865 resultados para Load test on SPT sampler


Relevância:

100.00% 100.00%

Publicador:

Resumo:

O presente trabalho teve como objectivo a minimização do impacto ambiental do processo de curtume da pele de bovino. A indústria de curtumes transforma a pele, material putrescível, em couro, material nobre, termicamente estável e imputrescível. A transformação da pele em couro origina uma carga poluente apreciável quer quanto a efluentes líquidos quer quanto a resíduos sólidos. O fluxo produtivo da indústria de curtumes pode dividir-se em quatro sectores: ribeira, curtume, tinturaria e acabamento, sendo que os três primeiros geram efluentes líquidos com elevada carga poluente. Neste trabalho, foram avaliadas as fases do processo que geram efluentes líquidos: molho, caleiro, curtume e tinturaria. Na avaliação do processo do molho testou-se uma protease e uma lipase contra um molhante e um desengordurante tradicional, agentes químicos normalmente utilizados no molho mas menos biodegradáveis que as enzimas testadas. Salienta-se o bom resultado obtido quanto à eficiência do molho Na avaliação do processo de caleiro testaram-se várias alternativas no sentido da redução da quantidade de sulfureto de sódio utilizada e da minimização da carga poluente. Entre as alternativas, depilação por oxidação, depilação enzimática com e sem destruição do pêlo, elegeu-se a depilação enzimática sem destruição do pêlo que conduziu a resultados com menor impacto ambiental, nomeadamente a redução da % da quantidade de sulfureto de sódio, sendo a redução da carga poluente de 4,19 % de sulfureto, 32.80% de sólidos suspensos totais (SST),27.09% de sólidos totais (ST) e de 76.90% da carência química de oxigénio (CQO) no efluente de caleiro. No processo do curtume da pele é utilizado crómio como agente de curtume em cerca de 80% das peles tratadas, sendo este metal problemático em termos ambientais. No sentido de reduzir a quantidade de crómio utilizada no processo foi realizado um planeamento factorial onde as variáveis a estudar foram a concentração de crómio e a temperatura, tendo este como objectivo observar qual a quantidade mínima de crómio necessária para termos um produto final nas condições desejadas e gerando um menor impacto ambiental. Concluiu-se desenvolvendo um processo que mostra ser possível reduzir a quantidade de sal de crómio de 7% para 5%, além de ter um impacto ambiental claramente menos agressivo nos efluentes de curtume gerado. Este processo quando comparado com o processo tradicional permite a redução de 27% na CQO, 79% nos SST, 11% nos ST e 38% no teor de crómio Na avaliação do processo de tinturaria foi estudado um processo compacto contra o processo tradicional, tendo-se concluído pelo menor impacto ambiental do processo estudado, nomeadamente ao nível da redução do consumo de água e da carga poluente gerada. A comparação dos dois processos, no que respeita à carga poluente gerada, permitiu concluir por uma redução de 39% da CQO, 50% dos SST, e 12% dos ST quando aplicado o processo compacto Por fim foi feita uma avaliação do impacto ambiental do efluente global gerado pelos processos considerados com menor impacto ambiental contra o processo tradicional, normalmente aplicado na indústria. A aplicação do conjunto dos processos desenvolvidos, quando comparada com a aplicação do conjunto dos processos tradicionais, mostra uma redução de 1% no sulfureto, 40% na CQO, 60 % nos SST, 42 % no crómio e 11% nos ST, mostrando claramente que é possível reduzir a carga poluente da indústria de curtumes atuando no processo. Este trabalho mostrou a importância de atuar no processo para minimizar os custos de tratamento e mesmo de investimento dos efluentes da indústria de curtumes. Importa salientar que os processos desenvolvidos necessitam de validação a uma escala semi-industrial.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introduction: The prevalence of coronary artery disease (CAD) is ever increasing in western industrialized societies. An individuals overall risk for CAD may be quantified by integrating a number of factors including, but not limited to, cardiorespiratory fitness, body composition, blood lipid profile and blood pressure. It might be expected that interventions aimed at improving any or all of these independent factors might improve an individual 's overall risk. To this end, the influence of standard endurance type exercise on cardiorespiratory fitness, body composition, blood lipids and blood pressure, and by extension the reduction of coronary risk factors, is well documented. On the other hand, interval training (IT) has been shown to provide an extremely powerful stimulus for improving indices of cardiorespiratory function but the influence of this training type on coronary risk factors is unknown. Moreover, the vast majority of studies investigating the effects of IT on fitness have used laboratory type training protocols. As a result of this, the influence of participation in interval-type recreational sports on cardiorespiratory fitness and coronary risk factors is unknown. Aims: The aim of the present study was to evaluate the effectiveness of recreational ball hockey, a sport associated with interval-type activity patterns, on indices of aerobic function and coronary risk factors in sedentary men in the approximate age range of 30 - 60 years. Individual risk factors were compiled into an overall coronary risk factor score using the Framingham Point Scale (FPS). Methods: Twenty-four sedentary males (age range 30 - 60) participated in the study. Subject activity level was assessed apriori using questionnaire responses. All subjects (experimental and control) were assessed to have been inactive and sedentary prior to participation in the study. The experimental group (43 ± 3 years; 90 ± 3 kg) (n = 11) participated in one season of recreational ball hockey (our surrogate for IT). Member of this group played a total of 16 games during an 11 week span. During this time, the control group (43 ± 2 years; 89 ± 2 kg) (n = 11) performed no training and continued with their sedentary lifestyle. Prior to and following the ball hockey season, experimental and control subjects were tested for the following variables: 1) cardiorespiratory fitness (as V02 Max) 2) blood lipid profile 3) body composition 5) waist to hip ratio 6) blood glucose levels and 7) blood pressure. Subject V02 Max was assessed using the Rockport submaximal walking test on an indoor track. To assess body composition we determined body mass ratio (BMI), % body fat, % lean body mass and waist to hip ratio. The blood lipid profile included high density lipoprotein, low density lipoprotein and total cholesterol levels; in addition, the ratio of total cholesterol to high density was calculated. Blood triglycerides were also assessed. All data were analyzed using independent t - tests and all data are expressed as mean ± standard error. Statistical significance was accepted at p :S 0.05. Results: Pre-test values for all variables were similar between the experimental and control group. Moreover, although the intervention used in this study was associated with changes in some variables for subjects in the experimental group, subjects in the control group did not exhibit any changes over the same time period. BODY COMPOSITION: The % body fat of experimental subjects decreased by 4.6 ± 0.5%, from 28.1 ± 2.6 to 26.9 ± 2.5 % while that of the control group was unchanged at 22.7 ± 1.4 and 22.2 ± 1.3 %. However, lean body mass of experimental and control subjects did not change at 64.3 ± 1.3 versus 66.1 ± 1.3 kg and 65.5 ± 0.8 versus 64.7 ± 0.8 kg, respectively. In terms of body mass index and waist to hip ratio, neither the experimental nor the control group showed any significant change. Respective values for the waist to hip ratio and body mass index (pre and post) were as follows: 1 ± 0.1 vs 0.9 ± 0.1 (experimental) and 0.9 ± 0.1 versus 0.9 ± 0.1 (controls) while for BMI they were 29 ± 1.4 versus 29 ± 1.2 (experimental) and 26 ± 0.7 vs. 26 ± 0.7 (controls). CARDIORESPIRATORY FITNESS: In the experimental group, predicted values for absolute V02 Max increased by 10 ± 3% (i.e. 3.3 ± 0.1 to 3.6 ± 0.1 liters min -1 while that of control subjects did not change (3.4 ± 0.2 and 3.4 ± 0.2 liters min-I). In terms of relative values for V02 Max, the experimental group increased by 11 ± 2% (37 ± 1.4 to 41 ± 1.4 ml kg-l min-I) while that of control subjects did not change (41 ± 1.4 and 40 ± 1.4 ml kg-l min-I). BLOOD LIPIDS: Compared to pre-test values, post-test values for HDL were decreased by 14 ± 5 % in the experiment group (from 52.4 ± 4.4 to 45.2 ± 4.3 mg dl-l) while HDL data for the control group was unchanged (49.7 ± 3.6 and 48.3 ± 4.1 mg dl-l, respectively. On the other hand, LDL levels did not change for either the experimental or control group (110.2 ± 10.4 versus 112.3 ± 7.1 mg dl-1 and 106.1 ± 11.3 versus 127 ± 15.1 mg dl-1, respectively). Further, total cholesterol did not change in either the experimental or control group (181.3 ± 8.7 mg dl-1 versus 178.7± 4.9 mg dl-l) and 190.7 ± 12.2 versus 197.1 ± 16.1 mg dl-1, respectively). Similarly, the ratio of TC/HDL did not change for either the experimental or control group (3.8 ± 0.4 versus 4.5 ± 0.5 and 4 ± 0.4 versus 4.2 ± 0.4, respectively). Blood triglyceride levels were also not altered in either the experimental or control group (100.3 ± 19.6 versus 114.8 ± 15.3 mg dl-1 and 140 ± 23.5 versus 137.3 ± 17.9 mg dl-l, respectively). BLOOD GLUCOSE: Fasted blood glucose levels did not change in either the experimental or control group. Pre- and post-values for experimental and control groups were 92.5 ± 4.8 versus 93.3 ± 4.3 mg dl-l and 92.3 ± 11.3 versus 93.2 ± 2.6 mg dl-1 , respectively. BLOOD PRESSURE: No aspect of blood pressure was altered in either the experimental or control group. For example, pre- and post-test systolic blood pressures were 131 ± 2 versus 129 ± 2 mmHg (experimental) and 123 ± 2 and 125 ± 2 mmHg (controls), respectively. Pre- and post-test diastolic blood pressures were 84 ± 2 and 83 ± 2 mmHg (experimental) and 81 ± 1 versus 82 ± 1 mmHg, respectively. Similarly, calculated pulse pressure was not altered in the experimental or control as pre- and post-test values were 47 ± 1 versus 47 ± 2 mmlHg and 42 ± 2 versus 43 ± 2 mmHg, respectively. FRAMINGHAM POINT SCORE: The concerted changes reported above produced an increased risk in the Framingham Point Score for the subjects in the experimental group. For example, the pre- and post-test FPS increased from 1.4 ± 0.9 to 2.7 ± 0.7. On the other hand, pre- and post-test scores for the control group were 1.8 ± 1 versus 1.8 ± 0.9. Conclusions: Our data confirms previous studies showing that interval-type exercise is a useful intervention for increasing aerobic fitness. Moreover, the increase in V02 Max we found in response to limited participation in ball hockey (i.e. 16 games) suggests that recreational sport may help reduce this aspect of coronary risk in previously sedentary individual. On the other hand, our results showing little or no positive change in body composition, blood lipids or blood pressures suggest that one season of recreational sport in not in of itself a powerful enough stimulus to reduce the overall risk of coronary artery disease. In light of this, it is recommended that, in addition to participation in recreational sport, the performance of regular physical activity is used as an adjunct to provide a more powerful overall stimulus for decreasing coronary risk factors. LIMITATIONS: The increase in the FPS we found for the experimental group, indicative of an increased risk for coronary disease, was largely due to the large decrease in HDL we observed after compared to above one season of ball hockey. In light of the fact that cardiorespiratory fitness was increased and % body fat was decreased, as well as the fact that other parameters such as blood pressure showed positive (but non statistically significant) trends, the possibility that the decrease in HDL showed by our data was anomalous should be considered. FUTURE DIRECTIONS: The results of this study suggesting that recreational sport may be a potentially useful intervention in the reduction of CAD require to be corroborated by future studies specifically employing 1) more rigorous assessment of fitness and fitness change and 2) more prolonged or frequent participants.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Evidence suggests that children with developmental coordination disorder (DCD) have lower levels of cardiorespiratory fitness (CRF) compared to children without the condition. However, these studies were restricted to field-based methods in order to predict V02 peak in the determination of CRF. Such field tests have been criticised for their ability to provide a valid prediction of V02 peak and vulnerability to psychological aspects in children with DCD, such as low perceived adequacy toward physical activity. Moreover, the contribution of physical activity to the variance in V02 peak between the two groups is unknown. The purpose of our study was to determine the mediating role of physical activity and perceived adequacy towards physical activity on V02 peak in children with significant motor impairments. This prospective case-control design involved 122 (age 12-13 years) children with significant motor impairments (n=61) and healthy matched controls (n=61) based on age, gender and school location. Participants had been previously assessed for motor proficiency and classified as a probable DCD (p-DCD) or healthy control using the movement ABC test. V02 peak was measured by a progressive exercise test on a cycle ergometer. Perceived adequacy was measured using a 7 -item subscale from Children's Selfperception of Adequacy and Predilection for Physical Activity scale. Physical activity was monitored for seven days with the Actical® accelerometer. Children with p-DCD had significantly lower V02 peak (48.76±7.2 ml/ffm/min; p:50.05) compared to controls (53.12±8.2 ml/ffm/min), even after correcting for fat free mass. Regression analysis demonstrated that perceived adequacy and physical activity were significant mediators in the relationship between p-DCD and V02 peak. In conclusion, using a stringent laboratory assessment, the results of the current study verify the findings of earlier studies, adding low CRF to the list of health consequences associated with DCD. It seems that when testing for CRF in this population, there is a need to consider the psychological barriers associated with their condition. Moreover, strategies to increase physical activity in children with DCD may result in improvement in their CRF.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

L’insuffisance cardiaque est une pathologie provoquant une diminution importante des capacités fonctionnelles des patients ainsi qu’une diminution drastique de la qualité de vie. L’évaluation des capacités fonctionnelles est généralement effectuée par une épreuve d’effort maximal. Cependant pour plusieurs patients, cet effort est difficile à compléter. Les objectifs de l’étude présentée dans ce mémoire sont : (1) valider trois méthodes d’évaluation de la capacité fonctionnelle et aérobie des sujets souffrant d’insuffisance cardiaque avec un complexe QRS élargi; (2) chercher à établir le profil des patients démontrant une meilleure tolérance à l’exercice malgré une consommation maximale d’oxygène identique; et (3) démontrer les conséquences de la présence et de la magnitude de l’asynchronisme cardiaque dans la capacité fonctionnelle et la tolérance à l’exercice. Tous les sujets ont été soumis à un test de marche de six minutes, un test d’endurance à charge constante sur tapis roulant et à une épreuve d’effort maximal avec mesure d’échanges gazeux à la bouche. Les résultats ont montré une association significative entre les épreuves maximale et plus spécifiquement sous-maximale. De plus, une meilleure tolérance à l’exercice serait associée significativement à une plus grande masse du ventricule gauche. Finalement, les résultats de notre étude n’ont pas montré d’effet d’un asynchronisme cardiaque sur la performance à l’effort tel qu’évalué par nos protocoles.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this article, we use the no-response test idea, introduced in Luke and Potthast (2003) and Potthast (Preprint) and the inverse obstacle problem, to identify the interface of the discontinuity of the coefficient gamma of the equation del (.) gamma(x)del + c(x) with piecewise regular gamma and bounded function c(x). We use infinitely many Cauchy data as measurement and give a reconstructive method to localize the interface. We will base this multiwave version of the no-response test on two different proofs. The first one contains a pointwise estimate as used by the singular sources method. The second one is built on an energy (or an integral) estimate which is the basis of the probe method. As a conclusion of this, the probe and the singular sources methods are equivalent regarding their convergence and the no-response test can be seen as a unified framework for these methods. As a further contribution, we provide a formula to reconstruct the values of the jump of gamma(x), x is an element of partial derivative D at the boundary. A second consequence of this formula is that the blow-up rate of the indicator functions of the probe and singular sources methods at the interface is given by the order of the singularity of the fundamental solution.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this study, we assessed the influence of prey quality and prey biomass during a standardized 3-week test on adult survival and reproductive output of the predatory mite Hypoaspis aculeifer when fed one of six different diets: springtails (Folsomia candida and Folsomia fimetaria), a storage mite (Caloglyphus cf. michaeli), an oligochaete (Enchytraeus crypticus), a nematode (Turbatrix silusiae), and a 1:1:1 mix of F. candida:F.fimetaria:E. crypticus. Our results revealed that a single prey species may be nutritionally sufficient for a 3-week period, as H. aculeifer performed equally well, or better, on a diet based on a 1:1:1 mix of F. candida:F. fimetaria:E. crypticus. However, when fed C. cf. michaeli, H. aculeifer had a poor reproductive output (< 200 juveniles) and a reduced survival (60-70%). Thus, investigators should validate their choice of prey prior to testing H. aculeifer performance during toxicant exposure. (c) 2007 Elsevier B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Progressive telomere shortening from cell division (replicative aging) provides a barrier for human tumor progression. This program is not conserved in laboratory mice, which have longer telomeres and constitutive telomerase. Wild species that do ⁄ do not use replicative aging have been reported, but the evolution of different phenotypes and a conceptual framework for understanding their uses of telomeres is lacking. We examined telomeres ⁄ telomerase in cultured cells from > 60 mammalian species to place different uses of telomeres in a broad mammalian context. Phylogeny-based statistical analysis reconstructed ancestral states. Our analysis suggested that the ancestral mammalian phenotype included short telomeres (< 20 kb, as we now see in humans) and repressed telomerase. We argue that the repressed telomerase was a response to a higher mutation load brought on by the evolution of homeothermy. With telomerase repressed, we then see the evolution of replicative aging. Telomere length inversely correlated with lifespan, while telomerase expression co-evolved with body size. Multiple independent times smaller, shorter-lived species changed to having longer telomeres and expressing telomerase. Trade-offs involving reducing the energetic ⁄ cellular costs of specific oxidative protection mechanisms (needed to protect < 20 kb telomeres in the absence oftelomerase) could explain this abandonment of replicative aging. These observations provide a conceptual framework for understanding different uses of telomeres in mammals, support a role for human-like telomeres in allowing longer lifespans to evolve, demonstrate the need to include telomere length in the analysis of comparative studies of oxidative protection in the biology of aging, and identify which mammals can be used as appropriate model organisms for the study of the role of telomeres in human cancer and aging. Key words: evolution of telomeres; immortalization; telomerase; replicative aging; senescence.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Användandet av mobila applikationer har växt radikalt de senaste åren och de samverkar med många system. Därför ställs det högre krav på kvaliteten och att applikationen ska anpassas till många olika enheter, operativsystem samt plattformar. Detta gör att test av mobila applikationer blivit viktigare och större. Detta arbete har bedrivits som en jämförande fallstudie inom området test av mobila applikationer samt testverktyg. Syftet har varit att beskriva hur testning av mobila applikationer sker idag vilket gjorts genom litteraturstudier och intervjuer med IT-företag. Ett annat syfte har varit att utvärdera fyra testverktyg, deras för- och nackdelar samt hur de kan användas vid testning av mobila applikationer och jämföras mot manuell testning utan testverktyg. Detta har gjorts genom att skapa förstahandserfarenheter baserat på användandet av testverktygen. Under arbetet har vi utgått från mobila applikationer som vi fått tillgång till av Triona, som varit vår samarbetspartner.Idag finns många olika testverktyg som kan användas som stöd för testningen men få företag har implementerat något eftersom det kräver både tid och kompetens samt valet av testverktyg kan vara svårt. Testverktygen har olika för- och nackdelar vilket gör att de passar olika bra beroende på typ av projekt och applikation. Fördelar med att använda testverktyg är möjligheten att kunna automatisera, testa på flera enheter samtidigt samt få tillgång till enheter via molnet. Utmaningarna är att det kan vara svårt att installera och lära sig testverktyget samt att licenserna kan vara dyra. Det är därför viktigt att redan innan implementationen veta vilka tester och applikationer testverktygen ska användas till samt vem som ska använda det. Utifrån vår studie kan slutsatsen dras att inget testverktyg är helt komplett men de kan bidra med olika funktioner vilket effektiviserar delar av testningen av mobila applikationer.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O presente trabalho tem como objetivo estudar o comportamento de camadas superficiais de solo melhorado como base de fundações superficiais. Nesta pesquisa foram realizados ensaios de placa de 30 cm de diâmetro sobre camadas de solo residual compactado e de solo tratado com cimento (teor de 5% de cimento), ambas com 60 cm de espessura. O programa experimental também incluiu a retirada de amostras de campo das camadas de solo melhorado para a execução de ensaios triaxiais drenados (CID) com medida interna de deformações, a fim de obter parâmetros constitutivos para a realização de simulações numéricas. Uma comparação entre os resultados dos ensaios triaxiais com amostras retiradas em campo e moldadas em laboratório (Rohlfes Junior, 1996) é apresentada. A diferença entre os resultados dos ensaios triaxiais com amostras de campo e laboratório foi significativa para o caso das amostras de solo melhorado com cimento, tal fato é atribuído principalmente a dificuldade de mistura em campo. O Método dos Elementos Finitos foi utilizado para simular o comportamento carga x recalque das placas assentes sobre camadas de solo melhorado. O modelo Pseudo-Elástico Não Linear (Hiperbólico) foi empregado na análise numérica para modelar o comportamento dos novos materiais. Os resultados dos ensaios de placa sobre camadas de solo melhorado demonstraram que houve um aumento significativo da capacidade de suporte, além de uma redução considerável dos recalques, quando comparados ao comportamento carga x recalque do solo natural (Cudmani, 1994). A analise do comportamento de fundações superficiais assentes em solos estratificados, através de simulações numéricas, demonstrou ser eficiente para a previsão do comportamento carga x recalque das mesmas.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Neste trabalho foi estudado o comportamento de fundações superficiais apoiadas em sistema de dupla camada, quando a superior é cimentada. O estudo consistiu-se de três etapas, chamadas de Etapa de Laboratório, Etapa Numérica e Etapa de Campo. Na Etapa de Laboratório foi verificada a viabilidade técnica de utilizar os resíduos industriais cinza pesada e cal de carbureto na estabilização de um solo residual de arenito botucatu. Estudou-se a reatividade da cinza pesada com a cal de carbureto, a influência da temperatura e do tempo de cura no desenvolvimento das reações pozolânicas, a influência de diferentes teores de resíduos na resistência à compressão simples, compressão diametral e durabilidade, objetivando definir uma mistura ótima e, ainda, o impacto ambiental da utilização da mistura ótima, através de ensaios de lixiviação e solubilização. Na Etapa Numérica foi estudado, através do Método dos Elementos Finitos, o comportamento de fundações superficiais apoiadas em dupla camada. O modelo utilizado para representar o comportamento do material cimentado e não-cimentado foi o elástico-plástico com critério de ruptura de Drucker-Prager e fluxo não-associado. Verificou-se, através de análise paramétrica, a influência da espessura da camada cimentada e do diâmetro da fundação, bem como a influência dos parâmetros dos materiais cimentado e não-cimentado na resposta carga x recalque de fundações superficiais. Na Etapa de Campo foram construídos aterros experimentais utilizando a mistura ótima determinada na Etapa de Laboratório e, sobre estes aterros, foram executados provas de carga de placas. A análise dos resultados obtidos nas três etapas levou às seguintes conclusões: é possível utilizar cinza pesada e cal de carbureto para estabilizar o solo residual de botucatu; o comportamento de fundações superficiais sobre solos cimentados é controlado pela relação espessura da camada cimentada diâmetro da fundação; os parâmetros ângulo de atrito e módulo de elasticidade da camada cimentada não influenciam os resultados de prova de carga; a ruptura da fundação é função de dois mecanismos progressivos, os quais são função das tensões de tração geradas na parte inferior da camada cimentada e das tensões cisalhantes existentes logo abaixo das bordas da fundação.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The systemic financial crisis that started in 2008 in the United States had some severe effects in the economic activity and required the bailout of financial institutions with the use of taxpayer’s money. It also originated claims for stronger regulatory framework in order to avoid another threat in the financial market. The Dodd Frank Act was proposed and approved in the United States in the aftermath of the crisis and brought, among many other features, the creation of the Financial Stability Oversight Council and the tougher inspection of financial institutions with asset above 50 billion dollars. The objective of this work is to study the causal effect of the Dodd Frank Act on the behavior of the treatment group subject to monitoring by the Financial Stability Oversight Council (financial institutions with assets above 50 billion dollars) regarding capital and compensation structure in comparison to the group that was not treated. We use data from Compustat and our empirical strategy is the Regression Discontinuity Design, not usually applied to the banking literature, but very useful for the present work since it allows us to compare the treatment group and the non-treatment group in the year of the enactment of the law (2010). No change of behavior was observed for the Capital Structure. In the Compensation Schemes, however, a decrease was found in the item other compensation for CEOs and CFOs. We also performed a robustness check by running a placebo test on the variables in the year before the law was enacted. No significance was found, which supports the conclusion that our main results were caused by the enactment of the DFA.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this paper we developed a prototype for dynamic and quantitative analysis of the hardness of metal surfaces by penetration tests. It consists of a micro-indenter which is driven by a gear system driven by three-rectified. The sample to be tested is placed on a table that contains a load cell that measures the deformation in the sample during the penetration of micro-indenter. With this prototype it is possible to measure the elastic deformation of the material obtained by calculating the depth of penetration in the sample from the difference of turns between the start of load application to the application of the load test and return the indenter until the complete termination of load application. To determine the hardness was used to measure the depth of plastic deformation. We used 7 types of steel trade to test the apparatus. There was a dispersion of less than 10% for five measurements made on each sample and a good agreement with the values of firmness provided by the manufacturers.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objectives: To evaluate how to develop dynamic hyperinflation (DH) during exercise, the influence of pursed-lip breathing in (PLB) on breathing pattern and operating volume in patients with asthma. Methods: We studied 12 asthmatic patients in three moments: (1) anthropometry and spirometry, (2) submaximal incremental cycle ergometer test in spontaneous breathing and (3), submaximal incremental test on a cycle ergometer with PLB using the Opto-electronic plethysmography. Results: Evaluating the end-expiratory lung volume (EEV) during submaximal incremental test in spontaneous breathing, patients were divided into euvolume and hyperinflated. The RFL has increased significantly, the variation of the EEV group euvolume (1.4L) and decreased in group hyperinflated (0.272L). In group volume observed a significant increase of 140% in Vt at baseline, before exercise, comparing the RFL and spontaneous breathing. Hyperinflated group was observed that the RFL induced significant increases of Vt at all times of the test incremental baseline, 50%, 100% load and 66% recovery, 250%, 61.5% and 66% respectively. Respiratory rate decreased significantly with PLB at all times of the submaximal incremental test in the group euvolume. The speed of shortening of inspiratory muscles (VtRcp/Ti) in the hyperinflated increased from 1.6 ± 0.8L/s vs. 2.55 ± 0.9L/s, whereas in the RFL euvolume group ranged from 0.72 ± 0.31L/s vs. 0.65 ± 0.2L/s. The velocity of shortening of the expiratory muscles (VtAb/Te) showed similarity in response to RFL. In group hyperinflated varied vs. 0.89 ± 0.47 vs. 0.80 ± 0.36 and ± 1.17 ± 1L vs. 0.78 ± 0.6 for group euvolume. Conclusion: Different behavior in relation to EEV in patients with moderate asthma were observed, the HD and decreased EEV in response to exercise. The breathing pattern was modulated by both RFL performance as at home, making it more efficient

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Purpose: To evaluate the effects of the elapsed time (ET) after nonvital bleaching (NVB) and sodium ascorbate application (10%) (SAA) on the shear bond strength of dentin to ceramic.Materials and Methods: Bovine incisors were selected, internally bleached (35% carbamide peroxide) for 9 days and submitted to the following treatments (n = 10): G1, G2, G3-luting after 1, 7, and 14 days; G4, G5, and G6-luting after SAA, 1, 7, and 14 days, respectively. G7 and G8 were not bleached: G7-luting 24 hours after access cavity sealing; G8-luting 24 hours after access cavity sealing after SAA. After NVB, the vestibular dentin was exposed and flattened. The SAA was applied to the dentin (G4, G5, G6, G8) for 10 minutes, and it was then washed and dried. The dentin was etched (37% phosphoric acid), and an adhesive system (Single Bond 2) was applied. Feldspathic ceramic discs (VM7; 4-mm diameter, 3-mm thick) were luted with a dual-resin agent (RelyX ARC, 3M ESPE Dental Products, St. Paul, MN). After 24 hours, specimens were submitted to shear test on a universal testing machine. The data (MPa) were submitted to ANOVA and Dunnet's test (5%).Results: The means (+/- SD) obtained were (MPa): G1 (14 +/- 4.5), G2 (14.6 +/- 3.1), G3 (14 +/- 3.7), G4 (15.5 +/- 4.6), G5 (19.87 +/- 4.5), G6 (16.5 +/- 3.7), G7 (22.8 +/- 6.2), and G8 (18.9 +/- 5.4). SAA had a significant effect on bond strength (p = 0.0054). The effect of ET was not significant (p = 0.1519). G5 and G6 presented higher values than the other bleached groups (p < 0.05) and similar to G7 and G8 (p > 0.05).Conclusions: After NVB, adhesive luting to dentin is recommended after 7 days if sodium ascorbate has been applied prior to dentin hybridization.