A comparison of integrated biomass to electricity systems

This thesis presents a comparison of integrated biomass to electricity systems on the basis of their efficiency, capital cost and electricity production cost. Four systems are evaluated: combustion to raise steam for a steam cycle; atmospheric gasification to produce fuel gas for a dual fuel diesel engine; pressurised gasification to produce fuel gas for a gas turbine combined cycle; and fast pyrolysis to produce pyrolysis liquid for a dual fuel diesel engine. The feedstock in all cases is wood in chipped form. This is the first time that all three thermochemical conversion technologies have been compared in a single, consistent evaluation.The systems have been modelled from the transportation of the wood chips through pretreatment, thermochemical conversion and electricity generation. Equipment requirements during pretreatment are comprehensively modelled and include reception, storage, drying and communication. The de-coupling of the fast pyrolysis system is examined, where the fast pyrolysis and engine stages are carried out at separate locations. Relationships are also included to allow learning effects to be studied. The modelling is achieved through the use of multiple spreadsheets where each spreadsheet models part of the system in isolation and the spreadsheets are combined to give the cost and performance of a whole system.The use of the models has shown that on current costs the combustion system remains the most cost-effective generating route, despite its low efficiency. The novel systems only produce lower cost electricity if learning effects are included, implying that some sort of subsidy will be required during the early development of the gasification and fast pyrolysis systems to make them competitive with the established combustion approach. The use of decoupling in fast pyrolysis systems is a useful way of reducing system costs if electricity is required at several sites because• a single pyrolysis site can be used to supply all the generators, offering economies of scale at the conversion step. Overall, costs are much higher than conventional electricity generating costs for fossil fuels, due mainly to the small scales used. Biomass to electricity opportunities remain restricted to niche markets where electricity prices are high or feed costs are very low. It is highly recommended that further work examines possibilities for combined beat and power which is suitable for small scale systems and could increase revenues that could reduce electricity prices.

Cost economies, efficiency and productivity growth in the Chinese banking industry:evidence from a quarterly panel dataset

This article examines cost economies, productivity growth and cost efficiency of the Chinese banks using a unique panel dataset that identifies banks' four outputs and four input prices over the period of 1995-2001. By assessing the appropriateness of model specification, and making use of alternative methodologies in evaluating the performance of banks, we find that the joint-stock commercial banks outperform state-owned commercial banks in productivity growth and cost efficiency. Under the variable cost assumption, Chinese banks display economies of scale, with state-owned commercial banks enjoying cost advantages over the joint-stock commercial banks. Consequently, our results highlight the ownership advantage of these two types of banks and generally support the ongoing banking reform and transformation that is currently taking place in China.

Measuring economies of horizontal and vertical integration in the US electric power industry:how costly is unbundling?

This research employs econometric analysis on a cross section of American electricity companies in order to study the cost implications associated with unbundling the operations of integrated companies into vertically and/or horizontally separated companies. Focusing on the representative sample average firm, we find that complete horizontal and vertical disintegration resulting in the creation of separate nuclear, conventional, and hydro electric generation companies as well as a separate firm distributing power to final consumers, results in a statistically significant 13.5 percent increase in costs. Maintaining a horizontally integrated generator producing nuclear, conventional, and hydro electric generation while imposing vertical separation by creating a stand alone distribution company, results in a lower but still substantial and statistically significant cost penalty amounting to an 8.1 % increase in costs relative to a fully integrated structure. As these results imply that a vertically separated but horizontally integrated generation firm would need to reduce the costs of generation by 11% just to recoup the cost increases associated with vertical separation, even the costs associated with just vertical unbundling are quite substantial. Our paper is also the first academic paper we are aware of that systematically considers the impact of generation mix on vertical, horizontal, and overall scope economies. As a result, we are able to demonstrate that the estimated cost of unbundling in the electricity sector is substantially influenced by generation mix. Thus, for example, we find evidence of strong vertical integration economies between nuclear and conventional generation, but little evidence for vertical integration benefits between hydro generation and the distribution of power. In contrast, we find strong evidence suggesting the presence of substantial horizontal integration economies associated with the joint production of hydro generation with nuclear and/or conventional fossil fuel generation. These results are significant because they indicate that the cost of unbundling the electricity sector will differ substantially in different systems, meaning that a blanket regulatory policy with regard to the appropriateness of vertical and horizontal unbundling is likely to be inappropriate.

Innovation, networking and globalisation:the role of regional innovation systems in the global innovation process

In the global economy, innovation is one of the most important competitive assets for companies willing to compete in international markets. As competition moves from standardised products to customised ones, depending on each specific market needs, economies of scale are not anymore the only winning strategy. Innovation requires firms to establish processes to acquire and absorb new knowledge, leading to the recent theory of Open Innovation. Knowledge sharing and acquisition happens when firms are embedded in networks with other firms, university, institutions and many other economic actors. Several typologies of innovation and firm networks have been identified, with various geographical spans. One of the first being modelled was the Industrial Cluster (or in Italian Distretto Industriale) which was for long considered the benchmark for innovation and economic development. Other kind of networks have been modelled since the late 1970s; Regional Innovation Systems represent one of the latest and more diffuse model of innovation networks, specifically introduced to combine local networks and the global economy. This model was qualitatively exploited since its introduction, but, together with National Innovation Systems, is among the most inspiring for policy makers and is often cited by them, not always properly. The aim of this research is to setup an econometric model describing Regional Innovation Systems, becoming one the first attempts to test and enhance this theory with a quantitative approach. A dataset of 104 secondary and primary data from European regions was built in order to run a multiple linear regression, testing if Regional Innovation Systems are really correlated to regional innovation and regional innovation in cooperation with foreign partners. Furthermore, an exploratory multiple linear regression was performed to verify which variables, among those describing a Regional Innovation Systems, are the most significant for innovating, alone or with foreign partners. Furthermore, the effectiveness of present innovation policies has been tested based on the findings of the econometric model. The developed model confirmed the role of Regional Innovation Systems for creating innovation even in cooperation with international partners: this represents one of the firsts quantitative confirmation of a theory previously based on qualitative models only. Furthermore the results of this model confirmed a minor influence of National Innovation Systems: comparing the analysis of existing innovation policies, both at regional and national level, to our findings, emerged the need for potential a pivotal change in the direction currently followed by policy makers. Last, while confirming the role of the presence a learning environment in a region and the catalyst role of regional administration, this research offers a potential new perspective for the whole private sector in creating a Regional Innovation System.

A simulation analysis of spoke-terminals operating in LTL Hub-and-Spoke freight distribution systems

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT The research presented in this thesis is concerned with Discrete-Event Simulation (DES) modelling as a method to facilitate logistical policy development within the UK Less-than-Truckload (LTL) freight distribution sector which has been typified by “Pallet Networks” operating on a hub-and-spoke philosophy. Current literature relating to LTL hub-and-spoke and cross-dock freight distribution systems traditionally examines a variety of network and hub design configurations. Each is consistent with classical notions of creating process efficiency, improving productivity, reducing costs and generally creating economies of scale through notions of bulk optimisation. Whilst there is a growing abundance of papers discussing both the network design and hub operational components mentioned above, there is a shortcoming in the overall analysis when it comes to discussing the “spoke-terminal” of hub-and-spoke freight distribution systems and their capabilities for handling the diverse and discrete customer profiles of freight that multi-user LTL hub-and-spoke networks typically handle over the “last-mile” of the delivery, in particular, a mix of retail and non-retail customers. A simulation study is undertaken to investigate the impact on operational performance when the current combined spoke-terminal delivery tours are separated by ‘profile-type’ (i.e. retail or nonretail). The results indicate that a potential improvement in delivery performance can be made by separating retail and non-retail delivery runs at the spoke-terminal and that dedicated retail and non-retail delivery tours could be adopted in order to improve customer delivery requirements and adapt hub-deployed policies. The study also leverages key operator experiences to highlight the main practical implementation challenges when integrating the observed simulation results into the real-world. The study concludes that DES be harnessed as an enabling device to develop a ‘guide policy’. This policy needs to be flexible and should be applied in stages, taking into account the growing retail-exposure.

Out of Challenge, Opportunity: Central America's Electric Sector & Key Issues and Recommendations for Enhanced Regional Electric Integration

Taken together, the six nations of Central America count a population of roughly 40 million people and an energy market equal in size to that of Colombia, sufficient to benefit from economies of scale. The region has traditionally been a net importer of hydrocarbons, and hydroelectricity has dominated electric generation. But more recently, thermoelectric generation (diesel and fuel oil) has greatly increased as a percentage of the regional generation market. Progress has been made across the region’s electric sector, beginning with reforms in the 1990s and the 1996 signing of a regional treaty aimed at the development of a regional energy integration project – the Central American Electrical Interconnection System, or SIEPAC. A fundamental SIEPAC goal is to set up a regional electric market and a regulatory system. Indeed, after many years of development, SIEPAC is poised to open a new chapter in Central America’s electric infrastructure and market. But this new era must contend with critical issues such as the need to consolidate the regional electric market, political issues surrounding the venture, and security concerns. Moreover, local conflicts, in different degrees, have become priorities for policymakers, and these are possible barriers to completing the project. The goals of the SIEPAC project and of deepening the broader electric integration process are possible if national and regional decision makers understand that cooperative decision making will produce better results than separate national decision making. Enhanced regional understanding and cooperative decision making, combined with an effort to reorient the terminology and dialogue vis-à-vis energy efficiency in Central America, form the core recommendations of this paper.

Origin of scale-free intermittency in structural first-order phase transitions

16 pages, 22 figures

Fast pyrolysis of biomass for energy and fuels

Bioenergy is now accepted as having the potential to provide the major part of the projected renewable energy provisions of the future as biofuels in the form of gas, liquid or solid fuels or electricity and heat. There are three main routes to providing these biofuels — thermal conversion, biological conversion and physical conversion — all of which employ a range of chemical reactor configurations and process designs. This paper focuses on fast pyrolysis from which the liquid, often referred to as bio-oil, can be used on-site or stored or transported to centralised and/or remote user facilities for utilisation for example as a fuel, or further processing to biofuels and/or chemicals. This offers the potential for system optimisation, much greater economies of scale and exploitation of the concepts of biorefineries. The technology of fast pyrolysis is described, particularly the reactors that have been developed to provide the necessary conditions to optimise performance. The primary liquid product is characterised, as well as the secondary products of electricity and/or heat, liquid fuels and a considerable number of chemicals. The main technical and non-technical barriers to the market deployment of the various technologies are identified and briefly discussed.

Biofuels and Sustainable Energy Development in Brazil

Through the assessment of three decades of the Alcohol Program in Brazil, the paper shows that adequate public policies regarding biomass production can deliver direct benefits like energy security improvement, foreign exchange savings, and local employment generation, reduced urban air pollution and avoided CO(2) emissions. Moreover, the paper shows that Brazilian produced ethanol has faced economies of scale, technical progress and productivity gains and is no longer dependent on subsidies to be competitive. The paper also examines the potential in Brazil for fostering other biofuels, namely biodiesel obtained from vegetable oils, as well as their implications on sustainable energy development. (C) 2011 Elsevier Ltd. All rights reserved.

Can globalisation result in less efficient and more vulnerable industries?

Growing economic globalisation (a means of market extension) may increase the economic vulnerability of firms in modern industries, especially those in which firms experience substantial economies of scale. The possibility is explored that globalisation activates competitive pressures that forces firms into a situation where their leverage (fixed costs relative to variable costs, or overhead cost relative to operating costs or capital intensity) rises substantially. Consequently, they become increasingly vulnerable to a sudden adverse change in economic conditions, such as a collapse in the demand for their industry’s product. This is explored for monopolistically competitive markets and also for oligopolistic markets of the type considered and modelled by Sweezy using kinked demand curves. In addition, globalisation is hypothesised to induce firms to become more uniformly efficient. While this has static efficiency advantages, this lack of heterogeneity in productive efficiency of firms can make for economic inefficiency in the adjustment of the industry to altered economic conditions. It is shown that lack of variation in the economic efficiency of firms can impede the speed of market adjustment to new equilibria and may destabilise market equilibria.

Trying To understand all-equity firms

This paper studies all equity firms and shows which are in US firms, the main drivers of zero-debt policy. I analyze 6763 U.S. listed companies in years 1987-2009, a total of 77442 firms year. I find that financial constrained firms show a higher probability to become unlevered. In the opposite side, firms producing high cash flow are also likely to become unlevered, paying their debt. Some firms create economies of scale in the use of funds, increasing the probability of become unlevered. The industry characteristics are also important to explain the zero-debt policy. However is the high perception of risk, the most important factor influencing this extreme behavior, which is consistent with trade-off theory.

Plano de negócios para a construção de uma unidade fabril de misturas complementares

A Cooperativa Agrícola de Vila do Conde desenvolve um negócio de fabrico e comercialização de misturas complementares para alimentação bovina, sobretudo para vacas leiteiras. Há alguns anos a esta parte, esta Cooperativa sabe que terá que deslocalizar a unidade fabril existente devido a imposições da Direção Geral de Alimentação e Veterinária, relacionadas com questões de natureza ambiental. A necessidade de ser realizado um novo investimento, para garantir a sustentabilidade do negócio mais rentável gerido por esta Cooperativa, levou a pensar-se na possibilidade de construção de uma nova unidade fabril, de dimensão superior, capaz de servir outras cooperativas, visando o desejado entendimento das cooperativas em torno de um objetivo comum, logrando a obtenção de economias de escala, de extrema importância para a sobrevivência do setor leiteiro na região do Entre Douro e Minho. Para o efeito será constituída uma nova sociedade por quotas, designada por AGRIVIL XXI, Lda., de capital exclusivamente cooperativo, possibilitando que, em cada momento, se possa aferir a situação económica e financeira do negócio de forma mais rigorosa e autónoma. Esta realidade foi conducente à elaboração do presente Plano de Negócios que se espera profícuo para definição dos objetivos e metas a atingir num futuro próximo pela Cooperativa Agrícola de Vila do Conde. As análises de viabilidade e do risco do projeto demonstraram estarem criadas as condições de aceitação do mesmo, sendo expectável um VAL de 1.371.764 euros, uma TIR de 12,04% e um pay-back period próximo dos 11 anos. No entanto é notório a existência de um risco inerente ao investimento na medida em que o montante dos fluxos gerados tende a aproximar-se dos fluxos investidos, não gerando um excedente de riqueza significativo.

Economias de escala em centros hospitalares

RESUMO - Perante o actual contexto de contenção de gastos no sector da saúde e consequente preocupação com a eficiência do sistema, tem‐se assistido a mudanças várias no modelo de gestão e organizacional do sistema de saúde. Destaca‐se a alteração da estrutura hospitalar, com vista à racionalização dos seus recursos internos, onde as fusões hospitalares têm assumido um papel determinante. Em Portugal, nos últimos 10 anos, assistiu‐se a uma significativa redução do número de hospitais (de sensivelmente 90 para 50 unidades), exclusivamente através das fusões e sem quaisquer alterações no número de estruturas físicas existentes. Não obstante os argumentos justificativos desta reforma, a avaliação dos objectivos implícitos é insuficiente. Neste âmbito, pretendeu‐se com este estudo contribuir para a análise do impacte da criação de centros hospitalares na redução de gastos, isto é, verificar se a consolidação e consequente reengenharia dos processos produtivos teve consequencias ao nível da obtenção de economias de escala. Para esta análise usou‐se uma base de dados em painel, onde se consideraram 75 hospitais durante 7 anos (2003‐2009), número que foi reduzindo ao longo do período em análise devido às inúmeras fusões já referidas. Para avaliar os ganhos relativos às fusões hospitalares, ao nível da eficiência técnica e das economias de escala, recorreu‐se à fronteira estocástica especificada função custo translog. Estimada a fronteira, foi possível analisar três centros hospitalares específicos, onde se comparou o período pré‐fusão (2005‐2006) com o período após a fusão (2008‐2009). Como variáveis explicativas, relativas à produção hospitalar, considerou‐se o número de casos tratados e os dias de internamento (Vita, 1990; Schuffham et al., 1996), o número de consultas e o número de urgências, sendo estas variáveis as mais comuns na literatura (Vita, 1990; Fournier e Mitchell, 1992; Carreira, 1999). Quanto à variável dependente usou‐se o custo variável total, que compreende o total de custos anuais dos hospitais excepto de imobilizado. Como principais conclusões da investigação, em consequência da criação dos centros hospitalares, são de referir os ganhos de escala na fusão de hospitais de reduzida dimensão e com mais serviços complementares. --------ABSTRACT - Driven by the current pressure on resources induced by budgetary cuts, the Portuguese Ministry of Health is imposing changes in the management model and organization of NHS hospitals. The most recent change is based on the creation of Hospital Centres that are a result of administrative mergers of existing hospitals. In less than 10 years the number of hospitals passed from around 90 to around 50, only due to the mergers and without any change in the existing number of physical institutions. According to the political discourse, one of the main goals expected from this measure is the creation of synergies and more efficiency in the use of available resources. However, the merger of the hospitals has been a political decision without support or evaluation of the first experiments. The aim of this study is to measure the results of this policy by looking at economies of scale namely through reductions in the expenditures, as expected and sought by the MoH. Data used covers 7 years (2003‐2009) and 75 hospitals, number that has been reduced my the enoumerous mergers during the last decade. This work uses a stochastic frontier analysis through the translog cost function to examine the gains from mergers, which were decomposed into technical efficiency and economies of scale. It was analised these effects by the creation of three specific hospital centers, using a longitudinal approach to compare the period pre‐merger (2003‐2006) with the post‐merger period (2007‐09). To measure changes in inpatient hospital production volume and length of stay are going to be considered as done by Vita (1990) and Schuffham et al. (1996). For outpatient services the number of consultations and emergencies are going to be considered (Vita, 1990; Fournier e Mitchell, 1992; Carreira, 1999). Total variable cost is considered as the dependent variable explained the aforementioned ones. After a review of the literature results expected point to benefits from the mergers, namely a reduction in total expenditures and in the number of duplicated services. Results extracted from our data point in the same direction, and thus for the existence of some economies of scale only for small hospitals.