Electronic toll collection systems.

Texas Department of Transportation, Austin

A third survey of domestic electronic digital computing systems /

"This report supersedes BRL report no. 1010 ..."

Refrigeration for cryogenic sensors and electronic systems : proceedings of a conference held at the National Bureau of Standards, Boulder, CO, October 6-7, 1980 /

Item 247.

Food stamp program : implementation of electronic benefit transfer systems : report to the ranking minority member, Committee on Agriculture, Nutrition, and Forestry, U.S. Senate /

"GAO-02-332."

Facilitating Realistic and Efficient Applications of Ab Initio Electronic Dynamics for Polyatomic Systems

Thesis (Ph.D.)--University of Washington, 2016-06

Theory of strongly correlated electron systems. II. Including correlation effects into electronic structure calculations

We have previously shown that a division of the f-shell into two subsystems gives a better understanding of the cohesive properties as well the general behavior of lanthanide systems. In this article, we present numerical computations, using the suggested method. We show that the picture is consistent with most experimental data, e.g., the equilibrium volume and electronic structure in general. Compared with standard energy band calculations and calculations based on the self-interaction correction and LIDA + U, the f-(non-f)-mixing interaction is decreased by spectral weights of the many-body states of the f-ion. (c) 2005 Wiley Periodicals, Inc.

Electronic dispersion compensation using full optical-field reconstruction in 10Gbit/s OOK based systems

We investigate the design of electronic dispersion compensation (EDC) using full optical-field reconstruction in 10Gbit/s on-off keyed transmission systems limited by optical signal-to-noise ratio (OSNR). By effectively suppressing the impairment due to low- frequency component amplification in phase reconstruction, properly designing the transmission system configuration to combat fiber nonlinearity, and successfully reducing the vulnerability to thermal noise, a 4.8dB OSNR margin can be achieved for 2160km single-mode fiber transmission without any optical dispersion compensation. We also investigate the performance sensitivity of the scheme to various system parameters, and propose a novel method to greatly enhance the tolerance to differential phase misalignment of the asymmetric Mach-Zehnder interferometer. This numerical study provides important design guidelines which will enable full optical-field EDC to become a cost-effective dispersion compensation solution for future transparent optical networks.

A review of current knowledge on Electronic Vision Enhancement Systems for the visually impaired

Magnification can be provided to assist those with visual impairment to make the best use of remaining vision. Electronic transverse magnification of an object was first conceived for use in low vision in the late 1950s, but has developed slowly and is not extensively prescribed because of its relatively high cost and lack of portability. Electronic devices providing transverse magnification have been termed closed-circuit televisions (CCTVs) because of the direct cable link between the camera imaging system and monitor viewing system, but this description generally refers to surveillance devices and does not indicate the provision of features such as magnification and contrast enhancement. Therefore, the term Electronic Vision Enhancement Systems (EVES) is proposed to better distinguish and describe such devices. This paper reviews current knowledge on EVES for the visually impaired in terms of: classification; hardware and software (development of technology, magnification and field-of-view, contrast and image enhancement); user aspects (users and usage, reading speed and duration, and training); and potential future development of EVES. © 2003 The College of Optometrists.

Benefits of electronic vision enhancement systems (EVES) for the visually impaired

PURPOSE: To examine whether objective performance of near tasks is improved with various electronic vision enhancement systems (EVES) compared with the subject's own optical magnifier. DESIGN: Experimental study, randomized, within-patient design. METHODS: This was a prospective study, conducted in a hospital ophthalmology low-vision clinic. The patient population comprised 70 sequential visually impaired subjects. The magnifying devices examined were: patient's optimum optical magnifier; magnification and field-of-view matched mouse EVES with monitor or head-mounted display (HMD) viewing; and stand EVES with monitor viewing. The tasks performed were: reading speed and acuity; time taken to track from one column of print to the next; follow a route map, and locate a specific feature; and identification of specific information from a medicine label. RESULTS: Mouse EVES with HMD viewing caused lower reading speeds than stand EVES with monitor viewing (F = 38.7, P < .001). Reading with the optical magnifier was slower than with the mouse or stand EVES with monitor viewing at smaller print sizes (P < .05). The column location task was faster with the optical magnifier than with any of the EVES (F = 10.3, P < .001). The map tracking and medicine label identification task was slower with the mouse EVES with HMD viewing than with the other magnifiers (P < .01). Previous EVES experience had no effect on task performance (P > .05), but subjects with previous optical magnifier experience were significantly slower at performing the medicine label identification task with all of the EVES (P < .05). CONCLUSIONS: Although EVES provide objective benefits to the visually impaired in reading speed and acuity, together with some specific near tasks, some can be performed just as fast using optical magnification. © 2003 by Elsevier Inc. All rights reserved.

Electronic Database Support Systems for Strategic Planning Activities in the Hospitality Industry

An electronic database support system for strategic planning activities can be built by providing conceptual and system specific information. The design and development of this type of system center around the information needs of strategy planners. Data that supply information on the organization's internal and external environments must be originated, evaluated, collected, organized, managed, and analyzed. Strategy planners may use the resulting information to improve their decision making.

From Cash to Electronic Payments: Microeconomic, Macroeconomic, and Policy Aspects of Retail Payment Systems

This dissertation explores three aspects of the economics and policy issues surrounding retail payments (low-value frequent payments): the microeconomic aspect, by measuring costs associated with retail payment instruments; the macroeconomic aspect, by quantifying the impact of the use of electronic rather than paper-based payment instruments on consumption and GDP; and the policy aspect, by identifying barriers that keep countries stuck with outdated payment systems, and recommending policy interventions to move forward with payments modernization. Payment system modernization has become a prominent part of the financial sector reform agenda in many advanced and developing countries. Greater use of electronic payments rather than cash and other paper-based instruments would have important economic and social benefits, including lower costs and thereby increased economic efficiency and higher incomes, while broadening access to the financial system, notably for people with moderate and low incomes. The dissertation starts with a general introduction on retail payments. Chapter 1 develops a theoretical model for measuring payments costs, and applies the model to Guyana—an emerging market in the midst of the transition from paper to electronic payments. Using primary survey data from Guyanese consumers, the results of the analysis indicate that annual costs related to the use of cash by consumers reach 2.5 percent of the country’s GDP. Switching to electronic payment instruments would provide savings amounting to 1 percent of GDP per year. Chapter 2 broadens the analysis to calculate the macroeconomic impacts of a move to electronic payments. Using a unique panel dataset of 76 countries across the 17-year span from 1998 to 2014 and a pooled OLS country fixed effects model, Chapter 2 finds that on average, use of debit and credit cards contribute USD 16.2 billion to annual global consumption, and USD 160 billion to overall annual global GDP. Chapter 3 provides an in-depth assessment of the Albanian payment cards and remittances market and recommends a set of incentives and regulations (both carrots and sticks) that would allow the country to modernize its payment system. Finally, the conclusion summarizes the lessons of the dissertation’s research and brings forward issues to be explored by future research in the retail payments area.

Simulation tools for the analysis of single electronic systems

Developments in theory and experiment have raised the prospect of an electronic technology based on the discrete nature of electron tunnelling through a potential barrier. This thesis deals with novel design and analysis tools developed to study such systems. Possible devices include those constructed from ultrasmall normal tunnelling junctions. These exhibit charging effects including the Coulomb blockade and correlated electron tunnelling. They allow transistor-like control of the transfer of single carriers, and present the prospect of digital systems operating at the information theoretic limit. As such, they are often referred to as single electronic devices. Single electronic devices exhibit self quantising logic and good structural tolerance. Their speed, immunity to thermal noise, and operating voltage all scale beneficially with junction capacitance. For ultrasmall junctions the possibility of room temperature operation at sub picosecond timescales seems feasible. However, they are sensitive to external charge; whether from trapping-detrapping events, externally gated potentials, or system cross-talk. Quantum effects such as charge macroscopic quantum tunnelling may degrade performance. Finally, any practical system will be complex and spatially extended (amplifying the above problems), and prone to fabrication imperfection. This summarises why new design and analysis tools are required. Simulation tools are developed, concentrating on the basic building blocks of single electronic systems; the tunnelling junction array and gated turnstile device. Three main points are considered: the best method of estimating capacitance values from physical system geometry; the mathematical model which should represent electron tunnelling based on this data; application of this model to the investigation of single electronic systems. (DXN004909)

Investigating the Roles and Requirements, Manifestations and Management of Metadata in the Creation of Reliable and Preservation of Authentic Electronic Entities Created by Dynamic, Interactive and Experiential Systems: Report on the Work and Findings of the Interpares 2 Description Cross Domain Group

Metadata that is associated with either an information system or an information object for purposes of description, administration, legal requirements, technical functionality, use and usage, and preservation, plays a critical role in ensuring the creation, management, preservation and use and re-use of trustworthymaterials, including records. Recordkeeping1 metadata, of which one key type is archival description, plays a particularly important role in documenting the reliability and authenticity of records and recordkeeping systemsas well as the various contexts (legal-administrative, provenancial, procedural, documentary, and technical) within which records are created and kept as they move across space and time. In the digital environment, metadata is also the means by which it is possible to identify how record components – those constituent aspects of a digital record that may be managed, stored and used separately by the creator or the preserver – can be reassembled to generate an authentic copy of a record or reformulated per a user’s request as a customized output package.Issues relating to the creation, capture, management and preservation of adequate metadata are, therefore, integral to any research study addressing the reliability and authenticity of digital entities, regardless of the community, sector or institution within which they are being created. The InterPARES 2 Description Cross-Domain Group (DCD) examined the conceptualization, definitions, roles, and current functionality of metadata and archival description in terms of requirements generated by InterPARES 12. Because of the needs to communicate the work of InterPARES in a meaningful way across not only other disciplines, but also different archival traditions; to interface with, evaluate and inform existing standards, practices and other research projects; and to ensure interoperability across the three focus areas of InterPARES2, the Description Cross-Domain also addressed its research goals with reference to wider thinking about and developments in recordkeeping and metadata. InterPARES2 addressed not only records, however, but a range of digital information objects (referred to as “entities” by InterPARES 2, but not to be confused with the term “entities” as used in metadata and database applications) that are the products and by-products of government, scientific and artistic activities that are carried out using dynamic, interactive or experiential digital systems. The nature of these entities was determined through a diplomatic analysis undertaken as part of extensive case studies of digital systems that were conducted by the InterPARES 2 Focus Groups. This diplomatic analysis established whether the entities identified during the case studies were records, non-records that nevertheless raised important concerns relating to reliability and authenticity, or “potential records.” To be determined to be records, the entities had to meet the criteria outlined by archival theory – they had to have a fixed documentary format and stable content. It was not sufficient that they be considered to be or treated as records by the creator. “Potential records” is a new construct that indicates that a digital system has the potential to create records upon demand, but does not actually fix and set aside records in the normal course of business. The work of the Description Cross-Domain Group, therefore, addresses the metadata needs for all three categories of entities.Finally, since “metadata” as a term is used today so ubiquitously and in so many different ways by different communities, that it is in peril of losing any specificity, part of the work of the DCD sought to name and type categories of metadata. It also addressed incentives for creators to generate appropriate metadata, as well as issues associated with the retention, maintenance and eventual disposition of the metadata that aggregates around digital entities over time.