Nonlinear optics from an ab initio approach by means of the dynamical Berry phase: Application to second- and third-harmonic generation in semiconductors

We present an ab initio real-time-based computational approach to study nonlinear optical properties in condensed matter systems that is especially suitable for crystalline solids and periodic nanostructures. The equations of motion and the coupling of the electrons with the external electric field are derived from the Berry-phase formulation of the dynamical polarization [Souza et al., Phys. Rev. B 69, 085106 (2004)]. Many-body effects are introduced by adding single-particle operators to the independent-particle Hamiltonian. We add a Hartree operator to account for crystal local effects and a scissor operator to correct the independent particle band structure for quasiparticle effects. We also discuss the possibility of accurately treating excitonic effects by adding a screened Hartree-Fock self-energy operator. The approach is validated by calculating the second-harmonic generation of SiC and AlAs bulk semiconductors: an excellent agreement is obtained with existing ab initio calculations from response theory in frequency domain [Luppi et al., Phys. Rev. B 82, 235201 (2010)]. We finally show applications to the second-harmonic generation of CdTe and the third-harmonic generation of Si. 

Water efficiency as a means of reducing carbon emissions in Northern Ireland (NI) Water

The water and sewerage sectors' combined emissions account for just over 1% of total UK emissions, while household water heating accounts for a further 5%. Energy use, particularly electricity, is the largest source of emissions in the sector. Water efficiency measures should therefore result in reduced emissions from a lower demand for water and wastewater treatment and pumping, as well as from decreased domestic water heating. Northern Ireland Water (NI Water) is actively pursuing measures to reduce its carbon footprint. This paper investigated the carbon impacts of implementing a household water efficiency programme in Northern Ireland. Assuming water savings of 59.6 L/prop/day and 15% uptake among households, carbon savings of 0.6% of NI Water's current net operational emissions are achievable from reduced treatment and pumping. Adding the carbon savings from reduced household water heating gives savings equivalent to 6.2% of current net operational emissions. Cost savings to NI Water are estimated as 300,000 per year. The cost of the water efficiency devices is approximately 1.6 million, but may be higher depending on the number of devices distributed relative to the number installed. This paper has shown clear carbon benefits to water efficiency, but further research is needed to examine social and cost impacts. © IWA Publishing 2013.

Magnetic mirror cavities as terahertz radiation sources and a means of quantifying radiation friction

We propose a radiation source based on a magnetic mirror cavity. Relativistic electrons are simulated entering the cavity and their trajectories and resulting emission spectra are calculated. The uniformity of the particle orbits is found to result in a frequency comb in terahertz range, the precise energies of which are tunable by varying the electron's gamma-factor. For very high energy particles, radiation friction causes the spectral harmonics to broaden and we suggest this as a possible way to verify competing classical equations of motion.

Value capture: a valid means of funding PPPs?

This paper considers the use of value capture (VC) as a means of financing public-private partnerships (PPPs) in the United Kingdom (UK). Although some VC techniques are used in the UK, they are employed more widely in the United States of America. After considering the traditional approach to financing UK PPPs, this paper describes the main VC finance instruments. The findings of a series of case studies are then presented and conclusions drawn. While VC financing may prove unpopular with those bearing the cost of infrastructure improvements, it is recommended that such instruments are considered by UK policy makers.

An Evaluation of Vaneless Diffuser Modelling Methods as a Means of Improving the Off-Design Performance Prediction of Centrifugal Compressors

An evaluation of existing 1-D vaneless diffuser design tools in the context of improving the off-design performance prediction of automotive turbocharger centrifugal compressors is described. A combination of extensive gas stand test data and single passage CFD simulations have been employed in order to permit evaluation of the different methods, allowing conclusions about the relative benefits and deficiencies of each of the different approaches to be determined. The vaneless diffuser itself has been isolated from the incumbent limitations in the accuracy of 1-D impeller modelling tools through development of a method to fully specify impeller exit conditions (in terms of mean quantities) using only standard test stand data with additional interstage static pressure measurements at the entrance to the diffuser. This method allowed a direct comparison between the test data and 1-D methods through sharing common inputs, thus achieving the aim of diffuser isolation.

Crucial to the accuracy of determining the performance of each of the vaneless diffuser configurations was the ability to quantify the presence and extent of the spanwise aerodynamic blockage present at the diffuser inlet section. A method to evaluate this critical parameter using CFD data is described herein, along with a correlation for blockage related to a new diffuser inlet flow parameter ⚡, equal to the quotient of the local flow coefficient and impeller tip speed Mach number. The resulting correlation permitted the variation of blockage with operating condition to be captured.

Time-lapse Monitoring of the Slopes of a Heritage Earthwork by Means of Near-surface Seismic Techniques

A significant portion of UK’s infrastructures earthworks was built more than 100 years ago, without modern construction standards: poor maintenance and the change of precipitations pattern experienced in the past decades are currently compromising their stability, leading to an increasing number of failures. To address the need for a reliable and time-efficient monitoring of earthworks at risk of failure we propose here the use of two established seismic techniques for the characterization of the near surface, MASW and P-wave refraction. We have regularly collected MASW and P-wave refraction data, from March 2014 to February 2015, along 4 reduced-scale seismic lines located on the flanks of a heritage railway embankment located in Broadway, SW of England. We have observed a definite temporal variability in terms of phase velocities of SW dispersion curves and of P-wave travel times. The accurate choice of ad-hoc inversion strategies has allowed to reconstruct reliable VP and VS models through which it is potentially possible to track the temporal variations of geo-mechanical properties of the embankment slopes. The variability over time of seismic data and seismic velocities seems to correlate well with rainfall data recorded in the days immediately preceding the date of acquisition.

Applying the motivation-hygiene theory as a means of measuring learner satisfaction with blended learning courses in higher education

This study describes research on a postgraduate blended learning programme within the Department of Education at the University of Aveiro in Portugal. It is based on a multi-philosophical paradigm and examines students‟ satisfaction levels through the application of Herzberg‟s Motivation and Hygiene Theory. The main question being addressed in this research is: “Can the Motivation and Hygiene Theory be adopted as a means to measure student satisfaction with their blended learning environment?” Embedded within this research question are four fundamental questions which set the scene for the development of this research study and are explored in greater detail in Chapters 4 and 5 respectively: 1. What are the factors responsible for bringing about learning satisfaction with their b-Learning course? 2. What are the factors responsible for bringing about learning dissatisfaction with their b-Learning course? 3. Can these factors be represented as Motivation and Hygiene factors? 4. Will this method of measuring learning satisfaction lead to a set of guidelines that could be considered as a framework for the development of b-Learning courses? The results indicate that the Motivation and Hygiene Theory or an adapted version such as the Enricher and Enabler Theory proposed in this study could be considered as a plausible means of analysing an institution‟s b-Learning processes. The opportunity to carry out future research is evident and can be varied depending on the research objectives in mind. Examples where further exploration would be beneficial lay within the application of this theory to the wider sector; the use of larger samples, focusing on the teachers, as well as the learners and the application of Web 2.0 technologies as means of gathering information. The results of this research will be of great significance to those areas of education that are interested in locating quick and efficient means by which to evaluate their b-Learning and to no lesser extent e-Learning environments.

PP1 interactomes as a means of characterizing protein functions

A maioria das funções celulares, incluindo expressão de genes, crescimento e proliferação celulares, metabolismo, morfologia, motilidade, comunicação intercelular e apoptose, é regulada por interações proteína-proteína (IPP). A célula responde a uma variedade de estímulos, como tal a expressão de proteínas é um processo dinâmico e os complexos formados são constituídos transitoriamente mudando de acordo com o seu ciclo funcional, adicionalmente, muitas proteínas são expressas de uma forma dependente do tipo de célula. Em qualquer instante a célula pode conter cerca de centenas de milhares de IPPs binárias, e encontrar os companheiros de interação de uma proteína é um meio de inferir a sua função. Alterações em redes de IPP podem também fornecer informações acerca de mecanismos de doença. O método de identificação binário mais frequentemente usado é o sistema Dois Hibrido de Levedura, adaptado para rastreio em larga escala. Esta metodologia foi aqui usada para identificar os interactomas específicos de isoforma da Proteína Fosfatase 1 (PP1), em cérebro humano. A PP1 é uma proteína fosfatase de Ser/Thr envolvida numa grande variedade de vias e eventos celulares. É uma proteína conservada codificada por três genes, que originam as isoformas α, β, e γ, com a última a originar γ1 e γ2 por splicing alternativo. As diferentes isoformas da PP1 são reguladas pelos companheiros de interação – proteínas que interagem com a PP1 (PIPs). A natureza modular dos complexos da PP1, bem como a sua associação combinacional, gera um largo reportório de complexos reguladores e papéis em circuitos de sinalização celular. Os interactomas da PP1 específicos de isofoma, em cérebro, foram aqui descritos, com um total de 263 interações identificadas e integradas com os dados recolhidos de várias bases de dados de IPPs. Adicionalmente, duas PIPs foram selecionadas para uma caracterização mais aprofundada da interação: Taperina e Sinfilina-1A. A Taperina é uma proteína ainda pouco descrita, descoberta recentemente como sendo uma PIP. A sua interação com as diferentes isoformas da PP1 e localização celulares foram analisadas. Foi descoberto que a Taperina é clivada e que está presente no citoplasma, membrana e núcleo e que aumenta os níveis de PP1, em células HeLa. Na membrana ela co-localiza com a PP1 e a actina e uma forma mutada da Taperina, no motivo de ligação à PP1, está enriquecida no núcleo, juntamente com a actina. Mais, foi descoberto que a Taperina é expressa em testículo e localiza-se na região acrossómica da cabeça do espermatozoide, uma estrutura onde a PP1 e a actina estão também presentes. A Sinfilina-1A, uma isoforma da Sinfilina-1, é uma proteína com tendência para agregar e tóxica, envolvida na doença de Parkinson. Foi mostrado que a Sinfilina-1A liga às isoformas da PP1, por co-transformação em levedura, e que mutação do seu motivo de ligação à PP1 diminuiu significativamente a interação, num ensaio de overlay. Quando sobre-expressa em células Cos-7, a Sinfilina-1A formou corpos de inclusão onde a PP1 estava presente, no entanto a forma mutada da Sinfilina-1A também foi capaz de agregar, indicando que a formação de inclusões não foi dependente de ligação à PP1. Este trabalho dá uma nova perspetiva dos interactomas da PP1, incluindo a identificação de dezenas de companheiros de ligação específicos de isoforma, e enfatiza a importância das PIPs, não apenas na compreensão das funções celulares da PP1 mas também, como alvos de intervenção terapêutica.

Reduction vs acetalisation of some carbonyl-compounds by means of methylselenol and lewis-acids

Aliphatic ketones and aromatic carbonyl compounds on reaction with methylselenol :and a Lewis acid, are shown to undergo acetalisation and/or reduction to methyl selenide, the unexpected reduction reaction being predominant in most cases.