936 resultados para Industrial Development
Resumo:
El principal objetivo de la presente tesis es el de desarrollar y probar un código capaz de resolver las ecuaciones de Maxwell en el dominio del tiempo con Malla Refinada Adaptativa (AMR por sus siglas en inglés). AMR es una técnica de cálculo basada en dividir el dominio físico del problema en distintas mallas rectangulares paralelas a las direcciones cartesianas. Cada una de las mallas tendrá distinta resolución y aquellas con mayor resolución se sitúan allí dónde las ondas electromagnéticas se propagan o interaccionan con los materiales, es decir, dónde mayor precisión es requerida. Como las ondas van desplazándose por todo el dominio, las mayas deberán seguirlas. El principal problema al utilizar esta metodología se puede encontrar en las fronteras internas, dónde las distintas mallas se unen. Ya que el método más corrientemente utilizado para resolver las ecuaciones de Maxwell es el de las diferencias finitas en el dominio del tiempo (FDTD por sus siglas en inglés) , el trabajo comenzó tratando de adaptar AMR a FDTD. Tras descubrirse que esta interacción resultaba en problemas de inestabilidades en las fronteras internas antes citadas, se decidió cambiar a un método basado en volúmenes finitos en el dominio del tiempo (FVTD por sus siglas en inglés). Este se basa en considerar la forma en ecuaciones de conservación de las ecuaciones de Maxwell y aplicar a su resolución un esquema de Godunov. Se ha probado que es clave para el correcto funcionamiento del código la elección de un limitador de flujo que proteja los extremos de la onda de la disipación típica de los métodos de este tipo. Otro problema clásico a la hora de resolver las ecuaciones de Maxwell es el de tratar con las condiciones de frontera física cuando se simulan dominios no acotados, es decir, dónde las ondas deben salir del sistema sin producir ninguna reflexión. Normalmente la solución es la de disponer una banda absorbente en las fronteras físicas. En AMREM se ha desarrollado un nuevo método basado en los campos característicos que con menor requisito de CPU funcina suficientemente bien incluso en los casos más desfaborables. El código ha sido contrastado con soluciones analíticas de diferentes problemas y también su velocidad ha sido comparada con la de Meep, uno de los programas más conocidos del ámbito. También algunas aplicaciones han sido simuladas con el fin de demostrar el amplio espectro de campos en los que AMREM puede funcionar como una útil herramienta.
Resumo:
El objetivo de esta tesis es el desarrollo y caracterización de biosensores ópticos sin marcado basados en celdas sensoras biofotónicas (BICELLs). Éstas son un nuevo concepto de biosensor desarrollado por el grupo de investigación y consiste en la combinación de técnicas de interrogación vertical, junto a estructuras fotónicas producidas usando métodos de micro- y nanofabricación. Varias conclusiones son extraídas de este trabajo. La primera, que se ha definido una BICELL estándar basada en interferómetros Fabry-Perot (FP). Se ha demostrado su capacidad para la comparación de rendimiento entre BICELLs estructuradas y para la realización de inmunoensayos de bajo coste. Se han estudiado diferentes técnicas de fabricación disponibles para la producción de BICELLs. Se determinó que la litografía de contacto a nivel de oblea produce estructuras de bajo coste, reproducibles y de alta calidad. La resolución alcanzada ha sido de 700 nm. El estudio de la respuesta a inmunoensayos de las BICELLs producidas se ha desarrollado en este trabajo. Se estudió la influencia de BICELLs basadas en diferentes geometrías y tamaños. De aquí resulta un nuevo enfoque para predecir el comportamiento de respuesta para la detección biológica de cualquier biosensor óptico estructurado, relacionando su superficie efectiva y su sensibilidad óptica. También se demostró una técnica novedosa y de bajo coste para la caracterización experimental de la sensibilidad óptica, basada en el depósito de películas ultradelgadas. Finalmente, se ha demostrado el uso de BICELLs desarrolladas en esta tesis, en la detección de aplicaciones reales, tales como hormonas, virus y proteínas. ABSTRACT The objective of this thesis is the development and characterization of optical label-free biosensors based on Bio-Photonic sensing Cells (BICELLs). BICELL is a novel biosensor concept developed by the research group, and it consists of a combination of vertical interrogation optical techniques and photonic structures produced by using micro- and nano-fabrication methods. Several main conclusions are extracted from this work. Firstly, a standard BICELL is defined based on FP interferometers, which demonstrated its capacity for accomplishing performance comparisons among different structured BICELLs, as well as to achieve low-cost immunoassays. Different available fabrication techniques were studied for BICELL manufacturing. It is found that contact lithography at wafer scale produce cost-effective, reproducible and high quality structures. The resolution achieved was 700 nm. Study on the response of developed BICELLs to immunoassays is performed within this work. It is therefore studied the influence of BICELLs based on different geometries and sizes in the immunoassay, which resulted in a new approach to predict the biosensing behaviour of any structured optical biosensor relating to its effective surface and optical sensitivity. Also, it is demonstrated a novel and low-cost characterization technique of the experimental optical sensitivity, based on ultrathin-film deposition. Finally, it is also demonstrated the capability of using the developed BICELLs in this thesis for real applications detection of hormones, virus and proteins.
Resumo:
La mejora de la calidad del aire es una tarea eminentemente interdisciplinaria. Dada la gran variedad de ciencias y partes involucradas, dicha mejora requiere de herramientas de evaluación simples y completamente integradas. La modelización para la evaluación integrada (integrated assessment modeling) ha demostrado ser una solución adecuada para la descripción de los sistemas de contaminación atmosférica puesto que considera cada una de las etapas involucradas: emisiones, química y dispersión atmosférica, impactos ambientales asociados y potencial de disminución. Varios modelos de evaluación integrada ya están disponibles a escala continental, cubriendo cada una de las etapas antesmencionadas, siendo el modelo GAINS (Greenhouse Gas and Air Pollution Interactions and Synergies) el más reconocido y usado en el contexto europeo de toma de decisiones medioambientales. Sin embargo, el manejo de la calidad del aire a escala nacional/regional dentro del marco de la evaluación integrada es deseable. Esto sin embargo, no se lleva a cabo de manera satisfactoria con modelos a escala europea debido a la falta de resolución espacial o de detalle en los datos auxiliares, principalmente los inventarios de emisión y los patrones meteorológicos, entre otros. El objetivo de esta tesis es presentar los desarrollos en el diseño y aplicación de un modelo de evaluación integrada especialmente concebido para España y Portugal. El modelo AERIS (Atmospheric Evaluation and Research Integrated system for Spain) es capaz de cuantificar perfiles de concentración para varios contaminantes (NO2, SO2, PM10, PM2,5, NH3 y O3), el depósito atmosférico de especies de azufre y nitrógeno así como sus impactos en cultivos, vegetación, ecosistemas y salud como respuesta a cambios porcentuales en las emisiones de sectores relevantes. La versión actual de AERIS considera 20 sectores de emisión, ya sea equivalentes a sectores individuales SNAP o macrosectores, cuya contribución a los niveles de calidad del aire, depósito e impactos han sido modelados a través de matrices fuentereceptor (SRMs). Estas matrices son constantes de proporcionalidad que relacionan cambios en emisiones con diferentes indicadores de calidad del aire y han sido obtenidas a través de parametrizaciones estadísticas de un modelo de calidad del aire (AQM). Para el caso concreto de AERIS, su modelo de calidad del aire “de origen” consistió en el modelo WRF para la meteorología y en el modelo CMAQ para los procesos químico-atmosféricos. La cuantificación del depósito atmosférico, de los impactos en ecosistemas, cultivos, vegetación y salud humana se ha realizado siguiendo las metodologías estándar establecidas bajo los marcos internacionales de negociación, tales como CLRTAP. La estructura de programación está basada en MATLAB®, permitiendo gran compatibilidad con software típico de escritorio comoMicrosoft Excel® o ArcGIS®. En relación con los niveles de calidad del aire, AERIS es capaz de proveer datos de media anual y media mensual, así como el 19o valor horario más alto paraNO2, el 25o valor horario y el 4o valor diario más altos para SO2, el 36o valor diario más alto para PM10, el 26o valor octohorario más alto, SOMO35 y AOT40 para O3. En relación al depósito atmosférico, el depósito acumulado anual por unidad de area de especies de nitrógeno oxidado y reducido al igual que de azufre pueden ser determinados. Cuando los valores anteriormente mencionados se relacionan con características del dominio modelado tales como uso de suelo, cubiertas vegetales y forestales, censos poblacionales o estudios epidemiológicos, un gran número de impactos puede ser calculado. Centrándose en los impactos a ecosistemas y suelos, AERIS es capaz de estimar las superaciones de cargas críticas y las superaciones medias acumuladas para especies de nitrógeno y azufre. Los daños a bosques se calculan como una superación de los niveles críticos de NO2 y SO2 establecidos. Además, AERIS es capaz de cuantificar daños causados por O3 y SO2 en vid, maíz, patata, arroz, girasol, tabaco, tomate, sandía y trigo. Los impactos en salud humana han sido modelados como consecuencia de la exposición a PM2,5 y O3 y cuantificados como pérdidas en la esperanza de vida estadística e indicadores de mortalidad prematura. La exactitud del modelo de evaluación integrada ha sido contrastada estadísticamente con los resultados obtenidos por el modelo de calidad del aire convencional, exhibiendo en la mayoría de los casos un buen nivel de correspondencia. Debido a que la cuantificación de los impactos no es llevada a cabo directamente por el modelo de calidad del aire, un análisis de credibilidad ha sido realizado mediante la comparación de los resultados de AERIS con los de GAINS para un escenario de emisiones determinado. El análisis reveló un buen nivel de correspondencia en las medias y en las distribuciones probabilísticas de los conjuntos de datos. Las pruebas de verificación que fueron aplicadas a AERIS sugieren que los resultados son suficientemente consistentes para ser considerados como razonables y realistas. En conclusión, la principal motivación para la creación del modelo fue el producir una herramienta confiable y a la vez simple para el soporte de las partes involucradas en la toma de decisiones, de cara a analizar diferentes escenarios “y si” con un bajo coste computacional. La interacción con políticos y otros actores dictó encontrar un compromiso entre la complejidad del modeladomedioambiental con el carácter conciso de las políticas, siendo esto algo que AERIS refleja en sus estructuras conceptual y computacional. Finalmente, cabe decir que AERIS ha sido creado para su uso exclusivo dentro de un marco de evaluación y de ninguna manera debe ser considerado como un sustituto de los modelos de calidad del aire ordinarios. ABSTRACT Improving air quality is an eminently inter-disciplinary task. The wide variety of sciences and stakeholders that are involved call for having simple yet fully-integrated and reliable evaluation tools available. Integrated AssessmentModeling has proved to be a suitable solution for the description of air pollution systems due to the fact that it considers each of the involved stages: emissions, atmospheric chemistry, dispersion, environmental impacts and abatement potentials. Some integrated assessment models are available at European scale that cover each of the before mentioned stages, being the Greenhouse Gas and Air Pollution Interactions and Synergies (GAINS) model the most recognized and widely-used within a European policy-making context. However, addressing air quality at the national/regional scale under an integrated assessment framework is desirable. To do so, European-scale models do not provide enough spatial resolution or detail in their ancillary data sources, mainly emission inventories and local meteorology patterns as well as associated results. The objective of this dissertation is to present the developments in the design and application of an Integrated Assessment Model especially conceived for Spain and Portugal. The Atmospheric Evaluation and Research Integrated system for Spain (AERIS) is able to quantify concentration profiles for several pollutants (NO2, SO2, PM10, PM2.5, NH3 and O3), the atmospheric deposition of sulfur and nitrogen species and their related impacts on crops, vegetation, ecosystems and health as a response to percentual changes in the emissions of relevant sectors. The current version of AERIS considers 20 emission sectors, either corresponding to individual SNAP sectors or macrosectors, whose contribution to air quality levels, deposition and impacts have been modeled through the use of source-receptor matrices (SRMs). Thesematrices are proportionality constants that relate emission changes with different air quality indicators and have been derived through statistical parameterizations of an air qualitymodeling system (AQM). For the concrete case of AERIS, its parent AQM relied on the WRF model for meteorology and on the CMAQ model for atmospheric chemical processes. The quantification of atmospheric deposition, impacts on ecosystems, crops, vegetation and human health has been carried out following the standard methodologies established under international negotiation frameworks such as CLRTAP. The programming structure isMATLAB ® -based, allowing great compatibility with typical software such as Microsoft Excel ® or ArcGIS ® Regarding air quality levels, AERIS is able to provide mean annual andmean monthly concentration values, as well as the indicators established in Directive 2008/50/EC, namely the 19th highest hourly value for NO2, the 25th highest daily value and the 4th highest hourly value for SO2, the 36th highest daily value of PM10, the 26th highest maximum 8-hour daily value, SOMO35 and AOT40 for O3. Regarding atmospheric deposition, the annual accumulated deposition per unit of area of species of oxidized and reduced nitrogen as well as sulfur can be estimated. When relating the before mentioned values with specific characteristics of the modeling domain such as land use, forest and crops covers, population counts and epidemiological studies, a wide array of impacts can be calculated. When focusing on impacts on ecosystems and soils, AERIS is able to estimate critical load exceedances and accumulated average exceedances for nitrogen and sulfur species. Damage on forests is estimated as an exceedance of established critical levels of NO2 and SO2. Additionally, AERIS is able to quantify damage caused by O3 and SO2 on grapes, maize, potato, rice, sunflower, tobacco, tomato, watermelon and wheat. Impacts on human health aremodeled as a consequence of exposure to PM2.5 and O3 and quantified as losses in statistical life expectancy and premature mortality indicators. The accuracy of the IAM has been tested by statistically contrasting the obtained results with those yielded by the conventional AQM, exhibiting in most cases a good agreement level. Due to the fact that impacts cannot be directly produced by the AQM, a credibility analysis was carried out for the outputs of AERIS for a given emission scenario by comparing them through probability tests against the performance of GAINS for the same scenario. This analysis revealed a good correspondence in the mean behavior and the probabilistic distributions of the datasets. The verification tests that were applied to AERIS suggest that results are consistent enough to be credited as reasonable and realistic. In conclusion, the main reason thatmotivated the creation of this model was to produce a reliable yet simple screening tool that would provide decision and policy making support for different “what-if” scenarios at a low computing cost. The interaction with politicians and other stakeholders dictated that reconciling the complexity of modeling with the conciseness of policies should be reflected by AERIS in both, its conceptual and computational structures. It should be noted however, that AERIS has been created under a policy-driven framework and by no means should be considered as a substitute of the ordinary AQM.
Resumo:
Uno de los defectos más frecuentes en los generadores síncronos son los defectos a tierra tanto en el devanado estatórico, como de excitación. Se produce un defecto cuando el aislamiento eléctrico entre las partes activas de cualquiera de estos devanados y tierra se reduce considerablemente o desaparece. La detección de los defectos a tierra en ambos devanados es un tema ampliamente estudiado a nivel industrial. Tras la detección y confirmación de la existencia del defecto, dicha falta debe ser localizada a lo largo del devanado para su reparación, para lo que habitualmente el rotor debe ser extraído del estator. Esta operación resulta especialmente compleja y cara. Además, el hecho de limitar la corriente de defecto en ambos devanados provoca que el defecto no sea localizable visualmente, pues apenas existe daño en el generador. Por ello, se deben aplicar técnicas muy laboriosas para localizar exactamente el defecto y poder así reparar el devanado. De cara a reducir el tiempo de reparación, y con ello el tiempo en que el generador esta fuera de servicio, cualquier información por parte del relé de protección acerca de la localización del defecto resultaría de gran utilidad. El principal objetivo de esta tesis doctoral ha sido el desarrollo de nuevos algoritmos que permitan la estimación de la localización de los defectos a tierra tanto en el devanado rotórico como estatórico de máquinas síncronas. Respecto al devanado de excitación, se ha presentado un nuevo método de localización de defectos a tierra para generadores con excitación estática. Este método permite incluso distinguir si el defecto se ha producido en el devanado de excitación, o en cualquiera de los componentes del sistema de excitación, esto es, transformador de excitación, conductores de alimentación del rectificador controlado, etc. En caso de defecto a tierra en del devanado rotórico, este método proporciona una estimación de su localización. Sin embargo, para poder obtener la localización del defecto, se precisa conocer el valor de resistencia de defecto. Por ello, en este trabajo se presenta además un nuevo método para la estimación de este parámetro de forma precisa. Finalmente, se presenta un nuevo método de detección de defectos a tierra, basado en el criterio direccional, que complementa el método de localización, permitiendo tener en cuenta la influencia de las capacidades a tierra del sistema. Estas capacidades resultan determinantes a la hora de localizar el defecto de forma adecuada. En relación con el devanado estatórico, en esta tesis doctoral se presenta un nuevo algoritmo de localización de defectos a tierra para generadores que dispongan de la protección de faltas a tierra basada en la inyección de baja frecuencia. Se ha propuesto un método general, que tiene en cuenta todos los parámetros del sistema, así como una versión simplificada del método para generadores con capacidades a tierra muy reducida, que podría resultar de fácil implementación en relés de protección comercial. Los algoritmos y métodos presentados se han validado mediante ensayos experimentales en un generador de laboratorio de 5 kVA, así como en un generador comercial de 106 MVA con resultados satisfactorios y prometedores. ABSTRACT One of the most common faults in synchronous generators is the ground fault in both the stator winding and the excitation winding. In case of fault, the insulation level between the active part of any of these windings and ground lowers considerably, or even disappears. The detection of ground faults in both windings is a very researched topic. The fault current is typically limited intentionally to a reduced level. This allows to detect easily the ground faults, and therefore to avoid damage in the generator. After the detection and confirmation of the existence of a ground fault, it should be located along the winding in order to repair of the machine. Then, the rotor has to be extracted, which is a very complex and expensive operation. Moreover, the fact of limiting the fault current makes that the insulation failure is not visually detectable, because there is no visible damage in the generator. Therefore, some laborious techniques have to apply to locate accurately the fault. In order to reduce the repair time, and therefore the time that the generator is out of service, any information about the approximate location of the fault would be very useful. The main objective of this doctoral thesis has been the development of new algorithms and methods to estimate the location of ground faults in the stator and in the rotor winding of synchronous generators. Regarding the excitation winding, a new location method of ground faults in excitation winding of synchronous machines with static excitation has been presented. This method allows even to detect if the fault is at the excitation winding, or in any other component of the excitation system: controlled rectifier, excitation transformer, etc. In case of ground fault in the rotor winding, this method provides an estimation of the fault location. However, in order to calculate the location, the value of fault resistance is necessary. Therefore, a new fault-resistance estimation algorithm is presented in this text. Finally, a new fault detection algorithm based on directional criterion is described to complement the fault location method. This algorithm takes into account the influence of the capacitance-to-ground of the system, which has a remarkable impact in the accuracy of the fault location. Regarding the stator winding, a new fault-location algorithm has been presented for stator winding of synchronous generators. This algorithm is applicable to generators with ground-fault protection based in low-frequency injection. A general algorithm, which takes every parameter of the system into account, has been presented. Moreover, a simplified version of the algorithm has been proposed for generators with especially low value of capacitance to ground. This simplified algorithm might be easily implementable in protective relays. The proposed methods and algorithms have been tested in a 5 kVA laboratory generator, as well as in a 106 MVA synchronous generator with satisfactory and promising results.
Resumo:
La tesis está centrada en el patrimonio industrial, y trata de ahondar en los temas enunciados en el título, Criterios de restauración, intervención y revitalización del patrimonio industrial (capítulo 1). La fábrica de gas de San Paolo en Roma (capítulo 2): En el primer capítulo, se profundiza en los criterios institucionalizados de actuación en el patrimonio, pero también se habla sobre la singularidad, los valores originales, estratificados en cada construcción y su contexto. Ello resume la intención de la doctoranda al entender la necesidad del análisis de cada obra en modo profundo, concreto y abierto a novedosos acercamientos, antes de su transformación. Al hablar de intervención frente a restauración, se aborda la conocida polémica que plantea el modo de acercarse al legado histórico. Parece necesario enunciar cómo se consideran en el trabajo estos términos. Mientras la restauración (como diría Cesare Brandi, constituye el momento metodológico del reconocimiento de la obra de arte en su consistencia física y en su doble polaridad estética e histórica, en orden a su transmisión al futuro) es una acción más restrictiva, que implica atención suma a la recuperación y conservación de los valores significativos y únicos del bien, en comunicación con un (posible) equipo interdisciplinar; por intervención se entiende aquí un desarrollo más personal y libre por parte del proyectista, en el que se produce un proceso dialéctico entre la preexistencia y el posicionamiento crítico adoptado a la hora de dar un obligado nuevo uso a ese bien. Es decir, el contraste está en el diferente reconocimiento de la materialidad física y sus significados. En torno a la restauración/intervención, se analizan las perspectivas de actuación en España e Italia, contrastando factores como la formación del arquitecto o el entorno laboral-cultural, y utilizando el método analítico comparativo de casos. Habría un tercer concepto: el de revitalización del patrimonio industrial, Éste hace referencia a su transformación, a sus usos más comunes y compatibles, a la redimensión artística que ha experimentado la arquitectura industrial gracias al arte contemporáneo y a su relación con la Modernidad. Por último, se enuncia en el título el caso de estudio, la Fábrica, que ocupa el segundo capítulo. Se trata de un enorme conjunto industrial singular semi abandonado en el confín del centro histórico, cuyo protagonista es un gran gasómetro, que la autora ha tenido la oportunidad de descubrir en su estancia en la Ciudad Eterna. Este barrio constituyó el primer y único sector industrial de la Roma moderna a inicios del siglo XX. Por varias causas históricas y voluntad política, la ciudad prácticamente no tuvo más desarrollo industrial que el área mencionada, donde se implantaron servicios y actividades de gran transformación (Matadero, Mercados Generales, Almacenes Fluviales, Central Montemartini o esta fábrica). A partir de 1920, se empezó a construir un tejido productivo que la llevó de la situación de posguerra al milagro económico. Frente al mito de la Roma monumental o de la Roma cotidiana, aparece el aspecto industrial como mito de la contemporaneidad. Sin embargo, esta ciudad es demasiado antigua como para convertirse en moderna, y su proceso industrial en contraste con su larga historia resulta breve. La inmediata relación de la fase industrial romana con el resultado de este desarrollo viene identificada con las instalaciones señaladas, más significativas por su excepcionalidad que por la duración del momento irrepetible que representan. Su presencia física perdura a pesar de su abandono, aisladas tras su muro perimetral y casi desconocidas. Esto las hace apetecibles para la especulación inmobiliaria y resultan un caso de estudio ideal para realizar un Plan de Intervención Global, en el que determinar una serie de intervenciones necesarias, usos compatibles y directrices para la ordenación del conjunto, coherentes con los conceptos manejados en el primer capítulo. ABSTRACT The thesis focuses on industrial heritage, delving into the topics listed in its title, Criteria for the restoration, intervention and revitalisation of industrial heritage (chapter 1). The San Paolo gas factory in Rome (chapter 2): Chapter one elaborates on the official criteria to take action on heritage, but also deals with the singularity and original values unique to each construction and its context. This underlines the PhD candidate’s intentions by understanding the need for an in-depth and specific analysis, open to novel approaches to each site before its transformation. When speaking of intervention, as opposed to restoration, we address the well-known controversy that stems from the different ways of approaching historical heritage. It seems necessary to explain how these terms are interpreted in this piece of work. Whereas restoration (as Cesare Brandi would say, constitutes the methodological moment in which the work of art is appreciated in its material form and in its historical and aesthetic duality, with a view to transmitting it to the future) is a more restrictive action, demanding the utmost attention to the recovery and preservation of the piece of heritage’s defining and exceptional values, (ideally) in communication with a interdisciplinary team. By intervention, we hereby understand a more personal and free procedure carried out by the designer in which a dialectical process takes place between preexistence and the critical stance taken in order to give that good a much needed new use. That is, contrast lies in the different recognition of physical materiality and its meanings. As for the restoration/intervention dilemma, the different courses of action followed in Spain and Italy will be analysed, contrasting the architects’ training, the labourcultural environment and taking an analytical comparative case study method. There is a third concept: the revitalisation of industrial heritage, which refers to its transformation, its most common and compatible uses, the artistic redimensioning that industrial architecture has experienced thanks to contemporary art, and its relationship with Modernity. Lastly, the title refers to the case study, i.e., the analysis of the Factory, which makes up chapter 2. It is an enormous and semiabandoned peerless industrial complex on the edge of the historical city centre whose main landmark is a huge gasometer, which the author had the chance to discover during her stay in the Eternal City. This district made up the first and only industrial sector in the modern Rome of the early 20th century. Due to a number of reasons, both historical and political, barely no further industrial development took place in the city beyond the mentioned area, where processing services and activities were set up (Slaughterhouse, General Markets, Riverside Warehouses, Montemartini Power Plant or the said factory). In the 1920s began the construction of the productive fabric that raised the city from its postwar plight to the economic miracle. As opposed to the myth of monumental Rome and daily-life Rome, this industrial Rome rose as contemporaneity’s myth. However, this city is too ancient to become modern, and its industrial process strikes us as brief when confronted with its long history. The close relationship between Rome’s industrial stage and the consequences of this development is best represented by the aforementioned facilities, more relevant due to their uniqueness than the length of the once-in-a-lifetime moment they represent. Their physical presence lives on despite abandonment and isolation, as they stand vastly unknown behind their perimeter walls. This renders them appealing to property speculators, becoming an ideal case study for the creation of a Global Intervention Plan in which to determine a series of necessary actions, compatible uses and directives, all of them consistent with the concepts dealt with in chapter 1. RIASSUNTO La tesi è focalizzata sul patrimonio industriale e cerca di approfondire le tematiche contenute nel titolo, Criteri di restauro, intervento e rivitalizzazione del patrimonio industriale (capitolo 1). La Fabbrica del gas di San Paolo a Roma (capitolo 2): Nel primo capitolo vengono presi in esame i criteri istituzionalizzati di attuazione nel patrimonio, ma si parla anche della unicità, i valori originali, stratificati in ogni costruzione ed il suo contesto. Questo riassume l’intenzione della dottoranda di capire la necessità dell’analisi di ogni opera in modo profondo, concreto e aperto a nuovi approcci, prima della sua trasformazione. Nel parlare di intervento versus restauro, si affronta la famosa polemica che considera il modo di avicinarsi all’eredità storica. Appare necessario precisare come questi termini sono considerati in questo lavoro. Mentre il restauro (come direbbe Cesare Brandi, costituisce il momento metodologico del riconoscimento dell’opera d’arte nella sua consistenza fisica e nella duplice polarità estetica e storica, in vista della sua trasmissione nel futuro) è un’azione più restrittiva, e quindi implica massima attenzione al recupero e conservazione dei valori significativi ed unici del bene, in comunicazione con una (eventuale) squadra interdisciplinare; per intervento si intende qui un processo più personale e libero del progettista, nel quale si produce uno sviluppo dialettico tra la preesistenza e la posizione critica adottata quando si deve dare un nuovo uso di quel bene. Vale a dire che il contrasto risiede nel diverso riconoscimento della materialità fisica e i loro significati. Intorno al restauro / intervento, si analizzano le prospettive di attuazione in Spagna e Italia, contrastando diversi fattori come la formazione dell’architetto o l’ambiente lavorativo-culturale, ed impiegando il metodo analitico comparativo dei casi. Ci sarebbe un terzo concetto: quello della rivitalizzazione del patrimonio industriale. Questo fa riferimento alla sua trasformazione, ai suoi usi più comuni e compatibili, al ridimensionamento artistico vissuto dall’archeologia industriale grazie all’arte contemporanea ed al suo rapporto con la Modernità. In ultimo, si enuncia nel titolo il caso di studio, ovvero l’analisi della Fabbrica, che occupa il secondo capitolo. Si tratta di un enorme complesso industriale semi-abbandonato al confine con il centro storico, il cui protagonista è un grande gasometro, che l’autrice ha avuto modo di scoprire durante il suo soggiorno nella Città Eterna. Questo quartiere costituì il primo e unico moderno settore industriale della Roma moderna all’inizio del Novecento. Per diverse ragioni storiche e volontà politiche, la città praticamente non ha subito ulteriore sviluppo industriale oltre l’area citata, dove si impiantarono servizi e attività di grande trasformazione (Mattatoio, Mercati Generali, Magazzini Generali, Centrale Montemartini o questa fabbrica). Dal 1920, si inizió a costruire un tessuto prodottivo che portò la città dalla situazione post-bellica al miracolo economico. Di fronte al mito della Roma monumentale o della Roma quotidiana, appare questa Roma industriale come mito della contemporaneità. Tuttavia, questa città è troppo antica per diventare moderna, ed il suo processo industriale in contrasto con la sua lunga storia risulta breve. Il rapporto diretto della fase industriale romana con il risultato di questo sviluppo viene identificato con gli impianti segnalati, più significativi per la loro unicità che per la durata del momento irripetibile che rappresentano. La loro presenza fisica perdura nonostante l’abbandono, isolati dietro il loro muro di cinta e quasi sconosciuti. Questo li rende auspicabile per la speculazione immobiliare e sono un caso ideale per eseguire un Piano di Intervento Globale, che determini una serie di interventi necessari, usi compatibili e linee guida per la pianificazione del tutto, in linea con i concetti utilizzati nel primo capitolo.
Resumo:
Los Sistemas de Información Geográfica nos permiten estudiar la evolución en el tiempo de cualquier fenómeno o hecho físico que se pueda referenciar geográficamente. En el presente trabajo se realiza un estudio, mediante un Sistema de Información Geográfica, del desarrollo industrial de la Ciudad de Alcoy en el P. G. O. U. de 1957. En el tiempo de duración de este plan, que abarca un período de 32 años, con una única revisión en 1982, la ciudad ha sufrido grandes transformaciones económicas, sociales, industriales y urbanísticas. El trabajo pretende, por una parte, elaborar la cartografía de la evolución que ha sufrido la localización de la industria alcoyana y realizar un análisis en el que quede de manifiesto la política industrial llevada a cabo por las Administraciones y las consecuencias que ha tenido para el desarrollo de la ciudad. En segundo lugar, se pretende estudiar las posibilidades de una aplicación GIS como GeoMedia en la realización de dicho estudio, así como analizar el proceso para la realización del trabajo: digitalización de mapas, referenciación geográfica, utilización de mapas digitales, definición de entidades y clases de entidad, bases de datos a utilizar, consultas a realizar etc.
Resumo:
At head of title: Pennsylvania. Department of Internal Affairs.
Resumo:
Cover title.
Resumo:
WI docs. no.: DEV 2.6/2:B 8/1958-1977.
Resumo:
Item 1005-C
Resumo:
The present scarcity of operational knowledge-based systems (KBS) has been attributed, in part, to an inadequate consideration shown to user interface design during development. From a human factors perspective the problem has stemmed from an overall lack of user-centred design principles. Consequently the integration of human factors principles and techniques is seen as a necessary and important precursor to ensuring the implementation of KBS which are useful to, and usable by, the end-users for whom they are intended. Focussing upon KBS work taking place within commercial and industrial environments, this research set out to assess both the extent to which human factors support was presently being utilised within development, and the future path for human factors integration. The assessment consisted of interviews conducted with a number of commercial and industrial organisations involved in KBS development; and a set of three detailed case studies of individual KBS projects. Two of the studies were carried out within a collaborative Alvey project, involving the Interdisciplinary Higher Degrees Scheme (IHD) at the University of Aston in Birmingham, BIS Applied Systems Ltd (BIS), and the British Steel Corporation. This project, which had provided the initial basis and funding for the research, was concerned with the application of KBS to the design of commercial data processing (DP) systems. The third study stemmed from involvement on a KBS project being carried out by the Technology Division of the Trustees Saving Bank Group plc. The preliminary research highlighted poor human factors integration. In particular, there was a lack of early consideration of end-user requirements definition and user-centred evaluation. Instead concentration was given to the construction of the knowledge base and prototype evaluation with the expert(s). In response to this identified problem, a set of methods was developed that was aimed at encouraging developers to consider user interface requirements early on in a project. These methods were then applied in the two further projects, and their uptake within the overall development process was monitored. Experience from the two studies demonstrated that early consideration of user interface requirements was both feasible, and instructive for guiding future development work. In particular, it was shown a user interface prototype could be used as a basis for capturing requirements at the functional (task) level, and at the interface dialogue level. Extrapolating from this experience, a KBS life-cycle model is proposed which incorporates user interface design (and within that, user evaluation) as a largely parallel, rather than subsequent, activity to knowledge base construction. Further to this, there is a discussion of several key elements which can be seen as inhibiting the integration of human factors within KBS development. These elements stem from characteristics of present KBS development practice; from constraints within the commercial and industrial development environments; and from the state of existing human factors support.
Resumo:
The chapter examines possibilities for industrial policy in African countries through the lens of lessons that can be learned from the industrial policy approaches pursued in Ireland as well as in East Asia. As latecomers to industrialization, the small African economies are well positioned to undertake such an exercise, we suggest. This chapter provides some novel insights by providing a comparison between Ireland and the small African economies. To our knowledge such a comparison offers a unique contribution. Cognizant of the fact that a “one size fits all” approach to industrial policy is not appropriate in the African context, we argue in favor of the adoption of a more “holistic” approach to industrial policy in these economies. Such an approach we argue should focus simultaneously on demand and supply factors of industrial development, and on microeconomic as well as macroeconomic factors.
Resumo:
This study investigated the differences in personality, consistent with the vocational theory of personality as proposed by Holland (1997), for a modern day firefighter. This study also investigates the relationships between personality characteristics and job duties performed by firefighters and firefighter-paramedics. Archival data from employees (N = 98) of a Southeastern Florida fire department who completed the Hogan Personality Inventory (HPI), Hogan Development Survey (HDS) and Motives, Values, Preferences Inventory (MVPI), as well as a self-report questionnaire on variety proneness (boredom), job satisfaction, and affective well-being data were analyzed. The scores of the firefighters on the HPI, HDS, and MVPI were used as predictive data, and criterion data used in this study were self-report satisfaction data on job involvement, variety proneness (boredom), and affective well-being. In addition, criterion data on performance were obtained from the employment histories of the participants, and were correlated with the personality scale scores to determine if personality is predictive of aspects of performance. ^ Participants in this study varied with respect to the type of firefighter duties required from them on their jobs. The participants were categorized into three duty classifications: Group 1 (G1) are the firefighters hired before 1990 and are only certified as firefighters; Group 2 (G2) are the firefighters hired before 1990 who became paramedics at some point after employment and after fire college training; and Group 3 (G3) are the firefighters hired after 1990 who were trained as paramedics in the fire college and who were aware of the paramedic requirement at time of application or were already trained as paramedics at the time of application. From the research reviewed and presented in this paper, hypotheses were generated about differences between the personality types of firefighter groups G1 and G2 versus G3, in accordance with Holland's theories. In addition, it was hypothesized that personality will predict outcomes of satisfaction and performance. ^ Results found that job satisfaction was not found to be statistically different among the groups. However, the groups differed significantly on 5 of the predictive instrument scales, and personality was found to be a predictor of limited performance data. ^
Resumo:
While mining is a major component of the northern Canadian economy, including the contemporary mixed economy of Aboriginal communities, it often leaves legacies of environmental and economic transformation that persist after closure. The legacies of historical mines in northern Canada challenge industry claims of sustainability. This thesis addresses how industrial mineral development and closure continue to affect local environments and economies after abandonment. The abandoned Pine Point mine in the Northwest Territories provides a case study for explaining the ongoing relationships among land cover, land use, and the post-industrial landscape. Drawing from landscape ecology and micropolitical ecology, I adopt an interdisciplinary approach to examine environmental and socioeconomic changes in the wake of industrial development and closure at Pine Point. The results show that passive reclamation is not sufficient for restoring ecological function in a subarctic environment. Land use, however, persists as land users adapt to the post-industrial landscape despite grave concern about its environmental condition. If mining is to be considered sustainable, decommissioning and reclamation must explicitly account for long-term environmental transformation as well as ongoing post-industrial land use, particularly in Aboriginal contexts.
Resumo:
This thesis explores the impact international trade and commercial agreements had on the economic and industrial development of Cork during the first industrial revolution. From the Act of Union onwards Cork moved from a region where trade became increasingly reliant on Britain at the expense of trade that had been cultivated over the eighteenth century with the Americas and Europe. The legislative underpinnings of Cork’s trade is the focus of this research and how this changed after the Act of Union. It begins by examining the transatlantic trade of Cork city and the issues faced in the West Indies trade due to the growth of the United States. It will also consider the impact of the Napoleonic Wars on Cork’s trade with both the Americas and continental Europe. The conclusion of the Napoleonic Wars saw the United Kingdom negotiate treaties and agreements that would have a direct impact upon Cork’s merchants. This thesis will address the degree to which the mercantile community in Cork were able to influence policy that directly impacted upon their trade networks. It will then examine the trade between Cork and the United Kingdom and assess the impact of the Union on the ability of Cork’s merchants to affect political change. The operation of the Committee of Merchants in Cork is detailed and their responses to the changing nature of international trade. The thesis finishes by examining the underdevelopment of Cork’s transportation networks. This work will place Cork’s international trade in both its national and international context and argues that Cork’s mercantile community were overly reliant on protectionist legislation to further Cork’s trade as opposed to investment in industrial development. Volumetric data on the trade of Cork city has been transcribed and made available in a relational database to support the arguments made in this thesis and to facilitate future research on this subject. This database is accessible at http://modernirishvenice.com/.