War crimes, conditionality and EU integration in the Western Balkans

The baleful legacy of the wars of the 1990s continues to dog the states and societies of the former Yugoslavia and has overshadowed the disappointingly slow and hesitant trajectory of the region towards the EU. At the start of the new millennium, with the removal of key wartime leaders from the political scene in both Croatia and Serbia, it was widely hoped that the region would prove able to ‘leave the past behind’ and rapidly move on to the hopeful new agenda of EU integration. The EU’s Copenhagen criteria, which in 1993 first explicitly set out the basic political conditions expected of aspirant EU Member States, proved effective in the case of the new democracies of Central and Eastern Europe in supporting the entrenchment of democratic norms and practices, and stimulating reconciliation and good neighbourly relations among countries with turbulent histories. Building on this experience, the Stabilisation and Association Process, launched for the countries of the Western Balkans in 1999, included both full cooperation with the International Criminal Tribunal for the former Yugoslavia (ICTY) and regional reconciliation among the political conditions set for advancing these countries on the path to EU integration. EU political conditionality was intended to support the efforts of new political leaders to redefine national goals away from the nationalist enmities of the past and focus firmly on forging a path to a better future. This Chaillot Paper examines the extent to which this strategy has worked, especially in the light of the difficulties it has encountered in the face of strong resistance to cooperation among sections of the former Yugoslav population, many of whom have not yet fully acknowledged the crimes committed during the 1990s. Key chapters in the volume raise the vital questions of leadership and political will. EU political conditionality does not work unless the EU has a partner ready and willing to ‘play the game’, which presupposes that EU integration has become the overriding priority on the national political agenda.

The relationship between fracture toughness and microstructure in titanium alloys

Linear Elastic Fracture Mechanics has been used to study the microstructural factors controlling the strength and toughness of two alpha-beta, titanium alloys. Fracture toughness was found to be independent of orientation for alloy Ti/6A1/4-V, but orientation dependent for IMI 700, bend and tension specimens giving similar toughness values. Increasing the solution temperature led to the usual inverse relationship between strength and toughness, with toughness becoming a minimum as the beta transus was approached. The production of a double heat treated microstructure led to a 100% increase in toughness in the high strength alloy and a 20% increase in alloy Ti/6A1/4V, with little decrease in strength. The double heat treated microstruoture was produced by cooling from the beta field into the alpha beta field, followed. by conventional solution treatment and ageing. Forging above the beta transus led to an increase in toughness over alpha beta forging in the high strength alloy, but had little effect on the toughness of Ti/6A1/4V. Light and electron microscopy showed that the increased toughness resulted from the alpha phase being changed from mainly continuous to a discontinuous platelet form in a transformed beta matrix. Void formation occurred at the alpha-beta interface and crack propagation was via the interface or across the platelet depending on which process required the least energy. Varying the solution treatment temperature produced a varying interplatelet spacing and platelet thickness. The finest interplatelet spacing was associated with the highest toughness, since a higher applied stress was required to give the necessary stress concentration to initiate void formation. The thickest alpha platelet size gave the highest toughness which could be interpreted in terms of Krafftt's "process zone size" and the critical crack tip displacement criterion by Hahn and Rosenfield from an analysis by Goodier and Field.

Application of wear resistant coatings by the brush plating technique

The development of cobalt molybdenum and cobalt tungsten brush plating electrolytes is described. Their optimum compositions and operating conditions for commercial applications have been determined. The effects of composition, pH, applied voltage, stylus speed and pressure upon deposit composition and efficiency have been investigated. Transmission and Scanning Electron Microscopy have been employed to study the cobalt alloy deposits produced. Evaluation of the wear resistant properties of the cobalt alloys developed in this work was carried out in the laboratory using a pin and disc technique and a simulated hot forging test, and by industrial trials involving the "on site" plating of hot forging dies and cold pressing tools. It was concluded that the electrolytes developed in tl1is work enabled cobalt alloys containing 6% Mo or 8% W to be deposited at 17-20V. Brush plated cobalt deposits possessed a mixed CPU and FCC crystallographic structure at room temperature. The application of 13µm of either of the cobalt alloys resulted in improved wear performance in both pin and disc and simulated hot forging tests. The results of the industrial trials indicated that by the use of these alloys, the life of hot forging dies may be increased by 20-100%. A commercial forging organisation is using electrolytes developed in this work to coat dies prior to forging nimonic alloys. Reductions in forging temperature and improved forging qualities have been reported. Cold pressing tools coated with the alloys showed a reduced tendency to "pick-up" and scoring of the pressed panels. Reports of a reduced need for lubrication of panels before pressing have also been received.

Study of the deposition, properties and applications of electroless deposits containing particles

The deposition efficiencies of a number of electroless nickel and cobalt plating solutions were studied and in the case of nickel compared with a commercial plating solution Nifoss 80. At the optimum plating conditions (92ºC and pH 4.5) Nifoss 80 produced nickel layers most efficiently, the alkaline cobalt solution operated most efficiently at 90ºC and pH 9. The methods of producing compostte layers containing 2-3 µm carbide particles and chromium powder is described. Nickel and cobalt layers containing approximately 27% carbide particles, or 40% (Ni) and 30% (Co) chromium particles by volume were obtained. This value is independent of the particle concentration in the plating solution within the range (20~200 g/l). Hardness of the nickel. as deposited was 515 Hv, this was increased to a maximum of 1155 Hv by heat treatment at 200ºC for 5 hours in vacuum. Incorporation. of .chromium carbide particles resulted in a maximum hardness of 1225 Hv after heating at 500ºC for 5 hours in vacuum and chromium particles resulted in a maximum hardness of 16S0 Hv after heat treatment at 400ºC for 2 hours in vacuum. Similarly the hardness of cobalt as deposited was 600 Hv, this was increased to a maximum of 1300 Hv after heat treatment at 400ºC for 1 hour. Incorporation of chromium carbide particles resulted jn a maximum hardness of 1405 Hv after heating at 400ºC for 5 hours in vacuum and chromium particles resulted in a maximum hardness of 1440 Hv after. heat treating for 2 hours at 400ºC in vacuum. The structure of the deposits was studied by optical and scanning electron microscopy. The wear rate and coefficient of friction was determined by a pin and disc method. Wear rate and coefficient of friction decreased with increase in hardness. The wear resistance of the materials was also determined using a simulated forging test. Dies made of standard die steel were coated and the wear rates of the layers as deposited and after heat treatment were compared with those of uncoated tools. The wear resistance generally increased with hardness, it was 50-75% more than the uncoated die steel. Acetic acid salt spray test and outdoor exposure for six months was used to study the corrosion behaviour of the deposits and potentiodynamic curves plotted to find their corrosion potential. Nickel deposit exhibited less staining than carbide composite deposits and nickel-chromium deposits had the most noble corrosion potential.

Fracture toughness of some high density PM steels

Tensile strengths, impact energies, and fracture toughness data are presented for pure Fe-0.5 C, Astaloy A with 0.2 and 0.6%C, and for Distaloy AB-0.6%C at relative densities of about 0.9, achieved by conventional pressing and sintering, and at close to 1.0, achieved by powder forging. At low relative density, properties are controlled by sizes of sinter necks; it is postulated that toughness scales as (x/a)4, x/a being the ratio of neck diameter to particle diameter. At high relative density, microvoid coalescence and good toughness is observed for low strength microstructures whereas cleavage and poor toughness is a concomitant of high strength.

Guest editorial

Full text: With the rapid development of the aerospace industry, manufacturing technologies have to continuously develop and adjust themselves to ever-growing demands coming from more complex component designs and the use of highly engineered materials. Today there is an increased number of manufacturers contributing to the realization of final products, i.e. avionics, so it is easy to perceive the truly globalized dimension of the aerospace manufacturing business. With this comes the demand for further engineering developments on which the academic/industrial research institutes need to deliver solutions to real aerospace manufacturing problems. This is a challenging task since aerospace manufacturing technologies have to cover a wide range of materials (from composites to advanced Ni/Ti alloys), processes (from forging to non-traditional machining and assembly), and parts’ dimensions/batch sizes (from airframes to turbine blades). In this wide context, this Special Issue includes high quality theoretical and experimental scientific contributions on the following topics related to the aerospace manufacturing technology: (a) machining of advance aerospace alloys; (b) abrasive processes applied to aerospace components; (c) surface treatments to enhance fatigue performance of aerospace components; (d) joining and assembly of aerospace components; (e) laser machining of aerospace alloys; (f) automated/supervised manufacture of aerospace components; (g) quality supervision of aerospace manufacturing routes. The breadth of topics in this Special Issue is perhaps indicative of the complexity and challenges that the research related to aerospace manufacturing technology can offer. We hope that this issue will act as a catalyst for the development of further research, academic and industrial interactions, and publications related to aerospace manufacturing technologies for the benefit of the academic and industrial research communities.

Carbon emissions locked - in trade

In recent years there has been a growing concern about the emission trade balance of countries. It is due to the fact that countries with an open economy are active players in the international trade, though trade is not only a major factor in forging a country’s economic structure anymore, but it does contribute to the movement of embodied emissions beyond the country borders. This issue is especially relevant from the carbon accounting policy’s point of view, as it is known that the production-based principle is in effect now in the Kyoto agreement. The study aims at revealing the interdependence of countries on international trade and its environmental impacts, and how the carbon accounting method plays a crucial role in evaluating a country’s environmental performance and its role in the climate mitigation processes. The input-output models are used in the methodology, as they provide an appropriate framework for this kind of environmental accounting; the analysis shows an international comparison of four European countries (Germany, the United Kingdom, the Netherlands, and Hungary) with extended trading activities and carbon emissions. Moving from the production-based approach in the climate policy, to the consumptionperspective principle and allocation [15], it would also help increasing the efficiency of emission reduction targets and the evaluation of the sustainability dimension and its impacts of international trade. The results of the study have shown that there is an importance of distinction between the two emission allocation approaches, both from global and local level point of view.

A Consumption-Based Approach to Carbon Emission Accounting – Sectoral Differences and Environmental Benefits

In recent years there has been growing concern about the emission trade balances of countries. This is due to the fact that countries with an open economy are active players in international trade. Trade is not only a major factor in forging a country’s economic structure, but contributes to the movement of embodied emissions beyond country borders. This issue is especially relevant from the carbon accounting policy and domestic production perspective, as it is known that the production-based principle is employed in the Kyoto agreement. The research described herein was designed to reveal the interdependence of countries on international trade and the corresponding embodied emissions both on national and on sectoral level and to illustrate the significance of the consumption-based emission accounting. It is presented here to what extent a consumption-based accounting would change the present system based on production-based accounting and allocation. The relationship of CO2 emission embodied in exports and embodied in imports is analysed here. International trade can blur the responsibility for the ecological effects of production and consumption and it can lengthen the link between consumption and its consequences. Input-output models are used in the methodology as they provide an appropriate framework for climate change accounting. The analysis comprises an international comparative study of four European countries (Germany, the United Kingdom, the Netherlands, and Hungary) with extended trading activities and carbon emissions. Moving from a production-based approach in climate policy to a consumption-based principle and allocation approach would help to increase the efficiency of emission reductions and would force countries to rethink their trading activities in order to decrease the environmental load of production activities. The results of this study show that it is important to distinguish between the two emission accounting approaches, both on the global and the local level.

Schools and the formation of Black identity during the Civil Rights Movement: Change and resistance in Holly Springs, Mississippi, 1964--1974

Desegregation of social and public spaces was the most visible result of the Civil Rights Movement. After 1960, the integration of schools in Mississippi became a source of conflict. The social change of Civil Rights attacked the social order of White Resistance that supported the state superstructure. The public schools were a place for the discovery of identity for Blacks. The integrated on of the schools caused many Whites to leave rather than be integrated with Blacks. Desegregation of schools was also a slow process because the local and state government could not enforce the decisions of the US Courts, leading Blacks to realize their place in American society could only be secured through individual action. ^ This work explains the role of schooling during the integration of the Holly Springs Separate School System. The process of forging a new identity by local Blacks is examined against the forces of social change and resistance. I addition, this work examines the perils for the Blacks as they faced the uncertainty of change in the crucial Civil Rights years between 1964 and 1974. ^ This work analyzes how the Black community dealt with the problems triggered by the desegregation of the school system in Holly Springs, of a constructed social condition, a psychological state of being, the realities of racism and segregation, and the change and resistance between the individual and the collective. It is based on six months of field work investigation. Although the schools were a crucial aspect of community life for Blacks and Whites, Blacks did form their identity in them. Other institutions, such churches were more crucial. Second, the aspect of politeness and belief in law made the experience in Holly Springs unique to that place, and thus, warrants further study to determine its place within the Civil Rights Movement. Finally, while the political and economic control of Holly Springs remained with Whites, desegregation led to the resegregation of the public schools: as Whites left to private schools. ^

Sustainable rural development through alternative economic networks: Redefining relations in the commodity chain for export vegetables in western Guatemala

The current research considers the capacity of a local organic food system for producer and consumer empowerment and sustainable development outcomes in western Guatemala. Many have argued that the forging of local agricultural networks linking farmers, consumers, and supporting institutions is an effective tool for challenging the negative economic, environmental, and sociopolitical impacts associated with industrial models of global food production. But does this work in the context of agrarian development in the developing world? Despite the fact that there is extensive literature concerning local food system formation in the global north, there remains a paucity of research covering how the principles of local food systems are being integrated into agricultural development projects in developing countries. My work critically examines claims to agricultural sustainability and actor empowerment in a local organic food system built around non-traditional agricultural crops in western Guatemala. Employing a mixed methods research design involving twenty months of participant observation, in-depth interviewing, surveying, and a self-administered questionnaire, the project evaluates the sustainability of this NGO-led development initiative and local food movement along several dimensions. Focusing on the unique economic and social networks of actors and institutions at each stage of the commodity chain, this research shows how the growth of an alternative food system continues to be shaped by context specific processes, politics, and structures of conventional food systems. Further, it shows how the specifics of context also produce new relationships of cooperation and power in the development process. Results indicate that structures surrounding agrarian development in the Guatemalan context give rise to a hybrid form of development that at the same time contests and reinforces conventional models of food production and consumption. Therefore, participation entails a host of compromises and tradeoffs that result in mixed successes and setbacks, as actors attempt to refashion conventional commodity chains through local food system formation.^

The sexual division of labor : the impact of organizational change upon group cohesion and the creation of occupational identity

The purpose of this research is to identify the impact of recent organizational change upon the culture of firefighting. The experiences of female firefighters were utilized as a measure of cultural change. A purposive sample of twenty-seven male and female firefighters were interviewed in a semi-structured format about their experiences in the fire service. This research found that the culture of firefighting has adjusted to the presence of previously excluded groups by forging a division among the identities and roles of male and female firefighters. The white, male firefighters, who have traditionally constituted a majority of the workforce, have continued to identify with traditional firefighter roles and reported high levels of cohesion. In contrast, the female firefighters showed a greater variance in their identification with traditional roles and decreased levels of cohesion with the main body of the group.

Cartografia do trabalho de agentes penitenciários: reflexão sobre o “dispositivo prisão”

The Brazilian prison system is going through a serious crisis, not only due to the growth in the number of prisoners and the consequent overcrowding of prisons, but also for the violation of human rights, institutionalization and difficulty in social rehabilitation of inmates. Furthermore, the harmful effects of the prison system affect their workers, who generally are not prioritized by researchers, health programs and government policies. The literature pointing to some consequences of work in prison, among them, the mental illness, stress, alcohol abuse, etc., but little is known about this profession, their problems, the difficulties of their work routine, so as subjective processes involved. So, what are the effects of this work in the prison in the lives of correctional officers? What strategies developed to address the work in prison? This research aims to analyze the effects of this work in the prison in the lives of correctional officers from the state prison in Parnamirim, located in the metropolitan region of Natal-RN. Within the theoretical and methodological perspective of institutional analysis and cartography were carried conversation circles, interviews, in addition to participant observation of the correctional officers work’s routine. The results point to a working routine marked by the performance of procedures that involve risk to the worker, generating situations of tension and stress. Besides, the culture of violence (which is implemented in jail everyday) as well as the training and initial learning of the profession, are responsible for the militarization process of the subjectivities of the correctional officers, producing hard subject, disciplined, stiff, likely to violent practices and other rights violations. Other mapped effects relate to the acquisition of knowledge about the human (“psy” knowledge) responsible for forging the conception of the criminal as "dangerous subject", which, in turn, acts as subjectivity vector in the daily life of prison guards by setting up a way of life crossed by fear and insecurity outside the work environment. Produces a control in the open about their lives and their families, limiting them with regard to family and community life and the realization of leisure activities in public spaces. In this sense, it appears that the arrest acts producing “bad meetings” (from Espinosa's perspective), once it produces sad affections responsible for weakening the conatus, limiting the possibilities of action of these subjects. Although agents develop some strategies to deal with the difficulties of working in prison (among which stand out the development of other professional or leisure activities, spirituality / religiosity and the ability to separate the labor moments from those of their the personal lives, is advocated that such strategies do not offer significant resistance, since they do not question the contemporary legal-criminal logic. The thesis presented supports the proposals of penal abolitionism to present other conceptions of crime and justice through the invention of other practical and conceptual strategies.

Diversity, difference and nation: indigenous peoples on screen in Mexico

This paper draws on constructivist theories of identity that regard the self as, paradoxically, coming into existence through interaction with the other, to investigate the discursive formation of indigenous people in the forging of Mexican national identity. The aim of the essay is to show how difference has been managed and deployed in the establishment of national Mexican identities from independence until the present. This is done with reference to visual culture and film and illustrated with examples from the ‘Golden Age’ as well as ‘the New Mexican Cinema’.

La voz del otro: rompiendo con la tradición del museo

Existe una actitud predominante en el mundo de los museos según la cual las diversas culturas se presentan y se respetan de manera adecuada, dándose un diálogo efectivo entre los museos y las comunidades culturales a las que sirven. Sin embargo, el presente trabajo disiente de dicha creencia, expone sus motivos, y sugiere una trayectoria por la que los museos pueden acercarse con éxito a tales objetivos. Lo que está en juego aquí es el ethos contemporáneo e histórico de los museos y su concepto de la identidad propia, lo que interfiere con su capacidad para incluir a “los otros”, excepto en sus propios términos. El propósito del museo en este sentido es mantener su voz preeminente y su prerrogativa intelectual en sus comunicaciones con el público al que sirve. La idea de que hay múltiples voces que necesitan ser escuchadas no es un concepto fácil de contemplar para los museos, y un paso positivo en aquella dirección representaría un cambio importante con consecuencias de largo alcance.

Investigation of capacitive discharge heating of metallic glasses

In recent years, the discovery of bulk metallic glasses with exceptional properties has generated much interest. One of their most intriguing features is their capacity for viscous flow above the glass transition temperature. This characteristic allows metallic glasses to be formed like plastics at modest temperatures. However, crystallization of supercooled metallic liquids in the best bulk metallic glass-formers is much more rapid than in most polymers and silicate glass-forming liquids. The short times to crystallization impairs experimentation on and processing of supercooled glass-forming metallic liquids. A technique to rapidly and uniformly heat metallic glasses at rates of 10⁵ to 10⁶ kelvin per second is presented. A capacitive discharge is used to ohmically heat metallic glasses to temperatures in the super cooled liquid region in millisecond time-scales. By heating samples rapidly, the most time-consuming step in experiments on supercooled metallic liquids is reduced orders of magnitude in length. This allows for experimentation on and processing of metallic liquids in temperature ranges that were previously inaccessible because of crystallization.

A variety of forming techniques, including injection molding and forging, were coupled with capacitive discharge heating to produce near net-shaped metallic glass parts. In addition, a new forming technique, which combines a magnetic field with the heating current to produce a forming force, was developed. Viscosities were measured in previously inaccessible temperature ranges using parallel plate rheometry combined with capacitive discharge heating. Lastly, a rapid pulse calorimeter was developed with this technique to investigate the thermophysical behavior of metallic glasses at these rapid heating rates.