Enhancing the distribution of Swedish tourism services on international markets : Possible export-ready criteria requisitioned by European tour operators

This paper identifies subjects which are relevant for Swedish suppliers of tourism services beforeapproaching foreign markets. Most suppliers are micro, small or medium sized companies anduse intermediaries, such as tour operators, for internationalization. The research considers theopinion of British and German tour operators, which require some criteria beforehand in orderto simplify both the initialization and the development of cooperation. Destination marketingorganizations (DMOs) are hereby the go-betweens since they not only represent small-scalesuppliers on international markets, but also initiate first encounters between suppliers and touroperators. Suppliers need to provide DMOs with accurate information in order to ensure thebest possible representation. After initializing collaboration, business relationships are sought todevelop in order to facilitate long-term cooperation. Proper preparation forms therefore the basefor strengthening the competitiveness of Swedish tourism prior approaching internationalmarkets. The enhancement of distributing Swedish tourism services on foreign markets appearedto be a profitable way to enable further growth, which is strongly limited on the domestic market.Increasing the export share therefore secures and further facilitates tourism’s valuablecontributions to the Swedish economy.

Potentiostatic control of ionic liquid surface film formation on ZE41 magnesium alloy

The generation of potentially corrosion-resistant films on light metal alloys of magnesium have been investigated. Magnesium alloy, ZE41 [Mg−Zn−Rare Earth (RE)-Zr, nominal composition 4 wt % Zn, 1.7 wt % RE (Ce), 0.6 wt % Zr, remaining balance, Mg], was exposed under potentiostatic control to the ionic liquid trihexyl(tetradecyl)phosphonium diphenylphosphate, denoted [P_6,6,6,14][DPP]. During exposure to this IL, a bias potential, shifted from open circuit, was applied to the ZE41 surface. Electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA) were used to monitor the evolution of film formation on the metal surface during exposure. The EIS data indicate that, of the four bias potentials examined, applying a potential of −200 mV versus OCP during the exposure period resulted in surface films of greatest resistance. Both EIS measurements and scanning electron microscopy (SEM) imaging indicate that these surfaces are substantially different to those formed without potential bias. Time of flight-secondary ion mass spectrometry (ToF-SIMS) elemental mapping of the films was utilized to ascertain the distribution of the ionic liquid cationic and anionic species relative to the microstructural surface features of ZE41 and indicated a more uniform distribution compared with the surface following exposure in the absence of a bias potential. Immersion of the treated ZE41 specimens in a chloride contaminated salt solution clearly indicated that the ionic liquid generated surface films offered significant protection against pitting corrosion, although the intermetallics were still insufficiently protected by the IL and hence favored intergranular corrosion processes.

Collaborative authorship in film production: Walter Murch and film editing

Filmmaking is frequently cited as the most collaborative of all arts, yet for the most part, mainstream and scholarly literature have received films as the creative voice of just one artist – the director. The reasons for this are many: general ignorance of how films are made; the hijacking of film theory by literary theory, and the continuing popularity of the myth of the Romantic Artist as solitary genius are some of them. The case for collaborative authorship has gained momentum since the 1980s as studies on the production of individual films, actors, production companies and the history of the film industry as a whole have proliferated and drawn attention to the disparities between how films are perceived and how they are actually made. This article analyses collaboration in film production culture through examination of the role of the film editor. Concentrating specifically on the film/sound editor and mixer Walter Murch, it examines his role as a collaborative author in his early work with director Francis Ford Coppola and his later work with English director Anthony Minghella.

Understanding water and ion transport behaviour and permeability through poly(amide) thin film composite membrane

Molecular dynamics (MD) together with the adaptive biasing force (ABF) and metadynamics free energy calculation methods was used to investigate the permeation properties of salt water through poly(amide) thin film composite reverse osmosis membranes. The thin films were generated by annealing an amorphous cell of poly(amide) chains through an MD method. The MD results showed they have typical structural properties of the active layer of thin film composite membranes and comparable water diffusivity (2.13×10^-5cm²/s for the film with a density of 1.06g/cm³) and permeability (9.27×10^-15cm³cm/cm²sPa) to experimental data. The simulations of water permeation through the films under different transmembrane pressures revealed the behaviours of water molecules in the thin films and the dynamic regimes of water permeation, including Brownian diffusion, flush and jump diffusion regimes. The intermolecular interactions of water and ions with poly(amide) chains showed a strong dependence on the local structure of films. The attraction between water and ploy(amide) molecules can be up to 8.5kcal/mol in dense polymer regions and 5kcal/mol in the pores of about 3nm. The ABF and metadynamics simulations produced the profiles of free energy potential of water and ions along the depth of the thin films, which provided important information for quantitatively determining the barrier energy required for water permeation and rejection of ions. The thin film with a density of 1.06g/cm³ and a thickness of 6nm offers a rejection to Na⁺ but a slight absorption of Cl^- (0.25kcal/mol) at 0.3-0.4nm distance to its surface. Water molecules must overcome 63kcal/mol energy to move to the centre of the film. The dependences of the barrier energy and the water-polymer interaction energy on the local free volume size in the thin film were analysed. The simulations of water permeation under high transmembrane pressures showed a nonlinear response of the concentration and distribution of water molecules in the film to the imposed pressure. Compaction of the film segments close to the porous substrate and water congestion in dense regions significantly influenced the water permeation when the membrane was operated under pressures of more than 3.0MPa.

Mixed feelings: Anglo-Indians and the distribution of the sensible in Indian cinema

Hollywood, and various regional cinemas in India typically represent Mixed-Race Anglo-Indians as a degenerate community marked by lax morals, alcoholism, and indolence. These stereotypical tropes typically generate indignant protests from members of this miniscule Indian community, and debates about the representation of Anglo-Indians focus on the injustices propagated by such stereotypes. This paper rethinks Anglo-Indian representation in cinema by drawing on Jacques Rancière’s concept of ‘the distribution of the sensible,’ which provides a cartography for understanding how one’s various identity assignations structure sensory experience. In other words those who are marginalized have ways of seeing and hearing from those occupy normative or dominant subject positions, and these differences are best approached in terms of neo-Kantian aesthetic judgment. It also argues, with Rancière, that ‘inequality’ is built into the distribution of the sensible. Drawing on a number of Indian and Hollywood films — including Aparna Sen’s 36 Chowringhee Lane (1981) Anjan Dutt’s Bada Din (1998) Ismail Merchant’s Cotton Mary (2000), Bow Barracks Forever (2004) and Harry McClure’s Going Away (2013) — the paper contends that Rancière’s ‘distribution of the sensible’ allows us to think through a politics that is connected to ‘aesthetic judgement’ as well as a politics of differentiation that informs our understanding of the function of minoritarian characters in narrative cinema.

Distribution strategies for the base of the pyramid: an exploratory study in Brazil

Access has been one of the main difficulties companies have faced in emerging markets (PRAHALAD, 2005). The capillarity of the market, the existence of small, not professionalized and sometimes informal retailers, the lack of infrastructure and high transportation costs are some of the distribution challenges companies face in poorer regions. The literature concerning the Base of the Pyramid (BoP) is still recent and only after the seminal article by Prahalad and Hart (2002), it evolved into many different management perspectives. However, there is a lack of researches concerning distribution strategies to the BoP. Therefore, the main objective of this research is to identify, in the perception of executives working in the market, the conditions associated to a satisfactory distribution for the BoP market in Brazil and to build a substantive theory that helps to shed light to the understanding of the distribution phenomenon adopted by consumer goods companies to reach the BoP market in Brazil. In order to accomplish the objectives of this thesis, a grounded theory methodology (Glaser; Strauss, 1967; Corbin; Strauss, 2008) was used. This approach helped to identify the channel strategies used by local and global companies in the market. Many techniques for data collection were applied. The most important one was in-depth interviews with 26 executives from 24 different consumer goods companies in Brazil. Among the companies there were small, medium and large enterprises; which were also grouped as manufacturers, distributors and retailers. Furthermore, secondary data were examined to identify business strategies to reach BoP and map global distribution initiatives. A database from a consumer panel was also used to analyze what and where BoP consumers purchase non-durable goods. It was verified that small and traditional retailing is a very strong format in BoP markets and in the Northern/Northeastern regions. Cash & Carry is a format that is growing a lot. On the other hand, hypermarkets are not very used by low income population. The results suggest that three major categories are associated to a satisfactory distribution: (a) willingness, which means the effort, knowledge and enthusiasm a firm has to operate at BoP markets; (b) well-done execution, which is related to designing correctly the marketing channel and operating efficiently in an environment full of obstacles, such as lack of infrastructure, capillarity, lack of safety, regional differences and informality, and (c) relationship, which was perceived to be friendlier and essential at BoP markets, since it is very difficult for manufacturers to reach the entire market alone. It is more likely to have a satisfactory distribution when manufacturers establish strong relationships in the marketing channel. Besides, small retailers have a perception of isolation and expect a higher level of relationship. These major categories explain also the competitive advantage that local companies have in relation to MNCs and large companies. Despite of the limitations of an exploratory study, it is expected that this thesis will contribute to the BoP knowledge as well as to the identification of the peculiarities of distribution in BoP markets.

The online distribution strategy of luxury products and their vertical extensions

Uma importante tendência do mercado de luxo é a extensão de marca em um novo segmento de mercado por meio da chamada extensão vertical, que pode ser para cima ou para baixo. Em outras palavras, significa que a organização passa a atuar em um novo segmento dentro de uma mesma categoria de produtos, mas com diferente público-alvo que sua marca original. Nesse processo, a empresa inicia atividade em um novo segmento com diferente nível de luxo. A distribuição é um aspecto fundamental do composto de Marketing e a importância da internet como canal de distribuição dessa indústria tem aumentado expressivamente nos últimos anos. Dessa forma, faz-se necessário compreender como as marcas de luxo gerenciam suas estratégias de distribuição online quando desenvolvem processos de extensão de marca e penetração em novos segmentos. Com o objetivo de analisar a estratégia de distribuição da indústria de luxo, um estudo exploratório foi desenvolvido focando bens de luxo pessoal (em categorias como costura, relógios & jóias, couro e sapatos). Uma amostra significativa constituída de marcas originais e suas extensões foi analisada para constituir um modelo comparativo entre duas variáveis: o nível de diferenciação entre os canais de distribuição da marca original e suas extensões; e a distância entre as próprias marcas no que concerne ao seus posicionamentos. Esse estudo contribui para o entendimento da dinâmica de distribuição do mercado e colabora com a compreensão do comportamento das empresas que atuam nele, dependendo do tipo de extensões que elas desenvolvem e da forma como elas são conduzidas.

Numerical simulation of the liquid phase in SnO2 thin film deposition by sol-gel-dip-coating

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Physicochemical characterization of collagen fibers and collagen powder for self-composite film production

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of neighborhood impacts caused by companies of the high-tech industrial cluster of São Carlos, SP, Brazil

The purpose of this study was to develop a methodology for evaluating neighborhood impacts using a Geographic Information System (GIS) and to apply the procedures to the companies of the High-Technology Industrial Cluster of São Carlos. To this end, an evaluation was made of the neighborhood impacts on the physical environment, urban components, quality of life, and urban infrastructure using impact matrices, and the impacts were assigned scores according to type, order, magnitude and duration. Fifty one companies were examined based on data provided by the companies themselves and on field surveys. The impacts are represented spatially in proportional symbols maps, based on the spatial distribution of the companies in the urban area of the city of São Carlos and the areas of influence of each company. The application of the proposed methodology served to validate it and indicated that the neighborhood impacts caused by the companies of this study are related to each company's type of activity, its size, and its occupation of the area. © 2008 Journal of Urban and Environmental Engineering (JUEE). All rights reserved.

The Mexican film industry and its participation in the global value chain

Includes bibliography

Magnetic field profile of a mesoscopic SQUID-shaped superconducting film

Using a genuinely tridimensional approach to the time-dependent Ginzburg-Landau theory, we have studied the local magnetic field profile of a mesoscopic superconductor in the so-called SQUID geometry, i.e., a square with a hole at the center connected to the outside vacuum through a very thin slit. Our investigation was carried out in both the Meissner and the mixed state. We have also studied the influence of the temperature on the space distribution of the local magnetic field. © 2013 IOP Publishing Ltd.

Effect of diamond-like carbon thin film coated acrylic resin on candida albicans biofilm formation

Purpose: The purpose of this study was to evaluate the effect of diamond-like carbon thin films doped and undoped with silver nanoparticles coating poly(methyl methacrylate) (PMMA) on Candida albicans biofilm formation. The control of biofilm formation is important to prevent oral diseases in denture users. Materials and Methods: Forty-five PMMA disks were obtained, finished, cleaned in an ultrasonic bath, and divided into three groups: Gc, no surface coating (control group); Gdlc, coated with diamond-like carbon film; and Gag, coated with diamond-like carbon film doped with silver nanoparticles. The films were deposited using a reactive magnetron sputtering system (physical vapor deposition process). The specimens were characterized by optical profilometry, atomic force microscopy, and Rutherford backscattering spectroscopy analyses that determined differences in chemical composition and morphological structure. Following sterilization of the specimens by γ-ray irradiation, C. albicans (ATCC 18804) biofilms were formed by immersion in 2 ml of Sabouraud dextrose broth inoculated with a standardized fungal suspension. After 24 hours, the number of colony forming units (cfu) per specimen was counted. Data concerning biofilm formation were analyzed using ANOVA and the Tukey test (p < 0.05). Results: C. albicans biofilm formation was significantly influenced by the films (p < 0.00001), reducing the number of cfu, while not affecting the roughness parameters (p > 0.05). The Tukey test showed no significant difference between Gdlc and Gag. Films deposited were extremely thin (∼50 nm). The silver particles presented a diameter between 60 and 120 nm and regular distribution throughout the film surface (to Gag). Conclusion: Diamond-like carbon films, doped or undoped with silver nanoparticles, coating the base of PMMA-based dentures could be an alternative procedure for preventing candidosis in denture users. © 2013 by the American College of Prosthodontists.

The employment situation in Latin America and the Caribbean: Labour productivity and distribution issues

Although the economies of Latin America and the Caribbean grew more slowly in 2011 than in 2010, there were some improvements on the employment front. Workers benefited from the region’s satisfactory economic performance in an increasingly complex international setting. The unemployment rate fell from 7.3% in 2010 to 6.7% in 2011 thanks to a halfpercentage- point gain in the urban employment rate. Both rates are at levels that have not been seen for a long time. The proportion of formal jobs with social benefits rose as well, and underemployment declined. The average wage and the minimum wage both increased in real terms, albeit only moderately. Economic performance and the employment situation varied widely among the subregions. The unemployment rate dropped by 0.6 percentage points in South America but 0.4 percentage points in the countries of the northern part of Latin America. In the countries of the Caribbean, the employment rate was up by 0.2 percentage points. The data show that substantial labour market gaps and serious labour-market insertion issues remain. This is especially the case for women and young people, for whom unemployment rates and other labour indicators are still unfavourable. The second part of this report looks at whether the fruits of economic growth and rising productivity have been distributed equitably between workers and companies. Between 2002 and 2008 (the most recent expansionary economic cycle), wages as a percentage of GDP fell in 13 of the 21 countries of the region for which data are available and rose in just 8. This points to redistribution that is unfavourable to workers, which is worrying in a region which already has the most unequal distribution of income in the world. Underlying this trend is the fact that, worldwide, wages have grown less than productivity. Beyond the ethical dimension of this issue, it jeopardizes the social and economic sustainability of growth. For example, one of the root causes of the recent financial crisis was that households in the United States responded to declining wage income by borrowing more to pay for consumption and housing. This turned out to be unsustainable in the long run. Over time, it undermines the labour market’s contribution to the efficient allocation of resources and its distributive function, too, with negative consequences for democratic governance. Among the triggers of this distributive worsening most often cited in the global debate are market deregulation and its impact on financial globalization, technological change that favours capital over labour, and the weakening of labour institutions. What is needed here is a public policy effort to help keep wage increases from lagging behind increases in productivity. Some countries of the region, especially in South America, saw promising developments during the second half of the 2000s in the form of a positive trend reversal in wages as a percentage of GDP. One example is Brazil, where a minimum wage policy tailored to the dynamics of the domestic market is considered to be one of the factors behind an upturn in the wage share of GDP. The region needs to grow more and better. Productivity must grow at a steady pace, to serve as the basis for sustained improvements in the well-being of the populace and to narrow the gap between the economies of Latin America and the Caribbean and the more advanced economies. And inequality must be decreased; this could be achieved by closing the productivity gap between upgraded companies and the many firms whose productivity is low. As set out in this report, the region made some progress between 2002 and 2010, with labour productivity rising at the rate of 1.5% a year. But this progress falls short of that seen in other regions such as Sub-Saharan Africa (2.1%) and, above all, East Asia (8.3%, not counting Japan and the Republic of Korea). Moreover, in many of the countries of the region these gains have not been distributed equitably. Therein lies a dual challenge that must be addressed: continue to increase productivity while enhancing the mechanisms for distributing gains in a way that will encourage investment and boost worker and household income. The Economic Commission for Latin America and the Caribbean (ECLAC) and the International Labour Organization (ILO) estimate that the pace of economic growth in the region will be slightly slower in 2012 than in 2011, in a global economic scenario marked by the cooling of several of the main economic engines and a high degree of uncertainty concerning, above all, prospects for the euro zone. The region is expected to continue to hold up well to this worsening scenario, thanks to policies that leveraged more favourable conditions in the past. This will be felt in the labour markets, as well, so expectations are that unemployment will edge down by as much as two tenths of a decimal point.

Evaluation of Antimicrobial Activity of Silver Nanoparticles for Carboxymethylcellulose Film Applications in Food Packaging

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)