Evaluation of fitness components in strains of Drosophila mulleri carrying different genotypes for an esterase

Several fitness components in strains of Drosophila mulleri carrying the slow or the fast alleles for the major beta esterase (esterase-4) found in this species, as well as in heterozygous flies in which the slow or fast alleles came from one of the parents, were evaluated. Twelve components were analysed including longevity of both virgins and mated males and females, productivity, viability, including the egg-larva, egg-pupa, egg-imago and pupa-imago periods. These parameters were used to estimate the total fitness for each genotype. The best score was reached by individuals having the Est-4(S)/Est-4(S) genotype (scored at 1.000), followed by a fitness value of 0.892 presented by the Est-4(F)/Est-4(S) genotype (with the fast allele from maternal origin), 0.863 for the Est-4(F)/Est-4(F) and 0.842 for the Est-4(S)/Est-4(F) genotypes (with Est-4(F) maternal origin). These results suggested a higher relative adaptability of the Est-4(S)/Est-4(S) genotype followed by the Est-4(F)/Est-4(S) hybrid that possessed the allele Est-4(S) of maternal origin, which was incompatible with predictions of neutral polymorphism.

Ability of bacteriophages isolated from different sources to reduce Salmonella enterica serovar enteritidis in vitro and in vivo

Salmonella enterica serovar Enteritidis-lysing bacteriophages isolated from poultry or human sewage sources were used to reduce Salmonella Enteritidis in vitro and in experimentally infected chicks. Cocktails of 4 different bacteriophages obtained from commercial broiler houses (CB4O) and 45 bacteriophages from a municipal wastewater treatment plant (WT45O) were evaluated. In experiment 1, an in vitro crop assay was conducted with selected bacteriophage concentrations (105 to 101 pfu/mL) to determine ability to reduce Salmonella Enteritidis in the simulated crop environment. Following 2 h at 37 degrees C, CB40 or WT45O reduced Salmonella Enteritidis recovery by 1.5 or 5 log, respectively, as compared with control. However, CB40 did not affect total SE recovery after 6 h, whereas WT45O resulted in up to a 6-log reduction of Salmonella Enteritidis. In experiment 2, day-of-hatch chicks were challenged orally with 3 x 103 cfu /chick Salmonella Enteritidis and treated cloacally with 1 X 109 WT45O pfu/chick I h postchallenge. One hour later, chicks were treated or not with a commercially available probiotic (Floramax-B11). Both treatments significantly reduced Salmonella Enteritidis recovery from cecal tonsils at 24 h following vent lip application as compared with controls, but no additive effect was observed with the combination of bacteriophages and probiotic. In experiment 3, day-of-hatch chicks were challenged orally with 9 x 103 cfu/chick Salmonella Enteritidis and treated via oral gavage with I X 108 CB40 pfu/chick, 1.2 x 108 WT45O pfu/chick, or a combination of both, I h postchallenge. All treatments significantly reduced Salmonella Enteritidis recovered from cecal tonsils at 24 h as compared with untreated controls, but no significant differences were observed at 48 h following treatment. These data suggest that some bacteriophages can be efficacious in reducing SE colonization in poultry during a short period, but with the bacteriophages and methods presently tested, persistent reductions were not observed.

PATHOGENIC OR POTENTIALLY PATHOGENIC BACTERIA AS CONTAMINANTS OF FRESH-WATER FROM DIFFERENT SOURCES IN ARARAQUARA, BRAZIL

The microbiological quality of various fresh waters in the Araraquara region, state of São Paulo, Brazil was investigated. Ninety-nine water samples were taken from rivers, reservoirs, artesian and non-artesian wells, springs and tap waters, and these waters were analysed using: plate counts of heterotrophic microorganisms (per 1 ml); Most Probable Number (MPN) of fecal coliforms and E. coli (per 100 ml); tests for presence of Salmonella, Shigella, Yersinia, the E. coli pathogens of classes EPEC, ETEC and EIEC and Mycobacterium, Shigella, Yersinia and enteroinvasive E. coli (EIEC) were not isolated. The other types of microorganisms were isolated in varying proportions. We conclude that the waters investigated represent a potential microbiological health risk.

Evaluation of different solvent on paprika oleoresin extraction

The best solvent for paprika oleoresin extraction was determined by comparison with a commercial oleoresin. Pigment composition was determined by HPLC. The solvent system hexane/acetone/isopropilic alcohol (3:2:1) shown to be the best for extraction of the oleoresin, giving the best yield and colour value and a chromatographic pattern identical to that of the commercial oleoresin.

Evaluation of Different Methods of Optical Impression Making on the Marginal Gap of Onlays Created with CEREC 3D

Objectives: This study evaluated the marginal gaps on several surfaces of onlays created with the Cerec 3D system using one intraoral and two extraoral optical impression methods. Methods: A human molar (#19) was mounted with its adjacent teeth on a typodont (Frasaco) and prepared for a MODL onlay. The typodont was assembled in the mannequin head in order to simulate clinical conditions. The same operator took 36 individual optical impressions using a CEREC 3D camera. For group 1 (IP), a thin layer of titanium dioxide powder (CEREC powder-VITA) was applied directly onto the surface of the preparation for imaging (n=12). For group 2 (EP), a sectional impression was taken with hydrocolloid Identic Syringable (Dux Dental), a die made with polyvinylsiloxane KwikkModel Scan (R-dental Dentalerzeugnisse GmbH) and powdered with titanium dioxide for imaging (n=12). For group 3 (ES), a sectional impression was taken with PVS and a sectional stock tray, a die fabricated in stone (Diamond die- HI-TEC Dental Products) and the die being imaged without powdering (n=12). One operator designed and machined the onlays in Vita Blocks Mark II for Cerec (VITA) using a CEREC 3D. The marginal gaps (pm) were measured with an optical microscope (50x) at 12 points, three on each surface of the MODL. The results were analyzed by two-way ANOVA/Tukey's (p=0.05). Results: The overall mean marginal gaps (mu m) for the three methods were: IP=111.6 (+/- 34.0); EP=161.4 (+/- 37.6) and ES=116.8 (+/- 42.3). IP and ES were equal, but both were significantly less than EP. The pooled mean marginal gaps (mu m) for the occlusal = 110.5 (+/- 39) and lingual = 111.5 (+/- 30.5) surfaces were equivalent and significantly less than the distal = 136.5 (+/- 42.5) and mesial = 161.1 (+/- 43.3). Conclusion: The marginal gap of CEREC 3D onlay restorations was not different when the optical impression was taken intraorally vs extraorally using a stone cast that does not require powdering. The lingual and occlusal surfaces showed the lowest gaps.

Evaluation of different rhodium modifiers and coatings on the simultaneous determination of As, Bi, Pb, Sb, Se and of Co, Cr, Cu, Fe, Mn in milk by electrothermal atomic absorption spectrometry

Different kinds of modifiers and coatings on the integrated platform of transversely heated graphite atomizer (THGA) have been tested for the simultaneous determination of two group of elements: the first, the more volatile, formed by arsenic, bismuth, lead, antimony and selenium; the second, the less volatile, formed by cobalt, chromium, cupper, iron and manganese in milk by electrothermal atomic absorption spectrometry. Different Rh-modifiers were studied, such as Rh-coated platforms (Rh), carbide plus rhodium coated platforms (W-Rh, Zr-Rh), carbide-coated platforms (W and Zr) with co-injection of RhCl3, solutions and uncoated platforms with injection of solutions of Pd(NO3)(2), Mg(NO3)(2), and RhCl3. Milk samples were diluted 1:10 in 1.0% HNO3 and injected into the tube. The mass of modifier deposited and co-injected in the tube and the use of end capped tubes were also evaluated in order to improve the electrothermal behavior of analytes. Integrated platform pretreated with W plus co-injection RhCl3 for first group and pretreated with W-Rh for second group were elected. For 20 mu L injected samples the analytical curves in the 5.0-20.0 mu g L-1 concentration range have good linear correlation coefficients (r > 0.998). Relative standard deviations (n = 12) are < 6% and the calculated characteristic masses are between 5 pg and 62 pg.

Microleakage evaluation of pit and fissure sealants done with different procedures, materials, and laser after invasive technique

This study evaluated the microleakage of pit and fissure sealants after different surface preparation (invasive technique and laser irradiation) and the use of different materials (fluoride resin-filled sealant, resin-modified glass ionomer cement and adhesive system). Eighty-four pre molars were used in this study, which were divided into seven groups. After the accomplishment of the different treatments, these were submitted to thermocycling process and assess for microleakage by examination under an epifluorescent microscope and scored zero to seven. Two specimens of each group were observed under scanning electron microscope (SEM). The results showed that laser irradiation did not lessen microleakage in pit and fissures when using a filled-resin sealant with fluoride or a resin-modified glass ionomer cement. The use of laser irradiation and adhesive system, followed by a resin-filled sealant with fluoride, showed the lowest microleakage scores in pit and fissures. Comparing this group to the resin-modified glass ionomer cement group, there was statistical significance. The use of a adhesive system decreased microleakage when using a fluoride resin-filled sealant with or without previous laser irradiation; although it was not statistically significant.

Evaluation of cutting patterns produced with air-abrasion systems using different tip designs.

This study assessed cavity preparations produced with different air abrasion tip parameters. Twelve test groups of extracted teeth were prepared to evaluate the parameters of 80 degrees or 45 degrees nozzle angles and 0.38 or 0.48 mm inner tip diameters. All other factors were held constant. A device was made to hold the specimen and air abrasion handpiece that standardized the distance and position relative to the tooth and time of application. The cavities were evaluated by assessing the rounding of the cavosurface margins and cavity floor. Measurements of cavosurface angles and the angle of concavity were made at the deepest portion of the abraded surface using scanning electron micrographs. The cavosurface angles were compared using paired t-test, and the effects of the tip design parameters were analyzed by ANOVA and Duncan's Multiple Range test. From the cavity patterns found in this study, the authors suggest that 80 degrees angle tips are more appropriate than 45 degrees angle tips for making narrow, deep cuts for preventive resin restorations. Conversely, when shallow preparations are needed, as in the case of Class V cavity preparations, cutting patterns of 45 degrees angle tips are more suitable.

Evaluation of naturally and artificially aged seeds of Phaseolus vulgaris L.

Seed ageing is natural phenomenon that occurs in all seeds, including those stored in dry and low temperature rooms. Phaseolus vulgaris L. cv. 'Carioca' seeds harvested in five different years were stored in at 15°C. Seed samples were germinated and evaluated according to The Brazilian Rules for Testing Seeds. The newest seed sample was submitted to artificial ageing. Small (∼1g) samples of all materials (naturally and artificially aged) were ground and proteins extracted. Equal quantities of protein were loaded onto the gels and electrophoresis carried out. Although seeds submitted to 24, 48, 72 and 96 hours of artificial ageing did not show any statistical difference (5%) in relation to unaged seeds in physiological parameters related to emergence, some statistically different parameters related to dry matter and length of shoots and roots occurred. A 24 h of artificial ageing at 41°C improved these factors. Protein patterns were changed after 72 h of artificial ageing and naturally aged seeds showed alterations after two years storage at 15°C. Aged seeds, naturally and artificially, had decreasing germination, vigour, and changes in the characteristic banding pattern of proteins. Physiological parameters and electrophoresis examination showed that for naturally aged seeds physiological parameters were more sensitive while artificially aged seeds, (41°C/100% RH), had electrophoretic profiles that were more efficient for seed lot discrimination.

Calcium hydroxide root canal dressing. Histopathological evaluation of periapical repair at different time periods.

The objective of this study was to evaluate periapical and apical repair using calcium hydroxide root canal dressings for different lengths of times in teeth with induced chronic periapical lesions. A total of 61 root canals of maxillary and mandibular premolars from 4 dogs were used. After mechanical preparation of the root canals using the crown-down technique, and 5.25% NaOCl as irrigating solution, the apical foramen was enlarged in all cases. A calcium hydroxide root canal dressing was applied. The control group did not receive a root canal dressing. The animals were killed at 7, 15 or 30 days. After histological preparation, serial sections were stained with hematoxylin-eosin and Mallory's trichrome. The best histopathological results occurred at 15 and 30 days, and the worst results occurred at 7 days and in the control group.

Economic evaluation of Piaractus mesopotamicus juvenile production in different rearing systems

In this study, the costs and gross income related to the production of pacu Piaractus mesopotamicus juveniles were evaluated. This evaluation took into consideration a semi-intensive rearing, with direct stocking of the larvae into fertilized ponds (IL 0), or an initial intensive larviculture system, in which the larvae were fed in the laboratory for 3 (IL 3), 6 (IL 6), or 9 days (IL 9) before being transferred to the ponds. After 45 days of rearing, a gradual increase in production costs was observed as intensive larviculture time increased. Gross income also increased due to better survival rates (11.0, 25.3, 45.4, and 54.0% for IL 0, IL 3, IL 6, and IL 9, respectively). Therefore, increased profits were obtained under intensive larviculture (US$ 0.27, US$ 6.07, US$ 11.99, and US$ 13.16 per one thousand larvae in treatments IL 0, IL 3, IL 6, and IL 9, respectively). In a larger scale production simulation, the results obtained with initial intensive larviculture also showed evident economic advantages, confirming the feasibility of this system in comparison with the direct stocking of larvae in ponds for the production of pacu juveniles. © 2004 Elsevier B.V. All rights reserved.