HypatiaSalud. Institucional Repository for the Andalusian Public Health System, Spain

HypatiaSalud will be the freely accessible institutional repository for the Public Health System in Andalucía, Spain. Open access and new technologies have changed dramatically the environment in which research is being conducted and disseminated. Traditionally University has been the universal research provider, but at present time there are Government Organizations, as Public Health Systems, which are large-producers of research. Meanwhile most universities are running institutional repositories or have plans of setting up institutional repositories in the short-term, there are not many Government Organizations working on that direction. In this sense, HypatiaSalud represents an innovative initiative. Objectives: - Enhancing institutional efficiency, effectiveness and opportunities for knowledge exchange. -Expanding access and greater use of research findings to a much wider range of users increasing the visibility and reputation of Andalusian Public Health System. - Providing the foundation for effective gathering and long-term preservation of research output. Methodology. Phase I: Researching and learning from other institutional repositories. Phase II: Designing and planning the financial, organizational, legal and technical underlying issues. Phase III: Launching the service. Phase IV: Running the service. Outcomes. Bibliometrics: catalog of the research output of the Institution, in order to determine the conditions to include this scientific output in the Institutional Repository: direct deposit, deposit after a period of embargo, or closed access when publisher will not grant permission. Promote a mandate for the deposit of all peer-reviewed final drafts (postprints) for institutional record-keeping purposes. Access to that immediate postprint deposit in HypatiaSalud may be set immediately as ‘Open Access’ if copyright conditions allows; otherwise access can be set as ‘Closed Access’. International Standards application: HypatiaSalud will support OAI-PMH and DRIVER, to allow that central repositories could harvest its content or metadata. Development of human resources strategies in order to foster self-archiving through merit acknowledge and accreditation. Conclusions. It seems likely that setting up an Institutional Repository for the Public Health System in Andalucía would have substantial net benefits in the longer term for the Institution, despite the lag between the costs and realisation of benefits.

Modèle et application pour la génération automatique de parcours d'apprentissage personnalisés à partir de sources de confiance

Résumé Lors d'une recherche d'information, l'apprenant est très souvent confronté à des problèmes de guidage et de personnalisation. Ceux-ci sont d'autant plus importants que la recherche se fait dans un environnement ouvert tel que le Web. En effet, dans ce cas, il n'y a actuellement pas de contrôle de pertinence sur les ressources proposées pas plus que sur l'adéquation réelle aux besoins spécifiques de l'apprenant. A travers l'étude de l'état de l'art, nous avons constaté l'absence d'un modèle de référence qui traite des problématiques liées (i) d'une part aux ressources d'apprentissage notamment à l'hétérogénéité de la structure et de la description et à la protection en terme de droits d'auteur et (ii) d'autre part à l'apprenant en tant qu'utilisateur notamment l'acquisition des éléments le caractérisant et la stratégie d'adaptation à lui offrir. Notre objectif est de proposer un système adaptatif à base de ressources d'apprentissage issues d'un environnement à ouverture contrôlée. Celui-ci permet de générer automatiquement sans l'intervention d'un expert pédagogue un parcours d'apprentissage personnalisé à partir de ressources rendues disponibles par le biais de sources de confiance. L'originalité de notre travail réside dans la proposition d'un modèle de référence dit de Lausanne qui est basé sur ce que nous considérons comme étant les meilleures pratiques des communautés : (i) du Web en terme de moyens d'ouverture, (ii) de l'hypermédia adaptatif en terme de stratégie d'adaptation et (iii) de l'apprentissage à distance en terme de manipulation des ressources d'apprentissage. Dans notre modèle, la génération des parcours personnalisés se fait sur la base (i) de ressources d'apprentissage indexées et dont le degré de granularité en favorise le partage et la réutilisation. Les sources de confiance utilisées en garantissent l'utilité et la qualité. (ii) de caractéristiques de l'utilisateur, compatibles avec les standards existants, permettant le passage de l'apprenant d'un environnement à un autre. (iii) d'une adaptation à la fois individuelle et sociale. Pour cela, le modèle de Lausanne propose : (i) d'utiliser ISO/MLR (Metadata for Learning Resources) comme formalisme de description. (ii) de décrire le modèle d'utilisateur avec XUN1 (eXtended User Model), notre proposition d'un modèle compatible avec les standards IEEE/PAPI et IMS/LIP. (iii) d'adapter l'algorithme des fourmis au contexte de l'apprentissage à distance afin de générer des parcours personnalisés. La dimension individuelle est aussi prise en compte par la mise en correspondance de MLR et de XUM. Pour valider notre modèle, nous avons développé une application et testé plusieurs scenarii mettant en action des utilisateurs différents à des moments différents. Nous avons ensuite procédé à des comparaisons entre ce que retourne le système et ce que suggère l'expert. Les résultats s'étant avérés satisfaisants dans la mesure où à chaque fois le système retourne un parcours semblable à celui qu'aurait proposé l'expert, nous sommes confortées dans notre approche.

Inter-rater agreement and reliability of the COSMIN (COnsensus-based Standards for the selection of health status Measurement Instruments) Checklist

Background: The COSMIN checklist is a tool for evaluating the methodological quality of studies on measurement properties of health-related patient-reported outcomes. The aim of this study is to determine the inter-rater agreement and reliability of each item score of the COSMIN checklist (n = 114). Methods: 75 articles evaluating measurement properties were randomly selected from the bibliographic database compiled by the Patient-Reported Outcome Measurement Group, Oxford, UK. Raters were asked to assess the methodological quality of three articles, using the COSMIN checklist. In a one-way design, percentage agreement and intraclass kappa coefficients or quadratic-weighted kappa coefficients were calculated for each item. Results: 88 raters participated. Of the 75 selected articles, 26 articles were rated by four to six participants, and 49 by two or three participants. Overall, percentage agreement was appropriate (68% was above 80% agreement), and the kappa coefficients for the COSMIN items were low (61% was below 0.40, 6% was above 0.75). Reasons for low inter-rater agreement were need for subjective judgement, and accustom to different standards, terminology and definitions.Conclusions: Results indicated that raters often choose the same response option, but that it is difficult on item level to distinguish between articles. When using the COSMIN checklist in a systematic review, we recommend getting some training and experience, completing it by two independent raters, and reaching consensus on one final rating. Instructions for using the checklist are improved.

Protocol of the COSMIN study: consensus-based standards for the selection of health measurement instruments

Background: Choosing an adequate measurement instrument depends on the proposed use of the instrument, the concept to be measured, the measurement properties (e.g. internal consistency, reproducibility, content and construct validity, responsiveness, and interpretability), the requirements, the burden for subjects, and costs of the available instruments. As far as measurement properties are concerned, there are no sufficiently specific standards for the evaluation of measurement properties of instruments to measure health status, and also no explicit criteria for what constitutes good measurement properties. In this paper we describe the protocol for the COSMIN study, the objective of which is to develop a checklist that contains COnsensus-based Standards for the selection of health Measurement INstruments, including explicit criteria for satisfying these standards. We will focus on evaluative health related patient-reported outcomes (HR-PROs), i.e. patient-reported health measurement instruments used in a longitudinal design as an outcome measure, excluding health care related PROs, such as satisfaction with care or adherence. The COSMIN standards will be made available in the form of an easily applicable checklist.Method: An international Delphi study will be performed to reach consensus on which and how measurement properties should be assessed, and on criteria for good measurement properties. Two sources of input will be used for the Delphi study: (1) a systematic review of properties, standards and criteria of measurement properties found in systematic reviews of measurement instruments, and (2) an additional literature search of methodological articles presenting a comprehensive checklist of standards and criteria. The Delphi study will consist of four (written) Delphi rounds, with approximately 30 expert panel members with different backgrounds in clinical medicine, biostatistics, psychology, and epidemiology. The final checklist will subsequently be field-tested by assessing the inter-rater reproducibility of the checklist.Discussion: Since the study will mainly be anonymous, problems that are commonly encountered in face-to-face group meetings, such as the dominance of certain persons in the communication process, will be avoided. By performing a Delphi study and involving many experts, the likelihood that the checklist will have sufficient credibility to be accepted and implemented will increase.

Development of Abutment Design Standards for Local Bridge Designs, Volume 1 of 3, Development of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume (this volume) summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 3 of 3, Verification of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume (this volume) provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 2 of 3, Design Manual, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume (this volume) introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Chimioradiothérapie postopératoire des cancers des voies aérodigestives : vers un nouveau standard [Post-operative radiochemotherapy of the head and neck: Towards new standards?]

Head and neck squamous cell carcinomas are frequently diagnosed at an advanced stage. Their treatment remains controversial, and has to be multidisciplinary. External beam radiotherapy is a recognized treatment option after radical curative surgery in order to improve local control. Different adjuvant treatment options have been studied in order to improve the outcome of these patients. We review in this paper the different prognostic factors indicating an adjuvant treatment and the interest of treatment intensification in bad prognostic patients.

Semantic web adoption: online tools for web evaluation and metadata extraction

This work briefly analyses the difficulties to adopt the Semantic Web, and in particular proposes systems to know the present level of migration to the different technologies that make up the Semantic Web. It focuses on the presentation and description of two tools, DigiDocSpider and DigiDocMetaEdit, designed with the aim of verifYing, evaluating, and promoting its implementation.

Considerations on the ASTM Standards 1789-04 and 1422-05 on the Forensic Examination of Ink

The ASTM standards on Writing Ink Identification (ASTM 1789-04) and on Writing Ink Comparison (ASTM 1422-05) are the most up-to-date guidelines that have been published on the forensic analysis of ink. The aim of these documents is to cover most aspects of the forensic analysis of ink evidence, from the analysis of ink samples, the comparison of the analytical profile of these samples (with the aim to differentiate them or not), through to the interpretation of the result of the examination of these samples in a forensic context. Significant evolutions in the technology available to forensic scientists, in the quality assurance requirements brought onto them, and in the understanding of frameworks to interpret forensic evidence have been made in recent years. This article reviews the two standards in the light of these evolutions and proposes some practical improvements in terms of the standardization of the analyses, the comparison of ink samples, and the interpretation of ink examination. Some of these suggestions have already been included in a DHS funded project aimed at creating a digital ink library for the United States Secret Service.

NRS State Data Quality Standards Checklist, 2002

The NRS state data quality standards identify the policies, processes and materials that states and local programs should have in place to collect valid and reliable data for the National Reporting System (NRS). The Division of Adult Education (DAEL) within the Office of Vocational and Adult Education developed the standards to define the characteristics of high quality state and local data collection systems for the NRS. The standards provide an organized way for DAEL to understand the quality of NRS data collection within the states and also provide guidance to states on how to improve their systems. States are to complete this checklist, which incorporates the standards, with their annual NRS data submission to rate their level of implementation of the standards. The accompanying policy document describes DAEL’s requirements for state conformance to the standards and explains the use of the information from this checklist.

Standards Culturais: Brasil X Portugal

A Cultura pode ser definida de várias maneiras e cada autor tem uma visão própria do termo mas, genericamente, cultura pode ser entendida como o conjunto de características humanas que não são inatas e que se criam, preservam ou aprimoram com o convívio na sociedade, com a comunicação e cooperação entre indivíduos. Os membros de uma sociedade não estão conscientes dos seus valores culturais e somente percebem estes valores quando entram em “choque” com uma cultura diferente. Estas diferenças culturais podem criar confusões e mal-entendidos. As culturas Portuguesa e a Brasileira parecem ser bastante semelhantes: a mesma língua, as mesmas crenças, religião predominantemente católica e alimentos similares. Porém, apesar das semelhanças, e após entrevistas de carácter narrativo, observou-se nestas duas culturas características próprias e que muitas vezes foram necessárias adaptações para uma melhor integração na sociedade. Esta tese de mestrado é uma análise das diferenças culturais entre Portugal e Brasil e tem por objectivo encontrar standards culturais de ambos os países podendo ser um instrumento de ajuda para aqueles que vêm do Brasil para Portugal, e vice-versa, para trabalharem ou abrirem uma empresa. Os standards culturais encontrados, após análise comparativa, estão relacionados com a maneira de ver a vida, de ultrapassar os problemas e pressões do dia a dia, com colectivismo, hierarquia, simpatia, preocupação com o cliente, ansiedade face à incerteza e profissionalismo. Este trabalho termina com a identificação dos standards culturais e com dicas para aqueles que saem do seu país e recomeçam a sua vida noutro com cultura diferente