História natural e ecologia das serpentes da Floresta Nacional de Caxiuanã e áreas adjacentes, Pará, Brasil

A busca por padrões de estrutura e composição das comunidades é essencial para prover informações que permitam o manejo sustentado de populações e monitoramento de atividades antrópicas. Na região neotropical, onde ocorre grande riqueza de espécies e complexas relações ecológicas entre elas, estudos envolvendo ofidiofauna ainda são escassos, o que faz com que o entendimento dos processos responsáveis pela estruturação de suas comunidades ainda seja incipiente. No Brasil, vários trabalhos foram desenvolvidos na tentativa de explicitar os fenômenos responsáveis pelos padrões de ocorrência e interações das espécies de serpentes. Objetivando esclarecer quais os fatores que determinam os padrões observados e que afinidades (ecológicas e/ou históricas) as espécies compartilham, foi realizado estudo da taxocenose de serpentes da FLONA de Caxiuanã e áreas adjacentes, durante os anos de 2005 e 2006. Utilizou-se conjuntamente quatro métodos de amostragem (Procura Limitada por Tempo-PLT, Encontros Ocasionais-EO, Armadilhas de Interceptação e Queda-AIQ e Coletas por Terceiros-CT), em cinco áreas (IBAMA e Caquajó, no interior da FLONA de Caxiuanã; Enseada e dois pontos com influência antrópica: Marinaú e Mojuá, estando esses três últimos localizados em áreas adjacentes à FLONA. Foram registrados 378 espécimes distribuídos em cinco famílias, 35 gêneros e 50 espécies. Com os novos registros obtidos nesse estudo, o número de espécies de serpentes para a FLONA de Caxiuanã e áreas adjacentes passa de 63 para 69. Os métodos que apresentaram melhor desempenho em número de indivíduos foram PLT (199/378) e CT (159/378). EO (11/378) e AIQ (9/378) foram os métodos menos eficazes. A riqueza estimada (Jackknife 1), a partir de dados obtidos através de PLT, foi de 56 (+ ou – 4) espécies. O número de espécies estimado para as áreas preservadas foi maior que para áreas antropizadas. A composição das espécies de serpentes da área estudada apresentou maior similaridade com outras taxocenoses de áreas amazônicas. As espécies mais abundantes, acessadas através de PLT, foram Imantodes cenchoa, Corallus hortulanus e Leptodeira annulata. Quando todos os métodos foram considerados, Bothrops atrox, Imantodes cenchoa e Corallus hortulanus foram as espécies mais representadas. As áreas mais antropizadas, localizadas fora da FLONA (Marinaú e Mojuá), apresentaram menores abundância e riqueza de espécies em comparação com áreas protegidas, localizadas no interior da FLONA. Nove espécies foram consideradas potencialmente especialistas: Lachesis muta (pequenos mamíferos), Atractus schach (minhocas), Dipsas catesbyi (moluscos - lesmas), Helicops trivitatus e Hydrops triangularis (peixes), Siphlophis compressus (lagartos), Xenopholis scalaris, Taeniophallus brevirostris (anfíbios anuros) e Tantilla melanocephala (centopéias). Os itens mais acessados foram “lagartos”, “anfíbios anuros” e “pequenos mamíferos”. Serpentes com hábitos primária ou exclusivamente diurnas prevaleceram na comunidade analisada. A ausência de sazonalidade reprodutiva foi característica da maioria das espécies e isso se deve, muito provavelmente, à pouca diferença na temperatura ao longo do ano. A taxocenose de serpentes da FLONA de Caxiuanã e áreas adjacentes está, basicamente, formada por grupos contendo espécies onde, em geral, hábitos diários e de dieta estão sobrepostos. Além dos diversos fatores ecológicos, também fatores históricos, como adaptações morfológicas das espécies, têm grande influência na composição da taxocenose analisada. A grande dificuldade na realização de estudos de comunidades de serpentes está na escassez de dados das espécies, portanto torna-se imperioso que estudos de Ecologia e História Natural continuem sendo exaustivamente conduzidos em uma mesma localidade, objetivando a elucidação dos padrões de respostas aos diversos fatores relacionados à existência das espécies nos diferentes biomas.

Serpentes da Bacia Petrolífera de Urucu, município de Coari, Amazonas, Brasil

Um inventário estruturado de serpentes foi realizado na Base Operacional Geólogo Pedro de Moura (BOGPM), localizada na Bacia Petrolífera de Urucu, Município de Coari, Amazonas, nos anos de 2003, 2004 e 2007. Nas quatro expedições realizadas (51 dias de coleta) foram registradas 47 espécies de serpentes, pertencentes a sete famílias e 33 gêneros. Foram utilizados quatro métodos complementares de amostragem de serpentes: armadilha de interceptação e queda, encontros ocasionais, procura limitada por tempo a pé e procura limitada por tempo de carro. Das 47 espécies coletadas, Liophis reginae (n= 14), Philodryas viridissima (n= 9), Philodryas boulengeri (n= 7) e Oxybelis fulgidus (n= 7) foram as mais abundantes em toda região. O maior número de espécies e espécimes foi registrado pela procura limitada por tempo de carro (52,8%). Estudos anteriores indicam que as localidades ao sul do Rio Amazonas (como região Leste do Pará, Usina Hidrelétrica de Tucuruí, Estado do Pará, e de Samuel, Estado de Rondônia) apresentam maior riqueza quando comparadas às regiões ao norte do Amazonas (como Município de Manaus, Reserva do INPA-WWF e Usina Hidrelétrica de Balbina, Estado do Amazonas). Desta forma, é possível inferir que o levantamento das serpentes da região de Urucu ainda não esteja completo, sendo necessário um maior esforço de coleta para que novos registros sejam adicionados para a área.

Estudo de populações do psilídeo-de-concha Glycaspis brimblecombei (Hemiptera: Psyllidae) e de seu parasitóide Psyllaephagus bliteus (Hymenoptera: Encyrtidae) em floresta de Euclyptus camaldulensis por dois métodos de amostragem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comportamento e dano de tripes na cultura do milho (Zea mays L.)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of the sample area in the variability of losses in the mechanical harvesting of soybeans

The mechanical harvesting is an important stage in the production process of soybeans and, in this process; the loss of a significant number of grains is common. Despite the existence of mechanisms to monitor these losses, it is still essential to use sampling methods to quantify them. Assuming that the size of the sample area affects the reliability and variability between samples in quantifying losses, this paper aimed to analyze the variability and feasibility of using different sizes of sample area (1, 2 and 3 m²) in quantifying losses in the mechanical harvesting of soybeans. Were sampled 36 sites and the cutting losses, losses by other mechanisms of the combine and total losses were evaluated, as well as the water content in seeds, straw distribution and crop productivity. Data were subjected to statistical analysis (descriptive statistics and analysis of variance) and Statistical Control Process (SCP). The coefficients of variation were similar for the three frames available. Combine losses showed stable behavior, whereas cutting losses and total losses showed unstable behavior. The frame size did not affect the quantification and variability of losses in the mechanical harvesting of soybeans, thus a frame of 1 m² can be used for determining losses.

The social wasp fauna of a riparian forest in southeastern Brazil (hymenoptera, vespidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do ambiente alterado no epitélio da escama, nas brânquias e na alimentação de Prochilodus lineatus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cuidadores informais de idosos em pós-operatório de cirurgia de fêmur proximal: prevenção de novas quedas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Non-volant mammals from Nucleo Santa Virginia, Serra do Mar State Park, Sao Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Orgilinae (Hymenoptera: Braconidae) en cultivo de café de Cravinhos, SP, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sperm head morphometry in ejaculates of adult marmosets (Callithrix jacchus): a model for studying sperm subpopulations and among-donor variations

In humans and other mammals, sperm morphology has been considered one of the most important predictive parameters of fertility. The objective was to determine the presence and distribution of sperm head morphometric subpopulations in a nonhuman primate model (Callithrix jacchus), using an objective computer analysis system and principal component analysis (PCA) methods to establish the relationship between the subpopulation distribution observed and among-donor variation. The PCA method revealed a stable number of principal components in all donors studied, that represented more than 85% of the cumulative variance in all cases. After cluster analysis, a variable number (from three to seven) sperm morphometric subpopulations were identified with defined sperm dimensions and shapes. There were differences in the distribution of the sperm morphometric subpopulations (P < 0.001) in all ejaculates among the four donors analyzed. In conclusion, in this study, computerized sperm analysis methods combined with PCA cluster analyses were useful to identify, classify, and characterize various head sperm morphometric subpopulations in nonhuman primates, yielding considerable biological information. In addition, because all individuals were kept in the same conditions, differences in the distribution of these subpopulations were not attributed to external or management factors. Finally, the substantial information derived from subpopulation analyses provided new and relevant biological knowledge which may have a practical use for future studies in human and nonhuman primate ejaculates, including identifying individuals more suitable for assisted reproductive technologies. (c) 2012 Elsevier Inc. All rights reserved.

The release of zinc and lead from mine tailings

Mining and processing of metal ores are important causes of soil and groundwater contamination in many regions worldwide. Metal contaminations are a serious risk for the environment and human health. The assessment of metal contaminations in the soil is therefore an important task. A common approach to assess the environmental risk emanating from inorganic contaminations to soil and groundwater is the use of batch or column leaching tests. In this regard, the suitability of leaching tests is a controversial issue. In the first part of this work the applicability and comparability of common leaching tests in the scope of groundwater risk assessment of inorganic contamination is reviewed and critically discussed. Soil water sampling methods (the suction cup method and centrifugation) are addressed as an alternative to leaching tests. Reasons for limitations of the comparability of leaching test results are exposed and recommendations are given for the expedient application of leaching tests for groundwater risk assessment. Leaching tests are usually carried out in open contact with the atmosphere disregarding possible changes of redox conditions. This can affect the original metal speciation and distribution, particularly when anoxic samples are investigated. The influence of sample storage on leaching test results of sulfide bearing anoxic material from a former flotation dump is investigated in a long-term study. Since the oxidation of the sulfide-bearing samples leads to a significant overestimation of metal release, a feasible modification for the conduction of common leaching tests for anoxic material is proposed, where oxidation is prevented efficiently. A comparison of leaching test results to soil water analyzes have shown that the modified saturation soil extraction (SSE) is found to be the only of the tested leaching procedures, which can be recommended for the assessment of current soil water concentrations at anoxic sites if direct investigation of the soil water is impossible due to technical reasons. The vertical distribution and speciation of Zn and Pb in the flotation residues as well as metal concentrations in soil water and plants were investigated to evaluate the environmental risk arising from this site due to the release of metals. The variations in pH and inorganic C content show an acidification of the topsoil with pH values down to 5.5 in the soil and a soil water pH of 6 in 1 m depth. This is due to the oxidation of sulfides and depletion in carbonates. In the anoxic subsoil pH conditions are still neutral and soil water collected with suction cups is in equilibrium with carbonate minerals. Results from extended x-ray absorption fine-structure (EXAFS) spectroscopy confirm that Zn is mainly bound in sphalerite in the subsoil and weathering reactions lead to a redistribution of Zn in the topsoil. A loss of 35% Zn and S from the topsoil compared to the parent material with 10 g/kg Zn has been observed. 13% of total Zn in the topsoil can be regarded as mobile or easily mobilizable according to sequential chemical extractions (SCE). Zn concentrations of 10 mg/L were found in the soil water, where pH is acidic. Electron supply and the buffer capacity of the soil were identified as main factors controlling Zn mobility and release to the groundwater. Variable Pb concentrations up to 30 µg/L were observed in the soil water. In contrast to Zn, Pb is enriched in the mobile fraction of the oxidized topsoil by a factor of 2 compared to the subsoil with 2 g/kg Pb. 80% of the cation exchange capacity in the topsoil is occupied by Pb. Therefore, plant uptake and bioavailability are of major concern. If the site is not prevented from proceeding acidification in the future, a significant release of Zn, S, and Pb to the groundwater has to be expected. Results from this study show that the assessment of metal release especially from sulfide bearing anoxic material requires an extensive comprehension of leaching mechanisms on the one hand and on weathering processes, which influence the speciation and the mobility of metals, on the other hand. Processes, which may change redox and pH conditions in the future, have to be addressed to enable sound decisions for soil and groundwater protection and remediation.

Einsatz eines Aerosolmassenspektrometers während der CYPHEX-Kampagne und zur Methodenentwicklung einer Echtzeitquantifizierung gasförmiger Amine

Atmosphärische Aerosole haben einen starken Einfluss auf das Klima, der bisher nur grundlegend verstanden ist und weiterer Forschung bedarf. Das atmosphärische Verhalten der Aerosolpartikel hängt maßgeblich von ihrer Größe und chemischen Zusammensetzung ab. Durch Reflexion, Absorption und Streuung des Sonnenlichtes verändern sie den Strahlungshaushalt der Erde direkt und durch ihre Einflussnahme auf die Wolkenbildung indirekt. Besonders gealterte, stark oxidierte organische Aerosole mit großem Sauerstoff-zu-Kohlenstoff-Verhältnis wirken als effektive Wolkenkondensationskeime. Neben primären Aerosolpartikeln, die direkt partikelförmig in die Atmosphäre gelangen, spielen sekundäre Aerosolpartikel eine große Rolle, die aus Vorläufergasen in der Atmosphäre entstehen. Aktuelle Forschungsergebnisse legen nahe, dass kurzkettige aliphatische Amine bei Nukleationsprozessen beteiligt sind und somit die Partikelneubildung vielerorts mitsteuern. Um die Rolle von Aminen in der Atmosphäre besser erforschen und industrielle Emissionen kontrollieren zu können, bedarf es einer zuverlässigen Methode zur Echtzeitquantifizierung gasförmiger Amine mit hoher Zeitauflösung und niedriger Nachweisgrenze.rnDas hochauflösende Flugzeit-Aerosolmassenspektrometer (HR-ToF-AMS) bietet die Möglichkeit, atmosphärische Partikel in Echtzeit zu analysieren. Dabei werden Größe, Menge und grundlegende chemische Zusammensetzung erfasst. Anorganische Aerosolbestandteile können eindeutig zugeordnet werden. Es ist jedoch kaum möglich, einzelne organische Verbindungen in den komplizierten Massenspektren atmosphärischer Aerosole zu identifizieren und quantifizieren.rnIn dieser Arbeit wird atmosphärisches Aerosol untersucht, das im Westen Zyperns während der CYPHEX-Kampagne mit einem HR-ToF-AMS gemessen wurde. An diesem Standort ist vor allem stark gealtertes Aerosol vorzufinden, das aus Zentral- und Westeuropa stammt. Lokale Einflüsse spielen fast keine Rolle. Es wurde eine durchschnittliche Massenkonzentration von 10,98 μg/m3 gefunden, zusammengesetzt aus 57 % Sulfat, 30 % organischen Bestandteilen, 12 % Ammonium, < 1 % Nitrat und < 1 % Chlorid, bezogen auf das Gewicht. Der Median des vakuum-aerodynamischen Durchmessers betrug 446,25 nm. Es wurde sehr acides Aerosol gefunden, dessen anorganische Bestandteile weitgehend der Zusammensetzung von Ammoniumhydrogensulfat entsprachen. Tag-Nacht-Schwankungen in der Zusammensetzung wurden beobachtet. Die Sulfatkonzentration und die Acidität zeigten tagsüber Maxima und nachts Minima. Konzentrationsschwankungen an Nitrat und Chlorid zeigten einen weniger ausgeprägten Rhythmus, Maxima fallen aber immer mit Minima der Sulfatkonzentration, Aerosolacidität und Umgebungstemperatur zusammen. Organische Aerosolbestandteile entsprachen stark gealtertem, schwerflüchtigem oxidiertem organischem Aerosol. Es wurde eine interne Mischung der Partikel beobachtet, die ebenfalls meist bei alten Aerosolen auftritt.rnUm mit dem HR-ToF-AMS auch einzelne organische Verbindungen identifizieren und quantifizieren zu können, wurde eine Methode entwickelt, mit der man Amine der Gasphase selektiv in künstlich erzeugte Phosphorsäurepartikel aufnimmt und so für die HR-ToF-AMS-Messung zugänglich macht. Dadurch kombiniert man die Vorteile der Online-Messung des HR-ToF-AMS mit den Vorteilen klassischer Offline-Probenahmen. So können in Echtzeit sehr einfache Massenspektren gemessen werden, in denen störende Komponenten abgetrennt sind, während die Analyten eindeutig identifiziert werden können. Systeme dieser Art wurden GTRAP-AMS (Gaseous compound TRapping in Artificially-generated Particles – Aerosol Mass Spectrometry) genannt. Kalibrierungen für (Mono)Methylamin, Dimethylamin, Trimethylamin, Diethylamin und Triethylamin ergaben Nachweisgrenzen im ppt-Bereich bei einer Zeitauflösung von 3 min. Kammerexperimente zur Aminemission von Pflanzen zeigten eine gute Übereinstimmung des neu entwickelten Systems mit einer Gasdiffusionsabscheider-Offline-Probenahme und anschließender ionenchromatographischer Analyse. Beide Methoden zeigten Reaktionen der Pflanzen auf eine Veränderung der Lichtverhältnisse, während erhöhte Ozonkonzentrationen die Aminemission nicht veränderten. Die GTRAP-AMS-Methode eignet sich bereits für die Messung von Umgebungsluftkonzentrationen an einigen Orten, für die meisten Orte reicht die Nachweisgrenze allerdings noch nicht aus. Die Technik könnte bereits zur Echtzeitkontrolle industrieller Abgasemissionen eingesetzt werden.

Estimating the Size of the Homeless Population in Budapest

Since 1990, the issue of homelessness has become increasingly important in Hungary as a result of economic and structural changes. Various suggestions as to how the problem may be solved have always been preceded by the question "How many homeless people are there?" and there is still no official consensus as to the answer. Counting of the homeless is particularly difficult because of the bias in the initial sampling frame due to two factors that characterise this population: the definition of homelessness, and its 'hidden' nature. David aimed to estimate the size of the homeless population of Budapest by using two non-standard sampling methods: snowball sampling and the capture-recapture method. Her calculations are based on three data sets: one snowball data set and two independent list data sets. These estimators, supported by other statistical data, suggest that in 1999 there were about 8000-10000 homeless people in Budapest.

Carbon in the Peatlands in the Great Lakes Region

Peatlands cover only ~3% of the global land area, but store ~30% of the worlds' soil carbon. There are many different peat types that store different amounts of carbon. Most inventories of carbon storage in northern peatlands have been conducted in the expansive Sphagnum dominated peatlands. Although, northern white cedar peatlands (NW cedar, Thuja occidentalis L.) are also one of the most common peatland types in the Great Lakes Region, occupying more than 2 million hectares. NW cedar swamps are understudied, due in part to the difficulties in collection methods. General lack of rapid and consistent sampling methods has also contributed in a lack of carbon stock quantification for many peatlands. The main objective of this thesis is to quantify: 1) to evaluate peat sampling methods 2) the amount of C-stored and the rates of long-term carbon accumulation in NW cedar peatlands. We sampled 38 peatlands separated into four categories (black ash, NW cedar swamp, sedge, and Sphagnum) during the summers of 2011/2012 across northern MN and the Upper Peninsula of MI. Basal dates of peat indicate that cedar peatlands were between 1970-7790 years old. Cedar peatlands are generally shallower than Sphagnum peat, but due to their higher bulk density, hold similar amounts of carbon with our sites averaging ~800 MgC ha-1. We estimate that NW cedar peatlands store over 1.7 Gt of carbon in the Great Lakes Region. Each of the six methods evaluated had a different level of accuracy and requires varying levels of effort and resources. The depth only method and intermittent sampling method were the most accurate methods of peatland sampling.