Electrochemical, gravimetric and quantum chemical analysis of mild steel corrosion inhibition by colchicine in 1 M HCl medium

The inhibition effect of colchicine (CC) on mild steel (MS) corrosion in 1 M HCl solution has been investigated by electrochemical techniques such as electrochemical impedance spectroscopy, potentiodynamic polarization, chronoamperometry and also by the gravimetric method. Polarization studies showed that CC acts as mixed type corrosion inhibitor. The inhibitor adsorption process in the MS/CC/HCl system was studied at different temperatures (303-333 K). The adsorption of CC on MS surface is an exothermic process and obeys the Langmuir adsorption isotherm. Based on potential of zero charge values and quantum chemical parameters, the mechanism of adsorption has been proposed.

Erosion-corrosion of mild steel in a temperature gradient

Thinning of heat-exchanger tubes by erosion-corrosion has been a problem in fluidized bed combustors (FBCs), particularly at lower metal temperatures where thicker, mechanically protective oxide scales are unable to form. Many laboratory-scale tests have shown a decrease in material loss at higher temperatures, in a similar manner to FBC boilers, but also show a decrease in wastage at low temperatures (e.g. 200°C) which has not been detected in boilers. It has been suggested that this difference is due to laboratory tests being carried out isothermally whereas in a FBC boiler the fluidized bed is considerably hotter than the metal heat exchanger tubing. In this laboratory study the simulation was therefore improved by internally cooling one of the two low carbon steel specimens. These were rotated in a horizontal plane within a lightly fluidized bed with relative particle velocities of 1.3-2.5 m s-1. Tests were carried out over a range of bed temperatures (200-500°C) and cooled specimen surface temperatures (115-500°C), with a maximum temperature difference between the two of 320°C. Although specimens exposed isothermally still showed maximum wastage at intermediate temperatures (about 350°C), those which were cooled showed high levels of wastage at temperatures as low as 200°C in a similar manner to FBC boilers. Cooling may modify the isothermal erosion-corrosion curve, causing it to broaden and the maximum wastage rate to shift to lower temperatures. © 1995.

The COMT Val158 Met polymorphism as an associated risk factor for Alzheimer disease and mild cognitive impairment in APOE 4 carriers

Background: The aim of this study is to examine the influence of the catechol-O-methyltranferase (COMT) gene (polymorphism Val158 Met) as a risk factor for Alzheimer's disease (AD) and mild cognitive impairment of amnesic type (MCI), and its synergistic effect with the apolipoprotein E gene (APOE). A total of 223 MCI patients, 345 AD and 253 healthy controls were analyzed. Clinical criteria and neuropsychological tests were used to establish diagnostic groups. The DNA Bank of the University of the Basque Country (UPV-EHU) (Spain) determined COMT Val158 Met and APOE genotypes using real time polymerase chain reaction (rtPCR) and polymerase chain reaction (PCR), and restriction fragment length polymorphism (RFLPs), respectively. Multinomial logistic regression models were used to determine the risk of AD and MCI. Results: Neither COMT alleles nor genotypes were independent risk factors for AD or MCI. The high activity genotypes (GG and AG) showed a synergistic effect with APOE epsilon 4 allele, increasing the risk of AD (OR = 5.96, 95% CI 2.74-12.94, p < 0.001 and OR = 6.71, 95% CI 3.36-13.41, p < 0.001 respectivily). In AD patients this effect was greater in women. In MCI patients such as synergistic effect was only found between AG and APOE epsilon 4 allele (OR = 3.21 95% CI 1.56-6.63, p = 0.02) and was greater in men (OR = 5.88 95% CI 1.69-20.42, p < 0.01). Conclusion: COMT (Val158 Met) polymorphism is not an independent risk factor for AD or MCI, but shows a synergistic effect with APOE epsilon 4 allele that proves greater in women with AD.

Discontinuous yielding and fracture initiation near a notch in mild steel

This thesis presents the results of an experimental investigation of the initiation of brittle fracture and the nature of discontinuous yielding in small plastic enclaves in an annealed mild steel. Upper and lower yield stress data have been obtained from unnotched specimens and nominal fracture stress data have been obtained from specimens of two scale factors and two grain sizes over a range of nominal stress rates from 10^2 to 10^7 lb/in.^2 sec at -111°F and -200°F. The size and shape of plastic enclaves near the notches were revealed by an etch technique.

A stress analysis utilizing slip-line field theory in the plastic region has been developed for the notched specimen geometry employed in this investigation. The yield stress of the material in the plastic enclaves near the notch root has been correlated with the lower yield stress measured on unnotched specimens through a consideration of the plastic boundary velocity under dynamic loading. A maximum tensile stress of about 122,000 lb/in.^2 at the instant of fracture initiation was calculated with the aid of the stress analysis for the large scale specimens of ASTM grain size 8 1/4.

The plastic strain state adjacent to a plastic-elastic interface has been shown to cause the maximum shear stress to have a larger value on the elastic than the plastic side of the interface. This characteristic of dis continuous yielding is instrumental in causing the plastic boundaries to be nearly parallel to the slip-line field where the plastic strain is of the order of the Lüder's strain.

The tensile fracture of mild steel

The fibrous and cleavage tensile fracture of an annealed mild steel was investigated. Round tensile specimens of two geometries, one straight and one with a circumferential notch, were pulled at temperatures between room temperature and liquid nitrogen temperature. Tensile fractures occurred at average strains from 0.02 to 0.87. The mechanism of fibrous fracture at room temperature was investigated metallographically. The stress-strain values at which fibrous and cleavage fractures are initiated were determined.

Many fine microcracks, which are associated with pearlite colonies and inclusion stringers, develop prior to fibrous fracture. The macrofracture, which leads to final separation of the tensile specimen, is initiated by the propagation of a microcrack beyond the microstructural feature with which it is associated. Thus, the fibrous fracture of mild steel does not develop by the gradual growth and coalescence of voids that are large enough to be visible in the optical microscope. When the microcracks begin to open and propagate, final fracture quickly follows. Axial cracks are a prominent feature of the macrofracture that forms in the interior of the specimen immediately before final fracture.

The Bridgman distribution of stresses is not valid in a notched tensile specimen. Fibrous and cleavage fractures occur at approximately the same value of maximum tensile stress. When the maximum tensile stress that is necessary for cleavage fracture is plotted against the corresponding maximum tensile strain, the result is an unique locus.

Alterações histopatológicas pancreáticas, placentárias e na matriz extracelular hipofisária durante a diabetes mellitus gestacional

A Diabetes Mellitus Gestacional (DMG) pode ser definida como intolerância a carboidrato durante a gravidez e estima-se que pode afetar 10-22% de todas as pacientes grávidas. Durante a gravidez podem surgir diversas complicações para o feto como risco elevado de aborto espontâneo, anormalidades congênitas e morbidade e mortalidade neonatal. Entretanto, podem surgir também alterações morfofuncionais em diversos órgãos da mãe diabética, porém isso não é bem estabelecido. Investigar se haverá ou não alterações bioquímicas e histopatológicas em diversos órgãos, como hipófise, útero, placenta e pâncreas de ratas grávidas com diabetes mellitus durante e no final da gravidez e compará-las . Além disso, investigar se há alteração na matriz extracelular (MEC) da hipófise desses animais. No 5 dia de vida, ratas Wistar foram divididas em dois grupos: um tratado com estreptozotocina (Grupo Diabético / DIAB), na dose de 90 mg/kg, subcutâneo e outro grupo, que foi tratado com veículo (tampão citrato/CTR). Aos 90 dias de vidas, foram submetidas ao cruzamento. Após isso, foram sacrificadas no 11 e 21 dia de gravidez. Foram avaliados glicemia e bioquímica maternal e número de implantes .O pâncreas, útero, placenta e hipófises foram coradas com Hematoxilina e Eosina e somente as hipófises foram coradas com Massom e Picrosirius, para avaliação da MEC.Os animais diabéticos tanto do 11 quanto do 21 dia apresentaram uma redução no número de implantes, menor peso e maior glicemia e colesterol total, em relação aos animais controle independente do dia da gravidez. Não foi verificada diferença dos níveis de triglicerídeos entre os grupos não diabéticos e diabéticos, independente dos dias. Entretanto, os animais diabéticos que finalizaram o período de gestação apresentaram uma maior glicemia maternal em relação ao grupo diabético do 11 dia. Pâncreas de ratas diabéticas do 21 dia apresentaram vacuolização intracitoplasmática das ilhotas, insulite,migração de células inflamatórias, espessamento da parede do vaso e fibrose periductal e vascular. Essas alterações foram verificadas com bem menor intensidade nos animais diabéticos do 11 dia. Foi verificado que a placenta de animais diabéticos apresenta congestão na interface materno-fetal, migração celular, maior concentração de vasos maternos e fetais, mas em forma irregular , necrose e vacuolização. A hipófise de animais diabéticos mostraram células cromófobas agregadas, aumento da espessura de fibras de colágeno vermelhas da MEC, em contraste com o controle, que foi visualizado fibras em verde e em formato de feixe. A diabetes desempenhou um total remodelamento da hipófise. Gravidez de animais diabeticos mostraram maior dano ao pâncreas e placenta, especialmente no final da gravidez. Em consequência dessa alterações, esses animais diabéticos apresentaram hiperglicemia, maior colesterol total, porém menor peso materno, número de implantes e sem alterações nos triglicerídeos. Esse é o primeiro estudo a demonstrar remodelamento tecidual em alguns elementos da MEC na hipófise, como espessamento da camada da MEC e fibras de colágeno em verde. Alterações da MEC da hipófise são provavelmente devido ao processo de diabetes na gestação.

Mild Hydrothermal Synthesis, Crystal Structure, Thermal Behavior, Spectroscopic and Magnetic Properties of (NH4)0.80Li0.20[Fe(AsO4)F]

postprint

Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor

Particle concentration is known as a main factor that affects erosion rate of pipe bends in pneumatic conveyors. With consideration of different bend radii, the effect of particle concentration on weight loss of mild steel bends has been investigated in an industrial scale test rig. Experimental results show that there was a significant reduction of the specific erosion rate for high particle concentrations. This reduction was considered to be as a result of the shielding effect during the particle impacts. An empirical model is given. Also a theoretical study of scaling on the shielding effect, and comparisons with some existing models, are presented. It is found that the reduction in specific erosion rate (relative to particle concentration) has a stronger relationship in conveying pipelines than has been found in the erosion tester. © 2004 Elsevier B.V. All rights reserved.

DNS of EGR-type turbulent flame in MILD condition

Three-dimensional direct numerical simulation (DNS) of exhaust gas recirculation (EGR)-type turbulent combustion operated in moderate and intense low-oxygen dilution (MILD) condition has been carried out to study the flame structure and flame interaction. In order to achieve adequate EGR-type initial/inlet mixture fields, partially premixed mixture fields which are correlated with the turbulence are carefully preprocessed. The chemical kinetics is modelled using a skeletal mechanism for methane-air combustion. The results suggest that the flame fronts have thin flame structure and the direct link between the mean reaction rate and scalar dissipation rate remains valid in the EGR-type combustion with MILD condition. However, the commonly used canonical flamelet is not fully representative for MILD combustion. During the flame-flame interactions, the heat release rate increases higher than the maximum laminar flame value, while the gradient of progress variable becomes smaller than laminar value. It is also proposed that the reaction rate and the scalar gradient can be used as a marker for the flame interaction. © 2012 The Combustion Institute. Published by Elsevier Inc. All rights reserved.