Extra dimensions at the CERN LHC via mini-black holes: Effective Kerr-Newman brane-world effects

We solve Einstein equations on the brane to derive the exact form of the brane-world-corrected perturbations in Kerr-Newman singularities, using Randall-Sundrum and Arkani-Hamed-Dimopoulos-Dvali (ADD) models. It is a consequence of such models that Kerr-Newman mini-black holes can be produced in LHC. We use this approach to derive a normalized correction for the Schwarzschild Myers-Perry radius of a static (4+n)-dimensional mini-black hole, using more realistic approaches arising from Kerr-Newman mini-black hole analysis. Besides, we prove that there are four Kerr-Newman black hole horizons in the brane-world scenario we use, although only the outer horizon is relevant in the physical measurable processes. Parton cross sections in LHC and Hawking temperature are also investigated as functions of Planck mass (in the LHC range 1-10 TeV), mini-black hole mass, and the number of large extra dimensions in brane-world large extra-dimensional scenarios. In this case a more realistic brane-effect-corrected formalism can achieve more precisely the effective extra-dimensional Planck mass and the number of large extra dimensions-in the Arkani-Hamed-Dimopoulos-Dvali model-or the size of the warped extra dimension-in Randall-Sundrum formalism.

Mini-implant and Nance button for initial retraction of maxillary canines: a prospective study in cast models

OBJETIVO: a ancoragem óssea é fundamental para o sucesso do tratamento de algumas más oclusões, pois permite a aplicação de forças contínuas, diminui o tempo de tratamento e independe da colaboração do paciente. MÉTODOS: o propósito desse trabalho foi comparar, por meio de modelos dentários, a perda de ancoragem após a retração inicial de caninos superiores entre dois grupos. O grupo A utilizou o mini-implante enquanto o grupo B utilizou o Botão de Nance. Para todos os pacientes foram realizados dois modelos (M1 e M2). Os primeiros modelos foram realizados ao início (M1), e os outros ao final da retração inicial de canino (M2). RESULTADOS: todas as medidas foram tabuladas e submetidas à análise estatística. Para verificar o erro sistemático intraexaminador foi utilizado o teste t pareado. Na determinação do erro casual utilizou-se o cálculo de erro proposto por Dahlberg. Para comparação entre as fases Início e Após, foi utilizado o teste t pareado. Para a comparação entre os grupos de mini-implante e Botão de Nance, foi utilizado o teste t de Student para medidas independentes. em todos os testes foi adotado nível de significância de 5% (p<0,05). CONCLUSÃO: ao se medir e comparar em modelos dentários a perda de ancoragem dos molares após a retração inicial de canino utilizando-se dois sistemas de ancoragem distintos (Mini-implante e Botão de Nance), pôde-se observar a inexistência de diferença estatisticamente significativa entre os dois grupos.

Brotação de mini-tubérculos de sete cultivares de batata em função de concentrações de bissulfureto de carbono

Estudou-se o efeito de concentrações de bissulfureto de carbono sobre a brotação de mini-tubérculos de batata. O ensaio foi instalado no esquema fatorial 5 x 7, onde as variáveis constaram de quatro diferentes doses de bissulfureto de carbono (10; 20; 30 e 40 mg L-1) além do controle e sete cultivares de batata (Bintje, Jaete Bintje, Atlantic, Cupido, Ágata, Monalisa e Mondial). Os tratamentos com bissulfureto de carbono foram aplicados durante um período de 72 horas, após o qual os mini-tubérculos de batata foram colocados em bandejas de isopor para brotação. de forma geral, todas as concentrações de bissulfureto de carbono estimularam a brotação. As cultivares Bintje e Atlantic responderam de forma positiva ao bissulfureto de carbono, onde o aumento da concentração levou ao aumento do número de brotos por tubérculo. As cultivares Ágata e Mondial responderam positivamente à concentração de 10 mg L-1, sendo que o acréscimo nas concentrações pouco interferiu no número de brotos por tubérculo. As cultivares Jaete Bintje e Monalisa só responderam às concentrações de 20 e 30 mg L-1, e na de 40 mg L-1 o bissulfureto de carbono provocou a queima de gemas.

Yolk sac remnant in a mini-pony foal

Few reports are available concerning yolk sac remnants in the equine species, with little information on histopathological findings. A stillborn mini-pony foal showed a fluid-filled mass, measuring about 10 cm in circumference, close to the umbilical cord. Microscopic examination better defined the structures seen in the cyst.

Determination of cadmium in river water samples by flame AAS after on-line preconcentration in mini-column packed with 2-aminothiazole-modified silica gel

A rapid and sensitive method was developed to determine trace levels of Cd2+ ions in an aqueous medium by flame atomic absorption spectrometry, using on-line preconcentration in a mini-column packed with 100 mg of 2-aminothiazol modified silica gel (SiAT). The Cd2+ ions were sorbed at pH 5.0. The preconcentrated Cd2+ ions were directly eluted from the column to the spectrometer's nebulizer-burner system using 100 μL of 2 mol L-1 hydrochloric acid. A retention efficiency of over 95% was achieved. The enrichment factor (calculated as the ratio of slopes of the calibration graphs) obtained with preconcentrations in a mini-column packed with SiAT (A = -1.3 × 10-3 + 1.8 × 10-3 [Cd2+]) and without preconcentrations (A = 4 × 10-5 + 3.5 × 10-3[Cd2+]), was 51 and the detection limit calculated was 0.38 μg L-1. The preconcentration procedure was applied to determine trace levels of Cd in river water samples. The optimum preconcentration conditions are discussed herein.

Low-cost PWM speed controller for an electric mini-baja type vehicle

This paperwork presents a Pulse Width Modulation (PWM) speed controller for an electric mini-baja-type car. A battery-fed 1-kW three-phase induction motor provides the electric vehicle traction. The open-loop speed control is implemented with an equal voltage/frequency ratio, in order to maintain a constant amount of torque on all velocities. The PWM is implemented by a low-cost 8-bit microcontroller provided with optimized ROM charts for distinct speed value implementations, synchronized transition between different charts and reduced odd harmonics generation. This technique was implemented using a single passenger mini-baja vehicle, and the essays have shown that its application resulted on reduced current consumption, besides eliminating mechanical parts. Copyright © 2007 by ABCM.

Investimentos na indústria brasileira depois da abertura e do real: o mini-ciclo de modernizações, 1995-1997

Incluye Bibliografía

Performance of cultivars of crisp mini-lettuce with respect to ground cover and spacing, in three planting times

The planting of lettuce in greenhouses, as well as covering beds with a polyethylene sheet, is a viable technology, promoting improvements in microclimatic conditions of the environment. In view of the little information on mini-lettuce, the aim of this work was to evaluate the performance of three cultivars of crisp minilettuce ('Green Frizzly', 'Red Frizzly no. 1' and 'Red Frizzly no. 2') with and without ground cover, under different spacings (20 × 15 cm and 20 × 20 cm), in three planting times (1: November 16, 2004; 2: December 17, 2004; and 3: January 20, 2005). The study was conducted in a greenhouse at UNESP-FCAV, Jaboticabal-SP. The experiments were carried out using a randomized block design, following a 3 × 2 × 2 factorial scheme with 12 treatments and three repetitions. The characteristics evaluated were plant height (cm), head diameter (cm), fresh weight (g) and number of leaves per plant. Planting time 3 was shown to be favorable for all the characteristics analyzed. 'Red Frizzly no. 2' was found to be the most suited to planting time 1, and for planting times 2 and 3, this cultivar did not differ from 'Red Frizzly no. 1'. The factor ground cover was not found to affect the characteristics evaluated, and therefore, cultivation without ground cover is recommended. The spacing 20 × 15 cm was shown to be favorable, resulting in cultivation with the highest populations, thereby increasing productivity. Based on the results obtained and for the conditions in which the experiment was conducted, it can be concluded that: planting time 3 (January 20, 2005) was the most favorable; the cultivars 'Red Frizzly no. 2' and 'Red Frizzly no. 1' are adapted to all the planting times; and cultivation without ground cover using a spacing of 20 × 15 cm was the most suitable.

El lenguaje de búsqueda del mini-micro CDS

Incluye Bibliografía

Ayuda memoria (5): sintaxis de las expresiones de búsqueda (orden en que el mini-micro CDS

Presenta la coordinación o unión de las expresiones de búsqueda.

Ayuda memoria (6): nombre de hojas de trabajo, formatos de visualización en pantalla e impresión y clasificación de los menúes mini-micro CDS

Tiene por objetivo facilitar al personal de las unidades de información de la Red IPALCA la realización de funciones utilizando el Mini-Micro CDS/ISIS.

Ayuda memoria (8): instalación del mini-micro CDS

Contiene el procedimiento de instalación del Microisis modificado y del Sistema de Información Bibliográfica de CEPAL para la Red IPALCA.

Guía para la preparación de la hoja de control de ingreso de documentos (HCID): procedimiento de ingreso directo en el sistema mini-micro CDS

Incluye Bibliografía

Ayuda memoria (9): explicación (en inglés) de formatos de despliegue del mini-micro CDS

Explica literales y comandos para espaciador horizontal y vertical y otros de los formatos de despliegue del mini-micro CDS/ISIS.

Ayuda memoria (10): traspaso de una base de datos en mini-micro CDS

Contiene ayuda memoria para la exportación de una base, creación de archivo PAR, creación de subdirectorio y copia de archivos para lo cual se requiere tener instalado el Mini Micro ISIS versión 1.0 y 2.3 Red IPALCA.