart in the north polar layered deposits.

Levantamento e estudo das ocorrências de grafita do Distrito Grafitífero Aracoiába-Baturité, CE

O Distrito Grafitífero Aracoiába-Baturité apresenta depósitos do tipo gnaisse grafitoso (minério disseminado) e veio (minério maciço) com diferentes origens genéticas e com características físicas e ambientes geológicos de formação próprios. O minério tipo gnaisse grafitoso é de origem sedimentar, singenético, com teores de 1,5 a 8% de C, que se distribuem ao longo de duas extensas faixas paralelas, hospedadas na Subunidade Baturité, que constitui um importante metalotecto regional. A associação de grafita metamórfica disseminada em metassedimentos da Sequência Acarápe constitui um geoindicador de antiga bacia sedimentar neoproterozóica e, também, pode ser considerado como zona de geosutura resultante do subsequente fechamento de um oceano primitivo. As rochas desta subunidade correspondem na paleogeografia da Sequência Acarápe aos fácies de sopé de talude e de planície abissal. O minério tipo veio (fluido depositado) é epigenético e, com teores entre 20% e 70% de C, forma corpos tabulares e bolsões, controlados em escala local por estruturas de alívio (falhas, fraturas, zonas de contato, eixos de dobras etc.) que permitiram a percolação de soluções penumatolíticas relacionadas ao corpo plutônico de Pedra Aguda. As variações dos valores das relações entre isótopos estáveis de carbono (δ13C) na grafita do minério disseminado são de -26,72 a -23,52 e do minério maciço de -27,03 a -20,83, revelando sinal de atividades biológicas (bioassinaturas) e permitem afirmar que a grafita das amostras acima são derivadas de matéria orgânica. Foram apresentados os principais guias de prospecção para grafita e testados os seguintes métodos geofísicos: Eletro-Resistividade; GPR - Ground Penetrating Radar; Magnetometria; VLF (Very Low Frequency); e Polarização Induzida Espectral (IPS) / Resistividade (ER). A conjugação dos métodos de Polarização Induzida Espectral (IPS) e Eletro Resistividade (ER) foi o que demonstrou a melhor eficiência. Com relação à determinação do teor de carbono por termogravimetria (ATG), que é o método mais utilizado para este elemento. Verificou-se, que as faixas de queima atribuídas ao carbono no minério do Distrito de Aracoiába-Baturité (340 a 570C e de 570 a 1050C) eram diferentes das faixas do minério de Minas Gerais (350C a 650C e 650C a 1.050C). Esta constatação indica a necessidade de se determinar previamente as faixas de temperatura para cada região pesquisada.

Metallogenic Provinces of the Southwestern United States and Northern Mexico

Some of the metallogenic provinces of the southwestern United States and northern Mexico are defined by the geographic distribution of trace elements in the primary sulfide minerals chalcopyrite and sphalerite. The elements investigated include antimony, arsenic, bismuth, cadmium, cobalt, gallium, germanium, indium, manganese, molybdenum, nickel, silver, tellurium, thallium, and tin. Of these elements, cobalt, gallium, germanium, indium, nickel, silver, and tin exhibit the best defined geographic distribution.

The data indicate that chalcopyrite is the preferred host for tin and perhaps molybdenum; sphalerite is the preferred host for cadmium, gallium, germanium, indium, and manganese; galena is the preferred host for antimony, bismuth, silver, tellurium, and thallium; and pyrite is the preferred host for cobalt, nickel, and perhaps arsenic. With respect to the two minerals chalcopyrite and sphalerite, antimony, arsenic, molybdenum, nickel, silver, and tin prefer chalcopyrite; and bismuth, cadmium, cobalt, gallium, germanium, indium, manganese, and thallium prefer sphalerite. This distribution probably is the result of the interaction of several factors, among which are these: the various radii of the elements, the association due to chemical similarities of the major and trace elements, and the degree of ionic versus covalent and metallic character of the metal-sulfur bonds in chalcopyrite and sphalerite. The type of deposit, according to a temperature classification, appears to be of minor importance in determining the trace element content of chalcopyrite and sphalerite.

A preliminary investigation of large single crystals of sphalerite and chalcopyrite indicates that the distribution within a single crystal of some elements such as cadmium in sphalerite and indium and silver in chalcopyrite is relatively uniform, whereas the distribution of some other elements such as cobalt and manganese in sphalerite is somewhat less uniform and the distribution of tin in sphalerite is extremely erratic. The variations in trace element content probably are due largely to variations in the composition of the fluids during the growth of the crystals, but the erratic behavior of tin in sphalerite perhaps is related to the presence of numerous cavities and inclusions in the crystal studied.

Maps of the geographic distribution of trace elements in chalcopyrite and sphalerite exhibit three main belts of greater than average trace element content, which are called the Eastern, Central, and Western belts. These belts are consistent in trend and position with a beltlike distribution of copper, gold, lead, zinc, silver, and tungsten deposits and with most of the major tectonic features. However, there appear to be no definite time relationships, for as many as four metallogenic epochs, from Precambrian to late Tertiary, are represented by ore deposits within the Central belt.

The evidence suggests that the beltlike features have a deep seated origin, perhaps in the sub-crust or outer parts of the mantle, and that the deposits within each belt might be genetically related through a beltlike compositional heterogeneity in the source regions of the ores. Hence, the belts are regarded as metallogenic provinces.

Prospecção geoquímica: estaurolita, ilmenita e magnetita como minerais traçadores para depósitos do tipo VMS

A região de Itutinga foi alvo de estudos prospectivos por parte da empresa BP mineração na década de 80, onde foram encontradas mineralizações em lentes de sulfetos metálicos (Zn-Cu-Ag-Fe) associados a rochas komatiíticas peridotíticas e basaltos toleíticos (anfibolitos) do greenstone belts, nas proximidades da fazenda São Jerônimo, enquadrando-se em um depósito do tipo VMS. A partir destas informações encontradas na literatura propôs-se estudar a estaurolita, a magnetita e a ilmenita para, a partir da determinação do seu conteúdo em zinco, indicar a aplicabilidade destes três minerais como traçadores desses tipos de depósitos. Para isso foram coletadas amostras de sedimentos de corrente e concentrados de batéia na região próxima à ocorrência, no entorno da cidade de Itutinga, e também em uma região próxima a cidade de Itumirim, já que existem semelhanças litológicas entre as duas áreas. Os sedimentos de corrente, as frações magnéticas e as frações de 0,3A (separador eletromagnético Frantz) foram enviados para análises químicas por absorção atômica e ICP-OES. Os concentrados de batéia foram descritos, separando-se cristais de estaurolita de cada amostra coletada, e analisando-os em MEV-EDS para determinação da química mineral. Os resultados dos sedimentos de corrente apontaram que os pontos da fazenda São Jerônimo (ME-03, Itutinga 51,7 ppm de Zn) e o ponto do Ribeirão Santa Cruz, (ME-06, Itumirim 36,1 ppm de Zn) foram os que apresentaram melhores resultados, indicando anomalias em zinco nas duas áreas estudadas . As estaurolitas, retiradas dos concentrados de batéia de cada ponto estudado, foram divididas em três conjuntos, de acordo com os teores de ZnO encontrados: 1 - entre 2,96% e 3,25% de ZnO em peso; 2 - entre 2,03% e 2,76% de ZnO em peso; 3 - < 1,67% de ZnO em peso, sendo comparável com outras estaurolitas encontradas em diversos depósitos de Zn do mundo, como Dry River, Austrália e Palmeirópolis Goiás. Assim, as estaurolitas apresentam bons resultados como minerais indicadores na área estudada. Em relação as magnetitas e ilmenitas estudadas, o número de amostras coletadas no presente estudo foram muito pequenas para se ter informações conclusivas sobre o papel destes minerais como traçadores. Por outro lado, os resultados das análises químicas nos concentrados de ilmenita (até 856 ppm de Zn) e nos concentrados de magnetita (até 216 ppm de Zn), indicam a disponibilidade deste metal nas áreas estudadas. Assim, é possível se detectar a presença do zinco por dois meios: através de sedimentos de corrente, através de halos de dispersão química do elemento zinco, e através dos minerais resistatos (estaurolita zincífera, magnetita e ilmenita), a partir de uma dispersão clástica do grão.

Caracterização do maciço Santa Clara no município de Cujubim (RO) com base em litogeoquímica, geocronologia e estudos isotópicos

A Suíte Intrusiva Santa Clara está inserida na Província Estanífera de Rondônia, na porção SW do Cráton Amazônico. Essa suíte intrusiva é composta pelos maciços Santa Clara, Oriente Velho, Oriente Novo, Manteiga-Sul, Manteiga-Norte, Jararaca, Carmelo, Primavera e das Antas. Os litotipos que perfazem a Suíte Santa Clara ocorrem hospedados nas rochas do Complexo Jamari, uma associação polideformada composta por gnaisses ortoderivados e paraderivados. Características observadas em campo e em análises petrográficas permitiram subdividir o Maciço Santa Clara em cinco fácies distintas: fácies porfirítica, fácies isotrópica, fácies fina, fácies piterlítica e fácies viborgítica. Os litotipos observados correspondem a hornblenda-biotita granitos e biotita granitos intermediários a ácidos, com composições médias semelhantes àquelas verificadas para sienogranitos e monzogranitos. Geoquimicamente, três magmas podem ser identificados. O magma menos evoluído corresponde às rochas das fácies porfirítica e equigranular, e o mais evoluído compreende as fácies de granulometria fina e piterlítica. A fácies viborgítica representa o terceiro líquido magmático, e aparentemente é diferente de todas as outras fácies em termos de aspectos de campo e geoquímica. A análise litogeoquímica indica que estes granitoides são subalcalinos, bastante empobrecidos em MgO e exibem caráter metaluminoso a fracamente peraluminoso. Os padrões de elementos-traços evidenciam que tais granitóides possuem alto conteúdo em elementos incompatíveis (Rb, Zr, Y, Ta, Ce) e ETR, com exceção do Eu. Além disso, também exibem leve enriquecimento em LILE, forte depleção em elementos como Sr e Ti, e leve empobrecimento de Ba, indicando que o fracionamento de minerais como plagioclásio e titanita foi importante na evolução do líquido magmático analisado. A anomalia negativa de Nb indica envolvimento de material crustal nos processos magmáticos que geraram estes granitoides. Os litotipos analisados possuem características típicas de granitos tipo-A ferroan, e as razões FeOt/MgO entre 4,27 e 26,22 sugerem tratar-se de uma série de granitos félsicos fracionados. Os padrões de ETR observados para os litotipos analisados exibem um considerável enriquecimento em ETRL, e anomalia negativa de Eu, sugerindo fracionamento de feldspato durante o processo de diferenciação do líquido magmático. Diagramas discriminantes de ambientes tectônicos sugerem que os litotipos do Maciço Intrusivo Santa Clara são típicos de ambiente intraplaca, do tipo-A2, isto é, associados a ambientes pós-colisionais/pós-orogênicos. As características isotópicas observadas para os granitoides do Maciço Santa Clara sugerem que os mesmos foram gerados a partir da fusão parcial de uma crosta inferior pré-existente. As idades U-Pb entre 1,07 e 1,06 Ga são compatíveis com um magmatismo ocorrido nos estágios finais da colagem do supercontinente Rodínia (1,2-1,0 Ga) e estágios finais do Ciclo Orogênico Sunsás-Aguapeí (1320-1100 Ma). Sugere-se ainda que na verdade o Maciço Santa Clara seja formado por uma coalescência das três intrusões graníticas que são representadas pelos três magmas anteriormente descritos.

Geocronologia U-Pb SHRIMP no Complexo Mantiqueira na região entre Juiz de Fora e Santos Dumont, sudeste de Minas Gerais

O Orógeno Ribeira representa um cinturão de dobramentos e empurrões, gerado no Neoproterozóico/Cambriano, durante a Orogênese Brasiliana, na borda sul/sudeste do Cráton do São Francisco e compreende quatro terrenos tectono-estratigráficos: 1) o Terreno Ocidental, interpretado como resultado do retrabalhamento do paleocontinente São Francisco, é constituído de duas escamas de empurrão de escala crustal (Domínios Andrelândia e Juiz de Fora); 2) o Terreno Oriental representa uma outra microplaca e abriga o Arco Magmático Rio Negro; 3) o Terreno Paraíba do Sul, que constitui-se na escama superior deste segmento da faixa; e 4) o Terreno Cabo Frio, cuja docagem foi tardia, ocupa pequena área no litoral norte do estado do Rio de Janeiro. Em todos os diferentes compartimentos do segmento central da Faixa Ribeira podem ser identificadas três unidades tectono-estratigráficas: 1) unidades pré-1,8 Ga. (ortognaisses e ortogranulitos do embasamento); 2) rochas metassedimentares pós-1,8 Ga; e 3) granitóides/charnockitóides brasilianos. O Complexo Mantiqueira é composto por ortognaisses migmatíticos, tonalíticos a graníticos, e anfibolitos associados, constitui o embasamento pré-1,8 Ga das rochas da Megasseqüência Andrelândia no domínio homônimo do Terreno Ocidental. Foram integrados 68 dados litogeoquímicos dentre ortognaisses e metabasitos do Complexo Mantiqueira. As rochas dessa unidade pertencem a duas séries distintas: série calcioalcalina (rochas intermediárias a ácidas); e série transicional (rochas básicas, ora de afinidade toleítica, ora alcalina). Com base em critérios petrológicos, análise quantitativa e em valores [La/Yb]N, verificou-se que o Complexo Mantiqueira é bastante heterogêneo, incluindo diversos grupos petrogeneticamente distintos. Dentre as rochas da série transicional, foram identificados 2 conjuntos: 1) rochas basálticas toleiíticas, com [La/Yb]N entre 2,13 e 4,72 (fontes do tipo E-MORB e/ou intraplaca);e 2) rochas basálticas de afinidade alcalina, com [La/Yb]N entre 11,79 e 22,78. As rochas da série calciolacalina foram agrupadas em cinco diferentes conjuntos: 1) ortognaisses migmatíticos quartzo dioríticos a tonalíticos, com [La/Yb]N entre 11,37 e 38,26; 2) ortognaisses bandados de composição quarzto diorítica a granodiorítica, com [La/Yb]N entre 4,35 e 9,28; 3) ortognaisses homogênos de composição tonalítica a granítica, com [La/Yb]N entre 16,57 e 38,59; 4) leucognaisses brancos de composição tonalítica/trondhjemítica a granítica, com [La/Yb]N entre 46,69 e 65,06; e 5) ortognaisse róseo porfiroclástico de composição tonalítica a granítica, com [La/Yb]N entre 82,70 e 171,36. As análises geocronológicas U-Pb SHRIMP foram realizadas no Research School of Earth Science (ANU/Canberra/Austrália). Foram obtidas idades paleoproterozóicas para as rochas das duas séries identificadas, interpretadas como a idade de cristalização dos protólitos magmáticos desses gnaisses e metabasitos. Os resultados obtidos mostram uma variação de idades de cristalização de 2139 35 a 2143,4 9,4, para as rochas da série transicional, e de 2126,4 8 a 2204,5 6,7, para aquelas da série calcioalcalina. Dentre todas as amostras estudadas, apenas a amostra JF-CM-516IV forneceu dados discordantes de idades arqueanas (292916 Ma), interpretados como dados de herança. Contudo, evidências dessa herança semelhantes a esta são observadas em outras amostras. Ambas as séries também apresentaram idades de metamorfismo neoproterozóico, no intervalo de 548 17 Ma a 590,5 7,7 Ma que é consistente com o metamorfismo M1 (entre 550 e 590 Ma), contemporâneo à colisão entre os Terrenos Ocidental e Oriental do setor central da Faixa Ribeira (Heilbron, 1993 e Heilbron et al., 1995).

Evolution of the tectogene concept, 1930-1965

The tectogene, or crustal downbuckle, was proposed in the early 1930s by F.A. Vening Meinesz to explain the unexpected belts of negative gravity anomalies in island arcs. He attributed the isostatic imbalance to a deep sialic root resulting from the action of subcrustal convection currents. Vening Meinesz's model was initially corroborated experimentally by P.H. Kuenen, but additional experiments by D.T. Griggs and geological analysis by H.H. Hess in the late 1930s led to substantial revision in detail. As modified, the tectogene provided a plausible model for the evolution of island arcs into alpine mountain belts for another two decades. Additional revisions became necessary in the early 1950s to accommodate the unexpected absence of sialic crust in the Caribbean and the marginal seas of the western Pacific. By 1960 the cherished analogy between island arcs and alpine mountain belts had collapsed under the weight of the detailed field investigations by Hess and his students in the Caribbean region. Hess then incorporated a highly modified form of the tectogene into his sea-floor spreading hypothesis. Ironically, this final incarnation of the concept preserved some of the weaker aspects of the 1930s original, such as the ad hoc explanation for the regular geometry of island arcs.

A modular planar robotic manipulandum with end-point torque control.

Robotic manipulanda are extensively used in investigation of the motor control of human arm movements. They permit the application of translational forces to the arm based on its state and can be used to probe issues ranging from mechanisms of neural control to biomechanics. However, most current designs are optimized for studying either motor learning or stiffness. Even fewer include end-point torque control which is important for the simulation of objects and the study of tool use. Here we describe a modular, general purpose, two-dimensional planar manipulandum (vBOT) primarily optimized for dynamic learning paradigms. It employs a carbon fibre arm arranged as a parallelogram which is driven by motors via timing pulleys. The design minimizes the intrinsic dynamics of the manipulandum without active compensation. A novel variant of the design (WristBOT) can apply torques at the handle using an add-on cable drive mechanism. In a second variant (StiffBOT) a more rigid arm can be substituted and zero backlash belts can be used, making the StiffBOT more suitable for the study of stiffness. The three variants can be used with custom built display rigs, mounting, and air tables. We investigated the performance of the vBOT and its variants in terms of effective end-point mass, viscosity and stiffness. Finally we present an object manipulation task using the WristBOT. This demonstrates that subjects can perceive the orientation of the principal axis of an object based on haptic feedback arising from its rotational dynamics.

青藏高原东部混农季节性放牧及其对高山林线格局的影响

混农季节性放牧（agropastoral transhumance）通过作物种植和畜牧生产相结合的方式对不同海拔高度带上的资源进行相互补充利用，在亚洲兴都库什地区、青藏高原、横断山、东部及南部非洲、南美安第斯地区等具有悠久的历史。这种传统的生计系统几千年以来一直是居住在该地区的人类社会和自然生态系统相互作用的主要形式之一。这种传统的资源利用方式与山地自然植被以及特殊的山地人类文化和社会特征具有密切的协同演变关系。认识和理解这一关系，是山地生态学和人类学的核心科学问题之一。近年来，山地生态系统的多重功能性及动态演变对山区社会经济可持续发展的重要意义受到人们的不断关注。本文通过对云南省德钦县的12个自然村的混农季节性放牧以及对云南德钦、四川壤塘等山地植被格局特别是高海拔地带植被格局的的详细调查，探讨青藏高原东缘地区混农季节性放牧的主要特征、系统构成及相互关系，及其在全球变化、经济全球化和市场化及现代化过程中的变化趋势，分析混农季节性放牧与高山林线格局及生态系统的互动关系，旨在探讨山地地区人类活动与自然生态系统之间的互动关系，从而为山区社会经济可持续发展、环境建设和生物多样性保护等国家战略提供理论依据。 调查结果表明，混农季节性放牧是一种适应青藏高原东部高山峡谷地区环境因子及自然资源呈明显的垂直分布、资源数量稀少而时空分布异质性极高的生存环境的一种传统经济形式。这种传统的畜牧业的主要生产目的仍然是提供当地基本生存所需的产品，饲养牲口的种类和数量取决于农户的当地需求并且受资源的限制，因而维持在比较低的水平的。分布在不同海拔高度的放牧资源在一年中被牲口利用的时间也不同，互为补充，共同构成混农季节性放牧的资源基础。根据各社区永久居住点的位置和该村的土地资源特别是牧草地资源的分布范围，牲口迁移的距离和格局有较大的差异。。天然牧场仍然是最主要的畜牧业生产资源。混农季节性放牧中的农业系统和牧业系统互为补充，共同构成调查地区完整的的生计系统，农耕活动为放牧活动提供精饲料如粮食等和冬季饲料如秸秆， 其数量往往成为家庭畜牧业生产规模的主要决定因子之一。 通过对牲口数量和结构、牲口的时空迁移格局、牧业活动在整个经济活动中的相对重要性以及牧业活动和作物种植的关系方面的研究分析，混农季节性放牧在近几十年发生了深刻的变化。主要表现在牲口数量总体下降，牲口组成发生变化，牲口移动性降低、牧业活动的经济重要性下降以及牧业活动和种植活动之间的相互依存度降低等。上述变化的根本驱动力是发生在当地、地区及全球尺度上的环境、政治、社会经济、技术和文化等的变化，从而造成当地群众畜牧生产目标、土地利用和劳动力的分布等发生了变化。当地生计系统发生的改变可能会带来对方面而深刻的政治、社会经济、文化和生态影响。 混农季节性放牧这种古老的传统生计策略面临着许多挑战，如冬季饲料短缺、草场退化、缺乏市场竞争力、经济重要性降低、对年轻人缺乏吸引力、国家缺乏专门的政策指导等。与此同时，经济全球化、市场经济、新技术的应用、替代生计机会的增加、国家对于山地生态系统的作用的重新定位等也为传统生计系统转型、实现社会与生态共赢创造了机遇。 混农季节性放牧活动对亚高山及树线交错带生态系统系统的互动方式主要体现在以下几个方面：（1）牲口啃食、践踏等影响森林群落更新，改变森林群落的组成和结构，从而影响森林群落的演替进程和植被格局。林线边缘是搭建夏棚的首选地点，因此林线及树线交错地带就成了牲口活动的主要场所之一；（2）利用火烧开辟、维持和改良高山牧场； 3）在亚高山火灾迹地的放牧活动能够阻止火烧迹地的顺向演替； 4）牧民在林线附近获取建材和薪材等活动影响高山林线附近森林的结构和功能。 在调查区域，梅里雪山、白马雪山、甲午雪山的林线海拔高度在4200-4300m之间； 四川雅江、理塘一线，林线位置多在4300-4400m；四川壤塘二林场一带的林线主体在4100-4200m，在个别地区达到4300m； 在贡嘎山的南坡和东坡一带，林线位置在3600-3700m；而在四川松潘一带，林线位置主体在3700-3800米左右。树线高度的分布趋势和林线一致。混农季节性放牧及其有关人类利用活动使研究地区很多地方高山林线降低、树线交错带宽变窄或消失。在研究地区，总体情况是，阳坡和半阳坡（南坡、西南坡等）的林线和树线比阴坡和半阴坡（北坡、东北坡等）低，变化幅度达20-200m。这种差异主要是为了开辟牧场而人为清除了南向坡自然林线及其以上的植被从而使林线位置下降所致。在南坡自然林线保留得比较好的地方，林线和树线依然可以达到甚至超过北坡林线和树线的高度。放牧活动抑制了高山林线带火烧迹地的天然更新，从而使林线位置保持在目前的位置。 放牧活动对高山林线带森林群落更新的影响是显著的。自然林线内的乔木个体密度特别是新生苗和幼苗的密度大大高于非自然林线。没有放牧的自然林线及树线交错带内的I级个体（新生苗）密度达到725-2917株/公顷，而与之相对的处理样地内I级个体的密度只有0-228株/公顷；II级个体（高度10-50cm）也表现出类似的趋势，在没有放牧的自然林线及树线交错带样方内，其密度达到550-5208株/，而在放牧处理样方内只有14-321株/公顷。在非自然林线带样地内，在有正常放牧的样地内，完全缺乏I级个体。 从相对比例来看，没有放牧的样方内的I、II级个体在全部个体中所占的比例显著高于有放牧活动的样方。放牧使林线交错带的乔木幼苗数量显著减少，从而影响林线及树线交错带森林群落的天然更新过程。林线和树线交错带的灌木对乔木幼苗具有重要的保护作用，能够为树线树种如冷杉等幼苗的定居体提供有利的微气候环境，同时保护苗免受牲口的啃食和践踏。火烧以后接着进行放牧能够100%地抑制高山林线带的幼苗更新。 高山牧场放牧强度降低、使用时间缩短而低海拔地带放牧强度增加是研究地区混农季节性放牧系统的一个显著变化。这种变化也必然会引起各海拔带上的生态系统的变化。放牧强度的降低、生产性用火的停止将导致原来通过人工火烧而降低并通过进一步的火烧和放牧活动来维持的林线及其以上地带的灌木盖度和高度的增加，从而为林线森林群落的扩张创造条件。 青藏高原东部高山峡谷地区是我国重要的山地生态系统，在我国的生物多样性保护、生态环境建设、社会经济可持续发展战略中具有举足轻重的作用。正确认识人类特别是当地传统的生计系统与生态环境系统的互动关系是实现上述战略目标的前提。决策者必须以综合、系统的的视角协调促进社会经济可持续发展、保护生物及文化多样性和维持人、牲口和生态系统之间的平衡的多重目标。 Agropastoral transhumance, which makes a complementary exploitation of the natural resources at different altitudinal belts through a combination of migratory animal husbandry and crop cultivation, has a long history in Hindu-Kush Himalaya, Tibet Plateau, Hengduan Ranges, eastern and southern Africa and the Andes region of south America.For millennia, this traditional livelihood strategy has been one of the main forms of interaction between human societies inhabiting in these regions and their natural ecocystems. A close co-evolutionary relationship has been developed between this indigenous resources management systems and the mountain vegetation systems on the one hand and a unique set of cultural values and social features on the other. Understanding this relationship has been one of the core scientific issues in mountain ecology and anthropology. In recent years, the importance of the multiple functions of the mountain ecosystems and their dynamic changes in the sustainable socio-economic development of the mountain regions has gained increasing attention. This paper, which is based on a detailed study on the agropastoral practices of the 12 natural villages in Deqin County of Yunnan, and the mountainnn vegetation patterns in Deqin of Yunnan and Rangtang County of Sichuan, intends to reveal the major characteristics, system composition and the inter-relations of the subsystems of the agropastoral transhumance in Eastern Tibetan Plateau as well as the trends of changes of the system within the context of global changes, economic globalization and modernity process of China and analyze the relations between agropastoral transhumance and alpine ecosystem, ao as to understand the interactions between human activities and natural ecosystems of the mountains and provide theoretical basis for the national strategies in eocioeconomic development, environmental reconstruction and biodiversity conservation in the mountain regions. Results of the survey indicate that agropastoral transhumance in the investigated area is a traditional economic form that is highly adapted to the eastern Tibet Plateau where the topography features high peaks and deep gorges and where the highly variable environmental parameters and scanty natural resources exhibit a distinct vertical spectrum of distribution and great temporal and spatial heterogeneity. The main objective of pastoral management is still aimed at the production of basic goods and services of local people and thus the type and size of animals raised for each household mainly depend on local needs and are limited by the availability of natural resources. The scale of production is relatively low. Pastoral resources at different altidudinal belts are complementarily used at different seasons of a year and thus form the resources basis for agropastoral production of the study area. Migration distances and patterns vary with the location of the permanent settlements, the elevational distribution range of the resources of the villages concerned. Natural pastures (rangelands) are the main fodder resources and sumplement feedings only account for less than 5% of the total fodder consumption. Crop cultivation and pastoral activities support each other to form a complete livelihood system. The ability of the farmig lands (crop cultivation) to provide the pastoral activities with concentrates and sumplements often becomes a main factor limiting the scale of livestock production at household level. Agropastoral transhumance is experiencing drastic changes in recent decades as is reflected in the size and composition of animals, the seasonal migration pattern, the relative importance of pastoralism in the household economy and the interplays of agricultural and pastoral elements of the system. In general, there is a decline in animal population and mobility, a shift in animal composition to meet new needs arising from changed macro-economic situation, a decrease in the relative importance in the household economy and an increasing decoupling of agro&pastoral relations. The fundamental divers of these changes can be traced to environmental, social, economic, technological and cultural changes from local to global levels and such changes have further caused local changes in livestock management objectives, land use and distribution of labor forces. Changes in local livelihood systems could have profound political, socioeconomic, cultural and ecological conseuquences. Agropastoral transhumance, as an age-old traditional livelihood strategy, is facing multifacet challenges, such as winter fodder shortage, rangeland degradation, lack of market competitiveness, decrease in economic importance, lack of appreciation among the young generation and adequate policies from the government. At the same time, economic globalization, market economy, intrdoctution of new technologies, increase of alternative income generating opportunities and the national re-oreitation of policies on mountain ecosystems have all brought about new opportunities for the transformation of the traditional livelihood system and the synchronized development of local society and the environment. Agropastoral transhumance interacts with the ecosystems at the timberline and treeline ecotone mainly through the following aspects: 1)Animal browsing and stamping affect the regeneration process of the forest communities and alters the composition and structure of the forest which in turn affect the succession process and vegetation pattern of the forest communities. Forest edges are the priority locations for summer houses and therefore the timeline and treeline area becomes the major venues of aninal activities; （2）herders create, maintain and improve pastures through burning that remove the forest communities at the timeline and treeline ecotone; 3）immediate grazing on the fire sites can significantly prevent the fire sites from perogressive succession; and 4）herders harvesting of construction timber and firewoods affects the structure and functions of the forest communities at the timberline and treeline zone. Timberline position in the survey region shows geographical variations. It is around 4200-4300m in Meilixueshan, Baimaxueshan and Jiawuxueshan in Northwest of Yunnan and rises to 4300-4400m in Yajiang County and Litang County of Sichuan. In Rangtang of Sichuan, it is between 4100-4200m, though reaching 4300m in localized sites. In the southern and eastern slopes of Gongga Mountain, the timberline is only between 3600m and 3700m and in Songpan County at the upper reach of the Minjiang River the timberline is around 3700-3800m.Treeline pattern follows similar trend. In many places, agropastoral transhumance and related human activities have lowered the timberline and treeline and narrowed or removed the treeline ecotone. In the area of survey, generally speaking, timberlines and treelines are lower on the southern slopes than on the northern slopes, with a difference between 20 and 200m. This is mainly because that the use of fires to crerate pastures has removed the forest vegetation at the previous timberline and above. In fact, in many places, well-preserved forests on the south slopes have even high timberline position that the corresponding northern slopes. At subalpine zone, grazing activities could have prohibited the natural regeneration of many forest fire sites and maintained the forest position at the present level. Grazing has a significant impact on the regernation process of forest communities at the timberline zone. Natural timberline and treeline ecotone has much higher density of treeline species individuals especially the emergents and seedlings than the timberlines that are maintained by human activities. In natural timberline and treelien ecotone without grazing interference, the density of the I Class seedlings (less than 10cm in height) ranges 725-2917 /hm2; while that in the treatment plots (with grazing disturbance) is only 0-228//hm2；II Class seedlings (10-50cm）exhibit similar density trends, reaching 550-5208//hm2 in natural timberline without grazing but only 14-321//hm2 in the plots with grazing treatment. In the man-created timberlines, there is no I Class seedling at all in plots with normal grazing activities. In relative terms, in plots without grazing activities, the propotion of I Class and II Class seedlings is much higher than that in plots with grazing. Grazing activities have significantly reduced the number of seedlings in the timberline ane treeline ecotone, and thus affect the natural regeneration process of the forests. Shrubs at the timberline and treeline ecotone can effectively protect the seedlings from severe climate and animal tramping, thus increasing the survival rate of the seedlings. Grazing following fires can completely inhibit forest regeneration process at timberline. Changes in agropastoral transhumance will have great impact on the timberline and treeline pattern of the studied area. The decrease in grazing intensity on alpine pastrues and the cessation of the use of fires will result an increase in the cover and height of shrubs above the present human-maintained treeline, which will create further condition for the expansion of timberline forest communities. Eastern Tibet Plateau harbors some most important mountain ecosystems of China that are of vital importance to the country’s strategy in biodiversity conservation, environmental construction and sustainable sociaoeconomic development. A proper knowledge of the interactions between traditional livelihood systems and the ecosystems in the region is a precondition to the realization of the above strategic goals. Therefore, the decision-makers must have a holistic and systemic perspective so as to integrate the multiple objectives of promoting sustainable socioeconomic development, conserving biological and cultural diversity and maintaining the balances among people, animal population and the ecosystems.

A conceptual approach to integrated coastal management

This paper focuses on the concept of Integrated Coastal Management (ICM) putting the theoretical basis of Chapter 17, Agenda 21 (UN Conference on Environment and Development, UNCED), in relation to the theoretical backgrounds on which the development of coastal area programmes have been founded. Reasoning leads us to think that the general system theory is the proper conceptual basis to stimulate ICM and that, in this theoretical context, integration is to be pursued between (i) the claiming of national maritime jurisdictional belts and the protection of the coastal ecosystem, (ii) the coastal system and its external environment, (iii) the decision making systems acting at all levels (international, regional, national and local). Integration, therefore, should be thought of as a political process.

大巴山北坡垂直带土壤特性及系统分类

通过野外考察与室内分析相结合 ,对大巴山北坡不同海拔高度的土壤特性进行研究 ,确定了各剖面的诊断层和诊断特性及其在系统分类中的位置。结果表明大巴山北坡各垂直带土壤在系统分类中可划归 2个土纲的 6个土类 ,系统分类中土壤的分类位置与发生分类位置并不具有简单的一一对应的关系。

A copper/p-sulfonatocalix[6]arene/phenanthroline supramolecular compound with 1D [Cu-2-calixarene](n) coordination chains

A supramolecular complex [Cu(phen)(2)H2O]{[Cu(phen)(H2O)](2)[C6AS]}center dot 2.5H(2)O (phen = 1,10'-phenanthroline and C6AS = p-sulfonatocalix[6]arene) has been synthesized under hydrothermal condition, and characterized by IR spectroscopy, TG analysis and single crystal X-ray diffraction. In the structure, unprecedented 1D ({[Cu(phen)(H2O)](2)[C(6)AS]}(2-))(n) coordination chains (exactly being belts) are stacked into some 2D layers by the pi center dot center dot center dot pi stacking interactions, which are further interconnected into a 3D extended structure by hydrogen bonding.

Preparation of Hollow Carbon and Silicon Carbide Fibers with Different Cross-Sections by using Electrospun Fibers as Templates

Hollow carbon nanofibers with circular and rectangular opening were prepared by using electrospun silica fibers as templates. Silica fibers were synthesized by electrospinning, and they were coated with a carbon layer formed by thermal decomposition and carbonization of polystyrene under a nitrogen atmosphere. Hollow carbon nanofibers with circular and rectangular openings were then obtained after the silica core was etched by hydrofluoric acid. The carbon nanofibers with different morphologies also could be used as templates to fabricate silicon carbide fibers. The silicon carbide fibers with circular and rectangular openings could be obtained by using hollow carbon nanofibers and carbon belts as templates, respectively.

One-Dimensional Ce3+- and/or Tb3+-Doped X-1-Y2SiO5 Nanofibers and Microbelts: Electrospinning Preparation and Luminescent Properties

One-dimensional X-1-Y2SiO5:Ce3+ and -Tb3+ nanofibers and quasi-one-dimensional X-1-Y2SiO5:Ce3+ and -Tb3+ microbelts have been prepared by a simple and cost-effective electrospinning process. X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry, transmission electron microscopy, high-resolution transmission electron microscopy, photoluminescence (PL), and cathodoluminescence spectra were used to characterize the samples. SEM results indicate that the as-prepared fibers and belts are smooth and uniform with a length of several tens to hundreds of micrometers, whose diameters decrease after being annealed at 1000 degrees C for 3 h. Under ultraviolet excitation and low-voltage electron beam excitation, the doped rare earth ions show their characteristic emission, that is, Ce3+ 5d-4f and Tb3+ D-5(4)-F-7(J) (J = 6, 5 4, 3) transitions, respectively.

Preparation and Luminescence Properties of Gd2MoO6:Eu3+ Nanofibers and Nanobelts by Electrospinning

Gd2MoO6:Eu3+ nanofibers and nanobelts have been prepared by a combination method of the sol-gel process and electrospinning. X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy, photoluminescence, and low voltage cathodoluminescence as well as kinetic decays were used to characterize the resulting samples. The results of XRD and FTIR indicate that the Gd2MoO6:Eu3+ samples have crystallized at 600 degrees C with the monoclinic (alpha) structure. The SEM and TEM results indicate that the as-formed precursor fibers and belts are uniform and that the as-prepared nanofibers and nanobelts consist of nanoparticles. Gd2MoO6:Eu3+ phosphors show their strong characteristic emission under UV excitation (353 nm) and low voltage electron-beam excitation (3 kV), making the materials have potential applications in fluorescent lamps and field-emission displays.