Rapid sample preparation procedure for As speciation in food samples by LC-ICP-MS

This paper describes a rapid method for arsenic (As) speciation by LC-ICP-MS in several types of food samples. Prior to analysis, samples were milled and the As species extracted from biological tissues by sonication in only 2 min with a solution containing MeOH (10%, v/v) plus HNO3 (2%, v/v). As species were separated by LC using an anion exchange column. Method detection limits for AsB, As3+,DMA, MMA and As5+ were 1.3, 0.9, 0.6, 0.7 and 0.8 ng g(-1), respectively. Method accuracy and precision were traceable to Certified Reference Materials SRM1577 bovine liver from the National Institute of Standards and Technology, CE278 mussel tissue from the Institute of Reference Materials and Measurements and DOLT-3 dogfish liver tissue and DORM-3 fish protein from the National Research Council of Canada. Finally, the method was applied to speciate As in food samples (egg, fish muscle, beef and chicken) purchased in Brazilian markets.

Caracterización del Acabado Superficial en la Industria Aeronautica y Aeroespacial - Desarrollo de Software Patrón de Referencia de Acuerdo a la Norma ISO 5436: VisualSR2D

This BSc thesis introduces the development of an independent, standalone software, VisualSR2D, for the characterization of software roughness. The software is written in Matlab, can be installed in any Windows OS as an standalone application and is available under request. It is intended to be an alternative for Softgauges (National Physical Laboratory, UK), RPTB (Physikalisch-Technische Bundesanstal, Germany) and SMATS (National Institute of Standards and Technology, USA) in the study of surface roughness. The standard ISO 5436-2 is presented, the above mentioned alternative developments are analyzed and compared, best practices are gathered, and finally, the development and functionality of VisualSR2D is presented.

STRBase: a short tandem repeat DNA database for the human identity testing community

The National Institute of Standards and Technology (NIST) has compiled and maintained a Short Tandem Repeat DNA Internet Database (http://www.cstl.nist.gov/biotech/strbase/) since 1997 commonly referred to as STRBase. This database is an information resource for the forensic DNA typing community with details on commonly used short tandem repeat (STR) DNA markers. STRBase consolidates and organizes the abundant literature on this subject to facilitate on-going efforts in DNA typing. Observed alleles and annotated sequence for each STR locus are described along with a review of STR analysis technologies. Additionally, commercially available STR multiplex kits are described, published polymerase chain reaction (PCR) primer sequences are reported, and validation studies conducted by a number of forensic laboratories are listed. To supplement the technical information, addresses for scientists and hyperlinks to organizations working in this area are available, along with the comprehensive reference list of over 1300 publications on STRs used for DNA typing purposes.

Model minimum performance specifications for police traffic radar devices.

Mode of access: Internet.

Caracterização elementar de ligas metálicas em implantes dentários

An ideal biomaterial for dental implants must have very high biocompatibility, which means that such materials should not provoke any serious adverse tissue response. Also, used metal alloys must have high fatigue resistance due the masticatory force and good corrosion resistance. These properties are rendered by using alpha and beta stabilizers, such as Al, V, Ni, Fe, Cr, Cu, Zn. Commercially pure titanium (TiCP) is used often for dental and orthopedic implants manufacturing. However, sometimes other alloys are employed and consequently it is essential to research the chemical elements present in those alloys that could bring prejudice for the health. Present work investigated TiCP metal alloys used for dental implant manufacturing and evaluated the presence of stabilizing elements within existing limits and standards for such materials. For alloy characterization and identification of stabilizing elements it was used EDXRF technique. This method allows to perform qualitative and quantitative analysis of the materials using the spectra of the characteristic X-rays emitted by the elements present in the metal samples. The experimental setup was based on two X- rays tubes (AMPTEK Mini X model with Ag and Au targets), a X-123SDD detector (AMPTEK) and a 0.5mm Cu collimator, developed due to the sample characteristics. The other experimental setup used as a complementary technique is composed of an X-ray tube with a Mo target, collimator 0.65mm and XFlash (SDD) detector - ARTAX 200 (BRUKER). Other method for elemental characterization by energy dispersive spectroscopy (EDS) applied in present work was based on Scanning Electron Microscopy (SEM) EVO® (Zeeis). This method also was used to evaluate the surface microstructure of the sample. The percentual of Ti obtained in the elementary characterization was among 93.35 ± 0.17% and 95.34 ± 0.19 %. These values are considered below the reference limit of 98.635% to 99.5% for TiCP, established by Association of metals centric materials engineers and scientists Society (ASM). The presence of elements Al and V in all samples also contributed to underpin the fact that are not TiCP implants. The values for Al vary between 6.3 ± 1.3% and 3.7 ± 2.0% and for V, between 0.26 ± 0.09% and 0.112 ± 0.048%. According to the American Society for Testing and Materials (ASTM), these elements should not be present in TiCP and in accordance with the National Institute of Standards and Technology (NIST), the presence of Al should be <0.01% and V should be of 0.009 ± 0.001%. Obtained results showed that implant materials are not exactly TiCP but, were manufactured using Ti-Al-V alloy, which contained Fe, Ni, Cu and Zn. The quantitative analysis and elementary characterization of experimental results shows that the best accuracy and precision were reached with X-Ray tube with Au target and collimator of 0.5 mm. Use of technique of EDS confirmed the results of EDXRF for Ti-Al-V alloy. Evaluating the surface microstructure by SEM of the implants, it was possible to infer that ten of the thirteen studied samples are contemporaneous, rough surface and three with machined surface.

Report on an investigation of the high speed hazards of steel belted radial tires on police cars : prepared for National Institute of Law Enforcement and Criminal Justice, Law Enforcement Assistance Administration, U.S. Department of Justice, Washington, D.C. ... /

Mode of access: Internet.

Computer security and the data encryption standard : proceedings of the Conference on Computer Security and the Data Encryption Standard held at the National Bureau of Standards in Gaithersburg, Maryland, on February 15, 1977 /

Mode of access: Internet.

Refrigeration for cryogenic sensors and electronic systems : proceedings of a conference held at the National Bureau of Standards, Boulder, CO, October 6-7, 1980 /

Item 247.

The National Biological Diversity Conservation and Environmental Research Act [microform] : hearings before the Subcommittee on Natural Resources, Agriculture Research, and Environment of the Committee on Science, Space, and Technology, U.S. House of Representatives, One Hundredth Congress, second session, June 9, 30, 1988.

"No. 143."

National Acid Precipitation Assessment Program [microform] : hearing before the Subcommittee on Natural Resources, Agriculture Research, and Environment of the Committee on Science, Space, and Technology, U.S. House of Representatives, One Hundredth Congress, second session, April 27, 1988.

"No. 125."

Manual for the construction and maintenance of skid surfaces corresponding to those prepared by Texas Transportation Institute under National Bureau of Standards contract CST-451. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Automation technology applied to public service : proceedings of a Conference on Automation Technology Applied to Public Service, held at the National Bureau of Standards, Gaithersburg, Maryland, May 21-22, 1974 /

Mode of access: Internet.

Computers and mathematical programming : proceedings of the Bicentennial Conference on Mathematical Programming held at the National Bureau of Standards, Gaithersburg, Maryland, November 29-December 1, 1976 /

Includes bibliographies.

Methods and Standards for Environmental Measurement : abstracts of papers included in the 8th Materials Research Symposium, September 20-24, 1976, National Bureau of Standards, Gaithersburg, Md.

Sponsored by National Bureau of Standards, Institute for Materials Research, Office of Air and Water Measurement.

Oversight--Public Law 96-479--National Material and Minerals Policy, R. & D. Act of 1980 and consideration of H.R. 4281--Critical Materials Act of 1981 [microform] : hearings before the Subcommittee on Transportation, Aviation, and Materials and the Subcommittee on Science, Research, and Technology of the Committee on Science and Technology, U.S. House of Representatives, Ninety-seventh Congress, second session, April 20, 22, 1982.

"No. 117."