Carcinogenesis of the upper gastrointestinal tract induced by N-methyl-N '-nitro-nitrosoguanidine and reflux of duodenal contents in the rat

Purpose: To investigate the combined effects of reflux of duodenal contents through the pylorus and treatment with N-methyl-N'-nitro-nitrosoguanidine ( MNNG) on the development of lesions in the glandular stomach, at the gastrojejunal anastomosis and in the forestomach of rats. Methods: Eighty Male Wistar rats were divided into 4 groups: G1: MNNG + Reflux, G2: Reflux, G3: MNNG and G4: Gastrostomy. MNNG was given in the drinking water ( 100 mg/ml) for 12 weeks and then two groups ( G1 and G2) were submitted to a gastrojejunal anastomosis followed by section of the afferent loop and suture of both stumps to allow reflux of duodenal contents through the pylorus. The animals were sacrificed 18 and 36 weeks after surgery. The lesions obtained in the antral mucosa, at the gastrojejunal anastomosis and in the forestomach were analysed histologically. Results: Duodenal reflux induced proliferative lesions at both glandular and squamous mucosa of the stomach. In the antrum, adenomatous hyperplasia (AH) was observed in 20% and 50% of the animals at the 18(th) and 36(th) weeks respectively. Aditionally 85% of the animals presented AH at the gastrojejunal anastomosis and 60% developed squamous hyperplasia at the squamous portion of the stomach. MNNG treatment plus duodenal reflux enhanced the development of malignant tumors at both glandular and squamous mucosa, since there were 30% of antral adenocarcinomas and 45% of squamous carcinomas at the 18th week and the frequency of these malignant tumors rose to 50% in the antrum and 65% in the squamous mucosa at the 36th week. Conclusion: The reflux of duodenal contents through the pylorus enhanced the development of proliferative lesions, benign and malignant, in the glandular stomach and in the forestomach of rats.

Thymic lymphomas in Wistar rats exposed to N-methyl-N-nitrosourea (MNU)

The Brazilian Agency for the Environment (IBAMA) recently adopted an alternative medium-term multiple-organ assay system with the Wistar rat strain for detection of the carcinogenic potential of pesticides. Originally, this initiation-promotion protocol was established in Japan with the isogenic Fischer 344 male rat. Among the initiating agents used in that assay, N-methyl-N-nitrosourea (MNU) rapidly induces malignant lymphoma and leukemia and early mortality of rats from different strains. This study was developed to evaluate whether the outbred Wistar rats are also similarly susceptible to MNU. Particularly, it aimed to evaluate the dose-response relationship and to register the MNUinduced pre-neoplasia and neoplasia that may develop in the lympho-hematopoietic system (LHS) of the Wistar rat within a medium-term period. Four groups of male Wistar rats were treated during 2 weeks with vehicle or with MNU (80, 160 or 240 mg/kg body weight, i.p.). After sacrifice at the 12th and 20th weeks, the thymus, spleen, bone marrow, cervical and mesenteric lymph nodes and liver were collected for analysis. At the 20th week, LHS malignant tumors and benign vascular tumors occurred only in the high- and intermediate-dose MNU-treated animals. Four animals treated with 240 mg/kg developed diffuse thymic lymphomas; two others, treated respectively with 240 mg/kg and 160 mg/kg, developed spleen hemangiomas. The present observations indicate that the Wistar strain is as susceptible as other strains to the early development of MNU-induced LHS (pre)neoplasia. Therefore, this strain seems suitable to be used as test system in bioassay protocols that adopt MNU as an initiating agent for carcinogenesis.

Modifying Effects of Lemongrass Essential Oil on Specific Tissue Response to the Carcinogen N-Methyl-N-Nitrosurea in Female BALB/c Mice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of methyl methacrylate monomer on bond strength of denture base resin to acrylic teeth

Bond failures at the acrylic teeth and denture base resin interface are still a common clinical problem in prosthodontics. The effect of methyl methacrylate (MMA) monomer on the bond strength of three types of denture base resins (Acron MC, Lucitone 550 and QC-20) to two types of acrylic teeth (Biotone and Trilux) was evaluated. Twenty specimens were produced for each denture base resin/acrylic tooth combination and were randomly divided into control (acrylic teeth received no surface treatment) and experimental groups (MMA was applied to the surface of the acrylic teeth for 180 s) and were submitted to shear tests (1 mm/mm). Data (MPa) were analyzed using three-way ANOVA/Student's test (alpha = 0.05). MMA increased the bond strength of Lucitone denture base resins and decreased the bond strength of QC-20. No difference was detected for the bond strength of Acron MC base resin after treatment with MMA. (C) 2008 Elsevier Ltd. All rights reserved.

Prostate carcinogenesis induced by N-methyl-N-nitrosourea (mnu) in gerbils: Histopathological diagnosis and potential invasiveness mediated by extracellular matrix components

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization and catalytic activity of iron(III) mono(4-N-methyl pyridyl)-tris(halophenyl) porphyrins in homogeneous and heterogeneous systems

The synthesis, characterization and catalytic activity of the cationic iron porphyrins Fe[M(4-N-MePy)TDCPP]Cl-2 and Fe[M(4-N-MePy)TFPP]Cl-2 in the epoxidation of (Z)-cyclooctene by PhIO in homogeneous solution and supported on silica gel (SG), imidazole propyl gel (IPG) or SG modified with 2-(4-sulfonatophenyl)ethyl groups (SiSO3) have been accomplished. When supported on IPG, both cationic FeP bind to the support via Fe-imidazole coordination. Fe[M(4-N-MePy)TDCPP]IPG contains a mixture of low-spin bis-coordinated (FeP)-P-III and high-spin mono-coordinated (FeP)-P-III species, whereas Fe[M(4-N-MePy)TFPP]IPG only contains high-spin mono-coordinated (FeP)-P-III. These FePIPG catalysts also contain (FeP)-P-II species, whose presence was confirmed by EPR spectroscopy using NO as a paramagnetic probe. Both cationic FePs coordinate to SG through Fe-O ligation and they are present as high-spin (FeP)-P-III species. The cationic FePs supported on SiSO3- are also high-spin (FeP)-P-III species and they bind to the support via electrostatic interaction between the 4-N-methylpyridyl groups and the SO3- groups present on the matrix. In homogeneous solution, both Fe[M(4-N-MePy)TDCPP]Cl-2 and Fe[M(4-N-MePy)TFPP]Cl-2 have similar catalytic activity to Fe(TDCPP)Cl and Fe(TFPP)Cl, leading to cis-epoxycyclooctane yields of 92%. When supported on inorganic matrices,both FePs lead to epoxide yields comparable to their homogeneous analogues and their anchoring enables catalyst recovery and re-use. Recycling of Fe[M(4-N-MePy)TDCPP]SiSO3- shows that this FeP maintains its activity in a second reaction. (C) 1999 Elsevier B.V. B.V. All rights reserved.

Fluorescence study of the interaction between metal ions and methyl methacrylate methacrylic acid copolymers in aqueous solutions: thallium(I), calcium(II), and terbium(III)

The binding of the cations thallium(I), calcium(II) and terbium(III) to methyl methacrylate-methacrylic acid copolymers with different fractions of acid groups (x) has been studied in aqueous solution at, various pH values using the fluorescence of covalently bonded 9-vinyl anthracene as a probe. In all cases, the extent of binding increases as a function of the charge of the polymer with either increasing fraction of carboxylic acids or of pH. However, differences are observed in the behavior of the three cations, With Tl(I), quenching of the anthracene group fluorescence is observed. indicating that the thallium(I) approaches the probe and suggesting that the alkylanthracene is probably in a relatively polar region. Binding constants have been determined from anthracene quenching data and from studies with the fluorescent-probe sodium pyrenetetrasulfonate, Good agreement is obtained between the two methods, and values for the binding constants increase from 250 to 950 M-1 as x increases from 0.39 to 1. It is suggested that the cation is held in the polyelectrolyte domain, partly by Debye-Huckel effects and partly by more specific interactions. Stronger binding is found with calcium(II) and terbium(III), and in this case increases in fluorescence intensity are observed on complexation due to the anthracene group being in a more hydrophobic region, probably as a result of conformational changes in the polymer chain. In the former case the stoichiometry of the interaction was determined from the fluorescence data to involve two carboxylate groups bound per calcium. Association constants were found using murexide as an indicator of free calcium to vary from 8400 to 37 000 M-1 as x increases from 0.39 to 1. It is suggested that in this case specific calcium(II)-carboxylate interactions contribute to the binding. With terbium(III), a greater increase in the probe fluorescence intensity was observed than with calcium, and it is suggested that the interaction with the polymer is even stronger, leading to a more pronounced conformational change in the polymer. It is proposed that the terbium(III) interacts with sis carboxylic groups on the polymer chain, with three being coordinated and three attracted by electrostatic interactions.

Morphological, mechanical and thermal properties of nylon 6/ABS blends using glycidyl methacrylate-methyl methacrylate copolymers

Nylon6 is an attractive polymer for engineering applications because it has reactive functionality through amine and carboxyl end groups that are capable of reacting. For this reason, it has been used a lot in polymeric blends. Blends of nylon6/ABS (acrylonitrile-butadiene-styrene) were produced using glycidyl methacrylate-methyl methacrylate (GMA-MMA) copolymers as compatibilizer. The binary blends were immiscible and exhibited poor mechanical properties that stemmed from the unfavorable interactions among their molecular segments. This produced an unstable coarse phase morphology and weak interfaces between the phases in the solid state. The presence of the copolymer in the blends clearly led to a more efficient dispersion of the ABS phase and consequently optimized Izod impact properties. However, the compatibilized blend showed poor toughness at room temperature and failed in a brittle manner at subambient temperatures. © 2005 Springer Science + Business Media, Inc.

Synthesis, structure, and thermal stability of poly(methyl methacrylate)-co- poly(3-tri(methoxysilyil)propyl methacrylate)/ montmorillonite nanocomposites

The structure and the thermodegradation behavior of both poly(methyl methacrylate)-co-poly(3-tri(methoxysilyil)propyl methacrylate) polymer modified with silyl groups and of intercalated poly(methyl methacrylate)-co-poly(3- tri(methoxysilyil)propyl methacrylate)/Cloisite 15A™ nanocomposite have been in situ probed. The structural feature were comparatively studied by Fourier transform infrared spectroscopy (FTIR), 13C and 29Si nuclear magnetic resonance (NMR), and small angle X-ray scattering (SAXS) measurements. The intercalation of polymer in the interlayer galleries was evidenced by the increment of the basal distance from 31 to 45 Å. The variation of this interlayer distance as function of temperature was followed by in situ SAXS. Pristine polymer decomposition pathway depends on the atmosphere, presenting two steps under air and three under N2. The nanocomposites are more stable than polymer, and this thermal improvement is proportional to the clay loading. The experimental results indicate that clay nanoparticles play several different roles in polymer stabilization, among them, diffusion barrier, charring, and suppression of degradation steps by chemical reactions between polymer and clay. Charring is atmosphere dependent, occurring more pronounced under air. © 2012 Society of Plastics Engineers.

Ação de fungicidas e acibenzolar-se-methyl no controle da pinta preta do tomateiro

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Protective effect of gamma-tocopherol-enriched diet on N-methyl-N-nitrosourea-induced epithelial dysplasia in rat ventral prostate

Despite recent advances in understanding the biological basis ofprostate cancer (PCa), the management of this disease remains a challenge. Chemoprotective agents have been usedto protect against or eradicateprostatemalignancies. Here, we investigated the protective effect of -tocopherol on N-methyl-N-nitrosourea (MNU)-induced epithelial dysplasia in the rat ventral prostate (VP). Thirty-two male Wistar rats were divided into four groups (n=8): control (CT): healthy control animals fed a standard diet; control+-tocopherol (CT+T): healthy control animals without intervention fed a -tocopherol-enriched diet (20mg/kg); N-methyl-N-nitrosourea (MNU): rats that received a single dose of MNU (30mg/kg) plus testosterone propionate (100mg/kg) and were fed a standard diet; and MNU+-tocopherol (MNU+T): rats that received the same treatment of MNU plus testosterone and were fed with a -tocopherol-enriched diet (20mg/kg). After 4months, the VPs were excised to evaluate morphology, cell proliferation and apoptosis, as well as cyclooxygenase-2 (Cox-2), glutathione-S-transferase-pi (GST-pi) and androgen receptor (AR) protein expression, and matrix metalloproteinase-9 (MMP-9) activity. An increase in the incidence of epithelial dysplasias, such as stratified epithelial hyperplasia and squamous metaplasia, in the MNU group was accompanied by augmented cell proliferation, GST-pi and Cox-2 immunoexpression and pro-MMP-9 activity. Stromal thickening and inflammatory foci were also observed. The administration of a -tocopherol-enriched diet significantly attenuated the adverse effects of MNU in the VP. The incidence of epithelial dysplasia decreased, along with the cell proliferation index, GST-pi and Cox-2 immunoexpression. The gelatinolytic activity of pro-MMP-9 returned to the levels observed for the CT group. These results suggest that -tocopherol acts as a protective agent against MNU-induced prostatic disorders in the rat ventral prostate.

Gestational and lactational exposition to Di-N-butyl-phthalate (DBP) increases inflammation and preneoplastic lesions in prostate of wistar rats after carcinogenic N-methyl-N-nitrosourea (MNU) plus testosterone protocol

In the present study, it was evaluated the susceptibility of prostatic lesions in male adult rats exposed to Di-N-butyl-phthalate during fetal and lactational periods and submitted to MNU plus testosterone carcinogenesis protocol. Pregnant females were distributed into four experimental groups: CN (negative control); CMNU (MNU control); TDBP100 (100 mg/kg of DBP); TDBP500 (500 mg/kg of DBP). Females from the TDBP groups received DBP, by gavage, from gestation day 15 (GD15) to postnatal day 21 (DPN21), while C animals received the vehicle (corn oil). CMNU, TDBP100, and TDBP500 groups received a single intraperitoneal injection of MNU (50 mg/kg) on the sixth postnatal week. After that, testosterone cypionate was administered subcutaneously two times a week (2 mg/kg) for 24 weeks. The animals were euthanized on PND220. Distal segment fragments of the ventral (VP) and dorsolateral prostate (DLP) were fixed and processed for histopathological analysis. Protein extracts from ventral prostate were obtained, and western blotting was performed to AR, ERα, MAPK (ERK1/2), and pan-AKT. Stereological analysis showed an increase in the epithelial compartment in TDBP100 and TDBP500 compared to CN. In general, there was increase in the incidence of inflammation and metaplasia/dysplasia in the DBP-treated groups, mainly in DLP, compared to CN and CMNU. Proliferation index was significant higher in TDBP500 and PIN (prostatic intraepithelial neoplasia) was more frequent in this group compared to CMNU. Western blot assays showed an increase in the expressions of AR and MAPK (ERK1/2) in the TDBP100 compared to CN, and ERα and AKT expressions were higher in the TDBP500 group compared do CN. These results showed that different doses of DBP during prostate organogenesis in Wistar rats could increase the incidence of premalignant lesions in initiated rats inducing distinct biological responses in the adulthood. © 2015 Wiley Periodicals, Inc. Environ Toxicol, 2015.

Stereoselective synthesis of novel diels-alder adducts of p-substituted Methyl Thiocinnamates and Cyclopentadiene

This article describes the Diels-Alder reaction between methyl thiocinnamates, substituted at the para position by electron-donating and electron-withdrawing groups, with cyclopentadiene in the presence of catechol boron bromide (CBB) as a Lewis acid catalyst. The adduct configuration was confirmed by H-1 NMR coupling constants and single-crystal x-ray diffraction. Total endo stereoselectivity was observed in all reactions and was attributed to the effective secondary interaction between the boron atom and the incipient double bond in the norbonene resulting from the planar geometry of the catalyst. C-13 NMR chemical shifts of the coordinated dienophile carbonyl carbons with CBB compared to those of the non coordinated thiocinammates suggest a strong complexation with the catalyst.

THERMORESPONSIVE PROPERTIES OF GOLD HYBRID NANOPARTICLES OF POLY(DI(ETHYLENE GLYCOL) METHYL ETHER METHACRYLATE) (PDEGMA) AND ITS BLOCK COPOLYMERS WITH DIFFERENT ANCHORING REGIMES

Thermo-responsive materials have been of interest for many years, and have been studied mostly as thermally stimulated drug delivery vehicles. Recently acrylate and methacrylates with pendant ethylene glycol methyl ethers been studied as thermo responsive materials. This work explores thermo response properties of hybrid nanoparticles of one of these methacrylates (DEGMA) and a block copolymer with one of the acrylates (OEGA), with gold nanoparticle cores of different sizes. We were interested in the effects of gold core size, number and type of end groups that anchored the chains to the gold cores, and location of bonding sites on the thermo-response of the polymer. To control the number and location of anchoring groups we using a type of controlled radical polymerization called Reversible Addition Fragmentation Transfer (RAFT) Polymerization. Smaller gold cores did not show the thermo responsive behavior of the polymer but the gold cores did seem to self-assemble. Polymer anchored to larger gold cores did show thermo responsivity. The anchoring end group did not alter the thermoresponsivity but thiol-modified polymers stabilized gold cores less well than chains anchored by dithioester groups, allowing gold cores to grow larger. Use of multiple bonding groups stabilized the gold core. Using block copolymers we tested the effects of number of thiol groups and the distance between them. We observed that the use of multiple anchoring groups on the block copolymer with a sufficiently large gold core did not prevent thermo responsive behavior of the polymer to be detected which allows a new type of thermo-responsive hybrid nanoparticle to be used and studied for new applications.

Promising anchoring groups for single-molecule conductance measurements

The understanding of the charge transport through single molecule junctions is a prerequisite for the design and building of electronic circuits based on single molecule junctions. However, reliable and robust formation of such junctions is a challenging task to achieve. In this topical review, we present a systematic investigation of the anchoring group effect on single molecule junction conductance by employing two complementary techniques, namely scanning tunneling microscopy break junction (STM-BJ) and mechanically controllable break junction (MCBJ) techniques, based on the studies published in the literature and important results from our own work. We compared conductance studies for conventional anchoring groups described earlier with the molecular junctions formed through π-interactions with the electrode surface (Au, Pt, Ag) and we also summarized recent developments in the formation of highly conducting covalent Au–C σ-bonds using oligophenyleneethynylene (OPE) and an alkane molecular backbone. Specifically, we focus on the electron transport properties of diaryloligoyne, oligophenyleneethynylene (OPE) and/or alkane molecular junctions composed of several traditional anchoring groups, (dihydrobenzo[b]thiophene (BT), 5-benzothienyl analogue (BTh), thiol (SH), pyridyl (PY), amine (NH2), cyano (CN), methyl sulphide (SMe), nitro (NO2)) and other anchoring groups at the solid/liquid interface. The qualitative and quantitative comparison of the results obtained with different anchoring groups reveals structural and mechanistic details of the different types of single molecular junctions. The results reported in this prospective may serve as a guideline for the design and synthesis of molecular systems to be used in molecule-based electronic devices.