Compartimentos de K, Ca e Mg em solos e sua relação com o crescimento inicial, fisiologia e produtividade do eucalipto

Forestry has grown in a continuous and accelerated manner in Brazil, constituting a strategic activity for the generation of employment, income and tributes, favoring social and economic development of Brazilian agribusiness. The objectives of this study were: (1) evaluate the contents of K, Ca and Mg in the reserve compartments, non-interchangeable, interchangeable, available and the speed of its release, its correlations and its effects over productivity (annual average increment – AAI) of eucalyptus plantations, in forest sites cultivated in soils of the state of Rio Grande do Sul; (2) evaluate the initial growth, nutrition and physiological aspects of eucalyptus plants, cultivated with and without the addition of mineral sources of potassium (K), calcium (Ca) and magnesium (MG), in soils obtained from forest sites in the state of Rio Grande do Sul. In the first study, contents of K, Ca and Mg were evaluated in sulfuric digestion extract, boiling nitric acid, ammonium chloride, Mehlich-1 (only K), potassium chloride (Ca and Mg), as well as the release speed of these nutrients in the soil. In the second study, growth variables, nutritional aspects, photosynthetic rate (A) and transpiration rate of the plants (E) grown in distinct soils were evaluated under controlled conditions. The contents of K, Ca and Mg varied between compartments and depths in the studied soil classes, with the highest proportions found in the reserve compartment, indicating the importance of this compartment for the supplement of these nutrients at average and long terms. The great majority of K, Ca and Mg compartments presented significant correlations between each other, showing the dependence between them and the importance of evaluating the contents of these nutrients in the different compartments to adapt the nutritional management of the plants to each soil class, and to obtain continuous productions, minimizing the negative effects to the environment. Plants cultivated in soils that present larger reserves, availability and K, Ca and Mg release kinetics, presented similar height (H), stem diameter (SD) and shoot dry mass (SDM), with or without fertilization with K, Ca and Mg. The plants presented higher leaf content and accumulation of K in all soils fertilized with K, Ca and Mg.

Avaliação de interface de reação e colisão para eliminar interferências poliatômicas na análise de etanol combustível por ICP-MS

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determinação direta e simultânea de 'AL', 'AS', 'CU', 'FE', 'MN' e 'NI' em álcool etílico hidratado combustível por espectrometria de absorção atômica em forno de grafite

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos da preparação de superfície da liga AA6063T5 e do desenvolvimento de revestimentos híbridos orgânico-inorgânicos a base de siloxano-PMMA para aplicação anticorrosiva

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização mecânica e microestrutural de um aço de baixo carbono

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Síntese, caracterização e estudo do comportamento térmico dos 2-metoxicinamalpiruvatos de lantanídeos (III), exceto promécio, e ítrio (III) no estado sólido

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação de fluido de corte em quantidades reduzidas para usinagem do aço SAE 52100 no processo de retificação centerless de passagem

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Determinação de Cd, Pb e Cu em particulados atmosféricos da região de Presidente Prudente por análise voltamétrica utilizando eletrodo de mercúrio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Measurements and modeling of reactive nitrogen deposition in southeast Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Isolamento de leveduras em indústria de refrigerante e avaliação da susceptibilidade à ação antimicrobiana dos agentes sanificantes de uso industrial

Pós-graduação em Microbiologia - IBILCE

Toxicidade de cádmio e zinco em Danio rerio: comparação entre valores permitidos em legislação para proteção da vida aquática e a potencial atuação como interferentes endócrinos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades estruturais e espectroscópicas de WO3 e WO3:Eu3+

Used as catalysts even in organic and inorganic molecules, as additives on catalysts, electrochromic films on smart windows the tungsten trioxide have been largely studied on the lasts decades, but there is just a few about it's luminescence. Using as precursors nitric acid and sodium tungstate the tungsten trioxide were been prepared thru wet process then treating on thermic and hydrothermal treatments. Where been evaluated the effects of methodology, nitric acid concentration, duration and temperature of treatments. The samples were characterized by X-ray diffraction (XRD), Raman scattering spectroscopy (RSS), Fourier transformed infrared spectroscopy, photoluminescence spectroscopy (PLS) and X-ray excited optical luminescence (XEOL). Hydrated phases of tungsten trioxide were obtained through hydrothermal treatments and the non-hydrated phases occur with thermic treatments. The acid concentration has the ability to determine the major phase formed as well the temperature determine the hydratation of the product. With lower temperatures dihydrate phase were preferable formed and with the rise of temperature, the water molecules were lost up to the fractionary hydratation and then the non-hydrated phase with higher temperatures depending on the atmosphere used on the thermal treatment. Doping the system with europium ions even substituting tungsten or in the interstices of the matrix were not been successful, as well the XEOL spectroscopy intensity were null and quite low for ultraviolet and visible excitation photoluminescence because of oxygen defect levels localized into the prohibited band.

RB30-246 Testing Ice Cream for Butterfat

Butterfat is usually the most expensive ingredient of ice cream; hence, great care is necessary in controllng its use. The manufacturer of ice cream, whether doing a large or a small volume of business, must manufacture a product that will comply with the established fat standard. Some means of determining the percentage of butterfat in the product must be available in order to establish this control. This 1930 research bulletin discusses the different testing equipment used to test butterfat in ice cream.

Propriedades estruturais e espectroscópicas de WO3 e WO3:Eu3+

Used as catalysts even in organic and inorganic molecules, as additives on catalysts, electrochromic films on smart windows the tungsten trioxide have been largely studied on the lasts decades, but there is just a few about it's luminescence. Using as precursors nitric acid and sodium tungstate the tungsten trioxide were been prepared thru wet process then treating on thermic and hydrothermal treatments. Where been evaluated the effects of methodology, nitric acid concentration, duration and temperature of treatments. The samples were characterized by X-ray diffraction (XRD), Raman scattering spectroscopy (RSS), Fourier transformed infrared spectroscopy, photoluminescence spectroscopy (PLS) and X-ray excited optical luminescence (XEOL). Hydrated phases of tungsten trioxide were obtained through hydrothermal treatments and the non-hydrated phases occur with thermic treatments. The acid concentration has the ability to determine the major phase formed as well the temperature determine the hydratation of the product. With lower temperatures dihydrate phase were preferable formed and with the rise of temperature, the water molecules were lost up to the fractionary hydratation and then the non-hydrated phase with higher temperatures depending on the atmosphere used on the thermal treatment. Doping the system with europium ions even substituting tungsten or in the interstices of the matrix were not been successful, as well the XEOL spectroscopy intensity were null and quite low for ultraviolet and visible excitation photoluminescence because of oxygen defect levels localized into the prohibited band.

Determination of trace elements in bovine semen samples by inductively coupled plasma mass spectrometry and data mining techniques for identification of bovine class

The reproductive performance of cattle may be influenced by several factors, but mineral imbalances are crucial in terms of direct effects on reproduction. Several studies have shown that elements such as calcium, copper, iron, magnesium, selenium, and zinc are essential for reproduction and can prevent oxidative stress. However, toxic elements such as lead, nickel, and arsenic can have adverse effects on reproduction. In this paper, we applied a simple and fast method of multi-element analysis to bovine semen samples from Zebu and European classes used in reproduction programs and artificial insemination. Samples were analyzed by inductively coupled plasma spectrometry (ICP-MS) using aqueous medium calibration and the samples were diluted in a proportion of 1:50 in a solution containing 0.01% (vol/vol) Triton X-100 and 0.5% (vol/vol) nitric acid. Rhodium, iridium, and yttrium were used as the internal standards for ICP-MS analysis. To develop a reliable method of tracing the class of bovine semen, we used data mining techniques that make it possible to classify unknown samples after checking the differentiation of known-class samples. Based on the determination of 15 elements in 41 samples of bovine semen, 3 machine-learning tools for classification were applied to determine cattle class. Our results demonstrate the potential of support vector machine (SVM), multilayer perceptron (MLP), and random forest (RF) chemometric tools to identify cattle class. Moreover, the selection tools made it possible to reduce the number of chemical elements needed from 15 to just 8.