Brazilian results on structural masonry concrete blocks

The purpose of this paper is to study the mechanical behavior of concrete blocks and prisms when performing axial compression tests within the Brazilian base of knowledge, intending to foment data of this kind for a world-based network. The blocks were built using five different mixtures in which the quantity of cement and the compacting ratio (density) were varied (during the fabrication process). The three-course-high prisms were assembled using 1 cm (0.39 in.) thick full-bedded joints, always trying to leave the mortar's characteristics constant. The axial compression tests were conducted according to Brazilian practice code recommendations, because most of these standards are very similar to international practice codes. The compressive strength, strains, and rupture form of each mixture studied were recorded. Attempts were made to correlate the strength, efficiency ratio (block strength/prism strength) of the prisms, strains, and rupture form; with the quantity of cement and compacting ratio. The data are presented in tables and figures, and the obtained results are discussed throughout the text. Copyright © 2007, American Concrete Institute. All rights reserved.

Caste differences in Polybia ematiata, a mud-nesting eusocial wasp (hymenoptera: Vespidae), that bear on pre-imaginal determination but not size differences

The Epiponini is a group of social wasps living in polygynic societies. The caste dimorphism varies from incipient to well distinct. Morphometric analyses on twelve body parts and ovarian development of Polybia emaciata Lucas 1879, were used to estimate the level of caste differentiation in seven colonies. Physiologic differences were found. Among queens the ovaries were inseminated and presented as highly developed; in intermediate females, ovaries were slightly developed and uninseminated, and for the workers the ovaries were not developed or inseminated. In addition, the coloration of the mesosoma and metasoma were darker in workers and intermediates. Morphometric analysis evidenced slight morphological differences. Even though body proportions were not enough to discriminate castes, the fifth sternite of the gaster had important characters that were able to differentiate queens from workers and intermediates. We propose that P. emaciata presents a case of pre-imaginal caste determination, which is not strictly based on size.

Fine needle aspirate cell blocks are reliable for detection of hormone receptors and HER-2 by immunohistochemistry in breast carcinoma

Aims: To evaluate the reliability of fine needle aspirate cell blocks in the assessment of oestrogen receptor (ER), progesterone receptor (PR) and HER-2/neu proteins by immunohistochemistry in comparison with surgical specimens. Materials and methods: This is a retrospective study of 62 cases of breast carcinoma diagnosed by fine needle aspiration cytology (FNAC) and confirmed using the surgical specimen. Immunohistochemical tests were performed to assess the presence of oestrogen receptor (ER), progesterone receptor (PR) and HER-2/neu proteins in cell blocks and the corresponding surgical specimens. The cell block method used alcohol prior to formalin fixation. Cases with 10% or more stained cells were considered positive for ER and PR. Positivity for HER-2/neu was assessed on a scale of 0-3+. The criterion for positivity was a score of 3+. Results: Sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV) and accuracy of the cell blocks in the investigation of ER, PR and HER-2/neu protein (3+) were (%): ER, 92.7, 85.7, 92.7, 85.7 and 90.3; PR, 92.7, 94.7, 97.4, 87.0 and 93.5; HER-2/neu, 70.0, 100.0, 100.0, 94.5 and 95.2. Discrepancies were seen in cell blocks in the 1+ and 2+ HER-2/neu staining scores: two of 12 cases scoring 2+ and one case of 26 scoring 1+ on cell blocks scored 3+ on surgical specimens. The correlation index between cell block and corresponding surgical specimen varied from 90% to 94%. Conclusion: Cell blocks provide a useful method of assessing ER, PR and HER-2/neu, mainly for inoperable and recurrent cases, but consideration should be given to carrying out FISH analysis on 1+ as well as 2+ HER-2/neu results. © 2012 Blackwell Publishing Ltd.

Isolation and characterization of microsatellite loci for the mud-dauber wasp Trypoxylon (Trypargilum) albitarse (Hymenoptera: Crabronidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Clinical similarities and histological diversity comparing fresh frozen onlay bone blocks allografts and autografts in human maxillary reconstruction

Background: In the absence of autologous bone for harvesting, fresh-frozen bone allografts turned into an alternative for bone reconstruction procedures. Purpose: The purpose of this study was to make a histological analysis of fresh-frozen onlay bone allografts (ALs), compared with autografts, in patients who needed maxillary reconstruction prior to dental implants placement. Materials and Methods: Twelve patients with bone deficiencies (width inferior to 4mm) in the sites where the implants were planned were enrolled in the study. From these, six were elected to be treated with autogenous (AT) bone grafts and six with fresh-frozen bone AL. This last group included the patients who had absence of a convenient amount of bone in donor sites. Each patient received from one to six graft blocks, totalling to 12 ATs and 17 ALs. Seven months after grafting procedures, biopsies of the grafts were made using 2-mm internal diameter trephine burs, and processed for histological analysis. One biopsy was retrieved from each patient. Results: Clinically, all grafts were found to be firm in consistency and well-incorporated to the receptor bed. Histological analysis showed a large amount of necrotic bone surrounded by few spots of new-formed bone in the AL group, suggesting low rate of graft remodeling. In the AT group, an advanced stage of bone remodeling was seen. Conclusions: Human fresh-frozen bone block AL showed clinical compatibility for grafting procedures, although associated to slow remodeling process. Further studies are needed to define, at long term, the remodeling process chronology the clinical longitudinal results for fresh-frozen bone AL. Copyright © 2013 Wiley Periodicals, Inc.

Aproveitamento de rejeitos oriundos da extração de minério de ferro na fabricação de cerâmicas vermelhas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Infestação de Mahanarva fimbriolata (Stal, 1854) e controle químico na qualidade da matéria-prima e classificação do caldo de cana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Níquel (II) e moléculas orgânicas multidentadas como building blocks na construção de sólidos de coordenação porosos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Amenizantes em solo contaminado com bário

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho estrutural de blocos, primas, mini-paredes e paredes de alvenaria estrutural confeccionadas com blocos cerâmicos produzidos a partir da mistura de lama vermelha com argila

Novas técnicas de aprimoramento de resíduos tem se tornado cada vez mais importante na construção civil, principalmente quando se trata da utilização de resíduos de outros segmentos industriais e na redução de matérias primas naturais. O objetivo deste estudo foi avaliar a utilização de um resíduo proveniente da produção da alumina metalúrgica conhecido como lama vermelha (LV), no desempenho estrutural de blocos, prismas, mini-paredes e paredes confeccionados com blocos cerâmicos, com seções transversais, reticulada e circular, produzidos a partir da mistura de LV e argila. Foram realizados ensaios experimentais correspondentes à caracterização dos materiais empregados e ensaios de resistência à compressão das unidades, blocos, prismas, mini-paredes e paredes. Todos os materiais e unidades cumpriram com os requisitos normalizados para sua correta utilização nos testes experimentais. Os resultados obtidos dos ensaios a compressão dos elementos demonstraram que os blocos confeccionados com a mistura de LV e argila atenderam aos parâmetros normativos e apresentaram resultados satisfatórios e superiores aos componentes confeccionados com blocos cerâmicos compostos com 100% de argila, empregados usualmente nas construções.

Comportamento de blocos cerâmicos estruturais produzidos a partir da mistura de lama vermelha e argila

A utilização de novas técnicas de aproveitamento de resíduos tem-se tornado cada vez mais importante na construção civil, principalmente quando se trata da utilização de resíduos de outros segmentos industriais e da redução de consumo de matérias-primas naturais. O objetivo deste estudo foi avaliar a utilização da lama vermelha, resíduo proveniente da produção de alumina metalúrgica, na produção de blocos cerâmicos vazados estruturais. A produção dos blocos foi realizada em uma indústria cerâmica, a partir de uma mistura de 60% de lama vermelha (LV) e de 40% de argila. Após a produção dos blocos, realizaram-se ensaios de acordo com as normas técnicas, tais como absorção de água e compressão axial simples. A partir da análise dos resultados, observou-se que os blocos estruturais produzidos a partir da mistura de LV e argila atenderam aos parâmetros normativos quanto ao índice de absorção de água e de resistência à compressão, e que as resistências médias e características desses blocos foram superiores às dos blocos cerâmicos de referência.

Concretes with red mud coarse aggregates

Red mud (RM) is a mineral waste, residue of the Bayer process used to obtain alumina from bauxite. While the exploration of rolled pebble damages the environment and is much more controlled by the government, the huge RM disposal areas do not stop increasing and polluting soil, rivers and groundwater sources in Amazon. In this work, the material mixtures used to produce coarse aggregates presented up to 80% of RM, 30% of metakaolin and 30% of active silica as recycled waste. Several tests were carried out to determine the aggregates physical properties and to evaluate the mechanical performance of the concretes with the new aggregates, including hydraulic abrasion strength, and the results were compared to the reference ones, i.e. rolled pebble concretes. Additionally, the sintering process neutralizes any toxic substance as occur in some RM products like tiles and bricks, and these results have encouraged an industrial or semi-industrial production of RM aggregates for concretes.

Feasibility of RF Sputtering and PIIID for production of thin films from red mud

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Removal of reactive dye from aqueous solution using thermally treated red mud

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electropolymerization using binuclear nickel(II) Schiff base complexes bearing N4O4 donors as supramolecular building blocks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)