Pace of Civil Litigation in the Queensland Supreme Court

The overriding philosophy of the Uniform Civil Procedure Rules 1999 in Queensland is to facilitate the just and expeditious resolution of the issues in a civil proceeding at minimum expense. The court is enjoined to apply the rules to avoid undue delay, expense and technicality. Parties impliedly undertake to the court and each other to proceed expeditiously. These rules adopt management theories developed to contain delay and cost in the civil justice system. A survey was designed to determine whether the overriding objective is being achieved in practice. The results indicate a reduction in the time from initiation of a proceeding to termination as compared to a sample of similar cases determined under the repealed Rules of the Supreme Court.

Regional renaissance? New forms of governance in nonmetropolitan Australia

Since the Second World War, Australian governments have adopted various approaches to governing nonmetropolitan Australia. The authors profile three distinct approaches to governance characterised as (1) state-centred regionalism; (2) new localism; and (3) new forms of multifaceted regionalism. Although recent policy initiatives have been justified by the argument that the region is the most suitable scale for planning and development in nonmetropolitan Australia, in practice the institutional landscape is a hybrid of overlapping local, regional, and national scales of action. The authors compare this new, multifaceted, regionalism with the so-called 'new regionalism currently being promoted in Western Europe and North America. It is argued that new regionalism differs in quite important ways from the regionalism currently being fostered in Australia. In Australia, the centrality of sustainability principles, and the attempt to foster interdependence amongst stakeholders from the state, market, and civil society, have produced a layer of networked governance that is different from that overseas. It is argued that there is a triple bottom-line 'promise' in the Australian approach which differs from the Western Europe/North American model, and which has the potential to deliver enhanced economic, social, and environmental outcomes.

Trade union policy and new technology: the Civil and Public Services Association

The introduction of a micro-electronic based technology to the workplace has had a far reaching and widespread effect on the numbers and content of jobs. The importance of the implications of new technology were recognised by the trade unions, leading to a plethora of advice and literature in the late 70s and early 80s, notably the TUC 'Technology and Employment ' report. However, studies into the union response have consistently found an overall lack of influence by unions in the introduction of technology. Whilst the advent of new technology has coincided with an industrial relations climate of unprecedented hostility to union activity in the post-war period, there are structural weaknesses in unions in coming to terms with the process of technological change. In particular was the identification of a lack of suitable technological expertise. Addressing itself to this perceived weakness of the union response, this thesis is the outcome of a collaborative project between a national union and an academic institution. The thesis is based on detailed case studies concerning technology bargaining in the Civil Service and the response of the Civil and Public Services Associations (CPSA), the union that represents lower grade white collar civil servants. It is demonstrated that the application of expertise to union negotiators is insufficient on its own to extend union influence and that for unions to effectively come to terms with technology and influence its development requires a re-assessment across all spheres of union activity. It is suggested that this has repercussions for not only the internal organisation and quality of union policy formation and the extent, form and nature of collective bargaining with employer representatives, but also in the relationship with consumer and interest groups outside the traditional collective bargaining forum. Three policy options are developed in the thesis with the 'adversarial' and 'co~operative' options representing the more traditional reactive and passive forms of involvement. These are contrasted with an 'independent participative' form of involvement which was a 'pro-active' policy option and utilised the expertise of the Author in the CPSA's response to technological change.

Shaping the New Future of Paratransit : An Agenda for Research and Practice

The TRB-sponsored International Paratransit Conference, “Shaping the New Future of Paratransit”, held in Monterey, CA in the United States (US) in October 2014 represented the first coming together of the international paratransit community in conference format since 1997. The conference itself drew a worldwide attendance from a cross-section of operators, technology providers, policymakers and researchers. The presentations from the conference were organised around a number of themes which, when brought together, represented a substantial manifesto for the flexible and demand responsive transport community. This paper looks at a number of these themes with an analysis to highlight the key points and common strands of worldwide experience.

Dr. Bruce Voeller with partner at protest for passage of civil rights bill Intro 475

General note: Title and date provided by Bettye Lane. Digital reproduction

Gays protest outside of NY City Hall for passage of civil rights bill Intro 475

General note: Title and date provided by Bettye Lane.

Difficult Labor: Troublesome Company at the New Birth of Freedom

Extended contribution to a roundtable on Mark A. Lause's Free Labor: The Civil War and the Making of an American Working Class, emphasizing the wartime labor movement's great difficulty in responding to rapid industrialization brought on by the war, and to the increasing diversity of the labor force brought about by mass immigration.

Computational design of a new type of sandwich cross-section for a defined solution of a tree-like column produced by wire-and-arc additive manufacturing

When it comes to designing a structure, architects and engineers want to join forces in order to create and build the most beautiful and efficient building. From finding new shapes and forms to optimizing the stability and the resistance, there is a constant link to be made between both professions. In architecture, there has always been a particular interest in creating new shapes and types of a structure inspired by many different fields, one of them being nature itself. In engineering, the selection of optimum has always dictated the way of thinking and designing structures. This mindset led through studies to the current best practices in construction. However, both disciplines were limited by the traditional manufacturing constraints at a certain point. Over the last decades, much progress was made from a technological point of view, allowing to go beyond today's manufacturing constraints. With the emergence of Wire-and-Arc Additive Manufacturing (WAAM) combined with Algorithmic-Aided Design (AAD), architects and engineers are offered new opportunities to merge architectural beauty and structural efficiency. Both technologies allow for exploring and building unusual and complex structural shapes in addition to a reduction of costs and environmental impacts. Through this study, the author wants to make use of previously mentioned technologies and assess their potential, first to design an aesthetically appreciated tree-like column with the idea of secondly proposing a new type of standardized and optimized sandwich cross-section to the construction industry. Parametric algorithms to model the dendriform column and the new sandwich cross-section are developed and presented in detail. A catalog draft of the latter and methods to establish it are then proposed and discussed. Finally, the buckling behavior of this latter is assessed considering standard steel and WAAM material properties.

Brij Detergents Reveal New Aspects Of Membrane Microdomain In Erythrocytes.

Membrane microdomains enriched in cholesterol, sphingolipids (rafts), and specific proteins are involved in important physiological functions. However their structure, size and stability are still controversial. Given that detergent-resistant membranes (DRMs) are in the liquid-ordered state and are rich in raft-like components, they might correspond to rafts at least to some extent. Here we monitor the lateral order of biological membranes by characterizing DRMs from erythrocytes obtained with Brij-98, Brij-58, and TX-100 at 4 °C and 37 °C. All DRMs were enriched in cholesterol and contained the raft markers flotillin-2 and stomatin. However, sphingomyelin (SM) was only found to be enriched in TX-100-DRMs - a detergent that preferentially solubilizes the membrane inner leaflet - while Band 3 was present solely in Brij-DRMs. Electron paramagnetic resonance spectra showed that the acyl chain packing of Brij-DRMs was lower than TX-100-DRMs, providing evidence of their diverse lipid composition. Fatty acid analysis revealed that the SM fraction of the DRMs was enriched in lignoceric acid, which should specifically contribute to the resistance of SM to detergents. These results indicate that lipids from the outer leaflet, particularly SM, are essential for the formation of the liquid-ordered phase of DRMs. At last, the differential solubilization process induced by Brij-98 and TX-100 was monitored using giant unilamellar vesicles. This study suggests that Brij and TX-100-DRMs reflect different degrees of lateral order of the membrane microdomains. Additionally, Brij DRMs are composed by both inner and outer leaflet components, making them more physiologically relevant than TX-100-DRMs to the studies of membrane rafts.

A New Species Of Pseudopaludicola Miranda-ribeiro, 1926 (anura: Leptodactylidae: Leiuperinae) From Northwestern State Of São Paulo, Brazil.

A new species of Pseudopaludicola is described from human-altered areas originally covered by Semideciduous Forest in northwestern state of São Paulo, southeastern Brazil. Morphologically, the new species differs from four species belonging to the P. pusilla group by the absence of either T-shaped terminal phalanges or toe tips expanded, and from all other congeners except P. canga and P. facureae by possessing an areolate vocal sac, with dark reticulation. The higher duration (300-700 ms) of each single, pulsed note (9-36 nonconcatenated pulses) that compose the call in the new species distinguishes it from all other 14 species of Pseudopaludicola with calls already described (10-290 ms). Absence of harmonics also differ the advertisement call of the new species from the call of its sister species P. facureae, even though these two species presented unexpected low genetic distances. Although we could not identify any single morphological character distinguishing the new species from P. facureae, a PCA and DFA performed using 12 morphometric variables evidenced significant size differences between these two species. 

[the New Classification Of Breast Cancers: Finding The Luminal A].

To compare the distributions of patients with clinical-pathological subtypes of luminal B-like breast cancer according to the 2011 and 2013 St. Gallen International Breast Cancer Conference Expert Panel. We studied 142 women with breast cancer who were positive to estrogen receptor and had been treated in São Paulo state, southeast Brazil. The expression of the following receptors was assessed by immunohistochemistry: estrogen, progesterone (PR) and Ki-67. The expression of HER-2 was measured by fluorescent in situ hybridization analysis in tissue microarray. There were 29 cases of luminal A breast cancers according to the 2011 St. Gallen International Breast Cancer Conference Expert Panel that were classified as luminal B-like in the 2013 version. Among the 65 luminal B-like breast cancer cases, 29 (45%) were previous luminal A tumors, 15 cases (20%) had a Ki-67 >14% and were at least 20% PR positive and 21 cases (35%) had Ki-67 >14% and more than 20% were PR positive. The 2013 St. Gallen consensus updated the definition of intrinsic molecular subtypes and increased the number of patients classified as having luminal B-like breast cancer in our series, for whom the use of cytotoxic drugs will probably be proposed with additional treatment cost.

New Loci Of Lychnophora Ericoides And Transferability To Lychnophora Pinaster, Endangered Medicinal Species From Brazil.

Lychnophora ericoides and Lychnophora pinaster are species used in popular medicine as analgesic or anti-inflammatory agents to treat contusions, rheumatism, and insect bites. In this study, 21 simple sequence repeat loci of L. ericoides were developed and transferred to L. pinaster. Three populations of L. ericoides and 2 populations of L. pinaster were evaluated; they were collected in the State of Minas Gerais. Population parameters were estimated, and the mean values of observed and expected heterozygosity were 0.297 and 0.408 (L. ericoides) and 0.228 and 0.310 (L. pinaster), respectively. Greater genetic variability was observed within populations than between populations of L. ericoides (62 and 37%) and L. pinaster (97 and 2.8%). These results provide information for genetic conservation and taxonomic studies of these endangered species.

New Guidelines Of Cerebral Cardiopulmonary Resuscitation By The American Heart Association (2005 - 2006) [novas Diretrizes De Reanimação Cardiorrespiratória Cerebral Da Sociedade Americana De Cardiologia (2005 - 2006)]

No abstract available

Pulp tissue from primary teeth: new source of stem cells

SHED (stem cells from human exfoliated deciduous teeth) represent a population of postnatal stem cells capable of extensive proliferation and multipotential differentiation. Primary teeth may be an ideal source of postnatal stem cells to regenerate tooth structures and bone, and possibly to treat neural tissue injury or degenerative diseases. SHED are highly proliferative cells derived from an accessible tissue source, and therefore hold potential for providing enough cells for clinical applications. In this review, we describe the current knowledge about dental pulp stem cells and discuss tissue engineering approaches that use SHED to replace irreversibly inflamed or necrotic pulps with a healthy and functionally competent tissue that is capable of forming new dentin.