928 resultados para Fluxos de massa


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Many applications require that the plasma discharge is produced apart from the surface to be processed, thus preventing damage caused by bombardment and/or plasma radiation. In the post-discharge regime in various applications thermally sensitive materials can be used. In this work, active species produced by discharge and post-discharge hollow cathode were diagnosed by optical emission spectroscopy and mass spectrometry. The discharge was produced with the gases Ar and Ar - N2 gas flow ranging from 1 to 6 cm3/min and electric current between 150 to 600 mA. It was estimated that the ion density inside the hollow cathode, with 2 mm diameter ranged between 7.71 and 14.1 x 1015 cm-3. It was observed that the gas flow and the electric current changes the emission intensity of Ar and N2 species. The major ionic species detected by quadrupole mass spectrometry were Ar+ and N2+. The ratio of optical emission intensities of N2(1 +)/Ar(811 nm) was related to the partial pressure of N2 after the hollow cathode discharge at low pressure

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The treatment of oil produced water and its implications are continually under investigation and several questions are related to this subject. In the Northeast Region Brazil, the onshore reservoirs are, in its majority, mature oil fields with high production of water. As this oil produced water has high levels of oil, it cannot be directly discarded into the environment because it represents a risk for contamination of soil, water, and groundwater, or even may cause harm to living bodies. Currently, polyelectrolytes that promote the coalescence of the oil droplets are used to remove the dispersed oil phase, enhancing the effectiveness of the flotation process. The non-biodegradability and high cost of polyelectrolytes are limiting factors for its application. On this context, it is necessary to develop studies for the search of more environmentally friendly products to apply in the flotation process. In this work it is proposed the modeling of the flotation process, in a glass column, using surfactants derived from vegetal oils to replace the polyelectrolytes, as well as to obtain a model that represents the experimental data. In addition, it was made a comparative study between the models described in the literature and the one developed in this research. The obtained results showed that the developed model presented high correlation coefficients when fitting the experimental data (R2 > 0.98), thus proving its efficiency in modeling the experimental data.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O uso da massa (g) ou do volume (cm³) como medida da quantidade de solo para determinação do teor de C orgânico do solo (COS), bem como a utilização de diferentes métodos de determinações analíticas empregados para essa mesma finalidade, pode alterar diretamente a interpretação dos resultados. Este trabalho teve como objetivo comparar os métodos colorimétricos e titulométricos de determinação de matéria orgânica em três solos com diferentes texturas, tomando-se as amostras por massa (pesagem) e por volume (cachimbagem). Houve variação no teor de COS entre os métodos estudados para um mesmo solo. O uso da massa e do volume alterou diretamente a interpretação dos teores de matéria orgânica no solo. Há variações nos métodos de determinação de COS entre solos de diferentes texturas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The final display of sewage sludge has been characterized as one of the most relevant environmental problems in the cities; it daily increases in both developed and developing countries, resulting in larger collection networks and increased treatment levels. The aim of this study was to verify the effect of mineral N and sewage sludge on dry matter yield and C/N ratio in black oat. The experiment was conducted in Sao Manuel Experimental Farm, belonging to the Faculty Agronomic Sciences, Unesp, Botucatu. The adopted experimental design was in randomized blocks constituted of 6 treatments and 5 replicates, as follows: T0 - without nitrogen fertilization; T1 - 70 kg ha(-1) of the N mineral; T2 - 35 kg ha(-1) of the N from sewage sludge and 35 kg ha(-1) of the N in the mineral form; T3 - 70 kg ha(-1) of the N from sewage sludge; T4 - 105 kg ha(-1) of the N from sewage sludge;- T5 - 140 kg ha(-1) of the N from sewage sludge. The parameters evaluated were dry matter acumulation and C/N ratio; with collections made at 60, 75, 90, 105 and 120 days after sowing. Increasing the dose of sewage sludge provided increment in dry matter yield in oat. The N provided a lawoer C/N ratio in plant oats.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Metabolic flux analysis (MFA) is a powerful tool for analyzing cellular metabolism. In order to control the growth conditions of a specific organism, it is important to have a complete understanding of its MFA. This would allowed us to improve the processes for obtaining products of interest to human and also to understand how to manipulate the genome of a cell, allowing optimization process for genetic engineering. Streptomyces olindensis ICB20 is a promising producer of the antibiotic cosmomycin, a powerful antitumor drug. Several Brazilian researchers groups have been developing studies in order to optimize cosmomycin production in bioreactors. However, to the best of our knowledge, nothing has been done on metabolic fluxes analysis field. Therefore, the aim of this work is to identify several factors that can affect the metabolism of Streptomyces olindensis ICB20, through the metabolic flux analysis. As a result, the production of the secondary metabolite, cosmomycin, can be increased. To achieve this goal, a metabolic model was developed which simulates a distribution of internal cellular fluxes based on the knowledge of metabolic pathways, its interconnections, as well as the constraints of microorganism under study. The validity of the proposed model was verified by comparing the computational data obtained by the model with the experimental data obtained from the literature. Based on the analysis of intracellular fluxes, obtained by the model, an optimal culture medium was proposed. In addition, some key points of the metabolism of Streptomyces olindensis were identified, aiming to direct its metabolism to a greater cosmomycin production. In this sense it was found that by increasing the concentration of yeast extract, the culture medium could be optimized. Furthermore, the inhibition of the biosynthesis of fatty acids was found to be a interesting strategy for genetic manipulation. Based on the metabolic model, one of the optimized medium conditions was experimentally tested in order to demonstrate in vitro what was obtained in silico. It was found that by increasing the concentration of yeast extract in the culture medium would induce to an increase of the cosmomycin production

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The disposal of sewage sludge is a growing problem face up to management of sanitary sevices. Otherwise, because its making process characteristic, the Ceramic Industry can tolerate the presence of this wastes as raw material. This study has as object to confirm the use of the sewage sluge in the Ceramic Industry like a sustentable alternative for its disposal. Futhermore, this study quests to evaluate the maximum proportion for incorporation of sludge wich result in technically and enviromentally suitable bricks. For found this proportion, the research consisted of (1) making of bricks in full scale, adde up 0%, 5%,10%, 15%, 20%, 25%,30%, 35% e 40% sludge, with size 220x105x45 mm, hand-molded by rammer and baked by industrial kiln; and (2) tecnical and enviromental evaluation of this bricks, according to Brazilian norms. The raw material uses were two distinct clays come from Goianinha/RN and sewage comes from a septic system tank and pumped into tank vehicle, of Natal/RN. The technical evaluation allowed to conclude the addiotion of the sludge brings about signifcant lost of mass and the water absorption grew up according to increase of sludge: every sludge-amended clay bricks absorved more water than control group. Thus, the compressive strength was signicantly decreased because the increase of sludge: bricks with 5% sludge added lost 45% of strength achieved at control group; the bricks made with 10 and 20% lost almost 70% of bigger strength. With up to 25% sludge added to the bricks, the streght decreased over 90%. Concerning heavy metal leaching, the two maximum proportion wich have tecnical approval, it means bricks sludge added with 15 and 20%, can say there is no risk of enviromental contamination using those bricks. This way, in this work context, it can to conclude the maximum proportion atends the technical and enviromental criterion is 20%

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Sludge of Wastewater Treatment Plants (WTPs) disposal is a problem for any municipality, for this reason the amount of sludge production is now a key issue in selecting treatment methods. It is necessary to investigate new applications for this waste type, due to the restrictions imposed by the environmental organs. The raw materials used in the Red Ceramic, are generally very heterogeneous, for this reason, such materials can tolerate the presence of different types of wastes. In Rio Grande do Norte, the roof tiles production corresponds to 60,61% from the total of ceramic units produced. Due to the importance of the ceramic industry of roof tiles for the state, allied to the environmental problem of the sludge disposal, this work had for objective to verify the possibility of the incorporation of sewage sludge in ceramic body used for production of roof tiles. In the research, sludge originating from drying beds of WTP of the Central Campus from UFRN and clays originating from a ceramic industry from Goianinha/RN were used. The raw materials were characterized by techniques of: analysis of particles distribution by diffraction to laser; real density; consistence limits; chemical analysis by X-ray fluorescence; mineralogical analysis by X-ray diffraction; organic matter; and solids content. Five batches of roof tiles were manufactured in the approximate dosages of 2%, 4%, 6%, 8% and 10%. To evaluate the properties of each final product, tests of water absorption, impermeability, bending strength, leachability and solubility were accomplished. The roof tiles manufactured with sludge presented characteristics similar to the roof tiles without sludge in relation to the environmental risk. The results showed that it is possible to use approximately up to 4% of sludge in ceramic bodies for production of roof tiles. However, it is observed that the high amount of organic matter (71%) present in the sludge is shown as factor that limits the sludge incorporation in ceramic bodies, worsening the quality of the roof tiles. It is necessary the use of mixtures of different raw materials under point of view of the granulometry and of the other chemical and mineralogical properties for the obtaining of a satisfactory mass to the production of ceramic roof tiles

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este artigo analisa algumas das diferentes implicações do fluxo migratório nos principais países fornecedores de contingentes, durante o período conhecido como new emigration: Itália, Espanha e Portugal. Considerando suas especificidades, o objetivo é identificar as estratégias de cada um para transformar esse movimento em fator de desenvolvimento econômico: conquista de mercados, criação e fomento de colônias, incorporação e tutela das remessas dos emigrados. Reino em formação e maior fonte de emigrantes, a Itália seguiu naturalmente os caminhos que identificavam a emigração como um dos agentes de prosperidade da nação, contrastando com Portugal e Espanha.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

n this work, we analyze the behavior of the chromospheric and coronal activities as a function of the mass and the orbital period of extrasolar planets which were detected by transit technique. So we look for possible effects of the planet on the star s chromosphere and corona. For this study we selected a sample of 48 stars with chromospheric activity indicator and 23 with coronal activity indicator. Our work is based on the work from Pont et al. (2011) in order to study stars with planets which were obtained by transit technique. Furthermore, we studied the relationship between planetary mass and orbital period with the chromospheric and coronal activity in order to better understand which influences the planets cause in the outer layers of stellar atmosphere. In our analysis we can observe that the mass of the planets exerts no influence in the stellar activity. However, we observed that the stellar coronal and chromospheric activities decrease with the increase of the orbital period of the planet

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work, we analyze the behavior of the chromospheric and coronal activities as a function of the mass and the orbital period of extrasolar planets which were detected by transit technique. So we look for possible effects of the planet on the star s chromosphere and corona. For this study we selected a sample of 48 stars with chromospheric activity indicator and 23 with coronal activity indicator. Our work is based on the work from Pont et al. (2011) in order to study stars with planets which were obtained by transit technique. Furthermore, we studied the relationship between planetary mass and orbital period with the chromospheric and coronal activity in order to better understand which influences the planets cause in the outer layers of stellar atmosphere. In our analysis we can observe that the mass of the planets exerts no influence in the stellar activity. However, we observed that the stellar coronal and chromospheric activities decrease with the increase of the orbital period of the planet

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this research, characterized as a qualitative study, we aimed to analyze the Job Profiles, Objectives and Curriculum Flows specified in Pedagogical Projects of the undergraduate Courses of Physical Education of public, state and federal universities, in the São Paulo state. We also analyzed their articulations and adequacy to the Institutional Pedagogical Project and Institutional Development Plan. The latest Resolutions of Physical Education in Higher Education and conceptualizations of the Pedagogical Project of Course are presented. The method of approach is current History. There was a documental research in order to analyze the official documents. A limited offering of public courses when compared to private institutions was verified and also, there was a greater offering of bachelor degree courses (expanded and generalized formation) concerning health, sport and leisure fields. Courses defined specifically for teachers' formation and educational gap between the pedagogical discourses and the curriculum structures were also presented. In conclusion, this research indicates the necessity of a change in the curricular mentality in order to implement the pedagogical discourses of courses.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objetivou-se avaliar as produtividades de grãos de milho e massa seca de braquiárias em duas modalidades de consórcio em sistema de integração lavoura-pecuária no período de inverno-primavera em região do Cerrado. O experimento foi conduzido no ano de 2006, na Fazenda de Ensino, Pesquisa e Extensão (FEPE), pertencente à Faculdade de Engenharia (FE/UNESP - Campus de Ilha Solteira), localizada no município de Selvíria, MS. O delineamento experimental utilizado foi de blocos casualizados, em esquema fatorial 4x2, com cinco repetições. Os tratamentos constituíram-se de quatro espécies de braquiárias (Brachiaria brizantha cv. 'Marandu', Brachiaria decumbens, Brachiaria ruziziensis e Brachiaria híbrido cv. 'Mulato II') consorciadas na linha e a lanço no momento da semeadura do milho. Avaliaram-se os componentes da produção, a produtividade do milho, bem como a massa seca das braquiárias após a colheita do milho. As forrageiras consorciadas a lanço, com destaque para a Brachiaria ruziziensis proporcionaram menor desenvolvimento das plantas de milho e menores valores dos componentes da produção, bem como da produtividade de grãos. Apesar de satisfatórias produtividades de massa seca (acima de 2.500kg ha-1), com exceção da Brachiaria brizantha, as demais espécies consorciadas a lanço foram superiores, com destaque para a Brachiaria decumbens e a Brachiaria ruziziensis que apresentaram maior adaptabilidade e produtividade de forragem no consórcio com milho em sistema de integração lavoura-pecuária.