The mitochondrial 12S gene is a suitable marker of populations of Sarcoptes scabiei from wombats, dogs and humans in Australia

We sequenced part of the mitochondrial 12S ribosomal RNA gene of 23 specimens of Sarcoptes scabiei from eight wombats, one dog and three humans. Twelve of the 326 nucleotide positions varied among these mites and there were nine haplotypes (sequences) that differed by 1-8 nucleotides. Phylogenetic analyses indicated that these mites were from two lineages: (1) mites from wombats from Victoria, Australia, and mites from the humans and dog from the Northern Territory, Australia (haplotypes 1-4, 9); and (2) mites from the humans and dog from the Northern Territory (haplotypes 5-8). Mites from the three different hosts (wombats, a dog and humans) had not diverged phylogenetically; rather, these mites had similar 12S sequences. Thus, we conclude that these mites from wombats, humans and a dog are closely related, and that they diverged from a common ancestor relatively recently. This conclusion is consistent with the argument that people and/or their dogs introduced to Australia the S. scabiei mites that infect wombats Australia. So, S. scabiei, which has been blamed for the extinction of populations of wombats in Australia, may be a parasitic mite that was introduced to Australia with people and/or their dogs. These data show that the mitochondrial 12S rRNA gene may be a suitable population marker of S. scabiei from wombats, dogs and humans in Australia.

Parenthood and pay in Australia and the UK: evidence from workplace surveys

This article addresses the effect of parenthood on pay, examining potential reasons for-differences between Australia and the UK that are evident in spite of their similarly minimalist. male, breadwinner style approaches to work/family issues, Although cross-national differences reflect complex intersections of policy combinations, institutional frameworks, patterns of employment and gender contracts that cannot be assessed in a single analysis, the data used in this analysis uncover some of the factors that contribute to different outcomes. Motherhood penalties in the UK appear to be associated primarily with the comparatively low level of part-time earnings in that country, while higher premiums to fatherhood at least in part reflect a wider overall wage distribution. These findings reinforce the heed to interpret earnings effects of parenthood within the context of national patterns of employment and wage distribution; and highlight the breadth of strategies needed to deliver more equitable outcomes.

Diversity and change in Australia's rangelands: a post-productivist transition with a difference?

Australia's rangelands are experiencing a post-productivist transition at a tempo comparable to Western Europe's, but in contexts that ensure marked divergence in impulses, actors, processes and outcomes. In Australia's most marginal lands, a flimsy mode of pastoral occupance is being displaced by renewed indigenous occupance, conservation and tourism, with significant changes in land ownership, property rights, investment sources and power relations, but also with structural problems arising from fugitive income streams. The sharp delineation between structurally coherent commodity-oriented regions and emerging amenity-oriented regions can provisionally be mapped at a national scale. A comparison of Australia with Western Europe indicates that three distinct but interconnected driving forces are propelling the rural transition, namely: agricultural overcapacity; the emergence of amenity-oriented uses; and changing societal values.

The effect of water, brine and ethanol flotation on the quality and shelf life of macadamia kernels 2. Kernel pieces

Raw macadamia kernel pieces were immersed in water (specific gravity 1.00 g/cm(3)), brine (SG 1.02 g/cm(3)) or ethanol solution (SG 0.97 g/cm(3)) for 30 or 60 s, then re-dried to below 1.5% moisture (wet basis) and stored under vacuum for 0, 4 and 12 months. Flotation in water had no effect on the quality or shelf life of the kernel pieces over 12 months storage, as measured by sensory evaluation of the kernels and chemical analysis of the kernel oil. Immersion in a salt solution caused unacceptable changes in quality during storage, increasing as storage time increased. Flotation in dilute ethanol also caused unacceptable quality changes during storage. Therefore, only flotation of macadamia kernel pieces in water can be recommended for commercial operations. Microbiological concerns with such a process still need to be addressed.

Survival of conidia of sorghum ergot (caused by Claviceps africana) on panicles, seed and soil in Australia

Macroconidia of the sorghum ergot pathogen, Claviceps africana Frederickson, Mantle & de Milliano, survived in dried honeydew on soil for 13-14 weeks in a glasshouse at ambient temperatures, but for less than half that time on seed stored in a shadehouse over summer. Those on seeds stored at 4degreesC, however, survived for over a year (58-62 weeks). During summer, conidia on ergot-infected panicles buried in soil, or on the soil surface, survived for 7.5-12 weeks, whereas over winter the survival times were 4 weeks and 19-27 weeks, respectively. Macroconidia on infected panicles held above the soil surface survived for >38 weeks (8 calendar months) over winter, suggesting that they may play a role in the perennation of C. africana in Australia.

The effect of water, brine and ethanol flotation on the quality and shelf life of macadamia kernels - 1. Whole kernels

Whole macadamia kernels were immersed in water (specific gravity 1.00 g/cm(3)), brine (SG 1.02 g/cm(3)) and ethanol solution (SG 0.97 g/cm(3)) for 30 or 60 s, re-dried to 1.0-1.5% moisture (wet basis) and stored under vacuum for 0, 4 and 12 months. Immersion in water had no effect on the quality or shelf life of kernels, as measured by sensory evaluation and analysis of the kernel oil. Immersion in brine and ethanol solutions changed the flavour of kernels, but had no effect on shelf life or kernel oil stability over 12 months storage. Water flotation to separate kernels based on differences in oil content is therefore feasible, but microbiological concerns need to be investigated.

A survey of sodium hypochlorite use by general dental practitioners and endodontists in Australia

Background: Sodium hypochlorite is used commonly as an endodontic irrigant, but there are no published reports that provide details of its use. This survey sought to determine the percentage of Australian dentists who practiced endodontics, whether they used sodium hypochlorite for irrigation, and the manner of dilution, storage and dispensing sodium hypochlorite used by both dentists and endodontists. Methods: All Australian endodontists and a stratified random sample of 200 general dentists in Australia were surveyed to address the issues identified above. Results: Almost 98 per cent of dentists surveyed performed endodontic treatment. Among endodontists, nearly 94 per cent used sodium hypochlorite for irrigation compared with just under 75 per cent of general dentists: Sodium hypochlorite use by general dentists was more common in Victoria and South Australia than in other States. An infant sanitizer (Milton or Johnson's Antibacterial Solution) was used by just over 92 per cent of general practitioners and by more than 67 per cent of endodontists. All other respondents used domestic bleach. One hundred and sixty four of the respondents (80 per cent of endodontists and over 90 per cent of general dentists) used a 1 per cent w/v solution. Ten practitioners used a 4 per cent w/v solution, five used a 2 per cent w/v solution and four used a 1.5 per cent w/v solution. Eighty per cent of the practitioners who diluted their sodium hypochlorite before use, used demineralized water for this purpose. The remainder used tap water. Only four practitioners stored sodium hypochlorite in a manner which risked light exposure and loss of available chlorine content. Conclusions: Sodium hypochlorite is commonly used as an endodontic irrigant and Australian dentists generally stored the material correctly.

A survey of bacterial diversity in ticks, lice and fleas from Australia

We isolated bacteria from ticks, lice and fleas. Partial small subunit rRNA sequences were obtained for each isolate and the closest matches in the FastA database were determined. These bacteria were mostly Gram-positive (Firmicutes), although representatives from the Proteobacteria (alpha, beta, gamma subdivisions) and CFB group were also isolated. Most of the isolates we found were from genera that were present in most of the ectoparasites studied, but a few genera were restricted to one species of ectoparasite. The most commonly isolated genera were Stenotrophomonas, Staphylococcus, Pseudomonas, Acinetobacter and Bacillus. Species of Bacillus and Proteus, which have biopesticide potential, were found in some of these ectoparasites. Overall, the communities of bacteria were similar to those found in other studies of parasitic arthropods.

Translating policy: Power and action in Australia's country towns

Controversies In its present condition, rural Australia is characterised by a discourse of decline that sees country towns and regions as places of demoralisation and despair. From a Foucauldian governmentality perspective, those who live in these spaces are not so much 'powerless' to the demands of urban-based governments and global capital, as rendered governable according to the socio-political ambitions of late capitalism. While important insights have been derived from such analyses, it is argued in this paper that excessive attention is often paid to the power of the state with little concern for the various ways in which local people engage with, and transform the strategies and effects of state power. Rather than utilising the concept of resistance to make sense of these interactions, a sociology of translation is adopted from the Actor Network Theory literature. Applied to two case examples, it shows how governmental policies and programmes are frequently the outcome of the interactions and negotiations that take place between all those enrolled in the actor-network.

Overweight and obesity in Australia: The 1999-2000 Australian Diabetes, Obesity and Lifestyle Study (AusDiab)

Objective: To measure the prevalence of obesity in Australian adults and to examine the associations of obesity with socioeconomic and lifestyle factors. Design: AusDiab, a cross-sectional study conducted between May 1999 and December 2000, involved participants from 42 randomly selected districts throughout Australia. Participants: Of 20 347 eligible people aged greater than or equal to 25 years who completed a household interview, 11247 attended the physical examination at local survey sites (response rate, 55%). Main outcome measures: Overweight and obesity defined by body mass index (BMI; kg/m(2)) and waist circumference (cm); sociodemographic factors (including smoking, physical activity and television viewing time). Results: The prevalence of overweight and obesity (BMI greater than or equal to 25.0 kg/m(2); waist circumference greater than or equal to 80.0 cm [women] or greater than or equal to 94.0 cm [men]) in both sexes was almost 60%, defined by either BMI or waist circumference. The prevalence of obesity was 2.5 times higher than in 1980. Using waist circumference, the prevalence of obesity was higher in women than men (34.1% v 26.8%; P < 0.01). Lower educational status, higher television viewing time and lower physical activity time were each strongly associated with obesity, with television viewing time showing a stronger relationship than physical activity time. Conclusions: The prevalence of obesity in Australia has more than doubled in the past 20 years. Strong positive associations between obesity and each of television viewing time and lower physical activity time confirm the influence of sedentary lifestyles on obesity, and underline the potential benefits of reducing sedentary behaviour, as well as increasing physical activity, to curb the obesity epidemic.

Integrating environmental and economic life cycle analysis in product development: a material selection case study

Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.