884 resultados para Mouth rinse
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Tem sido demonstrado que o diabetes influencia no desenvolvimento e progressão da doença periodontal. Acredita-se ainda que há uma relação bi-direcional entre o Diabetes Mellito e a Doença Periodontal. Por isso, o tratamento periodontal pode responder de forma diferente em pacientes com e sem o quadro de diabetes. O objetivo desse estudo foi avaliar clinicamente o efeito da terapia periodontal não cirúrgica em pacientes com periodontite e diabetes mellito (grupo teste) e sem o quadro de diabetes (grupo controle). Para isso, realizou-se o tratamento periodontal não-cirúrgico FMSRP (Full mouth Scalling and Root Planing) e verificou-se os parâmetro clínicos periodontais (profundidade de sondagem, nível clínico de inserção, mobilidade, índice gengival e índice de placa) no início do estudo e após 3 meses. Na análise estatística, o paciente foi considerado como unidade de análise (p<0,05). Para as variáveis categóricas utilizou-se o teste de Fisher. Nas comparações inter-grupo, foi utilizado o Mann-Whitney Test e para comparações intra-grupo (baseline e três meses) utilizou-se o Teste de Wilcoxon. Participaram 26 pacientes no grupo controle e 14 no grupo teste. O índice de placa era 71,20% no início do estudo para o grupo teste e ficou 47,12% no fim; já no controle, os valores eram de 48,52% passando para 37,50%. E o índice gengival no grupo teste no baseline era 42,67 diminuindo para 26,81 e no grupo controle diminuiu de 41,36 para 30,62. A profundidade de sondagem foi no grupo teste 2,71mm passando para 2,40mm; já no controle, os valores foram de 2,84mm diminuindo para 2,55mm. O grupo controle ganhou 0,34 mm de inserção e o grupo teste perdeu 0,44mm de inserção. A recessão gengival aumentou 0,33mm no grupo teste e 0,04mm no grupo controle após os 3 meses. Houve diferença significativa inter-grupo para o índice de placa e gengival no baseline, também foi encontrado na recessão após 3 meses; já intra-grupo verificou-se diferença significativa para todas as variáveis, exceto para o nível clinico de inserção e mobilidade. Quando se categorizou a profundidade de sondagem em ≤3mm, >3 e≤6mm e >6mm, não foi encontrado diferença entre os grupos, mas verificou-se diferença significativa entre os períodos tanto para o grupo teste como para o controle. A hemoglobina glicada no grupo controle foi de 5,90% e no teste aumentou de 7,79% para 8,10%. Portanto, verifica-se que há uma melhora dos parâmetros clínicos periodontais em ambos os grupos, contudo não se verificou uma diferença significativa entre eles. Não obstante, o FMSRP promove um efeito benéfico em relação à condição de saúde periodontal, melhora dos parâmetros clínicos periodontais, em curto prazo (3 meses) tanto em indivíduos diabéticos como em não diabéticos, não sendo possível observar um melhor quadro glicêmico nos diabéticos
Resumo:
The purpose of this study was to evaluate stress distribution in the hybrid layer produced by two adhesive systems using three-dimensional finite element analysis (FEA). Four FEA models (M) were developed: Mc, a representation of a dentin specimen (41 x 41 x 82 mu m) restored with composite resin, exhibiting the adhesive layer, hybrid layer (HL), resin tags, peritubular dentin, and intertubular dentin to simulate the etch-and-rinse adhesive system; Mr, similar to Mc, with lateral branches of the adhesive; Ma, similar to Mc, however without resin tags and obliterated tubule orifice, to simulate the environment for the self-etching adhesive system; Mat, similar to Ma, with tags. A numerical simulation was performed to obtain the maximum principal stress (sigma(max)). The highest sigma(max) in the HL was observed for the etch-and-rinse adhesive system. The lateral branches increased the sigma(max) in the HL. The resin tags had a little influence on stress distribution with the self-etching system. (C) 2012 Elsevier Ltd. All rights reserved.
Resumo:
The effect of mouth rinses containing fluoride (100 mu g/ml) and sodium trimetaphosphate (TMP) on enamel erosion was evaluated in vitro. Bovine enamel blocks were subjected to erosive challenges 4 times per day for 5 min, followed by treatment with placebo, 225 mu g F/ml, 100 mu g F/ml, 100 mu g F/ml and TMP (0.2, 0.4 and 0.6%) solutions (30 s) and storage in artificial saliva, over a duration of 5 days. TMP groups showed lower enamel wear than fluoride-only and placebo groups (p < 0.05). Addition of TMP at a TMP:NaF molar proportion between 1.24:1 and 3.72:1 to a solution containing 100 mu g F/ml presented a greater protective effect under erosive conditions than a solution containing 225 mu g F/ml, in the absence of TMP. Copyright (C) 2011 S. Karger AG, Basel
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Purpose: The purpose of this study was to evaluate mouth-breathing and nasal-breathing children prior to surgical intervention and 28 months postoperatively, comparing the occlusal features obtained pre- and postoperatively through orthodontic study costs. Methods: The mouth-breathing (MB) group consists of 33 MB children who underwent surgery and presented a nasal-breathing (NB) pattern after surgery The control group comprised 22 NB children. The orthodontic examinations were accomplished prior to surgery (77) and an average of 28 months postoperatively (T2). Results: At T1, the MB and NB children presented no statistically significant difference in any analyzed occlusal features and measurements. At T2, the MB presented larger overjet comparing to NB children (P<.05). MB and NB groups presented statistically similar results (P>.05) concerning intercanine and intermolor distances, second primary molar terminal plane and canine relationship, overbite, crossbite, and open bite. From T1 to T2, the MB and NB groups showed a statistically significant difference in the molar terminal plane. Conclusion: Neither the breathing pattern nor the surgery had any effect on occlusal features in 3- to 6-year-olds. (Pediatr Dent 2012;34:10842) Received May 14, 2010 vertical bar Last Revision April 11, 2010 vertical bar Accepted April 12, 2010
Resumo:
Purpose: To evaluate whether Nd:YAG laser irradiation of etched and unetched dentin through an uncured adhesive affected the microtensile bond strength (pTBS).Materials and Methods: Flat dentin surfaces were created in 19 extracted human third molars. Adper Single Bond (SB) adhesive was applied over etched (groups 1 to 3) or unetched dentin (groups 4 to 6). The dentin was then irradiated with a Nd:YAG laser through the uncured adhesive, using 0.75 or 1 W power settings, except for the control groups (groups 1 and 4). The adhesive was light cured and composite crowns were built up. After 24 h, the teeth were sectioned into beams, with cross-sectional areas of 0.49 mm(2), and were stressed under tension. Data were statistically analyzed using two-way ANOVA and Tukey's test (alpha = 5%). Dentin surfaces of fractured specimens and the interfaces of untested beams were observed under scanning electron microscopy (SEM).Results: Acid etching, laser irradiation, and their interaction significantly affected bonding (p < 0.05). Laser irradiation did not improve bonding of etched dentin to resin (p > 0.05). However, higher pTBS means were found on unetched lased dentin (groups 5 and 6), but only in comparison to group 4, where neither lasing nor etching was performed. Groups 4 to 6 showed the lowest pTBS means among all groups tested (p < 0.05). Laser irradiation did not change the characteristics of the hybrid layers created, while solidification globules were observed on lased dentin surfaces under SEM.Conclusion: Laser irradiation of dentin through the uncured adhesive did not significantly improve the pTBS in comparison to the suggested manufacturer's technique.
Resumo:
The literature suggests that environmental contamination is common during labeled aerosol inhalation procedures in nuclear medicine. We have tested an adherent mask to prevent environmental contamination in 70 procedures. Two groups of patients were evaluated, Group 1 (60 inhalation cases in which the mask was used) presented no environmental contamination in 95% of the procedures (means of 553 dpm and 596 dpm before and after inhalation, p > 0.05, mean of the differences before/after inhalation 6.95, SD = 21.2 dpm) and the only 3 cases in which contamination did occur concerned bearded men; Group 2 (10 inhalation cases in which the mask was not used) showed large increases of environmental radioactive levels in 70% of the procedures (means of 601 dpm and 2,756 dpm before and after inhalation, p < 0.05, mean of the differences 3,066, SD = 2,98 dpm), We conclude that such a mask is very helpful in avoiding environmental contamination during radioaerosol inhalation procedures.
Resumo:
Nine foot-and-mouth disease virus (FMDV) type A isolates recovered from the field FMD foci in São Paulo State, Brazil, during 1994 and 1995 (a period preceding the last reported focus of FMD in 1996 in this state) were compared among themselves and with the reference vaccine strain A(24)Cruzeiro. The techniques used were sandwich ELISA, virus neutralization (VN), polyacrylamide gel electrophoresis (PAGE) of the structural polypeptides and direct sequencing of the VP1-coding region (1D gene). Results of VN were recorded as serological relationships R and those from ELISA were expressed as percentage of the homologous reaction r. ELISA and VN gave comparable results (correlation coefficient, 0.936) allowing assignment of these field viruses to four groups which were distinct from the A(24)Cruzeiro strain. PAGE and ID nucleotide sequencing were also able to distinguish between these viruses. The high level:of genetic and antigenic variation found when comparing the A(24)Cruzeiro vaccine strain and type A strains recovered, from the last identified foci of FMD came from a formerly endemic area where vaccination with polyvalent vaccines (O(1)Campos, A(24)Cruzciro and C(3)Indaial) had been extensively applied. The similarity between the results of the serological and genetic analyses suggest that the antigenic differences found are mainly located in the 1D protein. (C) 2002 Elsevier B.V. B.V. All rights reserved.
Resumo:
Habitat fragmentation and diseases have resulted in a decline of the marsh deer (Blastocerus (dichotomus) throughout its South American range. Our objectives were to determine whether marsh deer intended for translocation from a region of the Rio Parana Basin had been infected previously by foot-and-mouth disease virus (FMDV) and whether they were carrying virus We captured marsh deer from June to October 1998 and collected blood from 108 animals and esophageal-pharyngeal fluid from 53 Serum was tested for antibodies against three FMDV serotypes (O, A, and C) by liquid-phase-blocking sandwich enzyme-linked immunosorbent assay (ELISA) Esophageal-pharyngeal fluid was tested for FMDV RNA by reverse transcription polymerase chain reaction (RT-PCR) and inoculation into three successive baby hamster kidney (BHK-21) cell subcultures, followed by RT-PCR of cultures We detected low log(10) titers (range 1 0-1 5) to FM DV subtype A(24) Cruzeiro in 19 of 108 sampled marsh deer, but failed to isolate FMDV or detect FMDV RNA in any samples we conclude that marsh deer from our study site were unlikely to carry FMDV, however, as a preventive measure, the 19 animals with titers for FMDV were not sent to FMDV-free Brazilian states
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A descriptive analysis of the responses of plankton from lakes lateral to a river in its mouth zone into a tropical reservoir to water level variations is presented. Three situations were reported: 1) a comparison of species richness and diversity and of algae population abundance in prolonged drought and in periods of connection of lakes to the river, 2) the spatial distribution of abundance and richness of Rotifera species in four isolated water bodies formed by fragmentation of a lateral lake during a period of prolonged drought and in the same areas during a period of integrity as an ecosystem, 3) the variability of total zooplankton and Cladocera densities at the end of the isolation period of a lateral lake and after the recovery of connection with the river and in a year of continuous connection with the lotic ecosystem. Various idiosyncrasies were observed in connected lateral lakes, like the surface hydrologic connectivity, a primary factor in species richness modifcations and a secondary controlling factor of plankton abundance. Underground hydrologic connectivity, through the river[forward arrow] lake water fux during the high-water period and lake [forward arrow] river during drought period, appears to have an important role in richness and abundance variations of planktonic populations in the lake isolated from the river.
Resumo:
Objectives: The lack of durability in resin-dentine bonds led to the use of chlorhexidine as MMP-inhibitor to prevent the degradation of hybrid layers. Biomimetic remineralisation is a concept-proven approach in preventing the degradation of resin-dentine bonds. The purpose of this study is to examine the integrity of aged resin-dentine interfaces created with a nanofiller-containing etch-and-rinse adhesive after the application of these two approaches.Methods: The more established MMP-inhibition approach was examined using a parallel in vivo and in vitro ageing design to facilitate comparison with the biomimetic remineralisation approach using an in vitro ageing design. Specimens bonded without chlorhexidine exhibited extensive degradation of the hybrid layer after 12 months of in vivo ageing.Results: Dissolution of nanofillers could be seen within a water-rich zone within the adhesive layer. Although specimens bonded with chlorhexidine exhibited intact hybrid layers, water-rich regions remained in those hybrid layers and degradation of nanofillers occurred within the adhesive layer. Specimens subjected to in vitro biomimetic remineralisation followed by in vitro ageing demonstrated intrafibrillar collagen remineralisation within hybrid layers and deposition of mineral nanocrystals in nanovoids within the adhesive.Conclusions: The impact was realized by understanding the lack of an inherent mechanism to remove water from resin-dentine interfaces as the critical barrier to progress in bonding with the etch-and-rinse technique. The experimental biomimetic remineralisation strategy offers a creative solution for incorporating a progressive hydration mechanism to achieve this goal, which warrants its translation into a clinically applicable technique. (C) 2011 Elsevier Ltd. All rights reserved.