Landing gear for a 'silent' aircraft

The Silent Aircraft Initiative aims to provide a conceptual design for a large passenger aircraft whose noise would be imperceptible above the background level outside an urban airfield. Landing gear noise presents a significant challenge to such an aircraft. 1/10th scale models have been examined with the aim of establishing a lower noise limit for large aircraft landing gear. Additionally, the landing gear has been included in an integrated design concept for the 'Silent' Aircraft. This work demonstrates the capabilities of the closed-section Markham wind tunnel and the installed phased microphone arrays for aerodynamic and acoustic measurements. Interpretation of acoustic data has been enhanced by use of the CLEAN algorithm to quantify noise levels in a repeatable way and to eliminate side lobes which result from the microphone array geometry. Results suggest that highly simplified landing gears containing only the main struts offer a 12dBA reduction from modern gear noise. Noise treatment of simplified landing gear with fairings offers a further reduction which appears to be limited by noise from the lower parts of the wheels. The importance of fine details and surface discontinuities for low noise design are also underlined.

Gear modifications for fishing octopus, Octopus vulgaris, on live-bottom and adjacent flat bottom habitats in coastal waters off North Carolina

The Common Octopus, Octopus vulgaris, is an r-selected mollusk found off the coast of North Carolina that interests commercial fishermen because of its market value and the cost-effectiveness of unbaited pots that can catch it. This study sought to: 1) determine those gear and environmental factors that influenced catch rates of octopi, and 2) evaluate the feasibility of small-scale commercial operations for this species. Pots were fished from August 2010 through September 2011 set in strings over hard and sandy bottom in waters from 18 to 30 m deep in Onslow Bay, N.C. Three pot types were fished in each string; octopus pots with- and without lids, and conch pots. Proportional catch was modeled as a function of gear design and environmental factors (location, soak time, bottom type, and sea surface water temperature) using binomially distributed generalized linear models (GLM’s); parsimony of each GLM was assessed with Akaike Information Criteria (AIC). A total of 229 octopi were caught throughout the study. Pots with lids, pots without lids, and conch pots caught an average of 0.15, 0.17, and 0.11 octopi, respectively, with high variability in catch rates for each pot type. The GLM that best fit the data described proportional catch as a function of sea surface temperature, soak time, and station; greatest proportional catches occurred over short soak times, warmest temperatures, and less well known reef areas. Due to operating expenses (fuel, crew time, and maintenance), low catch rates of octopi, and high gear loss, a directed fishery for this species is not economically feasible at the catch rates found in this study. The model fitting to determine factors most influential on catch rates should help fishermen determine seasons and gear soak times that are likely to maximize catch rates. Potting for octopi may be commercially practical as a supplemental activity when targeting demersal fish species that are found in similar habitats and depth ranges in coastal waters off North Carolina.

Technical terms in fishing gear materials and gear fabrication

Papers dealing with technical terms in fisheries science are few. This paper however, covers only one or two aspects of the subject, namely fishing gear materials and fishing gear fabrication. Similar papers on other aspects are also planned. Short explanations or descriptions are also given wherever considered necessary.

A preliminary account and review of the simple methods for determining the operational parameters of fishing gear, underwater, with notes on its application

An account and review of the simple methods for determining the operational parameters of fishing gear, underwater, such a tilt of otter boards (outwards or inwards, forwards or afterwards), vertical height of net, its horizontal spread, angle of divergence at bosom, spread between wing tips, angle of inclination of danlenos, butterfly, slope of legs and sweep-line has been given. The relationship of distance between the otter boards spread and the vertical height of net has been obtained as generally linear. The possibilities of regulating the vertical height of net (dependent variate) and spread of otter boards (independent variate) for increasing the fishing efficiency has been discussed. The angle of attack of oval shaped otter boards used during the operations still remain undetermined, however, it has been explained how the best angle of attack for increasing the efficiency of gear can be obtained by regulating the ratio of depth to warp for a given net. The inadequacy of the mere indices of catch per hour of trawling in comparing the relative efficiency of trawls in gear research studies has been indicated. The importance of estimating the operational parameters and its application to commercial fisheries depending upon the distribution pattern of fish and in gear research has been discussed. The efficiency of the jelly bottle method has been compared statistically with the observations made on the trawl gear underwater with instruments.

Fishing gear and methods of the river Brahmaputra in Assam

Potentially the inland fishery resources of the country are of very high order. But the present level of their exploitation is far from optimum, mainly because of the inadequacies of the existing fishing gear and methods. There is vast scope for increasing the fish production from inland waters by improving the existing gear and methods. This would require a thorough study of the fishing gear and methods in vogue, of which very little is known at present. In the present communication the authors discuss the fishing gear and methods of the river Brahmaputra, in Assam, based on a survey carried out by them during January-February 1964. The survey covers a 640 km stretch of the Brahmaputra River, its important tributaries and connected bheels, from Dhubri to Dibrugarh. As a result of the survey about 19 types of fishing nets, which could be grouped into eight classes, were identified. The salient technological features of the gears and their methods of operation are discussed class-wise. The characteristics of the individual types are shown in tables. The materials used for gear and gear accessories, are briefly discussed. The classification and relative importance of different types of gear are examined. Besides, the influence of the ecological and topographical features of the river on the development of different types of fishing gears, is also discussed.

Mechanization of fishing craft and the use of improved fishing gear

Since the year 1925, attention has been focused periodically on the stagnation in the local fishing industry, and those who have studied the subject have been unanimous about the need to introduce modern fishing craft which are capable of working more fishing gear. This report outlines the stages through which the evolution of more effective fishing operations has progressed, both in the gradually increasing use of mechanical propulsion for boats and in the adoption of more modern gear and techniques by local fishermen. No reference is made in this report to the operation of deep-sea trawlers (Sivalingam, 1956) a phase of development which has hitherto not influenced the local fishing industry to any appreciable extent.

Fishing gear research at the Central Institute of Fisheries Technology

The Craft and Gear Wing of the Central Institute of Fisheries Technology was established to develop the country's fishing boats and implements scientifically and systematically. The Wing was organized in the year 1957 as a part of the fisheries development schemes included under the Second Five Year Plan.

Instrumentation in fishing gear research

The general method of study of the performance of any dynamic system is to have an understanding of the various influencing factors. These include the dynamic parameters developed by the system as well as the external factors. In the case of a trawl net under operation there are many hydrodynamic forces acting on it. Since the trawl net is operated much below the water surface, visual observation is rather difficult. Model testing is an alternative method. However, as a model cannot be an exact replica of the original in all respects, model testing has only a limited application and an ultimate test with the actual gear in the true field conditions is necessary.

Bottom trawl codend mesh selectivity for Bagrus docmac (Forskahl) from Lake Victoria, with some remarks on the proposed trawl fishery

The methods of estimating codend selectivity for alternate hauls are briefly described and applied to Bagrus docmac (forskahl) data from Lake Victoria. Certain inconsistencies are noted and it is postulated that they may be due to differential escapement of larger Bagrus docmac through the trawl meshes when the different codends were fitted. The calculated 50% selection lengths yielded a fair regression on measured weigh give a fork length selection factor of 2.33, consistent with data from the smallest codend mesh size used. The implications of the findings are briefly discussed in relation to the proposed Haplochromis trawl fishery 1971.

Sirahu Valai: a passive fishing gear in Ceylon

There are many types of passive fishing gear in use in the estuarine waters and lagoons in Ceylon such as the stake seine net or Kattudel, the tat trap or Jalcottu and the wing net or Sirahu valai. Of these Siraku valai is very popular in the shallow and near shore areas of the sea in north Ceylon. Sirahu valai is popular since it is relatively more economical, less time consuming and more efficient than other forms of fishing gear in shallow waters. More over the fishermen do not have to remain in the fishing grounds while his gear is fishing. Pearson (1923) described this gear as a stake net having a complicated arrangement. Sirahu valai is also referred to as Siraku valai or Kurukku valai.

Management strategies for exploitation of Uganda fisheries resources

Fisheries legislation in Uganda has not been feasibly applicable to all Uganda water bodies and species therein. Failure to make appropriate legislation to regulate fishing gears and methods has led to the decline or near collapse of some fisheries. Most fisheries have been damaged by destructive fishing gears and methods. Selectivity characteristics of several gears and fishing methods were therefore examined for different commercially important fish species in major and minor lakes and recommendations made on suitable types of gears, gear sizes and fishing methods for exploitation of the fisheries resource.

East African Freshwater Fisheries Research Organization Annual Report 1972

Feeding habits of many animals have been used widely in animal classifications. This is so, because the type of diet an organism requires demands structural specialisation which will utilise the available resource. Many animals may however have many structural modifications to enable them to be described as omnivourous or generalised feeders such as H. empodisma and H. riponianus (GREENWOOD 1960) which may show varying degrees of structural and adaptational intermediacy between two trophic groups. Generally, however, the diet of many animals including fish changes as the animal grow larger. The change in structural modifications is usually correlated with changes in the diet. In fishes the change may involve change from tricuspid to biscuspid and finally to unicuspid type of teeth. The degree of modification in the structure depends on the diet, thus Haplochromis that feeds on soft tissues of snails only requires modifications in oral dentition while Haplochromis that feeds on both soft tissues and shells of snails require modification in the lower pharyngeal bone for grinding purposes. Other modifications connected with food utilisation may be located in the alimentary canal. (I) The fish species that are commercially exploited are Protopterus aethiopicus, Clarias mossambicus, Tilapia esculenta, Tilapia amphimelas and Tilapia hybrids. The other fish species present in the lake but not commercially exploited are: Gnathonemus sp. Alestes sp. Labeo sp., Barbus paludinoses, Barbus jacksoni, Barbus lineomaculatus, Barbus regersi, Leptogrlanis sp., Schilbe sp., Haplochromis spp. and Hemihaplochromis sp. (2) Protopterus sp. and Clarias sp. are mostly caught with hooks on long lines. There has been a steady increase in number of hooks on the lake. Since the stocks of Protopterus and C/arias in the lake have a limit, we should control the number of hooks used by each of the fishermen in order to avoid overharvesting. (3) All the previous studies on Lake Kitangiri fisheries suggested the use of gill nets with mesh size greater than 88.9 mm in order to avoid the capture of immature Ti/apia spp. But if the fishermen are to obtain economic gains from the fishery, the optimum mesh size for use is 88.9 -101.6 mm. (4) The gillnet is a passive gear with very beneficial selective characteristics. Unfortunately the drive-in fishery which exists on Lake Kitangiri more or less destroys the gillnet selectivity characteristics. It is therefore recommended that the beating of water with poles be discouraged and stopped. (5) There is need for provision of stable fishing canoes to replace the unstable bottle palm dug-out canoes which are currently being used and which are very risky to operate. (6) The fish processing facilities on Lake Kitangiri are still inadequate. Most of the fish is sun dried, Since sun drying is very difficult during the rainy season, most fishermen carry out intensive fishing during the dry season, Concentrating most of the fishing effort in anyone season instead of spreading evenly this effort over the whole year could damage the age structure of the exploitable stocks. (7) There are considerable fluctuations in the volume of water of the lake. The feasibility of regulating the water loss through the effluent Sibiti river should be investigated by the Water Development Department. (8) Damming the Sibiti river is an expensive undertaking and therefore, the Rural Development Bank of Tanzania should be asked to assess the economic feasibility of such a project.