811 resultados para New concept
Resumo:
Based on the ray theory and Longuet-Higgins's linear,model of sea waves, the joint distribution of wave envelope and apparent wave number vector is established. From the joint distribution, we define a new concept, namely the outer wave number spectrum, to describe the outer characteristics of ocean waves. The analytical form of the outer wave number spectrum, the probability distributions of the apparent wave number vector and its components are then derived. The outer wave number spectrum is compared with the inner wave number spectrum for the average status of wind-wave development corresponding to a peakness factor P = 3. Discussions on the similarity and difference between the outer wave number spectrum and inner one are also presented in the paper. (C) 2002 Elsevier Science Ltd. All rights reserved.
Resumo:
从提升产品市场竞争力的角度,提出了面向产品竞争力设计和经营决策的理念,建立了有关的结构模型和框架模型。在此基础上,进一步提出了并行工程环境下实现基于产品开发周期的面向产品竞争力设计与经营决策一体化的设想;研究了面向产品竞争力设计与经营决策集成系统的特征、结构和功能。最后以汽车车身为例对并行工程环境下的车身设计与经营决策集成系统进行了应用研究。
Resumo:
讨论了非线性未建模不确定系统的自适应镇定问题。通过边界层次分析的方法,提出一和种简单的间接自适应控制方法。该方法克服了现有非线性自适应控制方法容易产生过渡控制的缺点。
Resumo:
通常,在一台带有托板输送系统的柔性制造设备(如柔性制造单元)上一次在托板上只装夹一个零件进行加工。“虚工件”法是指在一个托板上装多个相同或不同的零件,将它们视为一个零件投入设备中,用对各零件的NC 程序进行相关处理后得到的 NC 新程序进行加工。应用这种方法可以提高生产率,提高柔性并有利于均衡生产。分析了应用“虚工件”法的一些限制条件及其技术实施中的苦干技术关键.
Resumo:
Based on a viewpoint of an intricate system demanding high, this thesis advances a new concept that urban sustainable development stratagem is a high harmony and amalgamation among urban economy, geo-environment and tech-capital, and the optimum field of which lies in their mutual matching part, which quantitatively demarcates the optimum value field of urban sustainable development and establishes the academic foundation to describe and analyze sustainable development stratagem. And establishes a series of cause-effect model, a analysissitus model, flux model as well as its recognizing mode for urban system are established by the approach of System Dynamics, which can distinguish urban states by its polarity of entropy flows. At the same time, the matter flow, energy flow and information flow which exist in the course of urban development are analyzed based on the input/output (I/O) relationships of urban economy. And a new type of I/O relationships, namely new resources-environment account, are established, in which both resource and environment factors are considered. All above that settles a theoretic foundation for resource economy and environment economy as well as quantitative relationships of inter-function between urban development and geoenvironment, and gives a new approach to analyze natinal economy and urban sustainable development. Based on an analysis of the connection between resource-environmental construct of geoenvironment and urban economy development, the Geoenvironmental Carrying Capability (GeCC) is analyzed. Further more, a series of definitions and formula about the Gross Carrying Capability (GCC), Structure Carrying Capability (SCC) and Impulse Carrying Capability (ICC) is achieved, which can be applied to evaluate both the quality and capacity of geoenvironment and thereunder to determine the scale and velocity for urban development. A demonstrative study of the above is applied to Beihai city (Guangxi province, PRC), and the numerical value laws between the urban development and its geoenvironment is studied by the I/O relationship in the urban economy as following: · the relationships between the urban economic development and land use as well as consumption of underground water, metal mineral, mineral energy source, metalloid mineral and other geologic resources. · the relationships between urban economy and waste output such as industrial "3 waste", dust, rubbish and living polluted water as well as the restricting impact of both resource-environmental factors and tech-capital on the urban grow. · Optimization and control analysis on the reciprocity between urban economy and its geoenvironment are discussed, and sensitive factors and its order of the urban geoenvironmental resources, wastes and economic sections are fixed, which can be applied to determine the urban industrial structure, scale, grow rate matching with its geoenvironment and tech-capital. · a sustainable development stratagem for the city is suggested.
Resumo:
Jiyang & Changwei depressions are two neighboring depressions in Bahai Bay Basin, the famous oil rich basin in East China. The exploration activities in the past 40 years has proved that, within the basins, there exists not only plentiful sandstone hydrocarbon reservoirs (conventional), but also abundant special reservoirs as igneous rock, mudstone and conglomerate ones which have been knowing as the unconventional in the past, and with the prospecting activity is getting more and more detailed, the unconventional reservoirs are also getting more and more important for further resources, among which, the igneous lithological reservoir be of significance as a new research and exploration area. The purpose of this paper is, with the historical researches and data as base, the System Theory, Practice Theory and Modern Comprehensive Petroleum Geology Theory as guide, the theoretical and practice break through as the goal, and the existing problems in the past as the break through direction, to explore and establish a valid reservoir formation and distribution models for igneous strata in the profile of the eastern faulted basins. After investigating the distribution of the igneous rocks and review the history of the igneous rocks reservoirs in basins, the author focused on the following issues and correspondingly the following progresses have been made: 1.Come to a new basin evolution and structure model named "Combined-Basin-bodies Model" for Jiyang even Eastern faulted basins based on the study on the origin and evolution of Jiyang & Changwei basins, depending on this model, every faulted basin in the Bo-hai Bay Basin is consisted of three Basin-Bodies including the Lower (Mesozoic), Middle (Early Tertiary) and the Upper (Late Tertiary) Bodies, each evolved in different geo-stress setting and with different basin trend, shape and igneous-sedimentary buildings system, and from this one to next one, the basin experienced a kind of process named "shape changing" and "Style changing". 2. Supposed a serious of new realizations as follows (1) There were "multi-level magma sources" including Upper mantel and the Lower, Middle and even the Upper Shell magma Chambers in the historical Magma Processes in the basins; (2) There were "multi-magma accessing or pass" from the first level (Mantel faults) to the second, third and fourth levels (that is the different levels of fault in the basin sediment strata) worked in the geo-historical and magma processes; (3) Three tectonic magma cycles and more periods have been recognized those are matched with the "Basin -body-Model" and (4)The geo-historical magma processes were non-homogeneous in time and space scale and so the magma rocks distributed in "zones" or "belts". 3. The study of magma process's effect on basin petroleum conditions have been made and the following new conclusions were reached: (1) the eruptive rocks were tend to be matched with the "caped source rock", and the magma process were favorable to the maturing of the source rocks. (2) The magma process were fruitful to the accumulation of the non-hydrocarbon reservoirs however a over magma process may damage the grade of resource rock; (3) Eruptive activity provided a fruitful environment for the formation of such new reservoir rocks as "co-eruptive turbidity sandstones" and "thermal water carbonate rocks" and the intrusive process can lead to the origin of "metamorphism rock reservoir"; (4) even if the intrusive process may cause the cap rock broken, the late Tertiary intrusive rocks may indeed provide the lateral seal and act as the cap rock locally even regionally. All above progresses are valuable for reconstructing the magma-sedimentary process history and enriching the theory system of modem petroleum geology. 4. A systematic classification system has been provided and the dominating factors for the origin and distribution of igneous rock reservoirs have been worked out based on the systematic case studies, which are as follows: (1) The classification is given based on multi-factors as the origin type, litho-phase, type of reservoir pore, reservoir ability etc., (2) Each type of reservoir was characterized in a detailed way; (3) There are 7 factors dominated the intrusive reservoir's characteristics including depth of intrusion, litho-facies of surrounding rocks, thickness of intrusive rock, intrusive facies, frequency and size of the working faults, shape and tectonic deformation of rock, erosion strength of the rock and the time of the intrusion ect., in the contrast, 4 factors are for eruptive rocks as volcanic facies, frequency and size of the working faults, strength of erosion and the thermal water processing. 5. Several new concept including "reservoir litho-facies", "composite-volcanic facies" and "reservoir system" ect. Were suggested, based on which the following models were established: (1) A seven reservoir belts model for a intrusive unit profile and further more, (2) a three layers cubic model consisted of three layer as "metamorphic roe layer", "marginal layer" and "the core"; (3) A five zones vertical reservoir sequence model consisted of five litho-facies named A, B, C, D and E for a original lava unit and furthermore three models respectively for a erosion, subsidence and faulted lava unit; (4) A composite volcanic face model for a lava cone or a composite cone that is consisted of three facies as "crater and nearby face", "middle slope" and "far slope", among which, the middle slope face is the most potential reservoir area and producible for oil & gas. 6. The concept of "igneous reservoir" was redefined as the igneous, and then a new concept of "igneous reservoir system" was supposed which means the reservoir system consisted of igneous and associated non-igneous reservoirs, with non-hydrocarbon reservoir included. 7. The origin and distribution of igneous reservoir system were probed and generalized for the exploration applications, and origin models of the main reservoir sub-systems have been established including those of igneous, related non-igneous and non-hydrocarbon. For intrusive rocks, two reservoir formation models have been suggested, one is called "Original or Primary Model", and the another one is "Secondary Model"; Similarly, the eruptive rock reservoirs were divided in three types including "Highly Produced", "Moderately Produced" and "Lowly Produced" and accordingly their formation models were given off; the related non-igneous reservoir system was considered combination of eight reservoirs, among which some ones like the Above Anticline Trap are highly produced; Also, the non-hydrocarbon. Trap system including five kinds of traps was discussed. 8. The concept models for four reservoir systems were suggested, which include the intrusive system consisted of 7 kinds of traps, the land eruptive system with 6 traps, the under water eruptive system including 6 kinds of traps and the non-hydrocarbon system combined by 5 kinds of traps. In this part, the techniques for exploration of igneous reservoir system were also generalized and probed, and based on which and the geological progresses of this paper, the potential resources and distributions of every reservoir system was evaluated and about 186 millions of reserves and eight most potential non-hydrocarbon areas were predicted and outlined. The author believe that the igneous reservoir system is a very important exploration area and its study is only in its early stage, the framework of this paper should be filled with more detailed studies, and only along way, the exploration of igneous reservoir system can go into it's really effective stage.
Resumo:
The time-courses of orthographic, phonological and semantic processing of Chinese characters were investigated systematically with multi-channel event-related potentials (ERPs). New evidences concerning whether phonology or semantics is processed first and whether phonology mediates semantic access were obtained, supporting and developing the new concept of repetition, overlapping, and alternating processing in Chinese character recognition. Statistic parameter mapping based on physiological double dissociation has been developed. Seven experiments were conducted: I) deciding which type of structure, left-right or non-left-right, the character displayed on the screen was; 2) deciding whether or not there was a vowel/a/in the pronunciation of the character; 3) deciding which classification, natural object or non-natural object, the character was; 4) deciding which color, red or green, the character was; 5) deciding which color, red or green, the non-character was; 6) fixing on the non-character; 7) fixing on the crosslet. The main results are: 1. N240 and P240:N240 and P240 localized at occipital and prefrontal respectively were found in experiments 1, 2, 3, and 4, but not in experiments 5, 6, or 7. The difference between the former 4 and the latter 3 experiments was only their stimuli: the former's were true Chinese characters while the latter's were non-characters or crosslet. Thus Chinese characters were related to these two components, which reflected unique processing of Chinese characters peaking at about 240 msec. 2. Basic visual feature analysis: In comparison with experiment 7 there was a common cognitive process in experiments 1, 2, 4, and 6 - basic visual feature analysis. The corresponding ERP amplitude increase in most sites started from about 60 msec. 3. Orthography: The ERP differences located at the main processing area of orthography (occipital) between experiments 1, 2, 3, 4 and experiment 5 started from about 130 msec. This was the category difference between Chinese characters and non-characters, which revealed that orthographic processing started from about 130 msec. The ERP differences between the experiments 1, 2, 3 and the experiment 4 occurred in 210-250, 230-240, and 190-250 msec respectively, suggesting orthography was processed again. These were the differences between language and non-language tasks, which revealed a higher level processing than that in the above mentioned 130 msec. All the phenomena imply that the orthographic processing does not finished in one time of processing; the second time of processing is not a simple repetition, but a higher level one. 4. Phonology: The ERPs of experiment 2 (phonological task) were significantly stronger than those of experiment 3 (semantic task) at the main processing areas of phonology (temporal and left prefrontal) starting from about 270 msec, which revealed phonologic processing. The ERP differences at left frontal between experiment 2 and experiment 1 (orthographic task) started from about 250 msec. When comparing phonological task with experiment 4 (character color decision), the ERP differences at left temporal and prefrontal started from about 220 msec. Thus phonological processing may start before 220 msec. 5. Semantic: The ERPs of experiment 3 (semantic task) were significantly stronger than those of experiment 2 (phonological task) at the main processing areas of semantics (parietal and occipital) starting from about 290 msec, which revealed semantic processing. The ERP differences at these areas between experiment 3 and experiment 4 (character color decision) started from about 270 msec. The ERP differences between experiment 3 and experiment 1 (orthographic task) started from about 260 msec. Thus semantic processing may start before 260 msec. 6. Overlapping of phonological and semantic processing: From about 270 to 350 msec, the ERPs of experiment 2 (phonological task) were significantly larger than those of experiment 3 (semantic task) at the main processing areas of phonology (temporal and left prefrontal); while from about 290-360 msec, the ERPs of experiment 3 were significantly larger than those of experiment 2 at the main processing areas of semantics (frontal, parietal, and occipital). Thus phonological processing may start earlier than semantic and their time-courses may alternate, which reveals parallel processing. 7. Semantic processing needs part phonology: When experiment 1 (orthographic task) served as baseline, the ERPs of experiment 2 and 3 (phonological and semantic tasks) significantly increased at the main processing areas of phonology (left temporal and frontal) starting from about 250 msec. The ERPs of experiment 3, besides, increased significantly at the main processing areas of semantics (parietal and frontal) starting from about 260 msec. When experiment 4 (character color decision) served as baseline, the ERPs of experiment 2 and 3 significantly increased at phonological areas (left temporal and frontal) starting from about 220 msec. The ERPs of experiment 3, similarly, increased significantly at semantic areas (parietal and frontal) starting from about270 msec. Hence, before semantic processing, a part of phonological information may be required. The conclusion could be got from above results in the present experimental conditions: 1. The basic visual feature processing starts from about 60 msec; 2. Orthographic processing starts from about 130 msec, and repeats at about 240 msec. The second processing is not simple repetition of the first one, but a higher level processing; 3. Phonological processing begins earlier than semantic, and their time-courses overlap; 4. Before semantic processing, a part of phonological information may be required; 5. The repetition, overlapping, and alternating of the orthographic, phonological and semantic processing of Chinese characters could exist in cognition. Thus the problem of whether phonology mediates semantics access is not a simple, but a complicated issue.
Resumo:
Lee M.H., Model-Based Reasoning: A Principled Approach for Software Engineering, Software - Concepts and Tools,19(4), pp179-189, 2000.
Resumo:
B.M. Brown, M.S.P. Eastham, I. Wood: Conditions for the spectrum associated with a leaky wire to contain the interval [? ?2/4, ?), Arch. Math., 90, 6 (2008), 554-558
Resumo:
Wydział Filologii Polskiej i Klasycznej: Instytut Filologii Polskiej
Resumo:
The GENESI project has the ambitious goal of bringing WSN technology to the level where it can provide the core of the next generation of systems for structural health monitoring that are long lasting, pervasive and totally distributed and autonomous. This goal requires embracing engineering and scientific challenges never successfully tackled before. Sensor nodes will be redesigned to overcome their current limitations, especially concerning energy storage and provisioning (we need devices with virtually infinite lifetime) and resilience to faults and interferences (for reliability and robustness). New software and protocols will be defined to fully take advantage of the new hardware, providing new paradigms for cross-layer interaction at all layers of the protocol stack and satisfying the requirements of a new concept of Quality of Service (QoS) that is application-driven, truly reflecting the end user perspective and expectations. The GENESI project will develop long lasting sensor nodes by combining cutting edge technologies for energy generation from the environment (energy harvesting) and green energy supply (small form factor fuel cells); GENESI will define models for energy harvesting, energy conservation in super-capacitors and supplemental energy availability through fuel cells, in addition to the design of new algorithms and protocols for dynamic allocation of sensing and communication tasks to the sensors. The project team will design communication protocols for large scale heterogeneous wireless sensor/actuator networks with energy-harvesting capabilities and define distributed mechanisms for context assessment and situation awareness. This paper presents an analysis of the GENESI system requirements in order to achieve the ambitious goals of the project. Extending from the requirements presented, the emergent system specification is discussed with respect to the selection and integration of relevant system components.The resulting integrated system will be evaluated and characterised to ensure that it is capable of satisfying the functional requirements of the project
Resumo:
This dissertation introduces and evaluates dramagrammar, a new concept for the teaching and learning of foreign language grammar. Grammar, traditionally taught in a predominantly cognitive, abstract mode, often fails to capture the minds of foreign language learners, who are then unable to integrate this grammatical knowledge into their use of the foreign language in a meaningful way. The consequences of this approach are manifested at university level in German departments in England and Ireland, where the outcomes are unconvincing at best, abysmal at worst. Language teaching research suggests that interaction plays an important role in foreign language acquisition. Recent studies also stress the significance of grammatical knowledge in the learning process. Dramagrammar combines both interactive negotiation of meaning and explicit grammar instruction in a holistic approach, taking up the concept of drama in foreign language education and applying it to the teaching and learning of grammar. Techniques from dramatic art forms allow grammar to be experienced not only cognitively but also in social, emotional, and bodily-kinaesthetic ways. Dramagrammar lessons confront the learner with fictitious situations in which grammar is experienced 'hands-on'. Learners have to use grammatical structures in a variety of contexts, reflect upon their use, and then enlarge and enrich the dramatic situations with their newly acquired or more finely nuanced knowledge. The initial hypothesis of this dissertation is that the drammagrammar approach is beneficial to the acquisition of foreign language grammar. This hypothesis is corroborated by research findings from language teaching pedagogy and drama in education. It is further confirmed by empirical data gained from specifically designed dramagrammar modules that have been put into practice in German departments at the University of Leicester (England), the University Colleges Cork and Dublin (Ireland), the University of Bologna (Italy), as well as the Goethe-Institute Bratislava (Slovenia). The data suggests that drammagrammar has positive effects on both understanding of and attitudes towards grammar.
Resumo:
For at least two millennia and probably much longer, the traditional vehicle for communicating geographical information to end-users has been the map. With the advent of computers, the means of both producing and consuming maps have radically been transformed, while the inherent nature of the information product has also expanded and diversified rapidly. This has given rise in recent years to the new concept of geovisualisation (GVIS), which draws on the skills of the traditional cartographer, but extends them into three spatial dimensions and may also add temporality, photorealistic representations and/or interactivity. Demand for GVIS technologies and their applications has increased significantly in recent years, driven by the need to study complex geographical events and in particular their associated consequences and to communicate the results of these studies to a diversity of audiences and stakeholder groups. GVIS has data integration, multi-dimensional spatial display advanced modelling techniques, dynamic design and development environments and field-specific application needs. To meet with these needs, GVIS tools should be both powerful and inherently usable, in order to facilitate their role in helping interpret and communicate geographic problems. However no framework currently exists for ensuring this usability. The research presented here seeks to fill this gap, by addressing the challenges of incorporating user requirements in GVIS tool design. It starts from the premise that usability in GVIS should be incorporated and implemented throughout the whole design and development process. To facilitate this, Subject Technology Matching (STM) is proposed as a new approach to assessing and interpreting user requirements. Based on STM, a new design framework called Usability Enhanced Coordination Design (UECD) is ten presented with the purpose of leveraging overall usability of the design outputs. UECD places GVIS experts in a new key role in the design process, to form a more coordinated and integrated workflow and a more focused and interactive usability testing. To prove the concept, these theoretical elements of the framework have been implemented in two test projects: one is the creation of a coastal inundation simulation for Whitegate, Cork, Ireland; the other is a flooding mapping tool for Zhushan Town, Jiangsu, China. The two case studies successfully demonstrated the potential merits of the UECD approach when GVIS techniques are applied to geographic problem solving and decision making. The thesis delivers a comprehensive understanding of the development and challenges of GVIS technology, its usability concerns, usability and associated UCD; it explores the possibility of putting UCD framework in GVIS design; it constructs a new theoretical design framework called UECD which aims to make the whole design process usability driven; it develops the key concept of STM into a template set to improve the performance of a GVIS design. These key conceptual and procedural foundations can be built on future research, aimed at further refining and developing UECD as a useful design methodology for GVIS scholars and practitioners.
Resumo:
We introduce a new concept for the manipulation of fluid flow around three-dimensional bodies. Inspired by transformation optics, the concept is based on a mathematical idea of coordinate transformations and physically implemented with anisotropic porous media permeable to the flow of fluids. In two situations-for an impermeable object placed either in a free-flowing fluid or in a fluid-filled porous medium-we show that the object can be coated with an inhomogeneous, anisotropic permeable medium, such as to preserve the flow that would have existed in the absence of the object. The proposed fluid flow cloak eliminates downstream wake and compensates viscous drag, hinting at the possibility of novel propulsion techniques.
Resumo:
ct: We introduce a new concept for stimulated-Brillouin-scattering-based slow light in optical fibers that is applicable for broadly-tunable frequency-swept sources. It allows slow light to be achieved, in principle, over the entire transparency window of the optical fiber. We demonstrate a slow light delay of 10 ns at 1.55 μm using a 10-m-long photonic crystal fiber with a source sweep rate of 400 MHz/μs and a pump power of 200 mW. We also show that there exists a maximal delay obtainable by this method, which is set by the SBS threshold, independent of sweep rate. For our fiber with optimum length, this maximum delay is ~38 ns, obtained for a pump power of 760 mW.