Moment of creation : conception of Brasília and of the National Congress

Contém uma síntese de ideias sobre Brasília e o Congresso Nacional, com foco na Câmara dos Deputados. Tem por intenção explorar as relações entre a cidade e o edifício, de modo a discutir sobre como ambos estão estreitamente associados, a ponto de ser difícil imaginar um apartado do outro.

Sessile Drop in Microgravity: Creation, Contact Angle and Interface

We present in this paper the results obtained from a parabolic flight campaign regarding the contact angle and the drop interface behavior of sessile drops created under terrestrial gravity (1g) or in microgravity (mu g). This is a preliminary study before further investigations on sessile drops evaporation under microgravity. In this study, drops are created by the mean of a syringe pump by injection through the substrate. The created drops are recorded using a video camera to extract the drops contact angles. Three fluids have been used in this study : de-ionized water, HFE-7100 and FC-72 and two heating surfaces: aluminum and PTFE. The results obtained evidence the feasibility of sessile drop creation in microgravity even for low surface tension liquids (below 15 mN m (-aEuro parts per thousand 1)) such as FC-72 and HFE-7100. We also evidence the contact angle behavior depending of the drop diameter and the gravity level. A second objective of this study is to analyze the drop interface shape in microgravity. The goal of the these experiments is to obtain reference data on the sessile drop behavior in microgravity for future experiments to be performed in an French-Chinese scientific instrument (IMPACHT).

Creation of arbitrary coherent superposition states in four-level systems

Using the technique of stimulated Raman adiabatic passage, we propose schemes for creating arbi- trary coherent superposition states of atoms in four-level systems: a A-type system with twofold final states and a four-level ladder system. With the use of a control field, arbitrary coherent superposition states are created without the condition of multiphoton resonance. Suitable manipulation of detunings and the control field can create either a single state or any superposition states desired. (c) 2005 Pleiades Publishing, Inc.

Creation of temporary ponds for amphibians in northern and central Europe

More than 4000 ponds have been created or restored in Denmark since 1985 as part of a large-scale pond-digging programme to protect endangered amphibians in particular and pond flora and fauna in general. Most ponds are created on private land with public financing. The programme was triggered by, among other factors, a drastic decline in amphibian populations in Denmark between 1940 and 1980. However, in recent years there has been an increased awareness in Denmark that temporary ponds are important for the conservation of some of the most rare amphibian species, such as fire-bellied toad Bombina bombina, natterjack toad Bufo calamita and green toad Bufo viridis. Other rare species such as moor frog Rana arvalis and European tree frog Hyla arborea also benefit from temporary ponds. The last 15 years of work on the conservation of endangered species and their habitats has resulted in a last-minute rescue and a subsequent growth in the size of most Danish populations of fire-bellied toad and green toad; some populations of the relatively more common natterjack toad have also increased. The creation of temporary ponds plays an important role in the success of these three species. The creation of ponds to help restore viable populations of the most rare amphibians has not been easy. To study the conditions that may need to be created, Danish herpetologists searched for areas with temporary ponds that had good water quality, natural hydrological conditions and a management regime influenced by traditional agricultural methods. The paper gives an overview of pond creation and restoration projects in Denmark and Poland and their significance for amphibian diversity.

A photographic record of a pre- and post-lake creation event from World War II at Valley, Isle of Anglesey, UK

The article compares a recent aerial photograph of the lowlands of the Isle of Anglesey area with a German surveillance photograph from 1941. The authors aim to infer the environmental changes made to this sand dune and lake system as a direct consequence of constructing the airfield. Part of Tywyn Trewan, the extensive sand dune system, was completely destroyed in order to create runways and the technical and domestic accommodation to house a strategic airfield. As part of the dredging, six new water bodies with a combined surface area of approximately 6 ha were created.

SteelConverter and Caltech VirtualShaker: Rapid Nonlinear Cloud-Based Structural Model Conversion and Analysis

STEEL, the Caltech created nonlinear large displacement analysis software, is currently used by a large number of researchers at Caltech. However, due to its complexity, lack of visualization tools (such as pre- and post-processing capabilities) rapid creation and analysis of models using this software was difficult. SteelConverter was created as a means to facilitate model creation through the use of the industry standard finite element solver ETABS. This software allows users to create models in ETABS and intelligently convert model information such as geometry, loading, releases, fixity, etc., into a format that STEEL understands. Models that would take several days to create and verify now take several hours or less. The productivity of the researcher as well as the level of confidence in the model being analyzed is greatly increased.

It has always been a major goal of Caltech to spread the knowledge created here to other universities. However, due to the complexity of STEEL it was difficult for researchers or engineers from other universities to conduct analyses. While SteelConverter did help researchers at Caltech improve their research, sending SteelConverter and its documentation to other universities was less than ideal. Issues of version control, individual computer requirements, and the difficulty of releasing updates made a more centralized solution preferred. This is where the idea for Caltech VirtualShaker was born. Through the creation of a centralized website where users could log in, submit, analyze, and process models in the cloud, all of the major concerns associated with the utilization of SteelConverter were eliminated. Caltech VirtualShaker allows users to create profiles where defaults associated with their most commonly run models are saved, and allows them to submit multiple jobs to an online virtual server to be analyzed and post-processed. The creation of this website not only allowed for more rapid distribution of this tool, but also created a means for engineers and researchers with no access to powerful computer clusters to run computationally intensive analyses without the excessive cost of building and maintaining a computer cluster.

In order to increase confidence in the use of STEEL as an analysis system, as well as verify the conversion tools, a series of comparisons were done between STEEL and ETABS. Six models of increasing complexity, ranging from a cantilever column to a twenty-story moment frame, were analyzed to determine the ability of STEEL to accurately calculate basic model properties such as elastic stiffness and damping through a free vibration analysis as well as more complex structural properties such as overall structural capacity through a pushover analysis. These analyses showed a very strong agreement between the two softwares on every aspect of each analysis. However, these analyses also showed the ability of the STEEL analysis algorithm to converge at significantly larger drifts than ETABS when using the more computationally expensive and structurally realistic fiber hinges. Following the ETABS analysis, it was decided to repeat the comparisons in a software more capable of conducting highly nonlinear analysis, called Perform. These analyses again showed a very strong agreement between the two softwares in every aspect of each analysis through instability. However, due to some limitations in Perform, free vibration analyses for the three story one bay chevron brace frame, two bay chevron brace frame, and twenty story moment frame could not be conducted. With the current trend towards ultimate capacity analysis, the ability to use fiber based models allows engineers to gain a better understanding of a building’s behavior under these extreme load scenarios.

Following this, a final study was done on Hall’s U20 structure [1] where the structure was analyzed in all three softwares and their results compared. The pushover curves from each software were compared and the differences caused by variations in software implementation explained. From this, conclusions can be drawn on the effectiveness of each analysis tool when attempting to analyze structures through the point of geometric instability. The analyses show that while ETABS was capable of accurately determining the elastic stiffness of the model, following the onset of inelastic behavior the analysis tool failed to converge. However, for the small number of time steps the ETABS analysis was converging, its results exactly matched those of STEEL, leading to the conclusion that ETABS is not an appropriate analysis package for analyzing a structure through the point of collapse when using fiber elements throughout the model. The analyses also showed that while Perform was capable of calculating the response of the structure accurately, restrictions in the material model resulted in a pushover curve that did not match that of STEEL exactly, particularly post collapse. However, such problems could be alleviated by choosing a more simplistic material model.

The labour market in the Basque Country: University Employment Centers

This project is a study of the Labour Market in the Basque Country. First of all, we have analysed the position of the Basque Country in the European Union employment situation by gender and age. Secondly, we have studied the educational level of the Basque Country from the European Union perspective. Thirdly, we have showed the importance of labour orientation in educational level, especially in higher education. Finally, the design of new employment policies to promote the creation of jobs and stability of the labour market depends on: new industries and university employment policies.

River Wyre salmon and sea trout spawning habitat restoration / creation project. Final report April 1995

Adult salmon and sea trout rod catches in the River Wyre have been subject to considerable variability over the years. Annual rod catches ranging from 6 to 401 have been reported since records began in 1905. It has long been suspected that the physical nature of the catchment, combined with anthropogenic influences, has resulted in a deleterious effect on the Wyre fishery. Acidification problems in the head water streams (Marshaw Wyre and Tarnbrook Wyre) have been reported and are thought to threaten salmon juvenile survival. The construction of Abbeystead Reservoir and an increased tendency towards rapidly rising water levels during storms (flashiness) 1 are thought to have a significant impact on spawning gravel quality and quantity, both of which are thought to be deteriorating. As part of an overall desire to maintain and improve the migratory salmonid population in the River Wyre, this project has been commissioned to investigate remedial action which may improve and enhance spawning success, leading to an eventual improvement in the status of adult stocks. The primary objective is to establish whether the quantity and/or quality of available spawning gravels are limiting migratory salmonid productivity. The investigations undertaken confirm the general observation that useable spawning gravels appear to be in short supply in the River Wyre, and may be the limiting factor influencing returning adult stock.

River Wyre salmon and sea trout spawning habitat restoration / creation project. Gravel enhancement schemes.

As part of an overall desire to maintain and improve the migratory salmonid population in the River Wyre, a project was commissioned to investigate remedial action which may improve and enhance spawning success and lead to an eventual improvement in the status of adult stocks. The report, titled "River Wyre Salmon and Sea Trout Spawning Habitat Restoration/Creation Project", concluded that usable spawning gravels appeared to be in short supply in the River Wyre catchment and may be the limiting factor influencing the returning adult stock, as juvenile nursery habitat was not found to be limiting. This report looks at gravel enhancement schemes to improve River Wyre salmon and sea trout spawning habitat restoration. It examines methods for gravel enhancement schemes: mechanical cleaning and construction of gravel addition structures. Includes sites figures of sites identified for enhancement.

Ecoturismo e Inserção Comunitária em Unidades de Conservação: Uma análise comparativa entre as comunidades tradicionais do Núcleo Picinguaba do Parque Estadual da Serra do Mar (PESM) Ubatuba, SP

O desenvolvimento do ecoturismo em Unidades de Conservação tem sido considerado uma alternativa para a diminuição dos impactos sobre a biodiversidade, a potencialização da conservação da natureza e a oportunidade de inclusão das populações locais. Nesse sentido, a presente dissertação teve como objetivo geral analisar comparativamente o desenvolvimento das atividades turísticas em três comunidades tradicionais do Núcleo Picinguaba do Parque Estadual da Serra do Mar, localizado no município de Ubatuba (SP), buscando compreender de que forma as populações tradicionais de cada comunidade estão inseridas nessas atividades e qual das três encontra-se mais articulada para o desenvolvimento do ecoturismo. Para obter parâmetros de comparação das comunidades estudadas, foram criados Indicadores de Avaliação do Desenvolvimento do (Eco)turismo, definidos de acordo com algumas premissas básicas de desenvolvimento do ecoturismo e avaliados a partir de entrevistas semiestruturadas com atores locais e observações de campo. Concluiu-se que a comunidade mais bem estruturada para o desenvolvimento do ecoturismo é o Quilombo da Fazenda, apesar de grande parte dos moradores entrevistados não serem contemplados com os benefícios da atividade. A atuação do Parque é mais restrita aos trabalhos realizados pelos monitores ambientais, que atuam principalmente na Praia da Fazenda e Sertão da Fazenda. Dessa forma, é necessário haver medidas voltadas para a melhoria das condições de vida das populações tradicionais do NP, afetadas pela criação da unidade de conservação, que alterou profundamente seu modo de vida, através da proibição de suas atividades. O desenvolvimento do ecoturismo no NP deve ser capaz de gerar empregos e renda para a população local de forma mais abrangente, promovendo o desenvolvimento sustentável e a valorização da cultura local.