Biosynthesis, detection and toxicology of ochratoxins - optimisation of production

Ochratoxin A (OTA) is a very well known mycotoxin found in several food commodities for which maximum limits are being discussed in EC in other to produce appropriate regulations. OTA is one of several ochratoxins produced by Aspergillus and Penicillium species. All the compounds in this group have a molecular structure very similar to OTA and some were already isolated from natural substrates. Several of these compounds such as ochratoxin , methyl and ethyl ester of ochratoxin A, 4-R and S-hydroxyochratoxin A, 10-hydroxyochratoxin A and ochratoxin A open lactone are commercially unavailable. However, they can be easily synthesized through OTA modification. With the main objective of its application on further research works, OTA production, isolation and purification has been optimised from an A. alliaceus strain grown on wheat medium. Synthesis and purification of some OTA derivatives has been achieved and an HPLC method for their detection was optimised. Data about their production by several species of Aspergillus will be presented. The toxicological properties of ochratoxins are still not very clear and a future EC safety limit for OTA will depend on e.g., a better clarification of its carcinogenity. Could OTA derivatives play a role here?

Hypertension in a female nursing staff-pattern of occurrence, diagnosis, and treatment

OBJECTIVE: To report the pattern of occurrence, diagnosis, and treatment of hypertension in a female nursing staff of an emergency hospital. METHODS: We carried out a cross-sectional study that included interviews and blood pressure measurements of 494 nursing professionals at an emergency hospital in the city of Salvador, in the state of Bahia, Brazil. We considered hypertensive all individual with blood pressure > or = 140/90 mmHg or normal pressure if on regular treatment. RESULTS: We found a prevalence of hypertension of 36.4%. Only 18.3% of the individuals ignored their hypertensive condition, and 64.2% admitted not being having regular treatment. Of those individuals who were having treatment, 69.4% had elevated blood pressure on examination. The major reasons for not being on treatment was the occasional elevation of blood pressure (22.2%) and medical counseling (20.0%). CONCLUSION: The results point to the need to introduce hypertension control measures in this occupational group, because of the magnitude of the disease and the potential impact on diffusion of knowledge and measures to control hypertension.

The Botanical magazine, or, Flower-garden displayed ... /by William Curtis.

v.1-2=no.1-71 (1787-1790) [Lacks:no.27]

The Botanical magazine, or, Flower-garden displayed ... /by William Curtis.

v.11-12=no.361-432 (1797-1798)

The Botanical magazine, or, Flower-garden displayed ... /by William Curtis.

v.13-14=no.433-504 (1799-1800)

The Botanical magazine, or, Flower-garden displayed ... /by William Curtis.

v.3-4:no.73-144 (1790-1791)

The Botanical magazine, or, Flower-garden displayed ... /by William Curtis.

v.5-6=no.145-216 (1792-1793)

The Botanical magazine, or, Flower-garden displayed ... /by William Curtis.

v.7-8=no.217-288 (1794)

The Botanical magazine, or, Flower-garden displayed ... /by William Curtis.

v.9-10=no.289-360 (1795-1796)

Evolución floral mediada por polinizadores. Evidencias a escala poblacional, interpoblacional e interespecífica. Pollinator mediated flower evolution at population, interpopulation and interspecific perspectives.

Identificación y caracterización del problema: El fenotipo floral puede explicarse como respuesta adaptativa a los polinizadores. Sin embargo, está también influido por otros procesos como aislamiento geográfico, contexto histórico, efectos ambientales así como limitaciones filogenéticas y de desarrollo. Aunque las presiones selectivas ejercidas por un grupo funcional de polinizadores es supuestamente una característica prevalente que subyace a la evolución floral y especiación en los estudios de la biología evolutiva de las flores, la evidencia sobre importancia de los polinizadores como fuerzas moldeadoras del fenotipo floral es escasa y equívoca. Hipótesis Los patrones de variación de caracteres florales relacionados al ajuste flor-polinizador son explicados por la selección contemporánea y pasada ejercida por los polinizadores más eficientes. Objetivos: Estudiar la influencia de los polinizadores y de otros procesos como aislamiento geográfico, contexto histórico, efectos ambientales así como limitaciones filogenéticas y de desarrollo, como fuerzas moldeadoras del fenotipo floral dentro y entre poblaciones de una misma especie, así como entre especies diferentes. Materiales y métodos: Se encarará el estudio de sistemas plantas-polinizador sobre cuyo funcionamiento tenemos conocimientos previos y resultados publicados con aproximaciones que resultaron exitosas en otros estudios realizados por nosotros o con aproximaciones que son novedosas en los estudios de estos sistemas. Se integrarán aproximaciones de morfometría clásica y geométrica, de análisis filogenético y filogeográfico, análisis de contrastes independientes, de modelado predictivo de nicho, de selección e integración fenotípica en distintas especies o grupos de especies. Resultados esperados Los estudios de selección fenotípica deberán servir para demostrar si caracteres claves en el ajuste flor-polinizador son contemporáneamente blanco de la selección natural, si similar selección pasada ha dejado su impronta en la estructura de covariación (integración) y si esos caracteres son heredables. A nivel inter-poblacional, se espera demostrar que esta variación geográfica en atributos florales está relacionada con el ensamble de polinizadores cambiantes, y que esta variación se reflejada en la estructura genética geográfica, y que distintos escenarios selectivos (históricos y ecológicos como distintos ensambles de polinizadores) tienen consecuencias en los patrones de selección contemporánea (selección fenotípica) o pasada (integración). A nivel inter-específico, sobre estos antecedentes se plantean dos posibles situaciones de estudio en especies de plantas filogenéticamente hermanas que conviven y que ya sea, que comparten la misma especie de abeja polinizadora o que presentan dos sistemas de polinización contrastantes (aves o abejas) y forman una zona híbrida. Importancia del proyecto: Poder responder preguntas relevantes sobre biología evolutiva tomando como modelo al efecto selectivo de polinizadores sobre distintas especie de plantas nativas del Córdoba y otras regiones del país. Por otro lado, el conocimiento de los sistemas planta/polinizador impacta sobre la conservación de interacciones, el sustento de la biodiversidad. Esto contribuiría a la elaboración de protocolos de conservación de especies nativas del país.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

SQL based frequent pattern mining

Data mining, frequent pattern mining, database mining, mining algorithms in SQL