An enzymatic route to a benzocarbazole framework using bacterial CotA laccase

The CotA laccase-catalysed oxidation of the meta, para-disubstituted arylamine 2,4-diaminophenyldiamine delivers, under mild reaction conditions, a benzocarbazole derivative (1) (74% yield), a key structural motif of a diverse range of applications. This work extends the scope of aromatic frameworks obtained using these enzymes and represents a new efficient and clean method to construct in one step C-C and C-N bonds.

Syngas production by water electrolysis: preliminary tests on methane production

Master Thesis to obtain the Master degree in Chemical Engineering - Branch Chemical Processes

Echovirus 4 associated to hand, foot and mouth disease

Hand, foot and mouth disease (HFMD) is a contagious enteroviral infection occurring primarily in children and characterized by vesicular palmoplantar eruptions and erosive stomatitis. Echovirus 4 (EV-4) has been commonly associated with aseptic meningitis. The association of HFMD with EV-4 has not been reported previously. Two samples of a 14-month child who presented mild fever, sores in the mouth, rash with blisters on the palm of hands and soles of feet were sent to Enteric Viruses Laboratory of Adolfo Lutz Institute. Clinical samples were inoculated in three different cell lines, and those which presented cytopathic effect (CPE), were submitted to Indirect Immunofluorescence Assay (IFA) and "one step" RT-PCR. Agarose gel electrophoresis from RT-PCR product, showed a product with 437 bp, which is characteristic of Enterovirus group. Echovirus 4 was identified by IFA. Although HFMD is a viral infection associated mainly with Enterovirus 71 (HEV-71) and Coxsackievirus A16 (CV-A16), our results demonstrate a diversity of serotype related to HFMD and stress the importance of epidemiological surveillance to this disease and its complications.

Validation of a rapid stool antigen test for diagnosis of Helicobacter pylori infection

The aim of this study was to validate the rapid lateral flow Helicobacter pylori stool antigen test (One step H. pylori antigen test, ACON laboratories, San Diego, USA; Prime diagnostics, São Paulo), using 13C-Urea Breath Test as the gold standard for H. pylori infection diagnosis. A total of 98 consecutive patients, asymptomatic or dyspeptic, entered the study. Sixty-nine were women, with a mean age of 45.76 &plusmn; 14.59 years (14 to 79 years). In the H. pylori-positive group, the rapid stool antigen test detected H. pylori antigen in 44 of the 50 positive patients (sensitivity 88%; 95% CI: 75.7-95.5%), and six false-negative; and in the H. pylori-negative group 42 presented negative results (specificity 87.5%; 95% CI: 74.7-95.3%), and six false-positive, showing a substantial agreement (Kappa Index = 0.75; p < 0.0001; 95% CI: 0.6-0.9). Forty four of fifty patients that had positive stool antigen were H. pylori-positive, the PPV of the stool antigen test was 88% (95% CI: 75.7-95.5%), and 42 patients with negative stool antigen test were H. pylori-negative, the NPV of the stool antigen test was 87.5% (95% CI: 74.7-95.3%). We conclude that the lateral flow stool antigen test can be used as an alternative to breath test for H. pylori infection diagnosis especially in developing countries.

Performance of state space and ARIMA models for consumer retail sales forecasting

Forecasting future sales is one of the most important issues that is beyond all strategic and planning decisions in effective operations of retail businesses. For profitable retail businesses, accurate demand forecasting is crucial in organizing and planning production, purchasing, transportation and labor force. Retail sales series belong to a special type of time series that typically contain trend and seasonal patterns, presenting challenges in developing effective forecasting models. This work compares the forecasting performance of state space models and ARIMA models. The forecasting performance is demonstrated through a case study of retail sales of five different categories of women footwear: Boots, Booties, Flats, Sandals and Shoes. On both methodologies the model with the minimum value of Akaike's Information Criteria for the in-sample period was selected from all admissible models for further evaluation in the out-of-sample. Both one-step and multiple-step forecasts were produced. The results show that when an automatic algorithm the overall out-of-sample forecasting performance of state space and ARIMA models evaluated via RMSE, MAE and MAPE is quite similar on both one-step and multi-step forecasts. We also conclude that state space and ARIMA produce coverage probabilities that are close to the nominal rates for both one-step and multi-step forecasts.

New strategies to detect and understand genotype-by-environment interactions and QTL-by-environment interactions

Dissertação para obtenção do Grau de Doutor em Estatística e Gestão do Risco, especialidade em Estatística

Emergência e declínio do piano na vida quotidiana madeirense (1821‐1930)

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Doutor em Ciências Musicais

Multicore Scheduling of Real-Time Irregular Parallel Algorithms in Linux

Face à estagnação da tecnologia uniprocessador registada na passada década, aos principais fabricantes de microprocessadores encontraram na tecnologia multi-core a resposta `as crescentes necessidades de processamento do mercado. Durante anos, os desenvolvedores de software viram as suas aplicações acompanhar os ganhos de performance conferidos por cada nova geração de processadores sequenciais, mas `a medida que a capacidade de processamento escala em função do número de processadores, a computação sequencial tem de ser decomposta em várias partes concorrentes que possam executar em paralelo, para que possam utilizar as unidades de processamento adicionais e completar mais rapidamente. A programação paralela implica um paradigma completamente distinto da programação sequencial. Ao contrário dos computadores sequenciais tipificados no modelo de Von Neumann, a heterogeneidade de arquiteturas paralelas requer modelos de programação paralela que abstraiam os programadores dos detalhes da arquitectura e simplifiquem o desenvolvimento de aplicações concorrentes. Os modelos de programação paralela mais populares incitam os programadores a identificar instruções concorrentes na sua lógica de programação, e a especificá-las sob a forma de tarefas que possam ser atribuídas a processadores distintos para executarem em simultâneo. Estas tarefas são tipicamente lançadas durante a execução, e atribuídas aos processadores pelo motor de execução subjacente. Como os requisitos de processamento costumam ser variáveis, e não são conhecidos a priori, o mapeamento de tarefas para processadores tem de ser determinado dinamicamente, em resposta a alterações imprevisíveis dos requisitos de execução. `A medida que o volume da computação cresce, torna-se cada vez menos viável garantir as suas restrições temporais em plataformas uniprocessador. Enquanto os sistemas de tempo real se começam a adaptar ao paradigma de computação paralela, há uma crescente aposta em integrar execuções de tempo real com aplicações interativas no mesmo hardware, num mundo em que a tecnologia se torna cada vez mais pequena, leve, ubíqua, e portável. Esta integração requer soluções de escalonamento que simultaneamente garantam os requisitos temporais das tarefas de tempo real e mantenham um nível aceitável de QoS para as restantes execuções. Para tal, torna-se imperativo que as aplicações de tempo real paralelizem, de forma a minimizar os seus tempos de resposta e maximizar a utilização dos recursos de processamento. Isto introduz uma nova dimensão ao problema do escalonamento, que tem de responder de forma correcta a novos requisitos de execução imprevisíveis e rapidamente conjeturar o mapeamento de tarefas que melhor beneficie os critérios de performance do sistema. A técnica de escalonamento baseado em servidores permite reservar uma fração da capacidade de processamento para a execução de tarefas de tempo real, e assegurar que os efeitos de latência na sua execução não afectam as reservas estipuladas para outras execuções. No caso de tarefas escalonadas pelo tempo de execução máximo, ou tarefas com tempos de execução variáveis, torna-se provável que a largura de banda estipulada não seja consumida por completo. Para melhorar a utilização do sistema, os algoritmos de partilha de largura de banda (capacity-sharing) doam a capacidade não utilizada para a execução de outras tarefas, mantendo as garantias de isolamento entre servidores. Com eficiência comprovada em termos de espaço, tempo, e comunicação, o mecanismo de work-stealing tem vindo a ganhar popularidade como metodologia para o escalonamento de tarefas com paralelismo dinâmico e irregular. O algoritmo p-CSWS combina escalonamento baseado em servidores com capacity-sharing e work-stealing para cobrir as necessidades de escalonamento dos sistemas abertos de tempo real. Enquanto o escalonamento em servidores permite partilhar os recursos de processamento sem interferências a nível dos atrasos, uma nova política de work-stealing que opera sobre o mecanismo de capacity-sharing aplica uma exploração de paralelismo que melhora os tempos de resposta das aplicações e melhora a utilização do sistema. Esta tese propõe uma implementação do algoritmo p-CSWS para o Linux. Em concordância com a estrutura modular do escalonador do Linux, ´e definida uma nova classe de escalonamento que visa avaliar a aplicabilidade da heurística p-CSWS em circunstâncias reais. Ultrapassados os obstáculos intrínsecos `a programação da kernel do Linux, os extensos testes experimentais provam que o p-CSWS ´e mais do que um conceito teórico atrativo, e que a exploração heurística de paralelismo proposta pelo algoritmo beneficia os tempos de resposta das aplicações de tempo real, bem como a performance e eficiência da plataforma multiprocessador.

Métodos Preditivos de Metastização Ganglionar Adicional em Cancro da Mama com Gânglio Sentinela Positivo

Objectivos As recomendações para a realização de linfadenectomia axilar nos doentes com cancro da mama em estádio precoce e sujeitas a biópsia de gânglio sentinela com presença de macrometástase foram recentemente actualizadas, baseadas nos últimos estudos publicados (Z0011 e IBCSG 23-01). Mantém-se, no entanto, alguma controvérsia na decisão de não realização de cirurgia radical axilar nos doentes com gânglio sentinela positivo. Têm sido desenvolvidos métodos preditivos de metastização ganglionar adicional. Um dos mais conhecidos, desenvolvido no Memorial Sloan-Kettering Cancer Center (MSKCC), recorre a variáveis do tumor e características do gânglio sentinela. Mais recentemente com a utilização de métodos moleculares (como o One Step Nucleic Acid - OSNA) para estudo do gânglio sentinela tem sido avaliada a capacidade preditiva da quantidade total de cópias mRNA da citoqueratina 19. Pretende-se estudar na nossa amostra a capacidade preditiva do nomograma do MSKCC e da carga tumoral total. Propõe-se ainda avaliar o número de macrometástases encontradas na biópsia de gânglio sentinela e sua relação na metastização ganglionar adicional. Material e métodos Avaliação retrospectiva de 819 doentes com cancro da mama (Tis – T2) submetidos a biópsia de gânglio sentinela no Centro Hospitalar de Lisboa Central durante o período de 1 de Janeiro de 2005 e 31 de Dezembro de 2013. Foram identificados 123 doentes com gânglio sentinela positivo que realizaram linfadenectomia axilar imediata. A análise do gânglio sentinela foi executada por métodos histológicos em 78 doentes e por método molecular (OSNA) em 45 doentes. Os dois grupos foram estudados separadamente, tendo sido no primeiro aplicado o nomograma do MSKCC e no segundo obtida a carga tumoral total. Utilizou-se o modelo de regressão logística para analisar o poder preditivo e discriminativo destes dois métodos. Adicionalmente, para avaliar a potencial importância do número de macrometástases na metastização ganglionar adicional, foi ajustado um novo modelo de regressão logística considerando esta variável e a carga tumoral total. Ambos os métodos foram também avaliados através da área sob a curva ROC (AUC) e do teste de Hosmer-Lemeshow, respectivamente. O nível de significância adoptado foi α = 0.05. O estudo estatístico foi realizado com recurso ao SPSS. Resultados No grupo em que foi aplicado o nomograma do MSKCC obteve-se uma AUC=0.67 (I.C. 95% = 0.55 – 0.79), e no grupo em que foi avaliada a carga tumoral total uma AUC=0.78 (I.C. 95% = 0.64 – 0.91). Os poderes preditivos de ambos foram, respectivamente, p=0.15 e p=0.46. Constatou-se que o desempenho do modelo resultante da junção da carga tumoral total com o número de macrometástases encontradas no estudo do gânglio sentinela foi bastante satisfatório (AUC=0.87, I.C 95% = 0.76 – 0.98, poder preditivo p=0.33). Conclusão Foi validado externamente o modelo do MSKCC para a amostra em estudo, apresentando uma menor acuidade discriminativa em relação ao estudo original (AUC=0.67 versus AUC=0.75). Por outro lado, após verificação da homogeneidade de ambos os grupos no que diz respeito a todas as variáveis de interesse, conclui-se que a carga tumoral total aparenta uma maior acuidade preditiva e discriminativa na metastização ganglionar adicional que o nomograma do MSKCC. Quando desenvolvido um modelo agregando a carga tumoral total avaliada por OSNA e o número de macrometástases no gânglio sentinela, obteve-se uma capacidade discriminativa ainda superior. A carga tumoral total avaliada por OSNA, ou esta incluída num modelo conjunto com o número de macrometástases obtidas no estudo do gânglio sentinela, poderão representar importantes ferramentas preditivas. Serão no entanto necessários estudos adicionais com amostras superiores para consolidar estes resultados. Bibliografia 1. Giuliano AE, McCall L, Beitsch P, Whitworth PW, Blumencranz P, Leitch AM, et al. Locoregional recurrence after sentinel lymph node dissection with or without axillary dissection in patients with sentinel lymph node metastases: the American College of Surgeons Oncology Group Z0011 randomized trial. Ann Surg. Setembro de 2010;252(3):426–32; discussion 432–3. 2. Galimberti V, Cole BF, Zurrida S, Viale G, Luini A, Veronesi P, et al. Axillary dissection versus no axillary dissection in patients with sentinel-node micrometastases (IBCSG 23-01): a phase 3 randomised controlled trial. Lancet Oncol. Abril de 2013;14(4):297–305. 3. Bevilacqua JLB, Kattan MW, Fey JV, Cody HS, Borgen PI, Van Zee KJ. Doctor, what are my chances of having a positive sentinel node? A validated nomogram for risk estimation. J Clin Oncol. 20 de Agosto de 2007;25(24):3670–9. 4. Piñero A, Canteras M, Moreno A, Vicente F, Giménez J, Tocino A, et al. Multicenter validation of two nomograms to predict non-sentinel node involvement in breast cancer. Clin Transl Oncol. Fevereiro de 2013;15(2):117–23. 5. Banerjee SM, Michalopoulos NV, Williams NR, Davidson T, El Sheikh S, McDermott N, et al. Detailed evaluation of one step nucleic acid (OSNA) molecular assay for intra-operative diagnosis of sentinel lymph node metastasis and prediction of non-sentinel nodal involvement: experience from a London teaching hospital. Breast. Agosto de 2014;23(4):378–84. 6. Peg V, Espinosa-Bravo M, Vieites B, Vilardell F, Antúnez JR, de Salas MS, et al. Intraoperative molecular analysis of total tumor load in sentinel lymph node: a new predictor of axillary status in early breast cancer patients. Breast Cancer Res Treat. Maio de 2013;139(1):87–93. 7. Tiernan JP, Verghese ET, Nair A, Pathak S, Kim B, White J, et al. Systematic review and meta-analysis of cytokeratin 19-based one-step nucleic acid amplification versus histopathology for sentinel lymph node assessment in breast cancer. Br J Surg. Março de 2014;101(4):298–306. 8. Heilmann T, Mathiak M, Hofmann J, Mundhenke C, van Mackelenbergh M, Alkatout I, et al. Intra-operative use of one-step nucleic acid amplification (OSNA) for detection of the tumor load of sentinel lymph nodes in breast cancer patients. J Cancer Res Clin Oncol. Outubro de 2013;139(10):1649–55. 9. Chaudhry A, Williams S, Cook J, Jenkins M, Sohail M, Calder C, et al. The real-time intra-operative evaluation of sentinel lymph nodes in breast cancer patients using One Step Nucleic Acid Amplification (OSNA) and implications for clinical decision-making. Eur J Surg Oncol. Fevereiro de 2014;40(2):150–7.

A CMMI-compliant requirements management and development process

Requirements Engineering has been acknowledged an essential discipline for Software Quality. Poorly-defined processes for eliciting, analyzing, specifying and validating requirements can lead to unclear issues or misunderstandings on business needs and project’s scope. These typically result in customers’ non-satisfaction with either the products’ quality or the increase of the project’s budget and duration. Maturity models allow an organization to measure the quality of its processes and improve them according to an evolutionary path based on levels. The Capability Maturity Model Integration (CMMI) addresses the aforementioned Requirements Engineering issues. CMMI defines a set of best practices for process improvement that are divided into several process areas. Requirements Management and Requirements Development are the process areas concerned with Requirements Engineering maturity. Altran Portugal is a consulting company concerned with the quality of its software. In 2012, the Solution Center department has developed and applied successfully a set of processes aligned with CMMI-DEV v1.3, what granted them a Level 2 maturity certification. For 2015, they defined an organizational goal of addressing CMMI-DEV maturity level 3. This MSc dissertation is part of this organization effort. In particular, it is concerned with the required process areas that address the activities of Requirements Engineering. Our main goal is to contribute for the development of Altran’s internal engineering processes to conform to the guidelines of the Requirements Development process area. Throughout this dissertation, we started with an evaluation method based on CMMI and conducted a compliance assessment of Altran’s current processes. This allowed demonstrating their alignment with the CMMI Requirements Management process area and to highlight the improvements needed to conform to the Requirements Development process area. Based on the study of alternative solutions for the gaps found, we proposed a new Requirements Management and Development process that was later validated using three different approaches. The main contribution of this dissertation is the new process developed for Altran Portugal. However, given that studies on these topics are not abundant in the literature, we also expect to contribute with useful evidences to the existing body of knowledge with a survey on CMMI and requirements engineering trends. Most importantly, we hope that the implementation of the proposed processes’ improvements will minimize the risks of mishandled requirements, increasing Altran’s performance and taking them one step further to the desired maturity level.

Customer relationship management at Siemens Healthcare – a diagnosis and proposal for strategy and market segmentation

Towards a holistic perspective of CRM, this project aims to diagnose and propose a strategy and market segmentation for Siemens Healthcare. The main underlying principle is to apply a full customer-centric outlook taking own business properties into consideration while preserving Siemens Healthcare’s culture and vision. Mainly focused on market segmentation, this project goes beyond established boundaries by employing an unbiased perspective of CRM while challenging current strategy, goals, processes, tools, initiatives and KPIs. In order to promote a sustainable business excellence strategy, this project aspires to streamline CRM strategic importance and driving the company one step forward.

Probing dispersion and re-agglomeration phenomena upon melt-mixing of polymer-functionalized graphite nanoplates

A one-step melt-mixing method is proposed to study dispersion and re-agglomeration phenomena of the as-received and functionalized graphite nanoplates in polypropylene melts. Graphite nanoplates were chemically modified via 1,3-dipolar cycloaddition of an azomethine ylide and then grafted with polypropylene-graft-maleic anhydride. The effect of surface functionalization on the dispersion kinetics, nanoparticle re-agglomeration and interface bonding with the polymer is investigated. Nanocomposites with 2 or 10 wt% of as-received and functionalized graphite nanoplates were prepared in a small-scale prototype mixer coupled to a capillary rheometer. Samples were collected along the flow axis and characterized by optical microscopy, scanning electron microscopy and electrical conductivity measurements. The as-received graphite nanoplates tend to re-agglomerate upon stress relaxation of the polymer melt. The covalent attachment of a polymer to the nanoparticle surface enhances the stability of dispersion, delaying the re-agglomeration. Surface modification also improves interfacial interactions and the resulting composites presented improved electrical conductivity.

Biological behaviour of thin films consisting of Au nanoparticles dispersed in a TiO2 dielectric matrix

In this work it was studied the possible use of thin films, composed of Au nanoparticles (NPs) embedded in a TiO2 matrix, in biological applications, by evaluating their interaction with a well-known protein, Bovine Serum Albumin (BSA), as well as with microbial cells (Candida albicans). The films were produced by one-step reactive DC magnetron sputtering followed by heat-treatment. The samples revealed a composition of 8.3 at.% of Au and a stoichiometric TiO2 matrix. The annealing promoted grain size increase of the Au NPs from 3 nm (at 300 °C) to 7 nm (at 500 °C) and a progressive crystallization of the TiO2 matrix to anatase. A broad localized surface plasmon resonance (LSPR) absorption band (λ = 580–720 nm) was clearly observed in the sample annealed at 500 °C, being less intense at 300 °C. The biological tests indicated that the BSA adhesion is dependent on surface nanostructure morphology, which in turn depends on the annealing temperature that changed the roughness and wettability of the films. The Au:TiO2 thin films also induced a significant change of the microbial cell membrane integrity, and ultimately the cell viability, which in turn affected the adhesion on its surface. The microstructural changes (structure, grain size and surface morphology) of the Au:TiO2 films promoted by heat-treatment shaped the amount of BSA adhered and affected cell viability.

Mulheres (in)visíveis: que "género" de comentadores no horário nobre da televisão?

Dissertação de mestrado em Ciências da Comunicação (área de especialização em Informação e Jornalismo)

Biological materials in colorectal surgery: current applications and potential for the future.

Biological materials are increasingly used in abdominal surgery for ventral, pelvic and perineal reconstructions, especially in contaminated fields. Future applications are multi-fold and include prevention and one-step closure of infected areas. This includes prevention of abdominal, parastomal and pelvic hernia, but could also include prevention of separation of multiple anastomoses, suture- or staple-lines. Further indications could be a containment of infected and/or inflammatory areas and protection of vital implants such as vascular grafts. Reinforcement patches of high-risk anastomoses or unresectable perforation sites are possibilities at least. Current applications are based mostly on case series and better data is urgently needed. Clinical benefits need to be assessed in prospective studies to provide reliable proof of efficacy with a sufficient follow-up. Only superior results compared with standard treatment will justify the higher costs of these materials. To date, the use of biological materials is not standard and applications should be limited to case-by-case decision.