Variações horárias na entrada e saída dos golfinhos-rotadores e sua relação com fatores ambientais, na Baía dos Golfinhos em Fernando de Noronha PE

The dolphins are found in all world s marine environments, except for poles. On Brazil, the major concentration of this animals is on Fernando de Noronha Islands, wich have a tropical climate with two well-defined rainfall seasons: dry and rainy season. The Baía dos Golfinhos, wich is the most crowded piece of dolphins on the archipelago. These research looks for to characterize the circadian rhythms of the spinner dolphin behavior, Stenella longirostris, on the Baía dos Golfinhos occupation, at the Fernando de Noronha islands, Brazil s northeast, according to the fluctuations of environment that they all are inserted. The research was realized daily between 1991 January and 2009 December, with observations from a fixed point up to Mirante dos Golfinhos, located on Baía dos Golfinhos. The data was examined with the PASW Statistics 18 program, up to nonparametric tests, being analyzed on the incoming and out coming time of the spinner dolphins and the relationship with moon phases, the wind incidence, and the rainfall season, the dolphins were inserted. The spinner dolphins diurnal rhythms are influenced by moon phases, the spinner dolphins arrival at Baía dos Golfinhos earlier when it s full moon because of the high luminosity at night cause a bigger food efficiency for these animals. The outgoing time of spinner dolphins didn t show statistic difference between moon phases, despite follows the same pattern for the incoming time. When the spinner dolphins are submitted to bigger wind incidence conditions around the archipelago, the dolphins come early to the Baía dos Golfinhos, since that one is protected from wind that reaches Fernando de Noronha, the spinner dolphins tends to arrive later and leave earlier of the bay because the rain may cause adverse conditions for your rest.

Activity and habitat use of two species of stingrays (Myliobatiformes: Potamotrygonidae) in the upper Paraná River basin, Southeastern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adaptation of the reservoir fish assemblage index (RFAI) for assessing the Barra Bonita Reservoir (São Paulo, Brazil)

In order to evaluate the environmental condition of the Barra Bonita Reservoir, we adapted the Index of Biotic Integrity (IBI). We chose 24 sampling sites in which three types of habitats were sampled: the mouths of tributaries, the central reservoir and the lateral reservoir. Fish were caught in two seasons (dry and rainy) using 10 gillnet gangs, with meshes ranging from 3 to 12 cm between opposite knots, and funnel traps. Abiotic and biotic variables were measured. Due to the artificial nature of the reservoir, the term biotic integrity was considered inappropriate and the term RFAI (Reservoir Fish Assemblage Index) was adopted. Twelve metrics from sixteen possibles were selected using the Pearson correlation coefficient. The reference conditions were set up based on the criteria of the best condition observed. For each metric, a score of 1, 3 or 5 was assigned as it strongly departs (1), slightly departs (3) or approaches (5) the reference condition. The index value is the sum of the metrics partial scores and ranges from 12 to 60. To evaluate the importance of the unit of measurement of the metric, the index was calculated in fish number (RFAI(N)) and in weight (RFAI(w)). The correlation between RFAIN and RFAIw was very high (r = 0.90, n = 46) indicating that the unit of measurement does not influence the final result of the index. Most of the sampling sites were classified in the 'reasonable' RFAI category. Only the central sites were classified as 'poor'. To validate the RFAI, another index, the Habitat Quality Index (HQI), was built starting from the physiochemical and habitat variables collected. The correlation of the RFAI with the HQI was highly significant (RFAIN, r = 0.37; RFAI(w), r = 0.47; n = 46), indicating that they respond in the same way to environmental degradation. The HQI metrics which most affect RFAI were depth, surrounding landscape and macrophyte presence/absence. Copyright C) 2007 John Wiley & Sons, Ltd.

Occurrence of Hymenoptera on Sus scrofa carcasses during summer and winter seasons in southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seasonal variation in body size of tropical anuran amphibians.

Most anurans are considered short lived reproducing only once, with adult size being an important factor contributing to mating success. We sampled anurans with 30 pitfall traps in three forest patches of the northwestern São Paulo State, Brazil, throughout one year. Our objective was to analyze the variation in anuran body size between the dry and rainy season. Our hypothesis is that anurans registered during the rainy season will be larger than conspecifics registered during dry season, since there is a selective advantage in having a larger body size during reproduction activity. The most abundant species registered in the patches were Eupemphix nattereri, Physalaemus cuvieri and Leptodactylus podicipinus. Males and females of E. nattereri and P. cuvieri recorded in the rainy season were larger than of those captured in the dry one. In contrast, males of L. podicipinus were larger in the dry season than in the rainy season. Besides, the operational sex ratio (OSR) in the breeding season was biased towards males in these three species with, respectively, 4.66, 3.2 and 1.87 males per female. Our results suggest that probably body size variation between different seasons is a consequence of individuals' turnover between rainy seasons. Lower individuals captured in the dry season, would be reproductively active adults in the next breeding season.

Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions

The objective of this study was to evaluate the durability of bond strength between a resin cement and aluminous ceramic submitted to various surface conditioning methods. Twenty-four blocks (5 X 5 X 4 mm 3) of a glass-in filtrated zirconia-alumina ceramic (inCeram Zirconia Classic) were randomly divided into three surface treatment groups: ST1-Air-abrasion with 110-mu m Al2O3 particles + silanization; ST2-Laboratory tribochemical silica coating method (110-mu m Al2O3, ilO-PM Silica) (Rocatec) + silanization; ST3-Chairside tribochemical silica coating method (30-mu m SiOx) (CoJet) + silanization. Each treated ceramic block was placed in its silicone mold with the treated surface exposed. The resin cement (Panavia F) was prepared and injected into the mold over the treated surface. Specimens were sectioned to achieve nontrimmed bar specimens (14 sp/block) that were randomly divided into two conditions: (a) Dry-microtensile test after sectioning; (b) Thermocycling (TC)-(6,000X, 5-55 degrees C) and water storage (150 days). Thus, six experimental groups were obtained (11 = 50): Gr1-ST1 + dry; Gr2-ST1 + TC. Gr3-ST2 + dry; Gr4-ST2 + TC; Gr5-ST3 + dry; Gr6ST3 + TC. After microtensile testing, the failure types were noted. ST2 (25.1 +/- 11) and ST3 (24.1 +/- 7.4) presented statistically higher bond strength (MPa) than that of STI (17.5 +/- 8) regardless of aging conditions (p < 0.0001). While Gr2 revealed the lowest results (13.3 +/- 6.4), the other groups (21.7 +/- 7.4-25. 9 +/- 9.1) showed statistically no significant differences (two-way ANOVA and Tukey's test, a 0.05). The majority of the failures were mixed (82%) followed by adhesive failures (18%). Gr2 presented significantly higher incidence of ADHESIVE failures (54%) than those of other groups (p = 0.0001). Both laboratory and chairside silica coating plus silanization showed durable bond strength. After aging, airabrasion with 110-mu m Al2O3 + silanization showed the largest decrease indicating that aging is fundamental for bond strength testing for acid-resistant Arconia ceramics in order to estimate their long-term performance in the mouth. (c) 2007 Wiley Periodicals, Inc.

Financial comparisons of the artisanal fisheries in Urubupungá Complex in the middle Paraná River (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rentabilidade da produção orgânica de alface em função do ambiente, preparo do solo e época de plantio

Além da produtividade física e da conservação do solo, o cultivo protegido e o preparo do solo, na olericultura, requerem altos investimentos, muito trabalho e insumos externos. Assim, o objetivo deste trabalho, foi identificar combinações entre ambiente, preparo do solo e época de plantio capazes de melhorar o desempenho econômico e a produtividade da cultura da alface em cultivo orgânico, em Rio Branco, Acre. O cultivo foi realizado em quatro tipos de ambientes: 1 - sombreamento proporcionado em 52% sob latada de maracujá; 2 - 35% de sombreamento sob estufa; 3 - 50% sob tela de sombreamento; e, 4 - cultivo a pleno sol (testemunha), considerando cada ambiente como um experimento, que avaliou-se três preparos de solo (plantio direto, cultivo mínimo e preparo convencional) em duas épocas de plantio (estiagem e chuvosa), sob delineamento de blocos ao acaso, com quatro repetições. Considerou-se como custo de produção a soma de todos os valores (insumos) e operações (serviços) utilizados no processo produtivo, incluindo-se os respectivos custos alternativos ou de oportunidade e a depreciação das instalações. O cultivo em estufa e sob tela de sombreamento aumenta a produtividade em época de estiagem, enquanto em época chuvosa, a produtividade é maior em cultivo sob estufa. O plantio direto e cultivo mínimo a pleno sol ou cultivo mínimo sob tela de sombreamento promovem maior produtividade no preparo convencional do solo. Proporcionam lucro supernormal (RMe > CTMe): o cultivo na época chuvosa (verão); sob sombreamento de latada de maracujá-amarelo; a pleno sol; o preparo convencional do solo sob latada e o plantio direto a pleno sol.

Effects of daily changes in environmental factors on the abundance and richness of Odonata

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Prediction of dry matter intake based on ruminal degradation from milking cows grazing coast-cross grass

Dry matter intake (DMI) of coast-cross grazing by crossbred Holstein-Zebu and Zebu lactating cows was calculated using in vitro dry matter digestibility from extrusa (four esophageal fistulated cows) and fecal output estimate with mordent chromium. Pasture was rotationally grazed with three days grazing period and 27 days testing period, adopting a stocking rate of 1.6 and 3.2 cows/ha, during the dry and rainy season respectively. Voluntary DMI was estimated from degradation characteristics using different equations. Predicted coast-cross DMI varied with models. The prediction of tropical forages dry matter intake from equations based in ruminal degradation parameters needs farther investigation before being employed in practice.

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

Objectives. This study evaluated the durability of bond strength between resin cement and a feldspathic ceramic submitted to different etching regimens with and without silane coupling agent application.Methods. Thirty-two blocks (6.4 mm x 6.4 mm x 4.8 mm) were fabricated using a microparticulate feldspathic ceramic (Vita VM7), ultrasonically cleaned with water for 5 min and randomly divided into four groups, according to the type of etching agent and silanization method: method 1, etching with 10% hydrofluoric (HF) acid gel for I min + silanization; method 2, HF only; method 3, etching with 1.23% acidulated phosphate fluoride (APF) for 5 min + silanization; method 4, APF only. Conditioned blocks were positioned in their individual silicone molds and resin cement (Panavia F) was applied on the treated surfaces. Specimens were stored in distilled water (37 degrees C) for 24 h prior to sectioning. After sectioning the ceramic-cement blocks in x- and Y-axis with a bonded area of approximately 0.6 mm(2), the microsticks of each block were randomly divided into two storage conditions: Dry, immediate testing; TC, thermal cycling (12,000 times) + water storage for 150 d, yielding to eight experimental groups. Microtensile bond strength tests were performed in universal testing machine (cross-head speed: 1 mm/min) and failure types were noted. Data obtained (MPa) were analyzed with three-way ANOVA and Tukey's test (alpha = 0.05).Results. Significant influence of the use of silane (p < 0.0001), storage conditions (p = 0.0013) and surface treatment were observed (p = 0.0014). The highest bond strengths were achieved in both dry and thermocycled conditions when the ceramics were etched with HF acid gel and silanized (17.4 +/- 5.8 and 17.4 +/- 4.8 MPa, respectively). Silanization after HF acid gel and APT treatment increased the results dramatically (14.5 +/- 4.2-17.4 +/- 4.8 MPa) compared to non-silanized groups (2.6 +/- 0.8-8.9 +/- 3.1 MPa) where the failure type was exclusively (100%) adhesive between the cement and the ceramic.Significance. Silanization of the feldspathic ceramic surface after APF or HF acid etching increased the microtensile bond strength results significantly, with the latter providing higher results. Long-term thermocycling and water storage did not decrease the results in silanized groups. (C) 2006 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Sistemas agroflorestais e seus efeitos sobre os atributos químicos em Argissolo Vermelho-Amarelo do Cerrado piauiense

This study aimed to quantify the effects of agroforestry systems (AFS), with different periods of adoption, and slash and burn agriculture (SB) on the chemical attributes of an Ultisol in the 'Cerrado' of Piaui State, Brazil. In two distinct climatic seasons (dry and rainy) four systems were studied: AFS with six (AFS6) and thirteen years (AFS13) of adoption, an area under SB and a native forest (NF), as a reference. In the AFS, in all depths, higher reduction in the Al3+ and H+ + Al3+ contents were observed as well as an increase of pH value and contents of nutrients (N, P, Ca, Mg and K) and organic carbon in soil. In the soil under SB, only in superficial layers, the ash deposited on the soil caused an increase in contents of nutrients, except for P, which was higher in all the depths. There was significant seasonal effect in the contents of nutrients, reducing in the rainy season. Agroforestry systems promoted increase in the nutrient contents of an Ultisol and can be considered useful to improve soil chemical quality in areas of 'Cerrado' of Piau State, Brazil.

A demonstration of dry and viscous damping of an oscillating pendulum

Damped oscillatory motion is one of the most widely studied movements in physics courses. Despite this fact, dry damped oscillatory motion is not commonly discussed in physics textbooks. In this work, we discuss the dry and viscous dampec pendulum, in a teaching experiment that can easily be performed by physics or engineering students.

Bond strength of adhesive systems with different solvents to dry and wet dentin

Aim: This study evaluates bond strength between dentin and composite using adhesives with different solvents to dry and wet dentin. Materials and methods: Ninety bovine incisors were used; the vestibular surfaces were worn by the exposure of an area with a diameter of 4 mm of dentin. The specimens were divided into 6 groups, according to the type of adhesive used and hydratation stals: Group SB-wet: Single Bond 2 in wet dentin, Group SBdry: Single Bond 2 in dry dentin, Group SL-wet: Solobond M in wet dentin, Group SL-dry: Solobond M in dentin dry. Group XPwet: XP Bond in wet dentin, Group XP-dry: XP Bond in dentin dry. They were cut to obtain specimens in the shape of stick with 1 × 1 mm and subjected to microtensile test in universal testing machine with a cross speed of 1mm/min. The data were analyzed with ANOVA and Tukey's tests (5%). Results: ANOVA showed significant differences for surface treatment and interaction, but no difference was found for adhesive factor. The Tukey's test showed that the samples with wet dentin shown higher values of bond strength. Conclusion: The adhesive did not influence in the bond strength. The groups with wet dentin showed higher values of bond strength than groups with dry dentin.