Construção de um aparato experimental para monitoramento in situ da deposição de filmes finos de titânio por magnetron sputtering

The technique of surface coating using magnetron sputtering is one of the most widely used in the surface engineering, for its versatility in obtaining different films as well as in the micro / nanometric thickness control. Among the various process parameters, those related to the active species of the plasma are of the most fundamental importance in the mechanism and kinetics of deposition. In order to identify the active species of the plasma, parameters such as gas flow, pressure and density of electric power were varied during titanium coating on glass substrate. By flowing argon gas of 10, 20, 30, 40 and 50 sccm (cubic centimeters per minute) for each gas flow a sequential scan of the electric current of 0.10, 0.20, 0.30, 0.40 , 0.50 A. The maximum value of 0.50 A was chosen based both on literature data and on limitations of the equipment. The monitoring of plasma species present during the deposition was carried out in situ by the technique of optical emission spectroscopy (OES) through the spectrometer Ocean Optics USB2000 Series. For this purpose, an apparatus was developed to adapt the OES inside the plasma reactor to stay positioned closest to the target. The radiations emitted by the species were detected by an optical fiber placed behind the glass substrate and their intensities as a function of wavelength were, displayed on a monitor screen. The acquisition time for each condition of the plain parameters was related to the minima of spectral lines intensities due to the film formed on the substrate. The intensities of different emission lines of argon and titanium were then analyzed as a function of time, to determine the active species and estimate the thickness of the deposited films. After the deposition, the coated glasses thin films were characterized by optical transmittance through an infrared laser. It was found that the thickness and deposition rate determined by in situ analysis were consistent with the results obtained by laser transmittance

Redução aluminotérmica do óxido de tântalo usando uma tocha de plasma como ignitor

In this work was used a plasma torch of non transferred arc with argon as work gas, using a power supply with maximum DC current of 250 A and voltage of 30 V to activate the plasma and keep it switched on. The flame temperature was characterized by optical emission spectroscopy, through Boltzmann-plot-method. The torch has been used like igniter in the aluminothermic reduction of the mixture tantalum oxide and aluminum, seeking to obtain metallic tantalum. In heating of the reagents only one particle will be considered to study interactions between plasma-particle, seeking to determinate its fusion and residence time. The early powders were characterized by laser granulometry, scanning electron microscopy (SEM) and X-ray diffraction analysis. The final product of this reaction was characterized by SEM and X-ray diffraction. Crystallite size was calculated by the Scherrer equation and microdeformation was determined using Willamsom-Hall graph. With Rietveld method was possible to quantify the percentile in weight of the products obtained in the aluminothermic reaction. Semi-quantitative chemical analysis (EDS) confirmed the presence of metallic tantalum and Al2O3 as products of the reduction. As was waited the particle size of the metallic tantalum produced, presents values in nanometric scale due the short cooling time of those particles during the process

Pré-concentração de cádmio com Saccharomyces cerevisiae e determinação em águas fluviais usando espectrometria de emissão óptica com plasma indutivamente acoplado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Placas de aço inoxidável 316L aplicadas no reparo de fratura experimental diafisária do rádio e ulna de cães

O objetivo do presente trabalho foi o de estudar a resistência à corrosão em placas de aço inoxidável 316L, com diferentes tipos de acabamento e tratamento superficial, e a possível interferência dessa reação corrosiva na consolidação óssea. Utilizaram-se placas semi-acabadas, polidas, tratadas com jatos de microesferas de vidro e passivadas, as quais foram aplicadas na epífise distal do rádio de cães. Foram utilizados 12 animais, divididos em dois grupos, nos quais, após osteotomia bilateral do rádio e ulna, foram realizadas osteossínteses do rádio, totalizando 24 procedimentos. Avaliou-se a evolução clínica e radiográfica das regiões que receberam os implantes aos 30, 60, 90, 180, 240 e 360 dias. Os animais do grupo 1 (GI) foram sacrificados aos 180 dias e os do GII aos 360 dias para estudo histológico e de microscopia eletrônica de varredura do local da osteotomia sob a região dos implantes metálicos e para estudo da resistência à corrosão no organismo, pelos implantes metálicos, por meio de análises química e metalográfica (microscopia óptica e eletrônica de varredura e espectroscopia de espalhamento de energia por raios X). Os animais recuperaram a função dos membros operados 24 horas após a cirurgia. Radiograficamente, verificou-se a consolidação óssea em todos os animais. Macro e microscopicamente não foram observados sinais de corrosão nos implantes metálicos, exceto em uma placa passivada, aplicada no rádio esquerdo de um animal, na qual a corrosão foi detectada pela microscopia óptica e eletrônica de varredura. Este estudo permite concluir que as placas de aço inoxidável 316L, independente do acabamento superficial a que foram submetidas, não sofreram corrosão ou reações adversas e foram efetivas no tratamento das fraturas experimentais do rádio e ulna de cães.

Tributação, finanças públicas e política fiscal: uma análise sob a óptica do direito e economia

In the Brazilian legal scenario, the study of taxation has traditionally been restricted to positivist analysis, concerned with investigating the formal aspects of the tax legal rule. Despite its relevance to the formation of the national doctrine of tax, such formalist tradition limits the discipline, separating it from reality and the socioeconomic context in which the Tax Law is inserted. Thus, the proposal of the dissertation is to examine the fundamentals and nature of taxation and tax legal rules from the perspective of Law and Economics (Economic Analysis of Law). For this purpose, the work initially reconnects the Tax Law and Science of Finance (or Public Finance) and Fiscal Policy, undertaking not only a legal analysis, but also economic and financial analysis of the theme. The Economics of Public Sector (or Modern Public Finance) will contribute to the research through topics such as market failures and economic theory of taxation, which are essential to an economic approach to Tax Law. The core of the work lies in the application of Law and Economics instruments in the study of taxation, analyzing the effects of tax rules on the economic system. Accordingly, the dissertation examines the fundamental assumptions that make up the Economic Analysis of Law (as the concept of economic efficiency and its relation to equity), relating them to the tax phenomenon. Due to the nature of the Brazilian legal system, any worth investigation or approach, including Law and Economics, could not pass off the Constitution. Thus, the constitutional rules will serve as a limit and a prerequisite for the application of Law and Economics on taxation, particularly the rules related to property rights, freedom, equality and legal certainty. The relationship between taxation and market failures receives prominent role, particularly due to its importance to the Law and Economics, as well as to the role that taxation plays in the correction of these failures. In addition to performing a review of taxation under the approach of Economic Analysis of Law, the research also investigates the reality of Brazilian tax system, applying the concepts developed in relevant cases and issues to the national scene, such as the relationship between taxation and development, the compliance costs of taxation, the tax evasion and the tax enforcement procedure. Given the above, it is intended to lay the groundwork for a general theory of Economic Analysis of Tax Law, contextualizing it with the Brazilian tax system

Equalização neural aplicada a sistemas com modulação bidimensional em fibra óptica

Nowadays, optic fiber is one of the most used communication methods, mainly due to the fact that the data transmission rates of those systems exceed all of the other means of digital communication. Despite the great advantage, there are problems that prevent full utilization of the optical channel: by increasing the transmission speed and the distances involved, the data is subjected to non-linear inter symbolic interference caused by the dispersion phenomena in the fiber. Adaptive equalizers can be used to solve this problem, they compensate non-ideal responses of the channel in order to restore the signal that was transmitted. This work proposes an equalizer based on artificial neural networks and evaluates its performance in optical communication systems. The proposal is validated through a simulated optic channel and the comparison with other adaptive equalization techniques

Redução carbotérmica de TiO2 por descarga em cátodo oco

In this study we used the plasma as a source of energy in the process of carbothermic reduction of rutile ore (TiO2). The rutile and graphite powders were milled for 15 h and placed in a hollow cathode discharge produced by in order to obtain titanium carbonitride directly from the reaction, was verified the influence of processing parameters of plasma temperature and time in the synthesis of TiCN. The reaction was carried out at 600, 700 and 800˚C for 3 to 4 hours in an atmosphere of nitrogen and argon. During all reactions was monitored by plasma technique of optical emission spectroscopy (EEO) to check the active species present in the process of carbothermal reduction of TiO2. The powder obtained after the reactions were characterized by the techniques of X-ray diffraction (XRD) and scanning electron microscopy (SEM). The technique of EEO were detected in all reactions the spectra CO and NO, and these gas-phase resulting from the reduction of TiO2. The results of X-ray diffraction confirmed the reduction, where for all conditions studied there was evidence of early reduction of TiO2 through the emergence of intermediate oxides. In the samples reduced at 600 and 700˚C, there was only the phase Ti6O11, those reduced to 800˚C appeared Ti5O9 phases, and Ti6O11 Ti7O13, confirming that the carbothermal reduction in plasma, a reduction of the ore rutile (TiO2) in a series of intermediate titanium oxide (TinO2n-1) where n varies between 5 and 10

Diagnóstico de plasma de cátodo oco: análise da ação de plasma de argônio e Ar-H2 para a deposição de filmes finos de titânio em pós-descarga

Plasma DC hollow cathode has been used for film deposition by sputtering with release of neutral atoms from the cathode. The DC Plasma Ar-H2 hollow cathode currently used in the industry has proven to be effective in cleaning surfaces and thin film deposition when compared to argon plasma. When we wish to avoid the effects of ion bombardment on the substrate discharge, it uses the post-discharge region. Were generated by discharge plasma of argon and hydrogen hollow cathode deposition of thin films of titanium on glass substrate. The optical emission spectroscopy was used for the post-discharge diagnosis. The films formed were analyzed by mechanical profilometry technique. It was observed that in the spectrum of the excitation lines of argon occurred species. There are variations in the rate of deposition of titanium on the glass substrate for different process parameters such as deposition time, distance and discharge working gases. It was noted an increase in intensity of the lines of argon compared with the lines of titanium. Deposition with argon and hydrogen in glass sample observed a higher rate deposition of titanium as more closer the sample was in the discharge

Descarga em barreira dielétrica: construção de um reator DBD e caracterização mediante análises ópticas e elétricas do plasma produzido

The plasma produced by Dielectric Barrier Discharge (DBD) is a promising technique for producing plasma in atmospheric pressure and has been highlighted in several areas, especially in biomedical and textile industry, this is due to the fact that the plasma generated by DBD not reaches high temperatures, enabling use it for thermally sensitive materials. But still it is necessary the development of research related to understanding of the chemical, physical and biological interaction between the non-thermal plasma at atmospheric pressure with cells, tissues, organs and organisms. This work proposes to develop equipment DBD and characterize it in order to obtain a better understanding of the process parameters of plasma production and how it behaves under the parameters adopted in the process, such as distance, frequency and voltage applied between electrodes. For this purpose two techniques were used to characterize distinct from each other. The first was the method of Lissajous figures, this technique is quite effective and accurately for complete electrical characterization equipment DBD. The second technique used was Optical Emission Spectroscopy (EEO) very effective tool for the diagnosis of plasma with it being possible to identify the excited species present in the plasma produced. Finally comparing the data obtained by the two techniques was possible to identify a set of parameters that optimize the production when combined DBD plasma atmosphere in the equipment was built precisely in this condition 0.5mm-15kV 600Hz, giving way for further work

Monitoramento em tempo real de processos fermentativos por espectroscopia no infravermelho próximo (NIRS)

A chemical process optimization and control is strongly correlated with the quantity of information can be obtained from the system. In biotechnological processes, where the transforming agent is a cell, many variables can interfere in the process, leading to changes in the microorganism metabolism and affecting the quantity and quality of final product. Therefore, the continuously monitoring of the variables that interfere in the bioprocess, is crucial to be able to act on certain variables of the system, keeping it under desirable operational conditions and control. In general, during a fermentation process, the analysis of important parameters such as substrate, product and cells concentration, is done off-line, requiring sampling, pretreatment and analytical procedures. Therefore, this steps require a significant run time and the use of high purity chemical reagents to be done. In order to implement a real time monitoring system for a benchtop bioreactor, these study was conducted in two steps: (i) The development of a software that presents a communication interface between bioreactor and computer based on data acquisition and process variables data recording, that are pH, temperature, dissolved oxygen, level, foam level, agitation frequency and the input setpoints of the operational parameters of the bioreactor control unit; (ii) The development of an analytical method using near-infrared spectroscopy (NIRS) in order to enable substrate, products and cells concentration monitoring during a fermentation process for ethanol production using the yeast Saccharomyces cerevisiae. Three fermentation runs were conducted (F1, F2 and F3) that were monitored by NIRS and subsequent sampling for analytical characterization. The data obtained were used for calibration and validation, where pre-treatments combined or not with smoothing filters were applied to spectrum data. The most satisfactory results were obtained when the calibration models were constructed from real samples of culture medium removed from the fermentation assays F1, F2 and F3, showing that the analytical method based on NIRS can be used as a fast and effective method to quantify cells, substrate and products concentration what enables the implementation of insitu real time monitoring of fermentation processes

História da ciência como estratégia didática no ensino médio: um breve olhar de conteúdos da óptica

From a critique of aspects of the current teaching of physics, we propose in this paper an investigation into the conceptions of Nature of Science (NOS) submitted by students from the high school level, as well as the inclusion of discussions about some elements of NOS, through the History and Philosophy of Science, understanding them as facilitating strategy for more effective learning of Physics and, more specifically, the contents of optics. Based on the historical period corresponding to Greek antiquity to the mid-nineteenth century, built and applied a teaching unit to a high school class at the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) Ipanguaçu campus. Our teaching unit involved the reading and interpretation of texts with historical content, observation and assembling five experimental activities, among other activities. Data analysis occurred through questionnaires investigative applied before and after the completion of the teaching unit, as well as questionnaires for content present in the texts. Although not significant, the results indicated that the application of the teaching unit allowed the (re) construction of some conceptions about NOS targets students present in our work, and contribute to a better learning content and greater optical science approach and its nature

O ensino de óptica no nível fundamental: uma proposta de ensino aprendizagem contextualizada para a oitava série

This dissertation presents the investigation and possible interference in the current teaching of physics, specially of optics, in the eighth grade/ ninth year / fourth cycle of junior high school. The context of the current science teaching is also presented. Besides, the following aspects are discussed: the preparation of the eighth grade teachers, their professional needs, the pedagogical practices and the theoreticmethodological difficulties faced by them. Another important issue in Science Teaching, which is also discussed in this dissertation, is the need for an efficient scientific literacy so that the citizen may express value judgment about Science and Technology issues. The data about the context were gathered from questionaires answered by the teachers. In value of this information, lesson plans were elaborated and implemented. The goal was to point out alternatives for the development of a teaching-learning evaluation which would be both pleasant for the teachers in relation to the implemented methodology, end meaningful for the students by adding elements such as: interdisciplinary approach, contextualization and preparation by competences. Furthermore it was carried out a deeper analysis of the Brazilian curriculum references (LDB, DCN, PCN, RCB) and content aspects (concepts, procedures e attitudes) to be executed by that branch of human knowledge, aiming at a really Contextualized Science Teaching, qualified and pleasant for the eighth grade level. It is also presented in this paper the profile or the Professional which teach this level at state public schools in Russas, state of Ceará, Vale do Jaguaribe Region. The efficacy of the lesson plans were also analysed by using evaluation procedures with the eighth grade students of the following schools: CAIC Senador Carlos Jereissati and EEF Manuel Matoso Filho, from which the concepts acquired during the implementation of the classes became evident in the students

Estudo de coprólito da bacia sedimentar do Araripe por meios de espectroscopia FT-IR e difração de Raios-X

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Abordando o ensino de óptica através da construção de telescópios

A proposta deste trabalho é a construção artesanal de um telescópio refletor do tipo Newtoniano relacionando conteúdos abordados na disciplina de óptica, como a formação de imagens em lentes e espelhos, aberrações esféricas e cromáticas, interferência e difração, com cada fase do processo de construção. Com o aparelho construído é possível abordar a fotografia lunar e planetária com alta resolução e sua utilização por alunos do curso de Licenciatura em Física já demonstra ser um grande incentivo à contemplação do céu e à compreensão de muitos fenômenos físicos, com ocorrências de eclipses, formação das marés, estações do ano, etc, que geralmente são pouco abordados nas escolas de Ensino Fundamental e Médio. de acordo com diagnóstico realizado pelos alunos de graduação em algumas escolas do município de Bauru, verificou-se que a única abordagem de astronomia é apenas em relação ao sistema solar, especificamente órbitas planetárias, nas disciplinas de Física ou Geografia. Além do telescópio, a utilização de animações produzidas por alunos de graduação também pode ser considerada como uma ferramenta eficiente no ensino de astronomia, principalmente para alunos de Ensino Fundamental.

Caracterização citoarquitetônica, neuroquímica e de aferência óptica do complexo parabraquial do sagui (Callithrix jacchus)

The parabrachial complex (PB) is an area of the brainstem responsible for the processing and transmission of essential physiologic information for the survival of the organisms. This region is subdivided in approximately nine subregions, considering morphology, cytoarchitectural and functional characteristic. Its neurons have an extensive network of connections with other regions of the nervous system. The objective in this work was to map the retinal projection to the PB and make a citoarchitectonic and neurochemical characterization of this region in the common marmoset (Callithrix jacchus), a primate of the New World. The retinal projections were mapped by anterograde transport of the choleric toxin subunit b (CTb). The citoarchitecture was described through the Nissl method, and the neurochemical characterization was made through immunohistochemical technique to the some neurotransmitters and neuroactives substances present in this neural center. In marmoset PB, in the coronal sections labeled by Nissl method, we found a similar pattern to that evidenced in other animal species. The immunoreactivity against CTb was verified in the PBMv in fibers/terminal, characterizing such as retinal innervations in this area. The immunohistochemical technique reveled that the PB contain cells, fibers and/or terminals immunoreactives to the neuronal nuclear protein, Choline acetyl transferase, nitric oxide synthase, serotonin, enkephalin, substance P, Calcium-binding proteins (calbindin, calretinin e parvalbumin), and glial fibrillary acidic protein. The histochemical technique reveled cells and fibers NADPH-diaphorase reactive. Each one of those substances presented a characteristic pattern of demarcation in PB, and some serve as specific markers of subregions