Character of simplified Navier-Stokes (SNS) equations near separation point for two-dimensional laminar flow over a flat plate

It is proved that the simplified Navier-Stokes (SNS) equations presented by Gao Zhi[1], Davis and Golowachof-Kuzbmin-Popof (GKP)[3] are respectively regular and singular near a separation point for a two-dimensional laminar flow over a flat plate. The order of the algebraic singularity of Davis and GKP equation[2,3] near the separation point is indicated. A comparison among the classical boundary layer (CBL) equations, Davis and GKP equations, Gao Zhi equations and the complete Navier-Stokes (NS) equations near the separation point is given.

Orientation preference and fractal character of short fatigue cracks in a weld metal

Short fatigue crack behaviour in a weld metal has been further investigated. The Schmid factor and the fractal dimension of short cracks on iso-stress specimens subjected to reversed bending have been determined and then applied to account for the distribution and orientation characteristics of short fatigue cracks. The result indicates that the orientation preference of short cracks is attributed to the large values of Schmid factor at relevant grains. The Schmid factors of most slip systems, which produced short cracks, are less than or equal to 0.4. Crack length measurements reveal that short crack path, compared to that of long crack, possesses a more stable and relatively larger value of fractal dimension. This is regarded as one of the typical features of short cracks.

加卸载响应比(Load/Unload Response Ratio)、能量加速释放(AE/MR)的临界区尺度及地震预测

加卸载响应比理论的主要思路是 :系统在稳定状态时加载响应与卸载响应的比值与非稳定状态时加载响应与卸载响应的比值是完全不同的。大震前加卸载响应比升高和能量加速释放这两种现象可以用来对地震进行中期预报。同时 ,加卸载响应比理论和能量加速释放可能有相同的物理机制。为了验证这种地震预报方法的可行性 ,我们研究了几例发生在澳大利亚与中国 ,M 5 0～ 7 9之间的地震 ,其中包括破坏严重的澳大利亚纽卡斯尔地震和中国的唐山地震。我们利用以震源中心一定范围内的数据计算了震前的加卸载响应比和能量加速释放的幂律拟合。能量幂律加速释放存在一组最佳的拟合 ,一定范围内加卸载响应比达最大值表明加卸载响应比也有一个临界区尺度。进一步讲 ,加卸载响应比与能量加速释放的临界区尺度是相似的。这些结果表明加卸载响应比与能量加速释放有相同的物理机制。进一步的研究可能会对这种物理机制提供更好的解释 ,同时也能对地震的中期预报提供理论基础

Historia de Portugal restaurado, offerecida ao Illustmo e Excellentmo Senhor D. Joseph Mascarenhas, do Conselhor de sua Magestade, seu mordomo mór... : escrita por D. Luiz de Menezes, conde da Ericeira, do Conselho de Estado de Sua Magestade.

Luis de Menezes, terceiro Conde da Ericeira, nasceu em Lisboa em 1632 e suicidou-se em 1690. Foi chamado de Colbert português por ter estimulado a introdução das artes fabris e industriais em Portugal. Escreveu ‘Historia de Portugal restaurado offerecida ao Illustmo e Excellentmo Senhor D. Joseph Mascarenhas’ em duas partes: a primeira, em 1679 e a segunda, em 1698. A mesma historia obteve depois diversas reimpressões, a saber: Parte I, dividida nos tomos I e II, Lisboa, na Oficina de Domingos Rodrigues, em 1751; Parte II, dividida nos tomos III e IV, Lisboa, na Oficina dos herdeiros de Antonio Pedroso Galram, em 1751. Saiu uma terceira vez em Lisboa em 1759. Segundo Inocêncio, ‘compreende esta historia a narração de todos os sucessos militares e políticos ocorridos em Portugal, desde a restauração de 1640 até o ano de 1668, em que se celebraram as pazes com o reino de Castela’

Contributions to the Geology and Paleontology of the Canal Zone, Panama, and geologically related areas in central America and the West Indies. Part 11: The biologic character and geologic correlations of the sedimentary formations of Panama in their relation to the geologic history of Central America and the West Indies

The paper presents: 1) biologic summaries for each of the formations for which paleontologic data are available, with brief discussions of the geologic age; 2) geologic correlations of the formations and the distribution of their age-equivalents in Central America, the West Indies, and the southeastern United States; 3) an outline of the paleogeography of middle America. The biologic summaries are based on the paleontologic memoirs in this vol. by Messars. Howe, Berry, Chuchman, Jackson, Canu and Bassler and Pilsbry, Miss Rathbun and myself.

Chronica do muito alto, e muito esclarecido principe D. Sancho I, segundo rei de Portugal composta por Ruy de Pina, fidalgo da Casa Real, e Chornista mór do reyno, fielmente Copiada de seu Original, Que Se Conserva no Archivo Real da Torre do Tombo; offerecida a magestade sempre augusta delrey d. João V., Nosso Senhor por Miguel Lopes Ferreyra

Rui de Pina nasceu na cidade de Guarda, provavelmente em 1440, e morreu em Lisboa, por volta de 1522. Ocupou vários cargos de importância e destaque, entre eles os de cronista-mor do reino e de guarda-mor da Torre do Tombo. Como cronista-mor de Portugal, escreveu as biografias de Sancho I, Afonso II, Sancho II, Afonso II, D. Dinis, Afonso IV, Afonso V e D. João II. A descoberta , recentemente, de duas cópias de uma obra quatrocentista contendo as histórias dos sete primeiros reis de Portugal, isto é, de Sancho I a Afonso IV, indica que as Chronicas destes reis escritas por Rui de Pina não passavam de uma refundição daquelas. Como historiador, o autor tem despertado opiniões polêmicas: uns o acusam de mal-informado e desonesto ; outros valorizam a sua capacidade de compreender os eventos de seu tempo, ainda que sob uma visão absolutista. Trata-se de uma “esplêndida edição , adornada de escudos alegóricos com armas reais portuguesas no centro – que encabeçam as dedicatórias -, de artísticas letras iniciais, vinhetas, cabeções e florões decorativos, tudo aberto em chapa de madeira. Os frontispícios das crônicas são impressos em linhas alternadas, em preto e vermelho, e ornados de escudos das armas de Portugal”, conforme esclarece o Catálogo da livraria do Conde Ameal.

Detección automática de presencia/ausencia de atún en imágenes obtenidas mediante sonar de largo alcance a bordo de buques pesqueros y aplicación de Optical Character Recognition (OCR) para la extracción de parámetros

En esta tesis de máster se presenta una metodología para el análisis automatizado de las señales del sonar de largo alcance y una aplicación basada en la técnica de reconocimiento óptico de Optical Character Recognition, caracteres (OCR). La primera contribución consiste en el análisis de imágenes de sonar mediante técnicas de procesamiento de imágenes. En este proceso, para cada imagen de sonar se extraen y se analizan las regiones medibles, obteniendo para cada región un conjunto de características. Con la ayuda de los expertos, cada región es identi cada en una clase (atún o no-atún). De este modo, mediante el aprendizaje supervisado se genera la base de datos y, a su vez, se obtiene un modelo de clasi cación. La segunda contribución es una aplicación OCR que reconoce y extrae de las capturas de pantalla de imágenes de sonar, los caracteres alfanuméricos correspondientes a los parámetros de situación (velocidad, rumbo, localización GPS) y la confi guración de sonar (ganancias, inclinación, ancho del haz). El objetivo de este proceso es el de maximizar la e ficiencia en la detección de atún en el Golfo de Vizcaya y dar el primer paso hacia el desarrollo de un índice de abundancia de esta especie, el cual esté basado en el procesamiento automático de las imágenes de sonar grabadas a bordo de la ota pesquera durante su actividad pesquera rutinaria.

Mineiro do Brasil :melhorado pelo conhecimento da mineralogia, e metalurgia, e das sciencias auxiliadoras /por Mr. de Genssane ; traduzido em portuguez (SIC) de ordem de Sua Alteza Real, o Principe Regente N.S. por Fr. José Mariano da Conceição Velloso

Esse livro é parte do gigantesco esforço de Frei Velloso para oferecer aos brasileiros os melhores livros relacionados com a agricultura, a mineração, a pecuária e as artes que se podiam obter àquela época. Como relata Borba de Moraes, o esforço fracassou devido ao imenso atraso das elites brasileiras da época. A respeito do Fazendeiro do Brasil, o Governador de São Paulo informou à Corte que não conseguira vender um só exemplar da coleção e que não achava quem os quisesse levar de graça.Ressalte-se que esse exemplar não possui as sete gravuras mencionadas por Borba de Moraes.

Um protesto : resposta ás pretenções da França a uma parte do Amazonas manifestadas por Mr. Deloncle

Dado de responsabilidade pesquisado no Lello Universal em 2 volumes, 19-? v. 2 p. 192.

Meristic variation in Sebastes (Scorpaenidae), with an analysis of character association and bilateral pattern and their significance in species separation

This report presents meristic data for nearly all of the known species of Sebasles. Rudimentary caudal ray counts tend to be higher in more active species. The number of caudal rays supported by the hypurals is consistently 14, whereas the number of branched caudal rays varies between 11 and 13. Vertebral counts and most fin-ray counts tend to be lower in species or populations in warmer latitudes, except for pectoral ray counts which tend to have an opposite geographic pattern. On the basis of the small magnitude of meristic and morphometric differences and the lack of other differences between northern and southern samples of "Sebasles caurinus," Sebaslichlhys vexillaris Jordan and Gilbert is regarded as a junior synonym of Sebasles caurinus Richardson. The patterns of bilateral variation in paired meristics are analyzed and their mechanism discussed. The frequency distribution of pectoral ray counts in their right-left combination is shown to be useful in species separation. No association was found between any combination of two meristic features in any species. The author proposes that intrasample associations between meristic features are evidence of sampling heterogeneity. (PDF file contains 21 pages.)

The intestine as a diagnostic character in identifying certain clupeoids (Engraulididae, Clupeidae, Dussumieriidae) and as a morphometric character for comparing anchoveta (Centengraulis mysticetus) populations

ENGLISH: The several species of clupeoid fishes used as baitfish in the Eastern Pacific tuna fishery are, in some cases, sufficiently similar to make identification difficult. During a review of the anatomy of the intestine of clupeoid fishes it was observed that the morphology of the intestine is sometimes a useful character in the identification of systematic groups. The genera at least can be distinguished by means of the topographical anatomy of the intestines. This also may be a useful character because it is often found that a species occurs in the same area as another species that may be confused with it on external inspection, although it belongs to a different genus. SPANISH: La gran similitud morfológica de varias especies del órden Clupeoidea usadas como cebo en la pesquería de atún del Pacifíco Oriental, hace que su identificación sea en algunos casos difícil. Al realizar una revisión anatómica del intestino de los peces clupeoides, se observó que la morfología del mismo es a veces un carácter útil para la identificación de los diversos grupos sistemáticos. Al menos los géneros pueden ser distinguidos por medio de la anatomía topográfica de los intestinos. Esto también puede ser un carácter útil, puesto que a menudo dos especies pertenecientes a géneros diferentes y que ocupen la misma área, pueden ser confundidos si nos basamos solamente en la morfología externa. (PDF contains 24 pages.)

Generating artificial homologous proteins according to the representative family character in molecular mechanics properties - an attempt in validating an underlying rule of protein evolution

The molecular mechanics property is the foundation of many characters of proteins. Based on intramolecular hydrophobic force network, the representative family character underlying a protein’s mechanics property is described by a simple two-letter scheme. The tendency of a sequence to become a member of a protein family is scored according to this mathematical representation. Remote homologs of the WW-domain family could be easily designed using such a mechanistic signature of protein homology. Experimental validation showed that nearly all artificial homologs have the representative folding and bioactivity of their assigned family. Since the molecular mechanics property is the only consideration in this study, the results indicate its possible role in the generation of new members of a protein family during evolution.

A model for energy and morphology of crystalline grain boundaries with arbitrary geometric character

It has been well-established that interfaces in crystalline materials are key players in the mechanics of a variety of mesoscopic processes such as solidification, recrystallization, grain boundary migration, and severe plastic deformation. In particular, interfaces with complex morphologies have been observed to play a crucial role in many micromechanical phenomena such as grain boundary migration, stability, and twinning. Interfaces are a unique type of material defect in that they demonstrate a breadth of behavior and characteristics eluding simplified descriptions. Indeed, modeling the complex and diverse behavior of interfaces is still an active area of research, and to the author's knowledge there are as yet no predictive models for the energy and morphology of interfaces with arbitrary character. The aim of this thesis is to develop a novel model for interface energy and morphology that i) provides accurate results (especially regarding "energy cusp" locations) for interfaces with arbitrary character, ii) depends on a small set of material parameters, and iii) is fast enough to incorporate into large scale simulations.

In the first half of the work, a model for planar, immiscible grain boundary is formulated. By building on the assumption that anisotropic grain boundary energetics are dominated by geometry and crystallography, a construction on lattice density functions (referred to as "covariance") is introduced that provides a geometric measure of the order of an interface. Covariance forms the basis for a fully general model of the energy of a planar interface, and it is demonstrated by comparison with a wide selection of molecular dynamics energy data for FCC and BCC tilt and twist boundaries that the model accurately reproduces the energy landscape using only three material parameters. It is observed that the planar constraint on the model is, in some cases, over-restrictive; this motivates an extension of the model.

In the second half of the work, the theory of faceting in interfaces is developed and applied to the planar interface model for grain boundaries. Building on previous work in mathematics and materials science, an algorithm is formulated that returns the minimal possible energy attainable by relaxation and the corresponding relaxed morphology for a given planar energy model. It is shown that the relaxation significantly improves the energy results of the planar covariance model for FCC and BCC tilt and twist boundaries. The ability of the model to accurately predict faceting patterns is demonstrated by comparison to molecular dynamics energy data and experimental morphological observation for asymmetric tilt grain boundaries. It is also demonstrated that by varying the temperature in the planar covariance model, it is possible to reproduce a priori the experimentally observed effects of temperature on facet formation.

Finally, the range and scope of the covariance and relaxation models, having been demonstrated by means of extensive MD and experimental comparison, future applications and implementations of the model are explored.