Alocação de atividades produtivas e tecnológicas em subsidiárias de empresasa multinacionais: o caso da indústria de máquinas agrícolas

O presente trabalho avalia a interação usuário-produtor na Indústria de Máquinas Agrícolas (IMA) e procura demonstrar como esse padrão interativo promove a descentralização das atividades inovativas do setor, com enfoque no caso brasileiro. O Estudo de Caso das empresas multinacionais (Deere & Co, CNH Global NV e AGCO Corp.) corrobora a hipótese do desenvolvimento de projetos em território brasileiro com predominância de projetos de caráter derivativo

Abordagem multivariada na análise de diversidade genética em cruzamentos para alto teor de óleo em soja

The soybean crop is considered a high expression around the world. In plant breeding programs, knowledge of genetic diversity is extremely important and in this context, are frequently used multivariate analyzes. Thus, the aim of the present study was to evaluate the genetic divergence between soybean crosses through multivariate techniques. In total, 16 crosses were evaluated, which were in the F2 generation of inbreeding. The evaluated characteristics were plant height at maturity, height of the first pod, number of branches per plant, number of pods per plant, number of nodes per plant, hundred seed weight, grain yield and oil content. For the analyzes was used Euclidean distance, methods of hierarchical clustering UPGMA and Ward and principal component analysis. Genetic distances estimated using Euclidean distance ranged from 1.24 to 8.13, with the smallest distance observed between crosses C1 and C4, and the greatest distance between the C2 crosses and C6. The methods UPGMA clustering and Ward met crossings in five different groups. The principal component analysis explained 86.2% of the variance contained in the original eight variables with three main components. The APM characters, NV, NR, NN, PG% and oil were the main contributors to genetic divergence among traits. Multivariate techniques were crucial to the analysis of genetic diversity, and the methods of Ward and UPGMA clustering and principal components have consistent results in this way, the simultaneous use of these tools in genetic analysis of crosses is indicated

Análise de variáveis eletromiográficas e cinemáticas em protocolo incremental de corrida na esteira

Muscle fatigue is described as a cause of injuries among the many related to the running practice. Therefore, the purpose of this study was to analyze the behavior of the amplitude (RMS) and median frequency (MF) of EMG signal of the iliocostalis (CI), rectus femoris (RF), vastus lateralis (VL), vastus medialis (VM) biceps femoris (long head) (BFCL), tibialis anterior (TA) and gastrocnemius (lateral) (LNG) from the right lower limb, and the behavior of the parameters of amplitude (AP) and frequency (PF) spent in different percentages of the maximum speed during incremental protocol of treadmill running. 10 volunteers participated in this study, athletes, male, aged between 18 and 30 years with no history of injury in lower limbs and similar anthropometry. The protocol consisted of a treadmill test with initial velocity of 10 km.h-¹ and increments of 1 km.h-¹ each three minutes until volitional exhaustion, without rest interval. Synchronized collections were made of electromyographic and kinematic data. The signals were obtained through an acquisition module of biological signals (Telemyo 900 - Noraxon - USA) and software (Myoresearch - Noraxon - USA) calibrated with a sampling frequency of 1000 Hz, gain 2000 times. The raw data were filtered with a 60Hz notch filter, high pass and low pass 20Hz to 500Hz. To capture the image was used a digital video recorder (model NV-GS320, PANASONIC brand), and for image scanning and kinematic data collection was used the software Peak Motus 9.0 (ViconPeak). To obtain the values of RMS and FM analyzed the last ten passes of each speed through a specific routine (Matlab). To obtain these variables AP (m) and FP (stride I min) were analyzed for the last ten past each speed, using specific software (Peak Motus 9.0). After verification of data normality (Shapiro-Wilk) and homogeneity of the data (Levene), the comparison ...(Complete abstract click electronic access below)

Determinação da crítica razão esforço pausa (e:pcrit) em uchi-komi no judô, utilizando deltas de variação de freqüência cardíaca e escala de percepção de esforço de Borg

O presente estudo objetivou verificar a validade de um protocolo de teste aeróbio específico do judô (técnica ipon-seoi-nague), não exaustivo, adaptado do método de CHASSAIN (1986), utilizando deltas de variações da escala de percepção de Borg e da freqüência cardíaca em atletas bem treinados. O teste adaptado ao judô constituiu de quatro séries de exercício com dois esforços iguais (duplos) de 180 segundos com um intervalo de 90 segundos entre eles. As séries de exercícios foram realizadas em dias consecutivos. As intensidades dos testes duplos foram de 85%, 95%,105% e 115% do lactato mínimo para cada participante. Este trabalho utilizou a técnica ipon-seoi-nague, sendo que as razões esforço-pausa foram específicas para cada atleta, e correspondem às intensidades de exercício propostas pelo protocolo de Chassain (1986). A escala de percepção de esforço de Borg foi mostrada ao final do primeiro e do segundo esforços, em cada uma das séries, para que o atleta determinasse o nível de cansaço. Para análise da freqüência cardíaca foi utilizado um freqüencímetro, Polar Vantage NV, obtendo freqüência cardíaca concomitantemente a escala de Borg, ao final de bloco de esforço. Dessa maneira, foram obtidos dois deltas de variações entre o primeiro e o segundo esforços, para escala de percepção de Borg (ΔBORG) e FC (ΔFC). Uma vez que foram utilizadas quatro intensidades, foi possível determinar quatro ΔBORG e quatro ΔFC. Assim, a partir de duas regressões lineares (uma para o Borg e outra para a FC), foi possível determinar as razões esforço:pausas críticas do exercício na técnica específica do Judô, a partir da determinação das intensidades nas quais a variação de Borg e da FC foi igual a zero (ΔBORG=0 e ΔFC=0). Para validar esses procedimentos adaptados de Chassain (1986) ao Judô, foi realizado o teste de Lactato Mínimo Adaptado, conforme sugerido por Azevedo (2002).

Estratégias de seleção de genótipos de soja por meio de modelos mistos e abordagens multivariadas

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

The crystal field strength parameter and the maximum splitting of the 7F1 manifold of the Eu3+ ion in oxides

We examine, from both the experimental and theoretical point of view, the behavior of the maximum splitting ΔE, of the 7F1 manifold of the Eu3+ ion as a function of the so-called crystal field strength parameter, Nv, in a series of oxides. In connection with the original theory that describes the relation between ΔE and Nv, a more consistent procedure to describe this relation is presented for the cases of small total angular momentum J. Good agreement is found between theory and experiment. © 1995.

Estudo do efeito modulador do macrolídeo tilosina na reação inflamatória aguda de tilápias do Nilo (Oreochromis niloticus), vacinadas e desafiadas com Streptococcus agalactiae

Pós-graduação em Medicina Veterinária - FCAV

Impact of Land Degradation on Soil Microbial Biomass and Activity in Northeast Brazil

Land degradation causes great changes in the soil biological properties. The process of degradation may decrease soil microbial biomass and consequently decrease soil microbial activity. The study was conducted out during 2009 and 2010 at the four sites of land under native vegetation (NV), moderately degraded land (LDL), highly degraded land (HDL) and land under restoration for four years (RL) to evaluate changes in soil microbial biomass and activity in lands with different degradation levels in comparison with both land under native vegetation and land under restoration in Northeast Brazil. Soil samples were collected at 0-10 cm depth. Soil organic carbon (SOC), soil microbial biomass C (MBC) and N (MBN), soil respiration (SR), and hydrolysis of fluorescein diacetate (FDA) and dehydrogenase (DHA) activities were analyzed. After two years of evaluation, soil MBC, MBN, FDA and DHA had higher values in the NV, followed by the RL. The decreases of soil microbial biomass and enzyme activities in the degraded lands were approximately 8-10 times as large as those found in the NV. However, after land restoration, the MBC and MBN increased approximately 5-fold and 2-fold, respectively, compared with the HDL. The results showed that land degradation produced a strong decrease in soil microbial biomass. However, land restoration may promote short- and long-term increases in soil microbial biomass.

Smile detection for user interfaces

[EN]Perceptual User Interfaces (PUIs) aim at facilitating human-computer interaction with the aid of human-like capacities (computer vision, speech recognition, etc.). In PUIs, the human face is a central element, since it conveys not only identity but also other important information, particularly with respect to the user’s mood or emotional state. This paper describes both a face detector and a smile detector for PUIs. Both are suitable for real-time interaction.

Atomic-scale characterization of diamond surfaces and fullerene self-assembly

In this thesis, elemental research towards the implantation of a diamond-based molecular quantum computer is presented. The approach followed requires linear alignment of endohedral fullerenes on the diamond C(100) surface in the vicinity of subsurface NV-centers. From this, four fundamental experimental challenges arise: 1) The well-controlled deposition of endohedral fullerenes on a diamond surface. 2) The creation of NV-centers in diamond close to the surface. 3) Preparation and characterization of atomically-flat diamondsurfaces. 4) Assembly of linear chains of endohedral fullerenes. First steps to overcome all these challenges were taken in the framework of this thesis. Therefore, a so-called “pulse injection” technique was implemented and tested in a UHV chamber that was custom-designed for this and further tasks. Pulse injection in principle allows for the deposition of molecules from solution onto a substrate and can therefore be used to deposit molecular species that are not stable to sublimation under UHV conditions, such as the endohedral fullerenes needed for a quantum register. Regarding the targeted creation of NV-centers, FIB experiments were carried out in cooperation with the group of Prof. Schmidt-Kaler (AG Quantum, Physics Department, Johannes Gutenberg-Universität Mainz). As an entry into this challenging task, argon cations were implanted into (111) surface-oriented CaF2 crystals. The resulting implantation spots on the surface were imaged and characterized using AFM. In this context, general relations between the impact of the ions on the surface and their valency or kinetic energy, respectively, could be established. The main part of this thesis, however, is constituted by NCAFM studies on both, bare and hydrogen-terminated diamond C(100) surfaces. In cooperation with the group of Prof. Dujardin (Molecular Nanoscience Group, ISMO, Université de Paris XI), clean and atomically-flat diamond surfaces were prepared by exposure of the substrate to a microwave hydrogen plasma. Subsequently, both surface modifications were imaged in high resolution with NC-AFM. In the process, both hydrogen atoms in the unit cell of the hydrogenated surface were resolved individually, which was not achieved in previous STM studies of this surface. The NC-AFM images also reveal, for the first time, atomic-resolution contrast on the clean, insulating diamond surface and provide real-space experimental evidence for a (2×1) surface reconstruction. With regard to the quantum computing concept, high-resolution NC-AFM imaging was also used to study the adsorption and self-assembly potential of two different kinds of fullerenes (C60 and C60F48) on aforementioned diamond surfaces. In case of the hydrogenated surface, particular attention was paid to the influence of charge transfer doping on the fullerene-substrate interaction and the morphology emerging from self-assembly. Finally, self-assembled C60 islands on the hydrogen-terminated diamond surface were subject to active manipulation by an NC-AFM tip. Two different kinds of tip-induced island growth modes have been induced and were presented. In conclusion, the results obtained provide fundamental informations mandatory for the realization of a molecular quantum computer. In the process it was shown that NC-AFM is, under proper circumstances, a very capable tool for imaging diamond surfaces with highest resolution, surpassing even what has been achieved with STM up to now. Particular attention was paid to the influence of transfer doping on the morphology of fullerenes on the hydrogenated diamond surface, revealing new possibilities for tailoring the self-assembly of molecules that have a high electron affinity.

Synthesis and two-photon photolysis of 6-(ortho-nitroveratryl)-caged IP3 in living cells

The synthesis of a photolabile derivative of inositol-1,4,5-trisphosphate (IP3) is described. This new caged second messenger (6-ortho-nitroveratryl)-IP3 (6-NV-IP3) has an extinction coefficient of 5000 M(-1) cm(-1) at 350 nm, and a quantum yield of photolysis of 0.12. Therefore, 6-NV-IP3 is photolyzed with UV light about three times more efficiently than the widely used P(4(5))-1-(2-nitrophenyl)ethyl-caged IP3 (NPE-IP3). 6-NV-IP3 has a two-photon cross-section of about 0.035 GM at 730 nm. This absorbance is sufficiently large for effective two-photon excitation in living cells at modest power levels. Using near-IR light (5 mW, 710 nm, 80 MHz, pulse-width 70 fs), we produced focal bursts of IP3 in HeLa cells, as revealed by laser-scanning confocal imaging of intracellular Ca2+ concentrations. Therefore, 6-NV-IP3 can be used for efficient, subcellular photorelease of IP3, not only in cultured cells but also, potentially, in vivo. It is in the latter situation that two-photon photolysis should reveal its true forte.

Fossil bubble in porphyritic basaltic pyroclasts produced by small and large strombolian eruption at Pacaya, Guatemala

We investigate compositionally monotonous, but energetically diverse, tephra samples from Pacaya to see if fossil bubbles in pyroclasts could reflect eruptive style. Bubble size distributions (BSD) were determined for four ash to lapilli size tephra samples using an adapted version of stereology conversion by Sahagian and Proussevitch (1998). Eruptions range from very weak to very energetic. Hundreds of ESEM BSEs images were processed throughout ImageJ software for a robust and statistically correct data set of vesicles (minimum 700 bubbles per sample). Qualitative textural analysis and major element chemical compositions were also executed. There is higher vesicularity for explosive pyroclasts and an inverse correlation between bubble number density (NV) and explosivity.