Modified release of beclometasone dipropionate from chitosan-basedd spray-dried respirable powders

Dry powders for inhalation were prepared by spray drying a 30% v/v aqueous ethanol formulation containing beclometasone dipropionate (BDP), lactose, leucine and chitosan (low, medium or high molecular weight (MW), or combinations thereof). Following physical characterisation of the powders, the aerosolisation and dissolution properties of the powders were investigated using Multi-Stage Liquid Impinger and USP II dissolution apparatus, respectively. The powders were highly dispersible, with emitted doses in excess of 90% of loaded powder aerosolised from a Spinhaler dry powder inhaler. The fine particle fraction (FPF) was observed to decrease, whereas the time for 100% drug release increased, with increasing chitosan MW. For example, the low MW formulation exhibited an FPF of 64% and a 100% dissolution time of 2 h, whereas the high MW formulation demonstrated an FPF of 54% and a dissolution time of 12 h. These powders would be anticipated to deposit predominately in the lower regions of the lung following inhalation, and then undergo delayed rather than instantaneous drug release, offering the potential to reduce dosing frequency and improve patient compliance. (c) 2008 Elsevier B.V. All rights reserved.

Chitosan-based spray-dried respirable powders for sustained delivery of terbutaline sulfate

In this study, we describe the preparation of highly dispersible dry powders for pulmonary drug delivery that display sustained drug release characteristics. Powders were prepared by spray-drying 30% v/v aqueous ethanol formulations containing terbutaline sulfate as a model drug, chitosan as a drug release modifier and leucine as an aerosolisation enhancer. The influence of chitosan molecular weight on the drug release profile was investigated by using low, medium and high molecular weight chitosan or combinations thereof. Following spray-drying, resultant powders were characterised using scanning electron microscopy, laser diffraction, tapped density analysis, differential scanning calorimetry and thermogravitational analysis. The in vitro aerosolisation performance and drug release profile were investigated using Multi-Stage Liquid Impinger analysis and modified USP II dissolution apparatus, respectively. The powders generated were of a suitable aerodynamic size for inhalation, had low moisture content and were amorphous in nature. The powders were highly dispersible, with emitted doses of over 90% and fine particle fractions of up to 82% of the total loaded dose, and mass median aerodynamic diameters of less than 2.5microm. A sustained drug release profile was observed during dissolution testing; increasing the molecular weight of the chitosan in the formulation increased the duration of drug release. (c)2007 Elsevier B.V. All rights reserved.

The use of spot simulation imagery for forestry mapping and management

SPOT simulation imagery was acquired for a test site in the Forest of Dean in Gloucestershire, U.K. This data was qualitatively and quantitatively evaluated for its potential application in forest resource mapping and management. A variety of techniques are described for enhancing the image with the aim of providing species level discrimination within the forest. Visual interpretation of the imagery was more successful than automated classification. The heterogeneity within the forest classes, and in particular between the forest and urban class, resulted in poor discrimination using traditional `per-pixel' automated methods of classification. Different means of assessing classification accuracy are proposed. Two techniques for measuring textural variation were investigated in an attempt to improve classification accuracy. The first of these, a sequential segmentation method, was found to be beneficial. The second, a parallel segmentation method, resulted in little improvement though this may be related to a combination of resolution in size of the texture extraction area. The effect on classification accuracy of combining the SPOT simulation imagery with other data types is investigated. A grid cell encoding technique was selected as most appropriate for storing digitised topographic (elevation, slope) and ground truth data. Topographic data were shown to improve species-level classification, though with sixteen classes overall accuracies were consistently below 50%. Neither sub-division into age groups or the incorporation of principal components and a band ratio significantly improved classification accuracy. It is concluded that SPOT imagery will not permit species level classification within forested areas as diverse as the Forest of Dean. The imagery will be most useful as part of a multi-stage sampling scheme. The use of texture analysis is highly recommended for extracting maximum information content from the data. Incorporation of the imagery into a GIS will both aid discrimination and provide a useful management tool.

Do ethics imply persistence? The case of Islamic and socially responsible funds

We analyse the performance persistence of Islamic and Socially Responsible Investment (SRI) mutual funds. We adopt a multi-stage strategy in which, in the first stage, partial frontiers’ approaches are considered to measure the performance of the different funds in the sample. In the second stage, the results yielded by the partial frontiers are plugged into different investment strategies based on a recursive estimation methodology whose persistence performance is evaluated in the third stage of the analysis. Results indicate that, for both types of funds, performance persistence actually exists, but only for the worst and, most notably, best funds. This result is robust not only across methods (and different choices of tuning parameters within each method) but also across both SRI and Islamic funds—although in the case of the latter persistence was stronger for the best funds. The persistence of SRI and Islamic funds represents an important result for investors and the market, since it provides information on both which funds to invest in and which funds to avoid. Last but not least, the use of the aforementioned techniques in the context of mutual funds could also be of interest for the non-conclusive literature.

Advanced tilted fiber gratings and their applications

This thesis presents a detailed numerical analysis, fabrication method and experimental investigation on 45º tilted fiber gratings (45º-TFGs) and excessively tilted fiber gratings (Ex-TFGs), and their applications in fiber laser and sensing systems. The one of the most significant contributions of the work reported in this thesis is that the 45º-TFGs with high polarization extinction ratio (PER) have been fabricated in single mode telecom and polarization maintaining (PM) fibers with spectral response covering three prominent optic communication and central wavelength ranges at 1060nm, 1310nm and 1550nm. The most achieved PERs for the 45º-TFGs are up to and greater than 35-50dB, which have reached and even exceeded many commercial in-fiber polarizers. It has been proposed that the 45º-TFGs of high PER can be used as ideal in-fiber polarizers for a wide range of fiber systems and applications. In addition, in-depth detailed theoretical models and analysis have been developed and systematic experimental evaluation has been conducted producing results in excellent agreement with theoretical modeling. Another important outcome of the research work is the proposal and demonstration of all fiber Lyot filters (AFLFs) implemented by utilizing two (for a single stage type) and more (for multi-stage) 45º-TFGs in PM fiber cavity structure. The detailed theoretical analysis and modelling of such AFLFs have also been carried out giving design guidance for the practical implementation. The unique function advantages of 45º-TFG based AFLFs have been revealed, showing high finesse multi-wavelength transmission of single polarization and wide range of tuneability. The temperature tuning results of AFLFs have shown that the AFLFs have 60 times higher thermal sensitivity than the normal FBGs, thus permitting thermal tuning rate of ~8nm/10ºC. By using an intra-cavity AFLF, an all fiber soliton mode locking laser with almost total suppression of siliton sidebands, single polarization output and single/multi-wavelength switchable operation has been demonstrated. The final significant contribution is the theoretical analysis and experimental verification on the design, fabrication and sensing application of Ex-TFGs. The Ex-TFG sensitivity model to the surrounding medium refractive index (SRI) has been developed for the first time, and the factors that affect the thermal and SRI sensitivity in relation to the wavelength range, tilt angle, and the size of cladding have been investigated. As a practical SRI sensor, an 81º-TFG UV-inscribed in the fiber with small (40μm) cladding radius has shown an SRI sensitivity up to 1180nm/RIU in the index of 1.345 range. Finally, to ensure single polarization detection in such an SRI sensor, a hybrid configuration by UV-inscribing a 45º-TFG and an 81º-TFG closely on the same piece of fiber has been demonstrated as a more advanced SRI sensing system.

The effectiveness of workplace coaching:A meta-analysis of learning and performance outcomes; scale development; theoretical model of individual differences and longitudinal study

The extant literature on workplace coaching is characterised by a lack of theoretical and empirical understanding regarding the effectiveness of coaching as a learning and development tool; the types of outcomes one can expect from coaching; the tools that can be used to measure coaching outcomes; the underlying processes that explain why and how coaching works and the factors that may impact on coaching effectiveness. This thesis sought to address these substantial gaps in the literature with three linked studies. Firstly, a meta-analysis of workplace coaching effectiveness (k = 17), synthesizing the existing research was presented. A framework of coaching outcomes was developed and utilised to code the studies. Analysis indicated that coaching had positive effects on all outcomes. Next, the framework of outcomes was utilised as the deductive start-point to the development of the scale measuring perceived coaching effectiveness. Utilising a multi-stage approach (n = 201), the analysis indicated that perceived coaching effectiveness may be organised into a six factor structure: career clarity; team performance; work well-being; performance; planning and organizing and personal effectiveness and adaptability. The final study was a longitudinal field experiment to test a theoretical model of individual differences and coaching effectiveness developed in this thesis. An organizational sample of 84 employees each participated in a coaching intervention, completed self-report surveys, and had their job performance rated by peers, direct reports and supervisors (a total of 352 employees provided data on participant performance). The results demonstrate that compared to a control group, the coaching intervention generated a number of positive outcomes. The analysis indicated that coachees’ enthusiasm, intellect and orderliness influenced the impact of coaching on outcomes. Mediation analysis suggested that mastery goal orientation, performance goal orientation and approach motivation in the form of behavioural activation system (BAS) drive, were significant mediators between personality and outcomes. Overall, the findings of this thesis make an original contribution to the understanding of the types of outcomes that can be expected from coaching, and the magnitude of impact coaching has on outcomes. The thesis also provides a tool for reliably measuring coaching effectiveness and a theoretical model to understand the influence of coachee individual differences on coaching outcomes.

Sustained delivery of salbutamol and beclometasone from spray-dried double emulsions

The sustained delivery of multiple agents to the lung offers potential benefits to patients. This study explores the preparation of highly respirable dual-loaded spray-dried double emulsions. Spray-dried powders were produced from water-in-oil-in-water (w/o/w) double emulsions, containing salbutamol sulphate and/or beclometasone dipropionate in varying phases. The double emulsions contained the drug release modifier polylactide co-glycolide (PLGA 50 : 50) in the intermediate organic phase of the original micro-emulsion and low molecular weight chitosan (Mw<190 kDa: emulsion stabilizer) and leucine (aerosolization enhancer) in the tertiary aqueous phase. Following spray-drying resultant powders were physically characterized: with in vitro aerosolization performance and drug release investigated using a Multi-Stage Liquid Impinger and modified USP II dissolution apparatus, respectively. Powders generated were of a respirable size exhibiting emitted doses of over 95% and fine particle fractions of up to 60% of the total loaded dose. Sustained drug release profiles were observed during dissolution for powders containing agents in the primary aqueous and secondary organic phases of the original micro-emulsion; the burst release of agents was witnessed from the tertiary aqueous phase. The novel spray-dried emulsions from this study would be expected to deposit and display sustained release character in the lung.

The use of sodium carboxymethylcellulose in the preparation of spray-dried proteins for pulmonary drug delivery

The use of sodium carboxymethylcellulose (NaCMC) as a spray-drying excipient in the preparation of inhalable formulations of proteins was investigated, using alkaline phosphatase as a model functional protein. Two spray-dried powders were investigated: a control powder comprising 100% (w/w) alkaline phosphatase and a test powder comprising 67% (w/w) NaCMC and 33% (w/w) alkaline phosphatase. Following physicochemical characterisation, the powders were prepared as both dry powder inhaler (DPI) and pressurised metered dose inhaler (pMDI) formulations. The aerosolisation performance of the formulations was assessed using a Multi-Stage Liquid Impinger, both immediately after preparation and over a 16-week storage period. Formulating the control powder as a DPI resulted in a poor fine particle fraction (FPF: 10%), whereas the FPF of the NaCMC-modified DPI formulation was significantly greater (47%). When the powders were formulated as pMDI systems, the control and NaCMC-modified powders demonstrated FPFs of 52% and 55%, respectively. Following storage, reduced FPF was observed for all formulations except the NaCMC-modified pMDI system; the performance of this formulation following storage was statistically equivalent to that immediately following preparation. Co-spray-drying proteins and peptides with NaCMC may therefore offer an alternative method for the preparation of stable and respirable pMDI formulations for pulmonary delivery. © 2010 Elsevier B.V.

Differential outcomes of two -way and transitional programs on English language learners at different entry levels

This study investigated the effects of two types of bilingual education programs (two-way and transitional) on the academic performance, attitudes, and metacognitive awareness of 5th grade students who entered kindergarten or first grade with different levels of English proficiency. The multi-stage sample consisted of students who had participated in each program for a period of at least five years. A mixed model design allowed for the collection of quantitative and qualitative data that were analyzed accordingly and integrated. ^ The findings indicated no significant differences between the two groups on measures of academic achievement in English. Significant differences were found in the number of semesters required for the students to become proficient English speakers. An important conclusion, based on these findings, was that the students enrolled in the two-way bilingual education (TWBE) programs learned English faster. Moreover, they maintained a high level of proficiency in Spanish, scoring significantly higher than the transitional bilingual education group on measures of Spanish reading ability.^ Questionnaire and interview data indicated that the students in the two-way bilingual education programs tended to use more Spanish for recreational purposes and tended to rate themselves as more proficient Spanish speakers than their peers. Conversely, the students enrolled in the transitional bilingual education programs tended to rate themselves as more proficient in English than their peers. ^ The level of English language proficiency upon entering school (five years later) was found to make a difference in academic achievement, as measured by standardized tests. Five years of schooling did not fully eliminate the gap in academic performance between students with different ESOL entry levels at kindergarten. However, entry level did not have an effect on attitudes towards bilingualism. ^ It is concluded that, although there was no significant difference between the two groups on measures of academic achievement in English, TWBE and transitional programs have differential effects. Students in the TWBE programs acquired oral language at a faster rate, developed literacy skills in their native language, and acquired more positive attitudes towards bilingualism. Theoretical, methodological, and policy implications of the findings are discussed. ^

Prevalência e fatores associados à morbidade materna: inquérito populacional em Natal/RN

INTRODUCTION: Severe maternal morbidity , also known as maternal near miss , has been used as an alternative to the study of maternal mortality , since being more frequent shares the same determinants and enables the implementati on of epidem iological surveillance of cases . Since then, hospital audits ha ve been carried out to determine the rates of maternal near miss, its mai n causes and associated factors . More recently, population surveys based on self - reported morbidity have als o been presented as vi able in identifying these cases . OBJECTIVE: The aim of this study was to determine the prevalence and associated factors of maternal near miss and complications during pregnancy and puerperal period in Natal/RN. METHODS: A cross - secti onal population - based study was conducted in Natal /RN , Brazil, which has as its target population women aged 15 to 49 years who were pregnant in the last five years. It was carried out a probabilistic sam pling design based on a multi - stage complex sample , in which 60 census tracts were selected from three strata (north , south - east and west). Afterwards, domiciles were visited in order to obtain a sample of the 908 eligible women in whom a questionnaire was applied. The descriptive analyzes and bivariate ass ociations were performed using the Chi - square test and the estimate of the prevalence ratio (PR ) with 95% confidence interval (CI) and considering the weights and design effects . The Poisson regression analysis , also with 5% significance and 95% CI, was us ed for analyzes of associated factors. RESULTS: 848 women were identified and interviewed after visits in 8.227 households corresponding to a response rate of 93 . 4 %. The prevalence of maternal near miss was 41 . 1 /1 000NV, being the Intensive Care Unity stay i ng (19 . 1 /1 000 LB ) and eclampsia (13 . 5/1000LB) the most important marker s . The prevalence of complications in the puerperal peri od was 21 . 2 %, and hemorrhage (10 . 7%) and urinary tract infection (10 . 7%) the most frequently reported clinical conditions and rema in ing in the hospital for over a week after delivery the mo st frequent intervention (5.4%) . Regarding associated factors , the bivariate analysis showed an association between the increased number of complications in women of black/brown race ( PR= 1 . 23; CI95 % : 1 . 04 - 1 . 46) and lower socioeconomic status ( PR= 1 . 33; CI95%: 1 . 12 - 1 . 58) in women who had pre natal care in public service ( PR= 1 . 42; CI95%: 1 . 16 to 1 . 72 ) and that were not advised during prenatal about where they should do the d elivery (PR= 1 . 24; CI95%: 1 . 05 - 1 . 46), made the del ivery in the public service (PR= 1 . 63; CI95%: 1 . 30 - 2 . 03), had to search for more than one hospital for delivery (PR=1 . 22; CI95%: 1 . 03 - 1 . 45) and had no companion during childbirth ( PR =1 . 19; CI95%: 1 . 01 - 1 . 41) or at all times of childbirth c are - before, during and after childbirth - ( PR= 1 . 25, CI95%: 1 . 05 - 1 . 48) . Moreover, the number of days postpartum hospitalization was higher in women who had more complications (P R= 1 . 59 ; CI95%: 1 . 36 - 1 . 86). In the final regression model for both birth place (P R= 1 . 21 ; CI 95% : 1 . 02 to 1 . 44 ) and socioeconomic status (PR = 1.54 ; CI95%: 1 . 25 - 1 . 90 ) the association remained. CONCLUSION : Conducting population surveys using the pragmatic definition of near miss is feasible and may add importa nt information about this ev ent . It was possible to find the expression of health inequalities related to maternal health in the analysis of both socioeconomic conditions and on the utilization of health services.

Prevalência e fatores associados ao Near Miss Materno: inquérito populacional em uma capital do Nordeste Brasileiro

The scope of this study was to determine the prevalence of near misses and complications during pregnancy and the puerperal period, identifying the main clinical and intervention markers and socioeconomic and demographic factors associated with near misses. It involved a cross-sectional, population-based and probabilistic study with multi-stage complex sampling design conducted in Natal, State of Rio Grande do Norte, Brazil. A validated questionnaire was given to 848 women aged 15 to 49 identified in 8,227 households in 60 census sectors. In theanalysis of associations, the Chi-square test applied and calculated the prevalence ratio (PR) with Confidence Interval (CI) of 95% and 5% significance. The prevalence of maternal near misses was 41.1/1000LB, with hospitalization in an Intensive Care Unit (19.1/1000LB) and eclampsia (13.5/1000LB) being the most important markers. The prevalence of complications during pregnancy and the puerperal period was 21.2%. The highest prevalence of near misses was observed in older women, of black/brown race and low socioeconomic status. Conducting population surveys is feasible and may add important information to the study of near misses and the markers highlight the need for enhancing maternal care to reduce health inequality.

Prevalência e fatores associados ao Near Miss Materno: inquérito populacional em uma capital do Nordeste Brasileiro

The scope of this study was to determine the prevalence of near misses and complications during pregnancy and the puerperal period, identifying the main clinical and intervention markers and socioeconomic and demographic factors associated with near misses. It involved a cross-sectional, population-based and probabilistic study with multi-stage complex sampling design conducted in Natal, State of Rio Grande do Norte, Brazil. A validated questionnaire was given to 848 women aged 15 to 49 identified in 8,227 households in 60 census sectors. In theanalysis of associations, the Chi-square test applied and calculated the prevalence ratio (PR) with Confidence Interval (CI) of 95% and 5% significance. The prevalence of maternal near misses was 41.1/1000LB, with hospitalization in an Intensive Care Unit (19.1/1000LB) and eclampsia (13.5/1000LB) being the most important markers. The prevalence of complications during pregnancy and the puerperal period was 21.2%. The highest prevalence of near misses was observed in older women, of black/brown race and low socioeconomic status. Conducting population surveys is feasible and may add important information to the study of near misses and the markers highlight the need for enhancing maternal care to reduce health inequality.

Aspectos metodológicos do Projeto SBBrasil 2010 de interesse para inquéritos nacionais de saúde

The SBBrasil 2010 Project (SBB10) was designed as a nationwide oral health epidemiological survey within a health surveillance strategy. This article discusses methodological aspects of the SBB10 Project that can potentially help expand and develop knowledge in the health field. This was a nationwide survey with stratified multi-stage cluster sampling. The sample domains were 27 State capitals and 150 rural municipalities (counties) from the country's five major geographic regions. The sampling units were census tracts and households for the State capitals and municipalities, census tracts, and households for the rural areas. Thirty census tracts were selected in the State capitals and 30 municipalities in the countryside. The precision considered the demographic domains grouped by density of the overall population and the internal variability of oral health indices. The study evaluated dental caries, periodontal disease, malocclusion, fluorosis, tooth loss, and dental trauma in five age groups (5, 12, 15-19, 35-44, and 65-74 years).

Aspectos metodológicos do Projeto SBBrasil 2010 de interesse para inquéritos nacionais de saúde

The SBBrasil 2010 Project (SBB10) was designed as a nationwide oral health epidemiological survey within a health surveillance strategy. This article discusses methodological aspects of the SBB10 Project that can potentially help expand and develop knowledge in the health field. This was a nationwide survey with stratified multi-stage cluster sampling. The sample domains were 27 State capitals and 150 rural municipalities (counties) from the country's five major geographic regions. The sampling units were census tracts and households for the State capitals and municipalities, census tracts, and households for the rural areas. Thirty census tracts were selected in the State capitals and 30 municipalities in the countryside. The precision considered the demographic domains grouped by density of the overall population and the internal variability of oral health indices. The study evaluated dental caries, periodontal disease, malocclusion, fluorosis, tooth loss, and dental trauma in five age groups (5, 12, 15-19, 35-44, and 65-74 years).

Optical properties of chiral thin films and microparticles

In this work I study the optical properties of helical particles and chiral sculptured thin films, using computational modeling (discrete dipole approximation, Berreman calculus), and experimental techniques (glancing angle deposition, ellipsometry, scatterometry, and non-linear optical measurements). The first part of this work focuses on linear optics, namely light scattering from helical microparticles. I study the influence of structural parameters and orientation on the optical properties of particles: circular dichroism (CD) and optical rotation (OR), and show that as a consequence of random orientation, CD and OR can have the opposite sign, compared to that of the oriented particle, potentially resulting in ambiguity of measurement interpretation. Additionally, particles in random orientation scatter light with circular and elliptical polarization states, which implies that in order to study multiple scattering from randomly oriented chiral particles, the polarization state of light cannot be disregarded. To perform experiments and attempt to produce particles, a newly constructed multi stage thin film coating chamber is calibrated. It enables the simultaneous fabrication of multiple sculptured thin film coatings, each with different structure. With it I successfully produce helical thin film coatings with Ti and TiO_{2}. The second part of this work focuses on non-linear optics, with special emphasis on second-harmonic generation. The scientific literature shows extensive experimental and theoretical work on second harmonic generation from chiral thin films. Such films are expected to always show this non-linear effect, due to their lack of inversion symmetry. However no experimental studies report non-linear response of chiral sculptured thin films. In this work I grow films suitable for a second harmonic generation experiment, and report the first measurements of non-linear response.