Gamma radiation effects on microbial inactivation of two medicinal plants

The consumption of natural products has become a public health problem, since these medicinal teas are prepared using natural plants without an effective hygienic and sanitary control. The aim of this study was to assess the effects of gamma radiation, on the microbial burden of two medicinal plants: Melissa officinalis and Lippia citriodora. Dried samples of the two plants were irradiated at a Co-60 experimental equipment. The applied gamma radiation doses were 1, 3, and 5 kGy at a dose rate of 1.34 kGy/h. Non-irradiated samples followed all the experiments. Bacterial and fungal counts were assessed before and after irradiation by membrane filtration method. Challenging tests with Escherichia coli were performed in order to evaluate the disinfection efficiency of gamma radiation treatment. Characterization of M. officinalis and L. citriadora microbiota indicated an average bioburden value of 102CFU/g. The inactivation studies of the bacterial mesophilic population of both dried plants pointed out to a one log reduction of microbial load after irradiation at 5 kGy. Regarding the fungal population, the initial load of 30 CFU/g was only reduced by 0.5 log by an irradiation dose of 5 kGy. The dynamics with radiation doses of plants microbial population’s phenotypes indicated the prevalence of gram-positive rods for M. officinalis before and after irradiation, and the increase of the frequency of gram-negative rods with irradiation for L. citriadora. Among fungal population of both plants, Mucor, Neoscytalidium, Aspergillus and Alternaria were the most isolated genera. The results obtained in the challenging tests with E. coli on plants pointed out to an inactivation efficiency of 99.5% and 99.9% to a dose of 2 kGy, for M.officinalis and L. citriadora, respectively. The gamma radiation treatment can be a significant tool for the microbial control in medicinal plants.

Carbon surfaces for the oxidative quantification of pravastatin: glassy-carbon vs. screen-printed carbon electrodes

The electrooxidative behavior of pravastatin (PRV) in aqueous media was studied by square-wave voltammetry at a glassycarbon electrode (GCE) and at a screen-printed carbon electrode (SPCE). Maximum peak current intensities in a pH 5.0 buffer were obtained at +1.3 V vs. AgCl/Ag and +1.0 V vs. Ag for the GCE and SPCE surface respectively. Validation of the developed methodologies revealed good performance characteristics and confirmed their applicability to the quantification of PRV in pharmaceutical products, without significant sample pretreatment. A comparative analysis between the two electrode types showed that SPCEs are preferred as an electrode surface because of their higher sensitivity and the elimination of the need to clean the electrode’s surface for its renewal, which frequently is, if not always, the rate-limiting step in voltammetric analysis.

Voltammetric quantification of fluoxetine: application to quality control and quality assurance processes

The oxidative behaviour of fluoxetine was studied at a glassy carbon electrode in various buffer systems and at different pH using cyclic, differential pulse and square wave voltammetry. A new square wave voltammetric method suitable for the quality control of fluoxetine in commercial formulations has been developed using a borate pH 9 buffer solution as supporting electrolyte. Under optimized conditions, a linear response was obtained in the range 10 to 16 μM with a detection limit of 1.0 μM. Validation parameters such as sensitivity, precision and accuracy were evaluated. The proposed method was successfully applied to the determination of fluoxetine in pharmaceutical formulations. The results were statistically compared with those obtained by the reference high-performance liquid chromatographic method. No significant differences were found between the methods.

A case study on the eco-efficiency performance of a composite processing industry: evaluation and quantification of potential improvements

In this study, an attempt was made in order to measure and evaluate the eco-efficiency performance of a pultruded composite processing company. For this purpose the recommendations of World Business Council for Sustainable Development (WCSD) and the directives of ISO 14301 standard were followed and applied. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and eco-efficiency ratios were estimated taking into account the implementation of new proceedings and procedures, at both upstream and downstream of the production process, namely: i) Adoption of a new heating system for pultrusion die-tool in the manufacturing process, more effective and with minor heat losses; ii) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Assessing the eco-efficiency of a composite processing industry: evaluation and quantification of potential improvements’

In this study, an attempt was made in order to measure and evaluate the eco-efficiency performance of a pultruded composite processing company. For this purpose the recommendations of World Business Council for Sustainable Development (WCSD) and the directives of ISO 14301 standard were followed and applied. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent ecoefficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and eco-efficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Simple laccase-based biosensor for formetanate hydrochloride quantification in fruits

This work describes the development of an electrochemical enzymatic biosensor for quantification of the pesticide formetanate hydrochloride (FMT). It is based on a gold electrode modified with electrodeposited gold nanoparticles and laccase. The principle behind its development relies on FMT's capacity to inhibit the laccase catalytic reaction that occurs in the presence of phenolic substrates. The optimum values for the relevant experimental variables such as gold nanoparticles electrochemical deposition (at − 0.2 V for 100 s), laccase immobilization (via glutaraldehyde cross-linking), laccase concentration (12.4 mg/mL), substrate selection and concentration (5.83×10−5 M of aminophenol), pH (5.0), buffer (Britton–Robinson), and square-wave voltammetric parameters were determined. The developed biosensor was successfully applied to FMT determination in mango and grapes. The attained limit of detection was 9.5×10−8 ± 9.5×10−10 M (0.02 ± 2.6×10−4 mg/kg on a fresh fruit weight basis). Recoveries for the five tested spiking levels ranged from 95.5 ± 2.9 (grapes) to 108.6 ± 2.5% (mango). The results indicated that the proposed device presents suitable characteristics in terms of sensitivity (20.58 ± 0.49 A/μM), linearity (9.43×10−7 to 1.13×10−5 M), accuracy, repeatability (RSD of 1.4%), reproducibility (RSD of 1.8%) and stability (19 days) for testing of compliance with established maximum residue limits of FMT in fruits and vegetables.

Mediterranean spotted fever and identification of new agents of rickettsioses in Portugal : epidemiological determinants, host and microbial features in portuguese patients

Resumo: a febre botonosa, também conhecida por febre escaro-nodular (FEN) é uma doença endémica nos Países da bacia do Mediterrâneo, África, Médio Oriente, Índia e Paquistão. O agente etiológico responsável por esta patologia é a bactéria Rickettsia conorii. Contudo, em alguns países, como Portugal e Itália, esta patologia é causada por duas estirpes diferentes: R conorii Malish e R conorii Israeli spotted fever strain. O principal vector e reservatório é o ixodídeo Rhipicephalus sanguineus. Mesmo com uma elevada taxa de subnotificação detectada no nosso País, a taxa incidência da FEN é de 8.4/105 habitantes (1989-2005), uma das mais altas quando comparada coom a de outros países da bacia do Mediterrâneo. De todos os distritos portugueses, Bragança e Beja são aqueles que apresentam as taxas de incidência mais elevadas, 56,8/105 habitantes e 47,4 / 105 habitantes respectivamente. Em Portugal, as alterações climáticas verificadas na última década, nomeadamente a subida das temperaturas médias anuais, parecem ter influenciado o ciclo de vida do vector e a sua dinâmica sazonal, permitindo ao R. sanguineus completar mais de um ciclo de vida por ano. Este facto, e a possibilidade deste vector se manter activo noutros meses do ano, nomeadamente nos meses de inverno, tem influenciado consequentemente o padrão de distribuição anual dos casos de FEN. A febre escaro-nodular caracteriza-se clinicamente como uma doença exantemática, com um processo de vasculite generalizado. Apesar de na generalidade ser considerada uma doença benigna (quando tratada atempadamente e com terapêutica adequada e específica)e de estarem descritos casos graves em cerca de 5-6% dos doentes, em Portugal essa percentagem aumentou e consequentemente levou a um aumento de casos fatais. Este facto tornou-se mais evidente em 1997, no Hospital Distrital de Beja e no Hospital Garcia de Orta, onde a taxa de letalidade atingiu os 32% e 18% respectivamente.Para além dos factores de co-morbilidade encontrados nos doentes mais graves, como diabetes mellitus, ou o atraso na instituição da terapêutica específica, foi colocada de que a estirpe R. conorii Israel spotted fever strain pudesse ser mais virulenta ou então estivesse associada a diferentes manifestações clínicas que dificultassem o diagnóstico clínico e a instituição atempada da terapêutica. Houve ainda a necessidade de avaliar alguns parâmetros imunológicos dos doentes e tentar identificar que factores, nomeadamente que citoquinas, poderiam estar envolvidos na resposta a uma infecção por R.conorii.Face a estas questões foi avaliada e comparada a epidemiologia, manifestações clínicas e laboratoriais de 140 doentes (71 infectados com R. conorii Malish e 69 infectados com R. conorii Israel spotted fever strain). Concluiu-se que existe uma sobreposição de manifestações clinicas entre os dois grupos de doentes, mas que a percentagem da escara de inoculação é significativamente inferior em doentes infectados com R. conorii Israel spotted fever strain. Dos resultados mais importantes encontrados neste estudo concluiu-se que a estirpe R. conorii Malish e é demonstrado, pela primeira vez, estatisticamente que o alcoolismo é um factor de risco para a morte de doentes com FEN. Associadas a factores de um mau prognósitco da doença, estão as manifestações gastrointestinais, que poderão ser ou não reflexo de alterações do sistema nervoso central, e ainda a alteração de parâmetros laboratoriais como a presença de hiperbilirubinemia e aumento dos valores da ureia.A maior parte dos estudos realizados sobre os mecanismos da resposta imunitária à infecção por R. conorii e as interacções hospedeiro - agente etiológico têm sido elucidados com base em modelos animais. Poucos estudos têm sido efectuados em doentes e nenhum estudo prévio tinha sido realizado no sentido de avaliar localmente (escara/pele) quais os mediadores ou outras moléculas envolvidas na resposta imunitária às rickettsioses. Foi avaliado o nível de expressão génica de RNA mensageiro (RNAm)de diferentes citoquinas em amostras de pele de doentes com FEN pela técnica de PCR em tempo real.Os resultados deste estudo mostraram que, quando comparado com o grupo controlo, os 23 doentes analisados apresentavam níveis estatisticamente significativos, mais elevados de expressão génica de interferão (IFN-γ, Tumor necrosis factor (TFN-α, interleucina 10 (IL-10, RANTES (regulated by activation, normal T-cell-expressed and secreted chemokine)e indolamina 2-3 desoxigenase (IDO),uma enzima envolvida no controlo e limitação do crescimento intracelular das rickettsias, através da degradação do triptofano. Seis dos 23 doentes apresentaram ainda niveis de expressão elevados de óxido nítrico indutível (iNOS)que actua como microbicida. Encontrou-se uma correlação positiva entre a expressão de RNAm de TNF-α, γ, iNOS e IDO e os casos menos graves de FEN sugerindo um tipo de resposta imunitária tipo Th1, i.e. com papel protector na resposta à infecção.Verificou-se também que os valores de expressão genética do RNAm de IL-10, estavam inversamente correlacionados com a expressão do RNAm de TNF-α e IFN-γ. Os casos menos graves de FEN parecem assim envolver um balanço entre a resposta pró-inflamatória e anti-inflamatória. Já os níveis de expressão génica do RNAm de IL-10 estavam inversamente correlacionados com a expressão RNAm de TNF-α e IFN-γ. Os casos menos graves de FEN parecem assim envolver um balanço entre uma resposta pró-inflamatória e anti-inflamatória. Já os níveis de expressão RNAm da quimoquina RANTES foram estatisticamente mais elevados em doentes graves.Nesta dissertação é ainda descrita uma nova rickettsiose presente em Portugal, causada pela bactéria R. sibirica mongolitimonae, que foi identificada laboratorialmente por isolamento do agente, e por detecção do DNA em biopsia de pele. A presença deste agente foi ainda corroborada pela detecção em paralelo do mesmo agente no ixodídeos como R. africae like e em pulgas como R. felis e R.typhi alertam para a possibilidade de existência de outras rickettsioses que possam estar diagnosticadas em Portugal. Abstract: Mediterranean spotted fever (MSF), a tick-borne disease caused by Rickettsia conorii, is widley distributed in the Old World, being endemic in the southern Europe, Africa, Middle East, India and Pakistan. In Portugal two strains cause disease: R.conorii Malish and R.conorii Israeli spotted fever.Rhipicephalus sanguineus, the brown dog tick, is considered the main vector and reservoir. MSF is characterized by seasonality, and most of cases are encountered in late spring and summer, peaking in July and August. However, CEVDI/INSA laboratory has observed that the incidence of MSF cases has changed during winter season.The increasing annual averages of air temperatures and warmer and drier winters might have influenced the dynamics of the life cycle and activity of R. sanguineus, and indirectley the number MSF cases during the so called MSF off-season.In the period of 1989-2005, the incidence rate of MSF was 8.4/105 inhabitants, one of the highest rates compared with other endemic countries. In the Portugal during the same period, the highest incidence rates were reported in the districts of Bragança, with 56.8/105 inhabitants, and Beja, with 47.4/105 inhabitants. Severe cases of MSF are reported in 6% of the patients, but it seems that this pattern of disease in Portugal has been changing.This factor became more evident in 1997, with a reported case fatality rate of 32% and 18% in patients with MSF admited at Beja and Garcia Orta Hospitals, respectively. Although it was found that diabetes mellitus and delay in therapy have been implicated as a risk factor for death, the hypothesis was considered, that the new ISF strain isolated from Portugueses patients in the same year (1997)causes different or atypical clinical conorii Malish strain. The local (skin biopsies) immune response to R. conorii infection was also evaluated.A prospective study was performed to characterized epidemiological, clinical, laboratory features and determined risk factors for a fatal outcome. One hundred forty patients (51% patients were infected with Rickettsia conorii Malish stain and 49% with Israeli spotted fever strain)with diagnosis documented with identification of the causative rickettsial strain were admitted to 13 Portugueses Hospitals during 1994-2006.Comparison of the clinical manifestations of MSF caused by Malish and ISF strains revealed tremendous overlap that would not permit clinical recognition of the strain envolved, but an eschar was observed in a significantly higher percentage of patients with Malish than ISF strain.A fatal outcome was significantly more likely for patients with ISF strain infection meaning that ISF strain was more virulent than Malish strain, and also alcoholism was a host risk factor for a fatal outcome.The pathophysiology of a fatal outcome involved significantly greater incidence of petechial rash, gastrointestinal symptoms, confusion/obtundation, dehydration, tachypnea, hepatomegaly, leukocytosis, coagulopathy, azotemia, hyperbilirubinemia, and elevated hepatic enzymes and creatine kinase. Multivariate analysis revealed that acute renal failure and hyperbilirubinemia were most strong associated with a fatal oucome of infections with both strains.The immune response to R. conorii infection determined with both strains. The immune response to R. conorii infection determined by the expression levels of inflammatory and immune mediators in skin biopsies collected from untreated patients with Mediterranean spotted fever reveal that intralesional expression of mRNA of TNF-α, IFN-γ, IL-10, RANTES, and indoleamine-2, 3-dioxygenase (IDO)an enzyme involved in limiting rickettsial growth by tryptophan degradation, were elevated in skin of MSF patients compared to controls. Six patients had elevated levels of inducible nitric oxide synthase (NOS2, a source microbicidal nitric oxide.Positive correlations among TNF-α, IFN-γ, NOS2,IDO and mild-to-moderate disease suggested that type 1 polarization plays a protective role. Significantly high levels of intralesional IL-10 were inversely correlated with IFN-γ and TNF-α. The chemokine RANTES was significantly higher in patients with several MSF. It seems that MSF patients with mild-to-moderate disease have a strong and balanced intralesional pro-inflammatory and anti-inflammatory response, while severe disease is associated with higher chemokine expression.Whether these findings are simply a correlate of mild and severe disease or contribute to anti-rickettsial immunity and pathogenesis remains to be determined.In this dissertation is also described a new rickettsiois present in Portugal caused by R.sibirica mongolitimonae strain, identified based on agent isolation and DNA detection by PCR technique in a skin biopsy.The presence of this agent corroborated by its detection also in Rhipicephalus pusillus tick. Also, pathogenic tick and flea-borne rickettsial agents such as R. africae strain detected in Rhipicephalus bursa tick, and R.felis and R.typhi detected in different fleas species raise the alert for the possible existence of other rickettsioses in Portugal that might be underdiagnosed.

Advanced image processing techniques for detection and quantification of drusen

Dissertation presented to obtain the degree of Doctor of Philosophy in Electrical Engineering, speciality on Perceptional Systems, by the Universidade Nova de Lisboa, Faculty of Sciences and Technology

QUANTIFICATION OF THE POPULATION AND PHAGOCYTARY ACTIVITY OF HEMOCYTES OF RESISTANT AND SUSCEPTIBLE STRAINS OF Biomphalaria glabrata AND Biomphalaria tenagophila INFECTED WITH Schistosoma mansoni

Among the determinant factors in the resistance and susceptibility of Biomphalaria to Schistosoma mansoni, hemocytes play an important role. Aiming at studying S. mansoni/Biomphalaria interactions related to hemocytes, the first step is certainly connected with the standardization of this cell population in uninfected Biomphalaria. In this way, quantification of this cell population in hemolymph, as well as its phagocitary capacity, have been determined for the first time. Furthermore, using susceptible and resistant strains of B. glabrata and B. tenagophila, the hemocytegram and phagocytary capacity of hemocytes after infection with S. mansoni were determined too. Resistant and susceptible strains of B.glabrata (BA and BH, respectively), as well as resistant and susceptible strains of B. tenagophila (Taim and CF, respectively) were infected with 10 miracidia of the LE and SJ strains of S. mansoni, respectively. These infected snails and respective uninfected controls were assessed in relation to the number of circulating hemocytes and alteration in the phagocytary capacity, by using Zymozan and MTT. Reading was taken by means of a spectrophotometer at 5 hours and 1,2,5,10,20 and 30 days after infection. The results showed a decrease in population of the circulating phagocytary cells, 5 hours after infection. One day post-infection, the circulating cells of the susceptible snails showed an increased metabolic activity, but the same event could not be observed in the resistant strains. In the subsequent observation periods, significant differences among the strains studied could not be observed until the end of the experiment

New Strategies on Molecular Biology Applied to Microbial Systematics

Systematics is the study of diversity of the organisms and their relationships comprising classification, nomenclature and identification. The term classification or taxonomy means the arrangement of the organisms in groups (rate) and the nomenclature is the attribution of correct international scientific names to organisms and identification is the inclusion of unknown strains in groups derived from classification. Therefore, classification for a stable nomenclature and a perfect identification are required previously. The beginning of the new bacterial systematics era can be remembered by the introduction and application of new taxonomic concepts and techniques, from the 50’s and 60’s. Important progress were achieved using numerical taxonomy and molecular taxonomy. Molecular taxonomy, brought into effect after the emergence of the Molecular Biology resources, provided knowledge that comprises systematics of bacteria, in which occurs great evolutionary interest, or where is observed the necessity of eliminating any environmental interference. When you study the composition and disposition of nucleotides in certain portions of the genetic material, you study searching their genome, much less susceptible to environmental alterations than proteins, codified based on it. In the molecular taxonomy, you can research both DNA and RNA, and the main techniques that have been used in the systematics comprise the build of restriction maps, DNA-DNA hybridization, DNA-RNA hybridization, sequencing of DNA sequencing of sub-units 16S and 23S of rRNA, RAPD, RFLP, PFGE etc. Techniques such as base sequencing, though they are extremely sensible and greatly precise, are relatively onerous and impracticable to the great majority of the bacterial taxonomy laboratories. Several specialized techniques have been applied to taxonomic studies of microorganisms. In the last years, these have included preliminary electrophoretic analysis of soluble proteins and isoenzymes, and subsequently determination of deoxyribonucleic acid base composition and assessment of base sequence homology by means of DNA-RNA hybrid experiments beside others. These various techniques, as expected, have generally indicated a lack of taxonomic information in microbial systematics. There are numberless techniques and methodologies that make bacteria identification and classification study possible, part of them described here, allowing establish different degrees of subspecific and interspecific similarity through phenetic-genetic polymorphism analysis. However, was pointed out the necessity of using more than one technique for better establish similarity degrees within microorganisms. Obtaining data resulting from application of a sole technique isolatedly may not provide significant information from Bacterial Systematics viewpoint

Trace elements quantification in Portuguese red wines

Dissertation for the Degree of Master in Technology and Food Safety – Food Quality

Bioelectrochemically-assisted reductive dechlorination of 1,2-dichloroethane by a Dehalococcoides-enriched microbial culture

The aim of this study was to verify the possibility to use a polarized graphite electrode as an electron donor for the reductive dechlorination of 1,2-dichloroethane, an ubiquitous groundwater contaminant. The rate of 1,2-DCA dechlorination almost linearly increased by decreasing the set cathode potential over a broad range of set cathode potentials (i.e., from −300 mV to −900 mV vs. the standard hydrogen electrode). This process was primarily dependent on electrolytic H2 generation. On the other hand, reductive dechlorination proceeded (although quite slowly) with a very high Coulombic efficiency (near 70%) at a set cathode potential of −300 mV, where no H2 production occurred. Under this condition, reductive dechlorination was likely driven by direct electron uptake from the surface of the polarized electrode. Taken as a whole, this study further extends the range of chlorinated contaminants which can be treated with bioelectrochemical systems.

Quantification and viability analyses of Pseudokirchneriella subcapitata algal cells using image-based cytometry

This work aims to evaluate the feasibility of using image-based cytometry (IBC) in the analysis of algal cell quantification and viability, using Pseudokirchneriella subcapitata as a cell model. Cell concentration was determined by IBC to be in a linear range between 1 × 105 and 8 × 106 cells mL−1. Algal viability was defined on the basis that the intact membrane of viable cells excludes the SYTOX Green (SG) probe. The disruption of membrane integrity represents irreversible damage and consequently results in cell death. Using IBC, we were able to successfully discriminate between live (SG-negative cells) and dead algal cells (heat-treated at 65 °C for 60 min; SG-positive cells). The observed viability of algal populations containing different proportions of killed cells was well correlated (R 2 = 0.994) with the theoretical viability. The validation of the use of this technology was carried out by exposing algal cells of P. subcapitata to a copper stress test for 96 h. IBC allowed us to follow the evolution of cell concentration and the viability of copper-exposed algal populations. This technology overcomes several main drawbacks usually associated with microscopy counting, such as labour-intensive experiments, tedious work and lack of the representativeness of the cell counting. In conclusion, IBC allowed a fast and automated determination of the total number of algal cells and allowed us to analyse viability. This technology can provide a useful tool for a wide variety of fields that utilise microalgae, such as the aquatic toxicology and biotechnology fields.

Advances on the production of polyhydroxyalkanoates (PHA) by mixed microbial cultures from sugar cane molasses

Dissertação para obtenção do Grau de Mestre em Biotecnologia

Quantification of urban land use intensity - A case of Dhaka City of Bangladesh

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.