Comparative study of the performance of the M-cycle counter-flow and cross-flow heat exchangers for indirect evaporative cooling - paving the path towards sustainable cooling of buildings

This paper provides a comparative study of the performance of cross-flow and counter-flow M-cycle heat exchangers for dew point cooling. It is recognised that evaporative cooling systems offer a low energy alternative to conventional air conditioning units. Recently emerged dew point cooling, as the renovated evaporative cooling configuration, is claimed to have much higher cooling output over the conventional evaporative modes owing to use of the M-cycle heat exchangers. Cross-flow and counter-flow heat exchangers, as the available structures for M-cycle dew point cooling processing, were theoretically and experimentally investigated to identify the difference in cooling effectiveness of both under the parallel structural/operational conditions, optimise the geometrical sizes of the exchangers and suggest their favourite operational conditions. Through development of a dedicated computer model and case-by-case experimental testing and validation, a parametric study of the cooling performance of the counter-flow and cross-flow heat exchangers was carried out. The results showed the counter-flow exchanger offered greater (around 20% higher) cooling capacity, as well as greater (15%–23% higher) dew-point and wet-bulb effectiveness when equal in physical size and under the same operating conditions. The cross-flow system, however, had a greater (10% higher) Energy Efficiency (COP). As the increased cooling effectiveness will lead to reduced air volume flow rate, smaller system size and lower cost, whilst the size and cost are the inherent barriers for use of dew point cooling as the alternation of the conventional cooling systems, the counter-flow system is considered to offer practical advantages over the cross-flow system that would aid the uptake of this low energy cooling alternative. In line with increased global demand for energy in cooling of building, largely by economic booming of emerging developing nations and recognised global warming, the research results will be of significant importance in terms of promoting deployment of the low energy dew point cooling system, helping reduction of energy use in cooling of buildings and cut of the associated carbon emission.

A model of the dynamic relationship between blood flow and volume changes during brain activation

The temporal relationship between changes in cerebral blood flow (CBF) and cerebral blood volume (CBV) is important in the biophysical modeling and interpretation of the hemodynamic response to activation, particularly in the context of magnetic resonance imaging and the blood oxygen level-dependent signal. Grubb et al. (1974) measured the steady state relationship between changes in CBV and CBF after hypercapnic challenge. The relationship CBV proportional to CBFPhi has been used extensively in the literature. Two similar models, the Balloon (Buxton et al., 1998) and the Windkessel (Mandeville et al., 1999), have been proposed to describe the temporal dynamics of changes in CBV with respect to changes in CBF. In this study, a dynamic model extending the Windkessel model by incorporating delayed compliance is presented. The extended model is better able to capture the dynamics of CBV changes after changes in CBF, particularly in the return-to-baseline stages of the response.

An experimental comparison between rival theories of rapid automatized naming performance and its relationship to reading

Two studies investigated the degree to which the relationship between Rapid Automatized Naming (RAN) performance and reading development is driven by shared phonological processes. Study 1 assessed RAN, phonological awareness and reading performance in 1010 children aged 7-10 years. Results showed that RAN deficits occurred in the absence of phonological awareness deficits. These were accompanied by modest reading delays. In structural equation modeling, solutions where RAN was subsumed within a phonological processing factor did not provide a good fit to the data, suggesting that processes outside phonology may drive RAN performance and its association with reading. Study 2 investigated Kail's (1991) proposal that speed of processing underlies this relationship. Children with single RAN deficits showed slower speed of processing than closely matched controls performing normally on RAN. However, regression analysis revealed that RAN made a unique contribution to reading even after accounting for processing speed. Theoretical implications are discussed.

Relationship of dayside auroral precipitations to the open-closed separatrix and the pattern of convective flow

The implications are discussed of acceleration of magnetospheric ions by reflection off two magnetopause Alfvén waves, launched by the reconnection site into the inflow regions on both sides of the boundary. The effects of these waves on the ion populations, predicted using the model described by Lockwood et al. [1996], offer a physical interpretation of all the various widely used classifications of precipitation into the dayside ionosphere, namely, central plasma sheet, dayside boundary plasma sheet (BPS), void, low-latitude boundary layer (LLBL), cusp, mantle, and polar cap. The location of the open-closed boundary and the form of the convection flow pattern are discussed in relation to the regions in which these various precipitations are typically found. Specifically, the model predicts that both the LLBL and the dayside BPS precipitations are on newly opened field lines and places the convection reversal within the LLBL, as is often observed. It is shown that this offers solutions to a number of paradoxes and problems that arise if the LLBL and BPS precipitations are thought of as being on closed field lines. This model is also used to make quantitive predictions of the longitudinal extent and latitudinal width of the cusp, as a function of solar wind density.

Are defaults a family affair?: the relationship between kinship and microloan performance

A partir de uma grande base de dados fornecida por uma instituição de microcrédito do nordeste brasileiro, a relação entre parentesco e inadimplência é analisada. O presente trabalho mostra evidências de que o parentesco entre membros de um grupo solidário afeta positivamente a adimplência. Grupos em que todos os membros possuíam algum laço de parentesco entre si apresentaram uma probabilidade 24% menor de inadimplência do que grupo sem esses laços. Além disso, quando considerado apenas o primeiro empréstimo, grupos com 100% de parentesco entre os membros apresentaram uma probabilidade 45% menor de inadimplência em comparação com membros sem relações de parentesco. Os resultados deste trabalho também mostram que há uma relação negativa entre parentesco e probabilidade de mudança na formação de um grupo solidário. Essas análises permitem fazer inferências acerca dos mecanismos pelos quais o parentesco afeta o desempenho do microcrédito. Os resultados sugerem que o parentesco possui um benefício maior no processo de autosseleção do grupo. Além disso, os resultados também sugerem que o impacto positivo do parentesco nas atividades de automonitoramento compensa o enfraquecimento das atividades de enforcement.

The relationship between board of director's nationality diversity and financial performance

Companies are moving to a more international structure; going into new markets and having an increased competition in all fronts. Therefore, the practices that lead companies to a more efficient and competitive position are praised. The management of the workforce comes as one of the main concerns of companies, aiming at performance enhancing and at creating better environments that both attract and maintain the professional talents. In an increasingly international environment, companies tend to look for the specialists and best professionals, regardless of their nationality. This new structure with several different nationalities working together poses new challenges for companies. Understanding if and how a more diverse has a relationship with financial performance is the starting point for better managing this new corporate structure.

Assessing the performance of private equity investments

This study presents an alternative investment projection model to estimate the future values of Private Equity (PE) investments. The performance of PE investments is assessed by analyzing the risk-return relationship relative to simulated Public Market (PM) investments that mimic the cash flow patterns of PE investments. The model allows for a quantified analysis of the underlying inputs that outline the PE performance and risks, and accounts for survivorship bias. These inputs include the fund manager’s decisions regarding the selection, leverage, size, duration and timing of investment and divestments.

Franchisor-franchisee relationship and performance: influence of personality traits, entrepreneurial drive, and time of relationship

A literatura em franchising tem virtualmente ignorado o papel de aspectos psicologicos nos resultados interorganizacionais das empresas, a despeito de sua influencia nos resultados das organizações e da qualidade de relacionamento. Este estudo, portanto, tem por objetivo analisar a influência da personalidade e do potencial empreendedor na qualidade de relacionamento e desempenho financeiro na relação franqueador-franqueado, ao longo do tempo, sob a perspectiva dos franqueados. Este estudo analisa também o papel do tempo de relacionamento sobre a qualidade de relacionamento e o desempenho financeiro. Foi utilizado neste estudo um questionário de auto-preenchimento, enviado por e-mail, com o objetivo de recolher dados de uma amostra de 342 franqueados de 3 redes de franquias. A personalidade foi mensurada por meio dos “Cinco Grandes” traços de personalidade (escalas IPIP-B5): extroversão, agradabilidade, consciencia, estabilidade emocional e imaginação. O potencial empreendedor foi mensurado por meio do índice CEI (Carland Entrepreneurship Index). A qualidade do relacionamento foi estruturada como um constructo de segunda ordem, composto por 23 itens (incorporando confiança, comprometimento e satisfação com o relacionamento), e o desempenho financeiro foi representado por meio de uma escala de mensuração de crescimento de vendas e de rentabilidade. O tempo de relacionamento foi medido por meio dos meses de relacionamento entre franqueado e franqueador. As hipoteses foram testadas por meio de modelagem por equações estruturais, com a utilização do método de mínimos quadrados parciais (PLS), análise de regressão e análise de médias. Três das cinco dimensões da personalidade apresentaram o efeito previsto sobre as variáveis qualidade do relacionamento – agradabilidade (positivamente), estabilidade emocional (positivamente), e imaginação (positivamente). O desempenho financeiro foi influenciado, como previsto por consciência (positivamente), estabilidade emocional (positivamente), e imaginação (positivamente). Como esperado, a qualidade do relacionamento apresentou efeito positivo e significativo em relação ao desempenho financeiro. O potencial empreendedor apresentou o efeito positivo previsto apenas sobre desempenho. O tempo de relacionamento teve o efeito positivo esperado sobre o relacionamento franqueador-franqueado, em relação à qualidade do relacionamento e o desempenho financeiro, mas as diferenças entre as fases de relacionamento propostas foram apenas parcialmente confirmadas, uma vez que em somente duas fases (rotina e estabilização) a análise de médias mostrou diferenças significativas. Os resultados indicam que a personalidade influencia a qualidade de relacionamento e o desempenho, mas a meneira pela qual isso ocorre é diferente no contexto brasileiro, onde esta pesquisa foi realizada, dos achados da pesquisa conduzida na Austrália, sugerindo que fatores como cultura e estabilidade de mercado podem ter influencia sobre a relação entre traços de personalidade e qualidade de relacionamento, e traços de personalidade e desempenho financeiro. O potencial empreendedor parece influenciar positivamente o desempenho do franqueado, mas a sua influência não foi significativa em relação à qualidade do relacionamento. Os resultados também indicam a importância do tempo no desenvolvimento da qualidade de relacionamento e desempenho. Além disso, os relacionamentos de longo prazo estão relacionados a melhores avaliações de qualidade de relacionamento e desempenho financeiros por parte dos franqueados. As limitações do trabalho e sugestões para estudos futuros também são discutidos.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part II. Performance evaluation

The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.

Thermal performance of multipass parallel and counter-cross-flow heat exchangers

A thorough study of the thermal performance of multipass parallel cross-flow and counter-cross-flow heat exchangers has been carried out by applying a new numerical procedure. According to this procedure, the heat exchanger is discretized into small elements following the tube-side fluid circuits. Each element is itself a one-pass mixed-unmixed cross-flow heat exchanger. Simulated results have been validated through comparisons to results from analytical solutions for one- to four-pass, parallel cross-flow and counter-cross-flow arrangements. Very accurate results have been obtained over wide ranges of NTU (number of transfer units) and C* (heat capacity rate ratio) values. New effectiveness data for the aforementioned configurations and a higher number of tube passes is presented along with data for a complex flow configuration proposed elsewhere. The proposed procedure constitutes a useful research tool both for theoretical and experimental studies of cross-flow heat exchangers thermal performance.

A new approach for thermal performance calculation of cross-flow heat exchangers

A new numerical methodology for thermal performance calculation in cross-flow heat exchangers is developed. Effectiveness-number of transfer units (epsilon-NTU) data for several standard and complex flow arrangements are obtained using this methodology. The results are validated through comparison with analytical solutions for one-pass cross-flow heat exchangers with one to four rows and with approximate series solution for an unmixed-unmixed heat exchanger, obtaining in all cases very small errors. New effectiveness data for some complex configurations are provided. (c) 2005 Elsevier Ltd. All rights reserved.

Study of alternative schemes for the parameterization step of the continuation power flow method based on physical parameters, part II: Performance evaluation

New parameterization schemes have been proposed by the authors in Part I of this paper. In this part these new options for the parameterization of power flow equations are tested, namely, the total power losses (real and reactive), the power at the slack bus (real or reactive), the reactive power at generation buses, and the transmission line power losses (real and reactive). These different parameterization schemes can be used to obtain the maximum loading point without ill-conditioning problems, once the singularity of Jacobian matrix is avoided. The results obtained with the new approach for the IEEE test systems (14, 30, 57, and 118 buses) show that the characteristics of the conventional method are not only preserved but also improved. In addition, it is shown that the proposed method and the conventional one can be switched during the tracing of PV curves to determine, with few iterations, all points of the PV curve. Several tests were also carried out to compare the performance of the proposed parameterization schemes for the continuation power flow method with the use of both the secant and tangent predictors.

Linear relationship between potential and concentration in flow potentiometry

In potentiometric-flow systems, linear-potential responses for logarithmic concentrations can be attained for first-(or pseudo-first-) order reactions in which the monitored chemical species react with the analyte during a fixed time interval. To demonstrate this property, the determination of glycerol based on its oxidation by periodate and potentiometric monitoring of the remaining periodate was selected. Influence of reagent concentration and timing on the linearity of the analytical curve were investigated. A mathematical treatment was derived, and potentialities/limitations of the approach were outlined. The system was applied to analysis of soap and lixivia samples. The analytical curve within 200 and 2000 mg L-1 (r = 0.99975; n = 5) was described as E = 8.166 + 0.0478 (glycerol). The sample throughput was 100 h(-1), and a measurement repeatability within 0.5 mV was always observed. By applying a t-test, there was no statistical difference between the results obtained by the proposed procedure and by iodimetric titration at the 95% confidence level. (C) 2000 John Wiley & Sons, Inc. Lab Robotics and Automation 12:41-45, 2000.

Impact of Z-R relationship on flow estimates in central São Paulo

Mean areal radar rainfall over catchments in the State of São Paulo is an operational product under development by the Meteorological Research Institute - IPMet. A pilot project is being carried out which focuses on the important Corumbatai River basin, under surveillance by the IPMet-operated Bauru radar. Previous work on the project explored the relative impact of factors like time resolution of radar data and reflectivity to rain-rate conversion relationships, when the relevance of the latter was verified. This paper deals with the stratification of those relationships by daily intervals and its impact on flow estimates. Daily values of radar mean rainfall using gauges and different conversion relationships are plotted against the corresponding flow at the basin outlet. Flow estimates derived by applying the rainfall from the different relationships to a previously obtained rainfall-runoff curve for the basin is compared to the historical hydrograph. Preliminary results suggest stratification has hydrological significance.