Are cryptic host species also cryptic to parasites? Host specificity and geographical distribution of acanthocephalan parasites infecting freshwater Gammarus

Many parasites infect multiple host species. In coevolving host–parasite interactions, theory predicts that parasites should be adapted to locally common hosts, which could lead to regional shifts in host preferences. We studied the interaction between freshwater Gammarus (Crustacea, Amphipoda) and their acanthocephalan parasites using a large-scale field survey and experiments, combined with molecular identification of cryptic host and parasite species. Gammarus pulex is a common host for multiple species of Acanthocephala in Europe but, in Switzerland, is less common than two cryptic members of the Gammarus fossarum species complex (type A and type B). We found that natural populations of these cryptic species were frequently infected by Pomphorhynchus tereticollis and Polymorphus minutus. Four additional parasite species occurred only locally. Parasites were more common in G. fossarum type B than in type A. Infection experiments using several host and parasite sources confirmed consistently lower infection rates in G. pulex than in G. fossarum type A, suggesting a general difference in susceptibility between the two species. In conclusion, we could show that cryptic host species differ in their interactions with parasites, but that these differences were much less dramatic than differences between G. fossarum (type A) and G. pulex. Our data suggest that the acanthocephalans in Switzerland have adapted to the two most common Gammarus species in this region where host species frequencies differ from near-by regions in Europe.

Plant diversity and ecosystem multifunctionality peak at intermediate levels of woody cover in global drylands

Aim The global spread of woody plants into grasslands is predicted to increase over the coming century. While there is general agreement regarding the anthropogenic causes of this phenomenon, its ecological consequences are less certain. We analysed how woody vegetation of differing cover affects plant diversity (richness and evenness) and the surrogates of multiple ecosystem processes (multifunctionality) in global drylands, and how these change with aridity. Location Two hundred and twenty-four dryland sites from all continents except Antarctica, widely differing in their environmental conditions (from arid to dry-subhumid sites) and relative woody cover (from 0 to 100). Methods Using a standardized field survey, we measured the cover, richness and evenness of perennial vegetation. At each site, we measured 14 soil variables related to fertility and the build-up of nutrient pools. These variables are critical for maintaining ecosystem functioning in drylands. Results Species richness and ecosystem multifunctionality were strongly related to woody vegetation, with both variables peaking at a relative woody cover (RWC) of 41–60. This relationship shifted with aridity. We observed linear positive effects of RWC in dry-subhumid sites. These positive trends shifted to hump-shaped RWC–diversity and multifunctionality relationships under semi-arid environments. Finally, hump-shaped (richness, evenness) or linear negative (multifunctionality) effects of RWC were found under the most arid conditions. Main conclusions Plant diversity and multifunctionality peaked at intermediate levels of woody cover, although this relationship became increasingly positive in wetter environments. This comprehensive study accounts for multiple ecosystem attributes across a range of levels of woody cover and environmental conditions. Our results help us to reconcile contrasting views of woody encroachment found in the current literature and can be used to improve predictions of the likely effects of encroachment on biodiversity and ecosystem services.

Evaluating the Quality and Accuracy of TanDEM-X Digital Elevation Models at Archaeological Sites in the Cilician Plain, Turkey

Satellite remote sensing provides a powerful instrument for mapping and monitoring traces of historical settlements and infrastructure, not only in distant areas and crisis regions. It helps archaeologists to embed their findings from field surveys into the broader context of the landscape. With the start of the TanDEM-X mission, spatially explicit 3D-information is available to researchers at an unprecedented resolution worldwide. We examined different experimental TanDEM-X digital elevation models (DEM) that were processed from two different imaging modes (Stripmap/High Resolution Spotlight) using the operational alternating bistatic acquisition mode. The quality and accuracy of the experimental DEM products was compared to other available DEM products and a high precision archaeological field survey. The results indicate the potential of TanDEM-X Stripmap (SM) data for mapping surface elements at regional scale. For the alluvial plain of Cilicia, a suspected palaeochannel could be reconstructed. At the local scale, DEM products from TanDEM-X High Resolution Spotlight (HS) mode were processed at 2 m spatial resolution using a merge of two monostatic/bistatic interferograms. The absolute and relative vertical accuracy of the outcome meet the specification of high resolution elevation data (HRE) standards from the National System for Geospatial Intelligence (NSG) at the HRE20 level.

Leader–member exchange (LMX), job autonomy, and creative work involvement

Researchers have claimed that high quality of supervisor–employee relationships (i.e., leader– member exchange; LMX) fosters creativity at work. Moreover, researchers have acknowledged that this relationship is not clear-cut but rather complex. The present study focused on the moderating role of job autonomy in the LMX-creative work involvement relationship. Longitu-dinal field survey data (N = 144) collected in a high-technology firm revealed a positive asso-ciation between LMX and creative work involvement and confirmed our assumptions on the moderating role of job autonomy. The positive relationship between LMX and creative work involvement was stronger when employees experienced greater job autonomy. Our findings point to the importance of considering the interplay of both, the leader–member relationship and job design issues for increasing employees' creative work involvement.

Human impacts and aridity differentially alter soil N availability in drylands worldwide

Aims Climate and human impacts are changing the nitrogen (N) inputs and losses in terrestrial ecosystems. However, it is largely unknown how these two major drivers of global change will simultaneously influence the N cycle in drylands, the largest terrestrial biome on the planet. We conducted a global observational study to evaluate how aridity and human impacts, together with biotic and abiotic factors, affect key soil variables of the N cycle. Location Two hundred and twenty-four dryland sites from all continents except Antarctica widely differing in their environmental conditions and human influence. Methods Using a standardized field survey, we measured aridity, human impacts (i.e. proxies of land uses and air pollution), key biophysical variables (i.e. soil pH and texture and total plant cover) and six important variables related to N cycling in soils: total N, organic N, ammonium, nitrate, dissolved organic:inorganic N and N mineralization rates. We used structural equation modelling to assess the direct and indirect effects of aridity, human impacts and key biophysical variables on the N cycle. Results Human impacts increased the concentration of total N, while aridity reduced it. The effects of aridity and human impacts on the N cycle were spatially disconnected, which may favour scarcity of N in the most arid areas and promote its accumulation in the least arid areas. Main conclusions We found that increasing aridity and anthropogenic pressure are spatially disconnected in drylands. This implies that while places with low aridity and high human impact accumulate N, most arid sites with the lowest human impacts lose N. Our analyses also provide evidence that both increasing aridity and human impacts may enhance the relative dominance of inorganic N in dryland soils, having a negative impact on key functions and services provided by these ecosystems.

Validation of an instrument for assessing the medicolegal death investigation system: A public health approach

Background. This study validated the content of an instrument designed to assess the performance of the medicolegal death investigation system. The instrument was modified from Version 2.0 of the Local Public Health System Performance Assessment Instrument (CDC) and is based on the 10 Essential Public Health Services. ^ Aims. The aims were to employ a cognitive testing process to interview a randomized sample of medicolegal death investigation office leaders, qualitatively describe the results, and revise the instrument accordingly. ^ Methods. A cognitive testing process was used to validate the survey instrument's content in terms of the how well participants could respond to and interpret the questions. Twelve randomly selected medicolegal death investigation chiefs (or equivalent) that represented the seven types of medicolegal death investigation systems and six different state mandates were interviewed by telephone. The respondents also were representative of the educational diversity within medicolegal death investigation leadership. Based on respondent comments, themes were identified that permitted improvement of the instrument toward collecting valid and reliable information when ultimately used in a field survey format. ^ Results. Responses were coded and classified, which permitted the identification of themes related to Comprehension/Interpretation, Retrieval, Estimate/Judgment, and Response. The majority of respondent comments related to Comprehension/Interpretation of the questions. Respondents identified 67 questions and 6 section explanations that merited rephrasing, adding, or deleting examples or words. In addition, five questions were added based on respondent comments. ^ Conclusion. The content of the instrument was validated by cognitive testing method design. The respondents agreed that the instrument would be a useful and relevant tool for assessing system performance. ^

BENZENE TOXICITY AND THE OCCURRENCE OF BENZENE IN THE AMBIENT AIR OF THE HOUSTON AREA

This study was conducted by either literature review or actual field survey. Results are summarized as follows: (1) Long-term occupational exposure of workers to benzene vapor at levels of 3-7 ppm, 2-3 ppm and 1.6 ppm may result in a decreased level of leucocyte alkaline phosphates, an increased incidence of chromosome aberrations and an increased level of ALA in erythrocytes, respectively; (2) Benzene is capable of causing fetotoxic effects in animals at levels as low as 10 ppm by volume; (3) Exposure of animals to or less than 1 ppm benzene vapor may result in leucopenia, an inverse ratio of muscle antagonist chronaxy and a decreased level of ascorbic acid in fetus's and mother's liver as well as whole embryo; (4) Benzene is causally associated with the increased incidence of pancytopenia, including unicytopenia, bicytopenia and aplastic anemia, and chromosome aberrations in occupational exposure population, and at best benzene must also be considered as a leukemogen; (5) Since it can be emitted into the atmosphere from both man-made and natural sources, benzene in some concentrations is present everywhere in the various compartments of the environment; (6) The findings of the emission of benzene from certain natural sources indicate that reducing benzene to a zero-level of exposure is theoretically impossible; (7) The annual average of benzene concentration detected in the Houston ambient air is 2.50 ppb, which is about 2.4 times higher than the nation-wide annual average exposure level and may have been some health implications to the general public; (8) In the Houston area, stationary sources are more important than mobile sources in contributing to benzene in the ambient air. ^

Time-series of seagrass and land cover maps from 1972 to 2010, in South East Queensland, Australia, with links to GeoTIFFs

Long term global archives of high-moderate spatial resolution, multi-spectral satellite imagery are now readily accessible, but are not being fully utilised by management agencies due to the lack of appropriate methods to consistently produce accurate and timely management ready information. This work developed an object-based remote sensing approach to map land cover and seagrass distribution in an Australian coastal environment for a 38 year Landsat image time-series archive (1972-2010). Landsat Multi-Spectral Scanner (MSS), Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM+) imagery were used without in situ field data input (but still using field knowledge) to produce land and seagrass cover maps every year data were available, resulting in over 60 map products over the 38 year archive. Land cover was mapped annually using vegetation, bare ground, urban and agricultural classes. Seagrass distribution was also mapped annually, and in some years monthly, via horizontal projected foliage cover classes, sand and deep water. Land cover products were validated using aerial photography and seagrass maps were validated with field survey data, producing several measures of accuracy. An average overall accuracy of 65% and 80% was reported for seagrass and land cover products respectively, which is consistent with other studies in the area. This study is the first to show moderate spatial resolution, long term annual changes in land cover and seagrass in an Australian environment, created without the use of in situ data; and only one of a few similar studies globally. The land cover products identify several long term trends; such as significant increases in South East Queensland's urban density and extent, vegetation clearing in rural and rural-residential areas, and inter-annual variation in dry vegetation types in western South East Queensland. The seagrass cover products show that there has been a minimal overall change in seagrass extent, but that seagrass cover level distribution is extremely dynamic; evidenced by large scale migrations of higher seagrass cover levels and several sudden and significant changes in cover level. These mapping products will allow management agencies to build a baseline assessment of their resources, understand past changes and help inform implementation and planning of management policy to address potential future changes.

Map of Cathedral Massif Glacier and forefield

The map covers the Cathedral Massif Glacier with its proglacial area and the surrounding terrain - altogether an area of about 5.2 square kilometers. The small cirque glacier is located in the Cathedral Massif on the continental slope of the northern Boundary Range in British Columbia, Canada. The field survey and the terrestrial photogrammetry was carried out in July 1977. In addition aerial photos taken in August 1975 were used for the photogrammetric plotting. Due to the lack of connection with the official Canadian geodetic net, a local net was used. The main objective of the mapping was to document the present-day glacier with its specific topographical features of the forefield. The map is printed in five colours in offset. The surface area of the glacier was 1.71 square kilometers in 1977 and has further reduced since then. During the stage of "maximum" neoglacial extend, the glacier area must have been close to 2.8 square kilometers.

Benthic cover map of Heron Reef derived from a high-spatial-resolution multi-spectral satellite image using object based image analysis

Providing accurate maps of coral reefs where the spatial scale and labels of the mapped features correspond to map units appropriate for examining biological and geomorphic structures and processes is a major challenge for remote sensing. The objective of this work is to assess the accuracy and relevance of the process used to derive geomorphic zone and benthic community zone maps for three western Pacific coral reefs produced from multi-scale, object-based image analysis (OBIA) of high-spatial-resolution multi-spectral images, guided by field survey data. Three Quickbird-2 multi-spectral data sets from reefs in Australia, Palau and Fiji and georeferenced field photographs were used in a multi-scale segmentation and object-based image classification to map geomorphic zones and benthic community zones. A per-pixel approach was also tested for mapping benthic community zones. Validation of the maps and comparison to past approaches indicated the multi-scale OBIA process enabled field data, operator field experience and a conceptual hierarchical model of the coral reef environment to be linked to provide output maps at geomorphic zone and benthic community scales on coral reefs. The OBIA mapping accuracies were comparable with previously published work using other methods; however, the classes mapped were matched to a predetermined set of features on the reef.

Benthic and substrate cover data derived from a time series of photo-transect surveys for the Eastern Banks, Moreton Bay Australia, 2004-2015

This paper describes seagrass species and percentage cover point-based field data sets derived from georeferenced photo transects. Annually or biannually over a ten year period (2004-2015) data sets were collected using 30-50 transects, 500-800 m in length distributed across a 142 km**2 shallow, clear water seagrass habitat, the Eastern Banks, Moreton Bay, Australia. Each of the eight data sets include seagrass property information derived from approximately 3000 georeferenced, downward looking photographs captured at 2-4 m intervals along the transects. Photographs were manually interpreted to estimate seagrass species composition and percentage cover (Coral Point Count excel; CPCe). Understanding seagrass biology, ecology and dynamics for scientific and management purposes requires point-based data on species composition and cover. This data set, and the methods used to derive it are a globally unique example for seagrass ecological applications. It provides the basis for multiple further studies at this site, regional to global comparative studies, and, for the design of similar monitoring programs elsewhere.

High-resolution digital elevation model (DEM) of a thermokarst depression in Siberian ice-rich permafrost deposits

This data set provides a high-resolution digital elevation model (DEM) of a thermokarst depression (~7 km²) on ice-complex deposits in the Arctic Lena Delta, Siberia. The DEM based on a geodetic field survey and was used for quantitative land surface analyses and detailed description of the thermokarst depression morphology. Detailed morphometrical analyses, volume calculations, and solar radiation modeling were performed and statistically analyzed by Ulrich et al. (2010) to investigate the asymmetrical thermokarst depression development and directed lake migration previously proposed by Morgenstern et al. (2008). Furthermore, the high-resolution DEM in combination with satellite data allowed detailed analyses of spatial and temporal landscape changes due to thermokarst development (Günther, 2009).

The determinants of rural electrification in Bihar, India

This paper explores intra-state disparity in access to electricity and examines the determinants of electrification at the village level in Bihar, one of the underdeveloped states in India. Our field survey of 80 villages in 5 districts conducted in 2008-09 found that 48 villages (60%) are electrified when using the definition of electrification that a village is electrified if any one household in the village is connected to electricity. The degrees of “electrification” in terms of the proportion of household connection and available hours of electricity remain by and large low, and at the same time differ across districts, villages and seasons. In the processes of electrification, approximately 40% of villages have been electrified in recent years. Based on the basic findings of the survey, this paper examines the electrification processes and how it has changed in recent years. The econometric analyses demonstrate that location is the most important determinant of a village’s electricity connection. Another important finding is that with the rapid progress of rural electrificationunder the recent government programme and the tendency to connect the villages which are easily accessible, the collective bargaining power of the village, which used to significantly affect the process of electrification, has lost influence. This adversely affects remote villages. In order to extend electricity supplies to remote and geographically disadvantaged villages, the government needs to consider seriously other options for sustainable electricity supply, such as decentralized distribution of electricity rather than the conventional connection through the national/local grids.

Knowledge spillover in Indian automobile industry : the process and the coverage

In India, as the production of passenger cars increased, many local small and medium enterprises (SMEs) entered the parts and components manufacturing sector. The sources of knowledge for large enterprises and SMEs are different. Naturally, spillover effects among large enterprises and between large enterprises and SMEs are different. This paper focuses on knowledge spillover among large enterprises and from large enterprises to SMEs. Subcontractor can absorb relation-specific skills through repeated interaction with parent company. The results of field survey emphasizes that relation-specific skills are a determinant factor of spillover effects from assemblers and large auto component manufacturers to SMEs. Econometric analysis shows that spillover effects among medium and large automobile units and from medium and large automobile units to small units went beyond boundary of cluster.

Metodología para la optimización de la base de datos de líneas límite del Instituto Geográfico Nacional

Esta metodología se ha desarrollado en el marco de un proyecto que es el objeto del Convenio Específico de Colaboración entre el Instituto Geográfico Nacional y la Escuela de Topografía de la Universidad Politécnica de Madrid relativo a la investigación, desarrollo, formación y difusión de conocimientos en el campo de las tecnologías de la información geográfica (TIG) para la investigación y desarrollo de la tecnología y metodología adecuada para la optimización de la información de la Base de Datos de Líneas Límite de la Dirección General del Instituto Geográfico Nacional. El fin fundamental del mismo es desarrollar una metodología para mejorar la precisión de la Base de Datos de Líneas Límite que tiene el Instituto Geográfico Nacional. La exigencia actual de calidad y seguridad en la descripción geométrica de las líneas límite obliga a optimizar dicha descripción mediante la aplicación de nuevas tecnologías no existentes en el momento del levantamiento, y al diseño de metodologías adecuadas que, minimizando los tiempos y costes de ejecución, consideren asimismo los distintos agentes que participan en España en la definición de las líneas límite. Para desarrollar dicha metodología será necesario en primer lugar digitalizar la información de los cuadernos de campo y las actas de deslinde existentes en el Instituto Geográfico Nacional, para que sea un trabajo abordable desde las tecnologías actuales; posteriormente, volcar la información referente a las líneas límite sobre ortofotografías a escala 1:5.000, a partir de los datos de los cuadernos de campo digitalizados. Se propondrá un nuevo sistema de gestión, tratamiento y almacenamiento de las líneas límite, con información sobre su linaje (origen de datos, precisión), así como el formato de salida de las propias líneas límite. Para controlar la calidad de la metodología propuesta, se deberá validar la misma mediante un estudio teórico de lamedida de rendimientos y precisiones y su verificación mediante toma de datos en campo. Particularmente, se llevará a cabo dicha validación en un conjunto de 140 líneas límite de 36 municipios de la provincia de Ávila y Segovia (los comprendidos en las hojas 556 y 457 del Mapa Topográfico Nacional 1:50.000). Una vez contrastada la metodología y efectuados los oportunos procesos de refinamiento, se redactarán las conclusiones de todo el proyecto, que englobarán las recomendaciones de trabajo y las precisiones resultantes, los rendimientos de los diferentes procesos y los costes que se generen mediante el empleo de la nueva metodología. ABSTARCT: This paper introduces the development of a methodology for the optimisation of the municipal boundaries database of the Instituto Geográfico Nacional. This project has arisen as part of a collaboration agreement between the Instituto Geográfico Nacional and the Escuela de Topografía of the Universidad Politécnica de Madrid which seeks to promote research, development and training in Geographic Information Technologies. Current quality requirements demand the use of new technologies to improve the accuracy of the geometrical description of municipal boundaries. These technologies didn’t exist when the municipal boundaries were first drawn up. Besides, it is convenient to design an appropriate methodology that minimises both costs and time employed. The two main steps in the process are: first, the conversion of all the available data (fixing boundary minutes and field survey notebooks) into digital format in order to make possible their integration in a CAD system; and second, the display and visual overlay of these digital data over an 1:5000 orthophotography of the study area, to identify the boundary monuments. A new system will be proposed to manage, process and storage municipal boundaries information, including its lineage; an output format for these data will be designed as well. In addition, a quality control will be designed to audit this scheme using Data Analysis and Statistical Inference techniques. Moreover, GPS technology will be used to get some boundary monuments co-ordinates to check the results of the proposed methodology. The complete scheme will be tested in a study area corresponding to Ávila and Segovia provinces comprising 140 boundary segments from 36 municipalities.