Estudo de inibidores de corrosão em concreto armado, visando a melhoria na sua durabilidade

This thesis has as objective presents a methodology to evaluate the behavior of the corrosion inhibitors sodium nitrite, sodium dichromate and sodium molybdate, as well as your mixture, the corrosion process for the built-in steel in the reinforced concrete, through different techniques electrochemical, as well as the mechanical properties of that concrete non conventional. The addition of the inhibitors was studied in the concrete in the proportions from 0.5 to 3.5 % regarding the cement mass, isolated or in the mixture, with concrete mixture proportions of 1.0:1.5:2.5 (cement, fine aggregate and coarse aggregate), superplasticizers 2.0 % and 0.40 water/cement ratio. In the modified concrete resistance rehearsals they were accomplished to the compression, consistence and the absorption of water, while to analyze the built-in steel in the concrete the rehearsals of polarization curves they were made. They were also execute, rehearsals of corrosion potential and polarization resistance with intention of diagnose the beginning of the corrosion of the armors inserted in body-of-proof submitted to an accelerated exhibition in immersion cycle and drying to the air. It was concluded, that among the studied inhibitors sodium nitrite , in the proportion of 2.0 % in relation to the mass of the cement, presented the best capacity of protection of the steel through all the studied techniques and that the methodology and the monitoring techniques used in this work, they were shown appropriate to evaluate the behavior and the efficiency of the inhibitors

Avaliação da atividade dos inibidores de tripsina após digestão enzimática em grãos de soja tratados termicamente

Este trabalho avalia a reativação dos inibidores de tripsina, após proteólise in vitro, de grãos de soja tratados termicamente. Para a inativação térmica dos inibidores, os grãos foram embebidos em água destilada (1:5 p/v) durante 12 horas e aquecidos em placas sob refluxo por 30 minutos. A reativação dos inibidores foi avaliada em comparação com a atividade das amostras cruas e aquecidas. A digestibilidade in vitro das proteínas variou de 47% ('OC-13') a 59% (Paraná), apresentando uma melhora, em média, de 32,6% com o aquecimento. A atividade dos inibidores de tripsina para os grãos crus variou de 122 a 206 UTI/mg de amostra, e os valores correlacionaram-se negativamente com a porcentagem de digestibilidade (r = -0,9177). Os inibidores tiveram suas atividades totalmente inativadas com o aquecimento dos grãos, os quais apresentaram porcentagem de recuperação, em média, de 40%. Com o aquecimento, a inativação dos inibidores provavelmente ocorre por complexação com os componentes do grão, o que leva à recuperação da atividade com o processo de digestão enzimática.

Fatores inibidores do uso de técnicas ambientais nos postos de combustíveis: um estudo de caso em Natal/RN

The objective of this work was to investigate the factors that inhibit the use of Environmental Techniques in the Gas Station of the city of Natal/RN. For this, a survey with the aid of a questionnaire was used like research instrument. It s used a sample for convenience, not probabilistic. For collection of the data, it was used directly application of the questionnaire to the Managers or Assistant managers of the gas station, in accordance with its availability or presence. The data was collected in all the regions of Natal (North, South, East and West). The population in accordance with the data of the ANP of September 2005 is of 111 ranks and the collected sample was of 86. To carry through the analysis of the data of this research had been used softwares Excel and Statistic version 5.0, for Windows. The analysis of data is divided in two parts; descriptive analysis and analysis of groupings (clusters). The results showed that bigger part of the interviewed ones has between 30 and 39 years of age; they have second grade completed; they had declared to have little between and reasonable knowledge how much to the use of Clean Technology (CT) in gas station; and a small part of the interviewed ones had informed to have much knowledge how much the resolutions of the CONAMA established for the Gas Station. Of the searched ranks, the majority is national(76.7%); the most accurate practice environmental used in the gas station are: it collects selective of oil used or contaminated and ecological tanks - coated with strengthened fibre glass; great part of the interviewed ones (33.8%) informed that never the TL makes planning of referring future action; about of the half of the interviewed ones (84.9%) they had more declared that its employees have of none to a reasonable level of training for deal with problems that compromise the environment; the majority of the ranks (72.1%) functions has for more then six years. It is observed that almost all the interviewed ones (96.5%) evaluate as being important or very important the implantation of CT in Gas Station and the great majority (82.1%) evaluates the difficulty in if implanting these technologies in Gas Station as being easy or very easy. In the analysis of cluster, it was verified existence of two groupings (as much in the variable of the barriers and benefits), being that inside of each clusters exists homogeneity and between clusters exists heterogeneity. In reality, everything is important or very important in the opinion of the interviewed ones. There only exists a small significant difference that separates them in clusters

Respostas de plantas de Eleusine indica sob diferentes condições hídricas a herbicidas inibidores da ACCase

Objetivou-se neste estudo avaliar a eficiência de controle de herbicidas inibidores da ACCase aplicados em pós-emergência em plantas de Eleusine indica submetidas a diferentes teores de água no solo. Os experimentos foram conduzidos em casa de vegetação, com a aplicação de três diferentes herbicidas (fluazifop-p-butil, haloxyfop-methyl e sethoxydim + óleo mineral Assist); o delineamento experimental utilizado para cada herbicida foi inteiramente casualizado, com quatro repetições, constituído de um fatorial 3 x 4, sendo a combinação de três manejos hídricos (-0,03, -0,07 e -1,5 MPa) e quatro doses desses produtos (100, 50, 25 e 0% da dose recomendada). Os parâmetros fisiológicos avaliados foram: taxa fotossintética, condutância estomática, transpiração, temperatura da folha e matéria seca das plantas. As avaliações visuais de fitotoxicidade foram realizadas aos 14 dias após a aplicação. Os manejos hídricos aplicados não influenciaram o controle das plantas nos tratamentos testados, com exceção do herbicida sethoxydim, que teve sua eficiência hídrica prejudicada quando da deficiência hídrica nas aplicações das doses fracionadas. A taxa fotossintética, a transpiração e a condutância estomática foram maiores em plantas submetidas ao manejo hídrico de 13%, as quais apresentaram as menores temperaturas foliares em relação à temperatura ambiente.

Seleção de genótipos de cana-de-açúcar para acúmulo de protoporfirina ix com uso de herbicidas inibidores da protox

O objetivo do presente trabalho foi selecionar genótipos de cana-de-açúcar por meio de inibidores da PROTOX e antioxidantes para indução do acúmulo de protoporfirina IX (PROTO IX) e/ou de seus precursores em plantas. Esses compostos podem ser utilizados como agentes sensibilizantes em terapia fotodinâmica (TFD), os quais possibilitam uma fonte de baixo custo para o tratamento de neoplasias e carcinomas. O experimento foi montado em câmara climatizada, com aplicação de nove tratamentos (1. oxyfluorfen + glutamato monossódico + vitaminas C e E; 2. oxyfluorfen + glutamato monossódico + vitaminas C e E + ácido levulênico; 3. oxyfluorfen; 4. carfentrazone + glutamato monossódico + vitaminas C e E; 5. carfentrazone + glutamato monossódico + vitaminas C e E + ácido levulênico; 6. carfentrazone; 7. testemunha + vitaminas C e E; 8. testemunha + vitaminas C e E + ácido levulênico; e 9. testemunha) em oito genótipos de cana-de-açúcar (PO933499, RB806043, RB470355, PO830698, SP701143, PO901387, PO894414 e SP903414), dispostos em esquema fatorial 9 x 8, com quatro repetições. As repetições constituíram-se de folhas (20 cm) destacadas de cada genótipo, sendo estas pulverizadas com os tratamentos mencionados, em simulador estacionário. Foram realizadas avaliações visuais de controle aos 2 DAA (dias após aplicação) e, no fim do estudo, determinações analíticas via extração da biomassa fresca, verificando os teores de protoporfirina IX por cromatografia líquida de alta eficiência. Os resultados mostraram que em curto prazo foram detectados aumentos significativos nas concentrações de PROTO IX para os genótipos RB470355 e SP903414 submetidos ao tratamento 2 e para o genótipo SP701143 submetido ao tratamento 8, indicando que eles podem ser utilizados como fontes acumuladoras de protoporfirina IX.

Reavaliação da eficiência de óleo de coco saponificado e de sua microemulsão como inibidores de corrosão em uma célula eletroquímica

An interesting development in surfactants science and technology is their application as corrosion inhibitors, since they act as protective films over anodic and cathodic surfaces. This work aims to investigate the efficiency of saponified coconut oil (SCO) as corrosion inhibitor and of microemulsified system (SCO + butanol + kerosene oil + distilled water), in saline medium, using an adapted instrumented cell, via techniques involving linear polarization resistance (LPR) and mass loss coupons (MLC). For this, curves of efficiency versus SCO concentration (ranging between 0 and 75 ppm) have been constructed. According to the obtained results, the following efficiency levels were reached with OCS: 98% at a 75 ppm concentration via the LPR method and 95% at 75 ppm via the MLC method. The microemulsified system, for a concentration of 15 ppm of SCO, obtained maximum inhibition of 97% (LPR) and 93% (MLC). These data indicate that it is possible to optimize the use of SCO in similar applications. Previous works have demonstrated that maximal efficiencies below 90% are attained, typically 65% as free molecules and 77% in microemulsified medium, via the LPR method in a different type of cell. Therefore, it can be concluded that the adapted instrumented cell (in those used methods) showed to be an important tool in this kind of study and the SCO was shown effective in the inhibition of the metal

Avaliação do comportamento de argila ativada na presença de água destilada, soluções salinas e inibidores de hidratação catiônicos

The clay swelling is today one of the major problems during the well drilling. Nearly 50% of clays that constitute shale expand easily in the presence of water molecules. During the drilling of a geological formation containing swelling clays, when is feasible the use of water base fluids, it is necessary to apply clay inhibitors. This avoids the incorporation of the cutting to the drilling fluid which is responsible for the wall swelling and crumbling. The aim of this work was to evaluate the synergistic behavior that occurs when swelling clay inhibitors are associated to NaCl and KCl salts. Three swelling clay inhibitors samples, INIB A, INIB B and INIB C, were analyzed. Each inhibitor was characterized by the amount of chlorides and active matter content. For the water-clay interaction evaluation in the presence of various fluids, it was used the Capillary Suction Timer (CST, Fann) and Linear Swell Meter (LSM 2000, Fann). For better interpretation of results, a Design of Experiments (DOE, Umetrics MODDE 7.0 TM) through Result Surface Methodology (RSM) was employed, taking into account the type, the swelling inhibitors concentration and the contact time with the clay. The results showed different efficiencies among the inhibitors employed, and the salt-inhibitors mixtures were more efficient than those products alone. However, for field operation, other parameters should be taking into account, as operational cost, environmental requests and time of application for each product

Caracterização e aplicação de sistemas micelares e microemulsionados como inibidores de corrosão

Corrosion is an important phenomenon that frequently occurs in the oil industry, causing surface ablation, such as it happens on the internal surfaces of oil pipes. This work aims to obtain new systems to reduce this specific problem. The surfactants SDS, CTAB, and UNITOL L90 (in micellar and microemulsionated systems) were used as corrosion inhibitors. The systems were obtained using a C/S ratio of 2, butanol as cosorfactant, kerosene as oil phase and, as water phase, NaCl solutions of 0.5M with pH = 2, 4, and 7. Microemulsion regions were found both for direct and inverse micelles. SDS had the higher microemulsion region and the area was not dependent of pH. The study of micellization of these surfactans in the liquid-gas interface was carried out via the determination of CMC from surface tension measurements. Regarding microemulsionated systems, in the case of CTAB, CMC increased when pH was increased, being constant for SDS and UNITOL L90. Concerning micellar systems, increase in pH caused decrease and increase in CMC for SDC and CTAB, respectively. In the case of UNITOL L90, CMC was practically constant, but increased for pH = 4. The microemulsionated systems presented higher CMC values, except for UNITOL L90 L90. The negative values of free energy of micellization indicated that the process of adsorption was spontaneous. The results also indicated that, comparing microemulsionated to systems, adsorption was less spontaneous in the case of SDS and CTAB, while it did not change for UNITOL L90. SAXS experiments indicated that micelle geometry was spherical, existing also as halter and flat micelles, resuting in a better inght on the adsorption at the liquid-solid interface. Efficiency of corrosion inhibition as determined by electrochemical measurements, from corrosion currents calculated from Tafel extrapolation indicuting heat showed surfactants to be efficient even at low concentrations. Equilibrium isotherm data were fitted to the Freundlich model, indicating that surfactant adsorption occurs in the form of multilayers

Obtenção de novos sistemas nanoautoemulsificantes a partir do óleo das sementes de Azadirachta indica A Juss e suas aplicações como inibidores de corrosão

Corrosion is a natural process that causes progressive deterioration of materials, so, reducing the corrosive effects is a major objective of development of scientific studies. In this work, the efficiency of corrosion inhibition on a AISI 1018 carbon steel of the nanoemulsion system containing the oil of the seeds of Azadirachta indica A. Juss (SNEOAI) was evaluated by the techniques of linear polarization resistance (LPR) and weight loss (CPM), a instrumented cell. For that, hydroalcoholic extract of leaves of A. indica (EAI) was solubilized in a nanoemulsion system (SNEOAI) of which O/W system (rich in aqueous phase). This nanoemulsion system (tested in different concentrations) was obtained with oil from the seeds of this plant species (OAI) (oil phase), dodecylammonium chloride (DDAC) (surfactant), butanol (cosurfactant) and water, using 30 % of C/T (cosurfactant/surfactant), 0.5 % of oil phase and 69.5 % of aqueous phase, and characterized by surface tension, rheology and droplet sizes. This systems SNEOAI and SNEOAI-EAI (nanoemulsion containing hydroalcoholic extract - EAI) showed inhibition efficiencies in corrosive environment in saline (1 %), for the method of LPR with significant value of 70.58 % (300 ppm) to SNEOAI, 74.17 % (100 ppm) and 72.51 % (150 ppm) to SNEOAI-EAI. The best efficiencies inhibitions were observed for the method of CPM with 85.41 % for the SNEOAI (300 ppm) and 83.19 % SNEOAI-EAI (500 ppm). The results show that this formulation could be used commercially for use as a corrosion inhibitor, this research contributed to the biotechnological applicability of Azadirachta indica, considering the large use of this plant species rich in limonoids (tetranortriterpenoids), especially azadirachtin

Aplicação de sabões de ácidos graxos epoxidados como inibidores de corrosão em oleoduto

Corrosion usually occurs in pipelines, so that it is necessary to develop new surface treatments to control it. Surfactants have played an outstanding role in this field due to its capacity of adsorbing on metal surfaces, resulting in interfaces with structures that protect the metal at low surfactant concentrations. The appearance of new surfactants is a contribution to the area, as they increase the possibility of corrosion control at specific conditions that a particular oil field presents. The aim of this work is to synthesize the surfactants sodium 12 hydroxyocadecenoate (SAR), sodium 9,10-epoxy-12 hydroxyocadecanoate (SEAR), and sodium 9,10:12,13-diepoxy-octadecanoate (SEAL) and apply them as corrosion inhibitors, studying their action in environments with different salinities and at different temperatures. The conditions used in this work were chosen in order to reproduce oil field reality. The study of the micellization of these surfactants in the liquid-gas interface was carried out using surface tensiometry. It was observed that cmc increased as salt concentration was increased, and temperature and pH were decreased, while cmc decreased with the addition of two epoxy groups in the molecule. Using the values of cmc and the Gibbs equation, the values of Gibbs free energy of adsorption, area per adsorbed molecule, and surface excess were calculated. The surface excess increases as salt concentration and temperature decreases, increasing as pH is increased. The area per adsorbed molecule and the free energy of adsorption decrease with salt concentration, temperature, and pH increase. SAXS results showed that the addition of epoxy group in surfactant structure results in a decrease in the repulsion between the micelles, favoring the formation of more oblong micellar structures, ensuring a better efficiency of metal coverage. The increase in salt and surfactant concentrations provides an increase in micellar diameter. It was shown that the increase in temperature does not influence micellar structure, indicating thermal stability that is advantageous for use as corrosion inhibitor. The results of inhibition efficiency for the surfactants SEAR and SEAL were considered the best ones. Above cmc, adsorption occurred by the migration of micelles from the bulk of the solution to the metal surface, while at concentrations below cmc film formation must be due to the adsorption of semi-micellar and monomeric structures, certainly due to the presence of the epoxy group, which allows side interactions of the molecule with the metal surface. The metal resistance to corrosion presented values of 90% of efficiency. The application of Langmuir and Frumkin isotherms showed that the later gives a better description of adsorption because the model takes into account side interactions from the adsorbing molecules. Wettability results showed that micelle formation on the solid surface occurs at concentrations in the magnitude of 10-3 M, which isthe value found in the cmc study. This value also justifies the maximum efficiencies obtained for the measurements of corrosion resistance at this concentration. The values of contact angle as a function of time suggest that adsorption increases with time, due to the formation of micellar structures on metal surface

Inibidores de síntese de giberelinas e crescimento de mudas de mangueira 'Tommy Atkins'

A mangicultura no semiárido brasileiro destaca-se pelos altos rendimentos, pela qualidade do fruto produzido e pela possibilidade de produção durante todo o ano, devido a condições climáticas e tecnologias para o manejo do crescimento vegetativo e da floração, com uso da irrigação, podas e retardantes vegetais. O paclobutrazol aplicado ao solo é utilizado no manejo da produção da mangueira na maioria dos pomares. Entretanto, há a necessidade de identificar retardantes vegetais que possam ser aplicados via foliar, de forma a minimizar os resíduos no solo e evitar o uso de quantidades inadequadas ao longo dos anos. Assim, este trabalho teve como objetivo avaliar retardantes vegetais aplicados via foliar na inibição do crescimento vegetativo de mudas de mangueira 'Tommy Atkins'. Prohexadione-Ca, etil-trinexapac e cloreto de chlormequat, aplicados via foliar, na dose de 1g i.a. planta-1, regulam o crescimento de ramos vegetativos, mas apresentam tempo diferenciado de atividade nas mudas, sendo 20 dias para prohexadione-Ca, 30 dias para cloreto de chlormequat e 45 dias para etil-trinexapac, nas condições em que o experimento foi conduzido.

Crystallographic and pre-steady-state kinetics studies on binding of NADH to wild-type and isoniazid-resistant enoyl-ACP(CoA) reductase enzymes from Mycobacterium tuberculosis

An understanding of isoniazid (INH) drug resistance mechanism in Mycobacterium tuberculosis should provide significant insight for the development of newer anti-tubercular agents able to control INH-resistant tuberculosis (TB). The inhA-encoded 2-trans enoyl-acyl carrier protein reductase enzyme (InhA) has been shown through biochemical and genetic studies to be the primary target for INH. In agreement with these results, mutations in the inhA structural gene have been found in INH-resistant clinical isolates of M. tuberculosis, the causative agent of TB. In addition, the InhA mutants were shown to have higher dissociation constant values for NADH and lower values for the apparent first-order rate constant for INH inactivation as compared to wild-type InhA. Here, in trying to identify structural changes between wild-type and INH-resistant InhA enzymes, we have solved the crystal structures of wild-type and of S94A, I47T and I21V InhA proteins in complex with NADH to resolutions of, respectively, 2.3 angstrom, 2.2 angstrom, 2.0 angstrom, and 1.9 angstrom. The more prominent structural differences are located in, and appear to indirectly affect, the dinucleotide binding loop structure. Moreover, studies on pre-steady-state kinetics of NADH binding have been carried out. The results showed that the limiting rate constant values for NADH dissociation from the InhA-NADH binary complexes (k(off)) were eleven, five, and tenfold higher for, respectively, I21V, I47T and S94A INH-resistant mutants of InhA as compared to INH-sensitive wildtype InhA. Accordingly, these results are proposed to be able to account for the reduction in affinity for NADH for the INH-resistant InhA enzymes. (c) 2006 Elsevier Ltd. All rights reserved.

Crystallographic studies on the binding of isonicotinyl-NAD adduct to wild-type and isoniazid resistant 2-trans-enoyl-ACP (CoA) reductase from Mycobacterium tuberculosis

The resumption of tuberculosis led to an increased need to understand the molecular mechanisms of drug action and drug resistance, which should provide significant insight into the development of newer compounds. Isoniazid (INH), the most prescribed drug to treat TB, inhibits an NADH-dependent enoyl-acyl carrier protein reductase (InhA) that provides precursors of mycolic acids, which are components of the mycobacterial cell wall. InhA is the major target of the mode of action of isoniazid. INH is a pro-drug that needs activation to form the inhibitory INH-NAD adduct. Missense mutations in the inhA structural gene have been identified in clinical isolates of Mycobacterium tuberculosis resistant to INH. To understand the mechanism of resistance to INH, we have solved the structure of two InhA mutants (121V and S94A), identified in INH-resistant clinical isolates, and compare them to INH-sensitive WT InhA structure in complex with the INH-NAD adduct. We also solved the structure of unliganded INH-resistant S94A protein, which is the first report on apo form of InhA. The salient features of these structures are discussed and should provide structural information to improve our understanding of the mechanism of action of, and resistance to, INH in M. tuberculosis. The unliganded structure of InhA allows identification of conformational changes upon ligand binding and should help structure-based drug design of more potent antimycobacterial agents. (c) 2007 Elsevier B.V. All rights reserved.

Partial genetic characterization of Stearoyl Coa-Desaturase's structural region in Bubalus bubalis

Conjugated Linoleic Acids (CLAs) comprise a family of positional and geometric isomers of linoleic acid. The main form of CLA, cis-9, trans-11-C18:2 show positive effects in cancer prevention and treatment. The major dietary sources of these fatty acids are derived from ruminant animals, in particular dairy products. In these animals, the endogenous synthesis mainly occurs in mammary gland by the action of enzyme Stearoyl CoA Desaturase (SCD). Different levels of expression and activity of SCD in mammary gland can explain partially the variation of CLA levels in fat milk. Considering a great fat concentration in bubaline milk and the benefit of a high and positive correlation between fat milk and CLA production, this study was carried on with the intention of sequencing and characterizing part of the gene that codifies SCD in buffaloes. Genomic DNA was extracted from blood samples of lactating bubaline which begins to the breed Murrah. After the (acho que nao precisa desse the) extractions, PCR (Polymerase Chain Reaction) reactions were made by using primers Z (sic) (sic) D1 and E1 (sic) (sic) F1. The fragments obtained in PCR were cloned into T vectors and transformed in competent cells DH10B line. After this, three samples of each fragment were sequenced from 5' and 3' extremities using a BigDye kit in an automatic sequencer. Sequences were edited in a consensus of each fragment and were submitted to BLAST-n / NCBI for similarity comparisions among other species. The sequence obtained with Z (sic) (sic) D1 primers shows 938 bp enclosing exons 1 and 2 and intron 1. The primers E1 (sic) (sic) F1 show 70 bp corresponding to exon 3 of bubaline SCD gene. Similarities were obtained between 85% and 97% among bubaline sequences and sequences of SCD gene described in human, mouse, rat, swine, bovine, caprine and ovine species. This study has permitted the identification and partial characterization of SCD codifing region in Bubalus bubalis specie.

Use of PCR-RFLP (Polymerase Chain Reaction-Restricted Fragment Length Polymorphism) in the gene of the enzyme Stearoyl-CoA-Desaturase in Bubalus bubalis

The milk is an important food because it contents Conjugated Linoleic Acids (CIA). These fatty acids are synthesized in mammary gland under action of the enzyme Stearoyl CoA-Desaturase (SCD) and have showed some positive effects in human disease prevention and treatments. A variation of CLA in milk fat exists and can be partially explained by the different levels of expression of SCD. The aim was to study part of the encoding regions of SCD's gene using PCR-RFLP (Polymerase Chain Reaction-Restriction Fragment Length Polymorphism). Genomic DNA was extracted from lactating Murrah females. After this, PCR reactions were made by using primers Z (sic) (sic) D1 that encloses exon I, II and intron I. The fragments amplified are composed by 938 pb. Then, RFLP techniques were applied in the fragments using the restriction enzymes Pst I and Sma I. The enzyme Pst I has generated fragments of 788pb and 150bp and the Sma I has generated fragments of 693pb and 245pb. All the animals showed the same migration standard for both enzymes, characterizing a genetic monomorphism for this region of SCD gene. The analysis determined that there aren't genetic differences between these animals in the studied regions by using Pst I and Sma I enzymes.