1000 resultados para Enginyeria de costes
Resumo:
Entrevista a D. José Antonio Martín Pereda con motivo de su nombramiento como Doctor Honoris Causa por la Universidad Politécnica de Cataluña en 2009.
Resumo:
En este proyecto hemos realizado un análisis sobre la sostenibilidad de las tecnologías de generación más representativas desde un punto de vista sostenible. El objetivo de este proyecto es valorar cuantitativamente la sostenibilidad utilizando para ello los tres pilares de la sostenibilidad, para ello nos hemos apoyado en estudios sobre impactos medioambientales, seguridad en el suministro y costes de generación. Todo esto nos ha llevado a la conclusión de que aunque no existe una tecnología que satisfaga todas las necesidades, las nuevas tecnologías de generación, como las renovables, ganan en competitividad si añadimos un punto de vista sostenible. ABSTRACT In this paper, we have done an analysis about the sustainability of the power generation technologies most representative form a sustainable point of view. The objective of this paper is to evaluate quantitatively the sustainability using for this the three pillars of sustainability, for this we have relied on studies about environmental impacts, security supply and generation costs. All this led us to the conclusion that although there is no technology that satisfies all the necessities, the new generation technologies, such as the renewable, gains in competitiveness if we add a sustainable point of view.
Resumo:
La reutilización de efluentes depurados siempre ha sido una opción en lugares con déficit coyuntural o estructural de recursos hídricos, se haya o no procedido a la regulación y planificación de esta práctica. La necesidad se crea a partir de las demandas de una zona, normalmente riego agrícola, que ven un mejor desarrollo de su actividad por contar con este recurso. España es el país de la UE que más caudal reutiliza, y está dentro de los diez primeros a nivel mundial. La regulación de esta práctica por el RD 1620/2007, ayudó a incorporar la reutilización de efluentes depurados a la planificación hidrológica como parte de los programas de medidas, con objeto de mitigar presiones, como son las extracciones de agua superficial y subterránea, o mejoras medioambientales evitando un vertido. El objeto de este trabajo es conocer la situación de la reutilización de efluentes depurados en España, los diferentes escenarios y planteamientos de esta actividad, el desarrollo del marco normativo y su aplicabilidad, junto a los tratamientos que permiten alcanzar los límites de calidad establecidos en la normativa vigente, en función de los distintos usos. Además, se aporta un análisis de costes de las distintas unidades de tratamiento y tipologías de líneas de regeneración, tanto de las utilizadas después de un tratamiento secundario como de otras opciones de depuración, como son los biorreactores de membrana (MBRs). Para el desarrollo de estos objetivos, en primer lugar, se aborda el conocimiento de la situación de la reutilización en España a través de una base de datos diseñada para cubrir todos los aspectos de esta actividad: datos de la estación depuradora de aguas residuales (EDAR), de la estación regeneradora (ERA), caudales depurados, reutilizados, volúmenes utilizados y ubicación de los distintos usos, tipos de líneas de tratamiento, calidades del agua reutilizada, etc. Las principales fuentes de información son las Confederaciones Hidrográficas (CCHH) a través de las concesiones de uso del agua depurada, las entidades de saneamiento y depuración de las distintas comunidades autónomas (CCAA), ayuntamientos, Planes Hidrológicos de Cuenca (PHC) y visitas a las zonas más emblemáticas. Además, se revisan planes y programas con el fin de realizar una retrospectiva de cómo se ha ido consolidando y desarrollando esta práctica en las distintas zonas de la geografía española. Se han inventariado 322 sistemas de reutilización y 216 tratamientos de regeneración siendo el más extendido la filtración mediante filtro arena seguido de una desinfección mediante hipoclorito, aunque este tratamiento se ha ido sustituyendo por un físico-químico con decantación lamelar, filtro de arena y radiación ultravioleta, tratamiento de regeneración convencional (TRC), y otros tratamientos que pueden incluir membranas, tratamientos de regeneración avanzados (TRA), con dosificación de hipoclorito como desinfección residual, para adaptarse al actual marco normativo. El uso más extendido es el agrícola con el 70% del caudal total reutilizado, estimado en 408 hm3, aunque la capacidad de los tratamientos de regeneración esperada para 2015, tras el Plan Nacional de Reutilización de Aguas (PNRA), es tres veces superior. Respecto al desarrollo normativo, en las zonas donde la reutilización ha sido pionera, las administraciones competentes han ido desarrollando diferentes recomendaciones de calidad y manejo de este tipo de agua. El uso agrícola, y en zonas turísticas, el riego de campos de golf, fueron los dos primeros usos que tuvieron algún tipo de recomendación incluso reglamentación. Esta situación inicial, sin una normativa a nivel estatal ni recomendaciones europeas, creó cierta incertidumbre en el avance de la reutilización tanto a nivel de concesiones como de planificación. En la actualidad sigue sin existir una normativa internacional para la reutilización y regeneración de efluentes depurados. Las recomendaciones de referencia a nivel mundial, y en concreto para el uso agrícola, son las de la OMS (Organización Mundial de la Salud) publicadas 1989, con sus posteriores revisiones y ampliaciones (OMS, 2006). Esta norma combina tratamientos básicos de depuración y unas buenas prácticas basadas en diferentes niveles de protección para evitar problemas sanitarios. Otra normativa que ha sido referencia en el desarrollo del marco normativo en países donde se realiza esta práctica, son las recomendaciones dadas por la Agencia Medioambiente Estadunidense (USEPA, 2012) o las publicadas por el Estado de California (Título 22, 2001). Estas normas establecen unos indicadores y valores máximos dónde el tratamiento de regeneración es el responsable de la calidad final en función del uso. Durante 2015, la ISO trabajaba en un documento para el uso urbano donde se muestra tanto los posibles parámetros que habría que controlar como la manera de actuar para evitar posibles riesgos. Por otro lado, la Comisión Europea (CE) viene impulsando desde el 2014 la reutilización de aguas depuradas dentro del marco de la Estrategia Común de Implantación de la Directiva Marco del Agua, y fundamentalmente a través del grupo de trabajo de “Programas de medidas”. Para el desarrollo de esta iniciativa se está planteando sacar para 2016 una guía de recomendaciones que podría venir a completar el marco normativo de los distintos Estados Miembros (EM). El Real Decreto 1620/2007, donde se establece el marco jurídico de la reutilización de efluentes depurados, tiende más a la filosofía implantada por la USEPA, aunque la UE parece más partidaria de una gestión del riesgo, donde se establecen unos niveles de tolerancia y unos puntos de control en función de las condiciones socioeconómicas de los distintos Estados, sin entrar a concretar indicadores, valores máximos o tratamientos. Sin embargo, en la normativa estadounidense se indican una serie de tratamientos de regeneración, mientras que, en la española, se hacen recomendaciones a este respecto en una Guía sin validez legal. Por tanto, queda sin regular los procesos para alcanzar estos estándares de calidad, pudiendo ser éstos no apropiados para esta práctica. Es el caso de la desinfección donde el uso de hipoclorito puede generar subproductos indeseables. En la Guía de recomendaciones para la aplicación del RD, publicada por el Ministerio de Agricultura y Medioambiente (MAGRAMA) en 2010, se aclaran cuestiones frecuentes sobre la aplicación del RD, prescripciones técnicas básicas para los sistemas de reutilización, y buenas prácticas en función del uso. Aun así, el RD sigue teniendo deficiencias en su aplicación siendo necesaria una revisión de la misma, como en las frecuencias de muestreo incluso la omisión de algunos parámetros como huevos de nematodos que se ha demostrado ser inexistentes tras un tratamiento de regeneración convencional. En este sentido, existe una tendencia a nivel mundial a reutilizar las aguas con fines de abastecimiento, incluir indicadores de presencia de virus o protozoos, o incluir ciertas tecnologías como las membranas u oxidaciones avanzadas para afrontar temas como los contaminantes emergentes. Otro de los objetivos de este trabajo es el estudio de tipologías de tratamiento en función de los usos establecidos en el RD 1620/2007 y sus costes asociados, siendo base de lo establecido a este respecto en la Guía y PNRA anteriormente indicados. Las tipologías de tratamiento propuestas se dividen en líneas con capacidad de desalar y las que no cuentan con una unidad de desalación de aguas salobres de ósmosis inversa o electrodiálisis reversible. Se realiza esta división al tener actuaciones en zonas costeras donde el agua de mar entra en los colectores, adquiriendo el agua residual un contenido en sales que es limitante en algunos usos. Para desarrollar este objetivo se han estudiado las unidades de tratamiento más implantadas en ERAs españolas en cuanto a fiabilidad para conseguir determinada calidad y coste, tanto de implantación como de explotación. El TRC, tiene un coste de implantación de 28 a 48 €.m-3.d y de explotación de 0,06 a 0,09 €. m-3, mientras que, si se precisara desalar, este coste se multiplica por diez en la implantación y por cinco en la explotación. En caso de los usos que requieren de TRA, como los domiciliarios o algunos industriales, los costes serían de 185 a 398 €.m-3.d en implantación y de 0,14 a 0,20 €.m-3 en explotación. En la selección de tecnologías de regeneración, la capacidad del tratamiento en relación al coste es un indicador fundamental. Este trabajo aporta curvas de tendencia coste-capacidad que sirven de herramienta de selección frente a otros tratamientos de regeneración de reciente implantación como son los MBR, u otros como la desalación de agua de mar o los trasvases entre cuencas dentro de la planificación hidrológica. En España, el aumento de las necesidades de agua de alta calidad en zonas con recursos escasos, aumento de zonas sensibles como puntos de captación para potables, zonas de baño o zonas de producción piscícola, y en ocasiones, el escaso terreno disponible para la implantación de nuevas plantas depuradoras (EDARs), han convertido a los MBRs, en una opción dentro del marco de la reutilización de aguas depuradas. En este trabajo, se estudia esta tecnología frente a los TRC y TRA, aportando igualmente curvas de tendencia coste-capacidad, e identificando cuando esta opción tecnológica puede ser más competitiva frente a los otros tratamientos de regeneración. Un MBR es un tratamiento de depuración de fangos activos donde el decantador secundario es sustituido por un sistema de membranas de UF o MF. La calidad del efluente, por tanto, es la misma que el de una EDAR seguida de un TRA. Los MBRs aseguran una calidad del efluente para todos los usos establecidos en el RD, incluso dan un efluente que permite ser directamente tratado por las unidades de desalación de OI o EDR. La implantación de esta tecnología en España ha tenido un crecimiento exponencial, pasando de 13 instalaciones de menos de 5.000 m3. d-1 en el 2006, a más de 55 instalaciones en operación o construcción a finales del 2014, seis de ellas con capacidades por encima de los 15.000 m3. d-1. Los sistemas de filtración en los MBR son los que marcan la operación y diseño de este tipo de instalaciones. El sistema más implantado en España es de membrana de fibra hueca (MFH), sobre todo para instalaciones de gran capacidad, destacando Zenon que cuenta con el 57% de la capacidad total instalada. La segunda casa comercial con mayor número de plantas es Kubota, con membranas de configuración placa plana (MPP), que cuenta con el 30 % de la capacidad total instalada. Existen otras casas comerciales implantadas en MBR españoles como son Toray, Huber, Koch o Microdym. En este documento se realiza la descripción de los sistemas de filtración de todas estas casas comerciales, aportando información de sus características, parámetros de diseño y operación más relevantes. El estudio de 14 MBRs ha posibilitado realizar otro de los objetivos de este trabajo, la estimación de los costes de explotación e implantación de este tipo de sistemas frente a otras alternativas de tratamiento de regeneración. En este estudio han participado activamente ACA y ESAMUR, entidades públicas de saneamiento y depuración de Cataluña y Murcia respectivamente, que cuentan con una amplia experiencia en la explotación de este tipo de sistemas. Este documento expone los problemas de operación encontrados y sus posibles soluciones, tanto en la explotación como en los futuros diseños de este tipo de plantas. El trabajo concluye que los MBRs son una opción más para la reutilización de efluentes depurados, siendo ventajosos en costes, tanto de implantación como de explotación, respecto a EDARs seguidas de TRA en capacidades por encima de los 10.000 m3.d-1. ABSTRACT The reuse of treated effluent has always been an option in places where a situational or structural water deficit exists, whether regulatory and/or planning efforts are completed or not. The need arises from the demand of a sector, commonly agricultural irrigation, which benefits of this new resource. Within the EU, Spain is ahead in the annual volume of reclaimed water, and is among the top ten countries at a global scale. The regulation of this practice through the Royal Decree 1620/2007 has helped to incorporate the water reuse to the hydrological plans as a part of the programme of measures to mitigate pressures such as surface or ground water extraction, or environmental improvements preventing discharges. The object of this study is to gain an overview of the state of the water reuse in Spain, the different scenarios and approaches to this activity, the development of the legal framework and its enforceability, together with the treatments that achieve the quality levels according to the current law, broken down by applications. Additionally, a cost analysis of technologies and regeneration treatment lines for water reclamation is performed, whereas the regeneration treatment is located after a wastewater treatment or other options such as membrane bioreactors (MBR). To develop the abovementioned objectives, the state of water reuse in Spain is studied by means of a database designed to encompass all aspects of the activity: data from the wastewater treatment plants (WWTP), from the water reclamation plants (WRP), the use of reclaimed water, treated water and reclaimed water annual volumes and qualities, facilities and applications, geographic references, technologies, regeneration treatment lines, etc. The main data providers are the River Basin authorities, through the concession or authorization for water reuse, (sanitary and wastewater treatment managers from the territorial governments, local governments, Hydrological Plans of the River Basins and field visits to the main water reuse systems. Additionally, a review of different plans and programmes on wastewater treatment or water reuse is done, aiming to put the development and consolidation process of this activity in the different regions of Spain in perspective. An inventory of 322 reuse systems and 216 regeneration treatments has been gathered on the database, where the most extended regeneration treatment line was sand filtration followed by hypochlorite disinfection, even though recently it is being replaced by physical–chemical treatment with a lamella settling system, depth sand filtration, and a disinfection with ultraviolet radiation and hypochlorite as residual disinfectant, named conventional regeneration treatment (CRT), and another treatment that may include a membrane process, named advanced regeneration treatment (ART), to adapt to legal requirements. Agricultural use is the most extended, accumulating 70% of the reclaimed demand, estimated at 408 hm3, even though the expected total capacity of WRPs for 2015, after the implementation of the National Water Reuse Plan (NWRP) is three times higher. According to the development of the water reuse legal framework, there were pioneer areas where competent authorities developed different quality and use recommendations for this new resource. Agricultural use and golf course irrigation in touristic areas were the first two uses with recommendations and even legislation. The initial lack of common legislation for water reuse at a national or European level created some doubts which affected the implementation of water reuse, both from a planning and a licensing point of view. Currently there is still a lack of common international legislation regarding water reuse, technologies and applications. Regarding agricultural use, the model recommendations at a global scale are those set by the World Health Organization published in 1989, and subsequent reviews and extensions about risk prevention (WHO, 2006). These documents combine wastewater treatments with basic regeneration treatments reinforced by good practices based on different levels of protection to avoid deleterious health effects. Another relevant legal reference for this practices has been the Environmental Protection Agency of the US (USEPA, 2012), or those published by the State of California (Title 22, 2001). These establish indicator targets and maximum thresholds where regeneration treatment lines are responsible for the final quality according to the different uses. During 2015, the ISO has worked on a document aimed at urban use, where the possible parameters to be monitored together with risk prevention have been studied. On the other hand, the European Commission has been promoting the reuse of treated effluents within the Common Implementation Strategy of the Water Framework Directive, mainly through the work of the Programme of Measures Working Group. Within this context, the publication of a recommendation guide during 2016 is intended, as a useful tool to fill in the legal gaps of different Member States on the matter. The Royal Decree 1620/2007, where the water reuse regulation is set, resembles the principles of the USEPA more closely, even though the EU shows a tendency to prioritize risk assessment by establishing tolerance levels and thresholds according to socioeconomic conditions of the different countries, without going into details of indicators, maximum thresholds or treatments. In contrast, in the US law, regeneration treatments are indicated, while in the Spanish legislation, the only recommendations to this respect are compiled in a non-compulsory guide. Therefore, there is no regulation on the different treatment lines used to achieve the required quality standards, giving room for inappropriate practices in this respect. This is the case of disinfection, where the use of hypochlorite may produce harmful byproducts. In the recommendation Guide for the application of the Royal Decree (RD), published by the Ministry of Agriculture and Environment (MAGRAMA) in 2010, clarifications of typical issues that may arise from the application of the RD are given, as well as basic technical parameters to consider in reuse setups, or good practices according to final use. Even so, the RD still presents difficulties in its application and requires a review on issues such as the sampling frequency of current quality parameters or even the omission of nematode eggs indicator, which have been shown to be absent after CRT. In this regard, there is a global tendency to employ water reuse for drinking water, including indicators for the presence of viruses and protozoans, or to include certain technologies such as membranes or advanced oxidation processes to tackle problems like emerging pollutants. Another of the objectives of this study is to provide different regeneration treatment lines to meet the quality requirements established in the RD 1620/2007 broken down by applications, and to estimate establishment and operational costs. This proposal has been based on what is established in the above mentioned Guide and NWRP. The proposed treatment typologies are divided in treatment trains with desalination, like reverse osmosis or reversible electrodialisis, and those that lack this treatment for brackish water. This separation is done due to coastal facilities, where sea water may permeate the collecting pipes, rising salt contents in the wastewater, hence limiting certain uses. To develop this objective a study of the most common treatment units set up in Spanish WRPs is conducted in terms of treatment train reliability to obtain an acceptable relationship between the required quality and the capital and operational costs. The CRT has an establishment cost of 28 to 48 €.m-3.d and an operation cost of 0.06 to 0.09 €.m-3, while, if desalination was required, these costs would increase tenfold for implementation and fivefold for operation. In the cases of uses that require ART, such as residential or certain industrial uses, the costs would be of 185 to 398 €.m-3.d for implementation and of 0.14 to 0.20 €.m-3 for operation. When selecting regeneration treatment lines, the relation between treatment capacity and cost is a paramount indicator. This project provides cost-capacity models for regeneration treatment trains. These may serve as a tool when selecting between different options to fulfill water demands with MBR facilities, or others such as sea water desalination plants or inter-basin water transfer into a water planning framework. In Spain, the requirement for high quality water in areas with low resource availability, the increasing number of sensitive zones, such as drinking water extraction, recreational bathing areas, fish protected areas and the lack of available land to set up new WWTPs, have turned MBRs into a suitable option for water reuse. In this work this technology is analyzed in contrast to CRT and ART, providing cost-capacity models, and identifying when and where this treatment option may outcompete other regeneration treatments. An MBR is an activated sludge treatment where the secondary settling is substituted by a membrane system of UF or MF. The quality of the effluent is, therefore, comparable to that of a WWTP followed by an ART. MBRs ensure a sufficient quality level for the requirements of the different uses established in the RD, even producing an effluent that can be directly treated in OI or EDR processes. The implementation of this technology in Spain has grown exponentially, growing from 13 facilities with less than 5000 m3.d-1 in 2006 to above 55 facilities operating by the end of 2014, 6 of them with capacities over 15000 m3.d-1. The membrane filtration systems for MBR are the ones that set the pace of operation and design of this type of facilities. The most widespread system in Spain is the hollow fiber membrane configuration, especially on high flow capacities, being Zenon commercial technology, which mounts up to 57% of the total installed capacity, the main contributor. The next commercial technology according to plant number is Kubota, which uses flat sheet membrane configuration, which mounts up to 30% of the total installed capacity. Other commercial technologies exist within the Spanish MBR context, such as Toray, Huber, Koch or Microdym. In this document an analysis of all of these membrane filtration systems is done, providing information about their characteristics and relevant design and operation parameters. The study of 14 full scale running MBRs has enabled to pursue another of the objectives of this work: the estimation of the implementation and operation costs of this type of systems in contrast to other regeneration alternatives. Active participation of ACA and ESAMUR, public wastewater treatment and reuse entities of Cataluña and Murcia respectively, has helped attaining this objective. A number of typical operative problems and their possible solutions are discussed, both for operation and plant design purposes. The conclusion of this study is that MBRs are another option to consider for water reuse, being advantageous in terms of both implementation and operational costs, when compared with WWTPs followed by ART, when considering flow capacities above 10000 m3.d-1.
Resumo:
L'arxiu conté catorze presentacions tipo Power Point, corresponents als temes impartits durant el curs 2010/11 en la assignatura de Geologia Aplicada a l'Enginyeria Civil.
Resumo:
Exàmens resolts de Fonaments Matemàtics de l'Enginyeria II del Grau en Enginyeria Civil de la Universitat d'Alacant dels cursos 2010-2011, 2011-2012 i 2012-2013
Resumo:
Materials docents de Fonaments d'Informàtica en Enginyeria de l'Edificació
Resumo:
El análisis de coste de producción de una empresa es fundamental para conseguir una posición competitiva. Se realiza un desglose de todos los costes en la producción para saber cuáles de ellos tienen mayor peso y poder obtener más eficiencia económica. Una vez obtenidos los costes, se decide a qué precio debe estar el producto en el mercado y así podremos calcular el margen de beneficios que obtenemos.
Resumo:
Este ensayo discute la convención a partir de la dinámica de réplica. La coordinación surge a través del concepto de eficiencia explicando por qué los costes de transacción son fundamentalesen las decisiones de los agentes. Cuando los agentes siguendinámicas de réplica existe una serie de reglas «heredadas» que proveen la experiencia que los jugadores necesitan para alcanzar la coordinación. De esta forma la convención será una estrategia evolutivamente estable.
Resumo:
Increased tourist activity in coastal regions demands management strategies to reduce impacts on rocky shores. The highly populated coastal areas in southeastern Brazil are an example of degradation caused by development of industry and tourism. Among different shore impacts, trampling has been intensively studied, and may represent a significant source of stress for intertidal fauna. A randomised blocks design was applied to experimentally study the effects of two different trampling intensities on richness, diversity, density and biomass of the rocky shore fauna of Obuseiro beach, Guarujá, southeastern Brazil. Blocks were distributed in two portions of the intertidal zone, dominated respectively by Chthamalus bisinuatus (Cirripedia) and Isognomon bicolor (Bivalvia). Blocks were trampled over three months, simulating the vacation period in Brazil and were monitored for the following nine months. Results indicate that Chthamalus bisinuatus is vulnerable to trampling impacts. Richness, diversity and turn-over index tended to be higher in trampled plots four months after trampling ceased. In general, results agree with previous trampling studies, suggesting that even low intensities of trampling may cause some impact on intertidal communities. Management strategies should include isolation of sensitive areas, construction of boardwalks, visitor education and monitoring programmes. In Brazil, additional data obtained from experimental studies are necessary in order to achieve a better understanding of trampling impacts on rocky shore communities.
Resumo:
Aims. We report the discovery of very shallow (Delta F/F approximate to 3.4 x 10(-4)), periodic dips in the light curve of an active V = 11.7 G9V star observed by the CoRoT satellite, which we interpret as caused by a transiting companion. We describe the 3-colour CoRoT data and complementary ground-based observations that support the planetary nature of the companion. Methods. We used CoRoT colours information, good angular resolution ground-based photometric observations in- and out- of transit, adaptive optics imaging, near-infrared spectroscopy, and preliminary results from radial velocity measurements, to test the diluted eclipsing binary scenarios. The parameters of the host star were derived from optical spectra, which were then combined with the CoRoT light curve to derive parameters of the companion. Results. We examined all conceivable cases of false positives carefully, and all the tests support the planetary hypothesis. Blends with separation >0.40 '' or triple systems are almost excluded with a 8 x 10(-4) risk left. We conclude that, inasmuch we have been exhaustive, we have discovered a planetary companion, named CoRoT-7b, for which we derive a period of 0.853 59 +/- 3 x 10(-5) day and a radius of R(p) = 1.68 +/- 0.09 R(Earth). Analysis of preliminary radial velocity data yields an upper limit of 21 M(Earth) for the companion mass, supporting the finding. Conclusions. CoRoT-7b is very likely the first Super-Earth with a measured radius. This object illustrates what will probably become a common situation with missions such as Kepler, namely the need to establish the planetary origin of transits in the absence of a firm radial velocity detection and mass measurement. The composition of CoRoT-7b remains loosely constrained without a precise mass. A very high surface temperature on its irradiated face, approximate to 1800-2600 K at the substellar point, and a very low one, approximate to 50 K, on its dark face assuming no atmosphere, have been derived.
Resumo:
Almeida E. S. de, Haddad E. A. and Hewings G. J. D. Transport-regional equity issue revisited, Regional Studies. The objective of this paper is to analyse the relationship between transport and regional equity in Minas Gerais, Brazil. Furthermore, the existence of a trade-off between economic performance and regional equity is investigated as well. To do so, the paper develops a spatial computable general equilibrium model based on Brocker and Schneider`s approach of 2002 to implement comparative static analysis, explicitly incorporating iceberg transportation costs. Four activities are modelled, namely production, final demand, transportation and exports. Two production factors are assumed: labour and other factors. The model has 12 domestic regions and three external regions. Four counterfactual experiments are developed based on decreases in transportation costs due to a `distance shortening`. The main findings indicate that if the transport infrastructure improvement is focused only among poor regions, the promotion of regional equity is insignificant. If the transport infrastructure improvement links are concentrated among rich regions, there is an increase in regional income inequalities. However, if the improvements are targeted to the roads linking poor regions and rich ones, there is greater promotion of regional equity. The same result will occur when improvements are made to all road links of the state. [image omitted] Almeida E. S. de, Haddad E. A. et Hewings G. J. D. La question du rapport entre le transport et l`equilibre regional vue sous un jour nouveau, Regional Studies. Cet article cherche a analyser le rapport entre le transport et l`equilibre regional en Minas Gerais au Bresil. En outre, on examine la presence d`un echange entre la performance economoique et l`equilibre regional. Pour le faire, on construit un modele geographique de l`equilibre general a utiliser sur ordinateur fonde sur l`approche de Brockner et Schneider en 2002 afin de mettre en oeuvre une analyse statique comparative qui comprend explicitement les frais de transport iceberg. On modelise quatre activites, a savoir, la production, la demande finale, le transport et l`exportation. On fait deux suppositions quant aux facteurs de production: la main-d`oevre et d`autres facteurs. Le modele embrasse douze regions internes et trois regions externes. On fait quatre experiences paradoxales fondees sur la baisse des frais de transport due a une `reduction des distances`. Les principaux resultats indiquent que si l`amelioration de l`equipement de transport ne porte que sur les regions defavorisees, la promotion de l`equilibre regional s`avere negligeable. Si l`amelioration de l`equipement de transport focalise les regions riches, il s`avere un creusement des ecarts des revenus regionaux. Cependant, si les ameliorations ciblent les routes qui relient les regions defavorisees aux regions riches, il s`avere une plus grande promotion de l`equilibre regional. Il en va de meme pour la situation ou on a apporte des amenagements a toutes les liaisons routieres de l`etat. Modele geographique de l`equilibre general a utiliser sur ordinateur Equilibre regional Peformance economique Frais de transport Almeida E. S. de, Haddad E. A. und Hewings G. J. D. Die Wiederaufnahme der Frage von Verkehrswesen im Verhaltnis zu regionaler Fairness, Regional Studies. Dieser Aufsatz beabsichtigt, die Beziehung zwischen Verkehrswesen und regionaler Fairness in Minas Gerais (Brasilien) zu analysieren und zugleich auch das Vorkommen von Einbussen entweder bei wirtschaftlicher Leistung der regionaler Fairness zu untersuchen. Zu diesem Zwecke wird ein auf dem Ansatz von Brocker und Schneider (2002) aufbauendes raumliches komputables allgemeines Gleichgewichtsmodell entwickelt, um vergleichende statistische Analysen durchzufuhren, wobei verborgene `Eisberg`-Transportkosten ausdrucklich berucksichtigt werden. Es werden vier Unternehmenstatigk eiten aufgefuhrt: Herstellung, Nachfrage, Transportwesen und Exporte, und zwei Produktionsfaktoren vorausgesetzt: Arbeitskrafte und andere Faktoren. Das Modell umfasst zwolf Inlandsregionen und drei externe Regionen. Es werden vier gegensatzliche Experimente entwickelt, die auf einer Abnahme der Transportkosten infolge einer `Verkurzung der Entfernungen` beruhen. Die Hauptbefunde weisen darauf hin, dass die Forderung regionaler Fairness unbedeutend bleibt, wenn die Verbesserungen der Transportinfrastruktur sich nur auf minderbemittelte Regionen konzentrieren; werden die Verbesserungen der Verbindungen der Transportinfrastruktur in wohlhabenden Regionen durchgefuhrt, so nehmen regionale Einkommensunterschiede zu. Wenn die Verbesserungen jedoch auf Strassen abzielen, die wohlhabende Regionen mit weniger bemittelten verbinden, wird regionale Fairness starker gefordert. Das gleiche Ergebnis wird sich einstellen, wenn Verbesserungen an allen Strassenverbindungen des Staates vorgenommen werden. Raumliches, komputables, allgemeines Gleichgewichtsmodell Regionale Fairness Wirtschaftsleistung Transportkosten Almeida E. S. de, Haddad E. A. y Hewings G. J. D. Revisando el tema de la igualdad del transporte en las regiones, Regional Studies. El objetivo de este documento es analizar la relacion entre el transporte y la igualdad regional en Minas Gerais, Brasil. Asimismo investigamos la existencia de una compensacion entre el rendimiento economico y la igualdad regional. Para ello desarrollamos un modelo de equilibrio general computable y espacial basado en el enfoque de Brocker y Schneider en 2002 para hacer un analisis estatico y comparativo, explicitamente incorporando los costes ocultos de transporte. Se modelan cuatro actividades: la produccion, la demanda final, el transporte y las exportaciones. Suponemos que existen dos factores de produccion: mano de obra y otros factores. En este modelo, existen doce regiones internas y tres regiones externas. Desarrollamos cuatro experimentos contrafactuales basados en la disminucion de los costes de transporte debido a una `acortamiento de las distancias`. Los principales resultados indican que si la mejora de la infraestructura del transporte se centra solo entre las regiones mas pobres, el fomento de la igualdad regional es insignificante. Si los enlaces de la mejora de la infraestructura del transporte se concentran en las regiones ricas, aumentan las desigualdades de ingresos regionales. Sin embargo, si se mejoran los enlaces de carreteras entre las regiones pobres y ricas, se fomenta mejor la igualdad regional. El mismo resultado ocurre cuando se mejoran los enlaces de todas las carreteras del estado. Modelo de equilibrio general computable y espacial Igualdad regional Rendimiento economico Costes de transporte.
Resumo:
O presente artigo aborda a quest??o da apura????o de custos de servi??os p??blicos a partir da perspectiva do processo or??ament??rio no setor p??blico. Nesse sentido, o objetivo principal do trabalho consiste em explicitar uma sistem??tica de an??lise e apura????o de custos de servi??os p??blicos que seja adaptada ao processo or??ament??rio do setor p??blico brasileiro e, assim, contribuir para a obten????o da efici??ncia alocativa e efici??ncia operacional. A sistem??tica de apura????o de custos aqui proposta ?? totalmente compat??vel com os sistemas gerenciais de informa????o utilizados pelo Governo e tem baixo custo de operacionaliza????o porque n??o implica mudan??as apreci??veis nos sistemas de informa????o em uso e na forma de registro das informa????es na contabilidade p??blica. Por fim, a sistem??tica de apura????o de custos de servi??os p??blicos proposta atende ?? Lei de Responsabilidade Fiscal e a complementa quanto ?? apura????o de custos de servi??os e produtos do setor p??blico.