Caratterizzazione meccanica di calcestruzzi fibrorinforzati con fibre d'acciaio

L���utilizzo di materiali compositi come i calcestruzzi fibrorinforzati sta diventando sempre pi�� frequente e diffuso. Tuttavia la scelta di nuovi materiali richiede una approfondita analisi delle loro caratteristiche e dei loro comportamenti. I vantaggi forniti dall���aggiunta di fibre d���acciaio ad un materiale fragile, quale il calcestruzzo, sono legati al miglioramento della duttilit�� e all'aumento di assorbimento di energia. L���aggiunta di fibre permette quindi di migliorare il comportamento strutturale del composito, dando vita ad un nuovo materiale capace di lavorare non solo a compressione ma anche in piccola parte a trazione, ma soprattutto caratterizzato da una discreta duttilit�� ed una buona capacit�� plastica. Questa tesi ha avuto come fine l���analisi delle caratteristiche di questi compositi cementizi fibrorinforzati. Partendo da prove sperimentali classiche quali prove di trazione e compressione, si �� arrivati alla caratterizzazione di questi materiali avvalendosi di una campagna sperimentale basata sull���applicazione della norma UNI 11039/2003. L���obiettivo principale di questo lavoro consiste nell���analizzare e nel confrontare calcestruzzi rinforzati con fibre di due diverse lunghezze e in diversi dosaggi. Studiando questi calcestruzzi si �� cercato di comprendere meglio questi materiali e trovare un riscontro pratico ai comportamenti descritti in teorie ormai diffuse e consolidate. La comparazione dei risultati dei test condotti ha permesso di mettere in luce differenze tra i materiali rinforzati con l���aggiunta di fibre corte rispetto a quelli con fibre lunghe, ma ha anche permesso di mostrare e sottolineare le analogie che caratterizzano questi materiali fibrorinforzati. Sono stati affrontati inoltre gli aspetti legati alle fasi della costituzione di questi materiali sia da un punto di vista teorico sia da un punto di vista pratico. Infine �� stato sviluppato un modello analitico basato sulla definizione di specifici diagrammi tensione-deformazione; i risultati di questo modello sono quindi stati confrontati con i dati sperimentali ottenuti in laboratorio.

Sulla progettazione in zona sismica di strutture dotate di dissipatori fluido-viscosi: proposta di una metodologia

CHAPTER 1:FLUID-VISCOUS DAMPERS In this chapter the fluid-viscous dampers are introduced. The first section is focused on the technical characteristics of these devices, their mechanical behavior and the latest evolution of the technology whose they are equipped. In the second section we report the definitions and the guide lines about the design of these devices included in some international codes. In the third section the results of some experimental tests carried out by some authors on the response of these devices to external forces are discussed. On this purpose we report some technical schedules that are usually enclosed to the devices now available on the international market. In the third section we show also some analytic models proposed by various authors, which are able to describe efficiently the physical behavior of the fluid-viscous dampers. In the last section we propose some cases of application of these devices on existing structures and on new-construction structures. We show also some cases in which these devices have been revealed good for aims that lies outside the reduction of seismic actions on the structures. CHAPTER 2:DESIGN METHODS PROPOSED IN LITERATURE In this chapter the more widespread design methods proposed in literature for structures equipped by fluid-viscous dampers are introduced. In the first part the response of sdf systems in the case of harmonic external force is studied, in the last part the response in the case of random external force is discussed. In the first section the equations of motion in the case of an elastic-linear sdf system equipped with a non-linear fluid-viscous damper undergoing a harmonic force are introduced. This differential problem is analytically quite complex and it���s not possible to be solved in a closed form. Therefore some authors have proposed approximate solution methods. The more widespread methods are based on equivalence principles between a non-linear device and an equivalent linear one. Operating in this way it is possible to define an equivalent damping ratio and the problem becomes linear; the solution of the equivalent problem is well-known. In the following section two techniques of linearization, proposed by some authors in literature, are described: the first technique is based on the equivalence of the energy dissipated by the two devices and the second one is based on the equivalence of power consumption. After that we compare these two techniques by studying the response of a sdf system undergoing a harmonic force. By introducing the equivalent damping ratio we can write the equation of motion of the non-linear differential problem in an implicit form, by dividing, as usual, for the mass of the system. In this way, we get a reduction of the number of variables, by introducing the natural frequency of the system. The equation of motion written in this form has two important properties: the response is linear dependent on the amplitude of the external force and the response is dependent on the ratio of the frequency of the external harmonic force and the natural frequency of the system only, and not on their single values. All these considerations, in the last section, are extended to the case of a random external force. CHAPTER 3: DESIGN METHOD PROPOSED In this chapter the theoretical basis of the design method proposed are introduced. The need to propose a new design method for structures equipped with fluid-viscous dampers arises from the observation that the methods reported in literature are always iterative, because the response affects some parameters included in the equation of motion (such as the equivalent damping ratio). In the first section the dimensionless parameter�� is introduced. This parameter has been obtained from the definition of equivalent damping ratio. The implicit form of the equation of motion is written by introducing the parameter ��, instead of the equivalent damping ratio. This new implicit equation of motions has not any terms affected by the response, so that once �� is known the response can be evaluated directly. In the second section it is discussed how the parameter �� affects some characteristics of the response: drift, velocity and base shear. All the results described till this point have been obtained by keeping the non-linearity of the behavior of the dampers. In order to get a linear formulation of the problem, that is possible to solve by using the well-known methods of the dynamics of structures, as we did before for the iterative methods by introducing the equivalent damping ratio, it is shown how the equivalent damping ratio can be evaluated from knowing the value of ��. Operating in this way, once the parameter �� is known, it is quite easy to estimate the equivalent damping ratio and to proceed with a classic linear analysis. In the last section it is shown how the parameter �� could be taken as reference for the evaluation of the convenience of using non-linear dampers instead of linear ones on the basis of the type of external force and the characteristics of the system. CHAPTER 4: MULTI-DEGREE OF FREEDOM SYSTEMS In this chapter the design methods of a elastic-linear mdf system equipped with non-linear fluidviscous dampers are introduced. It has already been shown that, in the sdf systems, the response of the structure can be evaluated through the estimation of the equivalent damping ratio (��sd) assuming the behavior of the structure elastic-linear. We would to mention that some adjusting coefficients, to be applied to the equivalent damping ratio in order to consider the actual behavior of the structure (that is non-linear), have already been proposed in literature; such coefficients are usually expressed in terms of ductility, but their treatment is over the aims of this thesis and we does not go into further. The method usually proposed in literature is based on energy equivalence: even though this procedure has solid theoretical basis, it must necessary include some iterative process, because the expression of the equivalent damping ratio contains a term of the response. This procedure has been introduced primarily by Ramirez, Constantinou et al. in 2000. This procedure is reported in the first section and it is defined ���Iterative Method���. Following the guide lines about sdf systems reported in the previous chapters, it is introduced a procedure for the assessment of the parameter �� in the case of mdf systems. Operating in this way the evaluation of the equivalent damping ratio (��sd) can be done directly without implementing iterative processes. This procedure is defined ���Direct Method��� and it is reported in the second section. In the third section the two methods are analyzed by studying 4 cases of two moment-resisting steel frames undergoing real accelerogramms: the response of the system calculated by using the two methods is compared with the numerical response obtained from the software called SAP2000-NL, CSI product. In the last section a procedure to create spectra of the equivalent damping ratio, affected by the parameter �� and the natural period of the system for a fixed value of exponent ��, starting from the elasticresponse spectra provided by any international code, is introduced.

New target tracking and monitoring guidance laws for UAV

A pursuer UAV tracking and loitering around a target is the problem analyzed in this thesis. The UAV is assumed to be a fixed-wing vehicle and constant airspeed together with bounded lateral accelerations are the main constraints of the problem. Three different guidance laws are designed for ensuring a continuos overfly on the target. Different proofs are presented to demonstrate the stability properties of the laws. All the algorithms are tested on a 6DoF Pioneer software simulator. Classic control design methods have been adopted to develop autopilots for implementig the simulation platform used for testing the guidance laws.

Il dimensionamento delle sovrastrutture stradali non pavimentate

A comparison between main design methods for unpaved roads is presented in this paper. An unpaved road is made up of an unbound aggregate base course lying on a usually weak subgrade. A geosynthetic might be put between the two in reinforcing and separating function. The goal of a design method is to find the appropriate thickness of the base course knowing at least traffic volume, wheel load, tire pressure, undrained cohesion of the subgrade, allowable rut depth and influence of the reinforcement. Geosynthetics can reduce the thickness or the quality of aggregate required and improve the durability of an unpaved road. Geotextiles contribute to save aggregate through interaction friction and separation, while geogrids through interlocking between his apertures and lithic base elements. In the last chapter a case study is discussed and design thicknesses with two design methods for the three possible cases (i.e. unreinforced, geotextile reinforced, geogrid reinforced) are calculated.

STAR splicing mutations cause the severe phenotype of lipoid congenital adrenal hyperplasia: insights from a novel splice mutation and review of reported cases

OBJECTIVE The steroidogenic acute regulatory protein (StAR) transports cholesterol to the mitochondria for steroidogenesis. Loss of StAR function causes lipoid congenital adrenal hyperplasia (LCAH) which is characterized by impaired synthesis of adrenal and gonadal steroids causing adrenal insufficiency, 46,XY disorder of sex development (DSD) and failure of pubertal development. Partial loss of StAR activity may cause adrenal insufficiency only. PATIENT A newborn girl was admitted for mild dehydration, hyponatremia, hyperkalemia and hypoglycaemia and had normal external female genitalia without hyperpigmentation. Plasma cortisol, 17OH-progesterone, DHEA-S, androstendione and aldosterone were low, while ACTH and plasma renin activity were elevated, consistent with the diagnosis of primary adrenal insufficiency. Imaging showed normal adrenals, and cytogenetics revealed a 46,XX karyotype. She was treated with fluids, hydrocortisone and fludrocortisone. DESIGN, METHODS AND RESULTS Genetic studies revealed a novel homozygous STAR mutation in the 3' acceptor splice site of intron 4, c.466-1G>A (IVS4-1G>A). To test whether this mutation would affect splicing, we performed a minigene experiment with a plasmid construct containing wild-type or mutant StAR gDNA of exons-introns 4-6 in COS-1 cells. The splicing was assessed on total RNA using RT-PCR for STAR cDNAs. The mutant STAR minigene skipped exon 5 completely and changed the reading frame. Thus, it is predicted to produce an aberrant and shorter protein (p.V156GfsX19). Computational analysis revealed that this mutant protein lacks wild-type exons 5-7 which are essential for StAR-cholesterol interaction. CONCLUSIONS STAR c.466-1A skips exon 5 and causes a dramatic change in the C-terminal sequence of the protein, which is essential for StAR-cholesterol interaction. This splicing mutation is a loss-of-function mutation explaining the severe phenotype of our patient. Thus far, all reported splicing mutations of STAR cause a severe impairment of protein function and phenotype.

Outcomes of safety and effectiveness in a multicenter randomized, controlled trial of whole-body hypothermia for neonatal hypoxic-ischemic encephalopathy.

BACKGROUND: Whole-body hypothermia reduced the frequency of death or moderate/severe disabilities in neonates with hypoxic-ischemic encephalopathy in a randomized, controlled multicenter trial. OBJECTIVE: Our goal was to evaluate outcomes of safety and effectiveness of hypothermia in infants up to 18 to 22 months of age. DESIGN/METHODS: A priori outcomes were evaluated between hypothermia (n = 102) and control (n = 106) groups. RESULTS: Encephalopathy attributable to causes other than hypoxia-ischemia at birth was not noted. Inotropic support (hypothermia, 59% of infants; control, 56% of infants) was similar during the 72-hour study intervention period in both groups. Need for blood transfusions (hypothermia, 24%; control, 24%), platelet transfusions (hypothermia, 20%; control, 12%), and volume expanders (hypothermia, 54%; control, 49%) was similar in the 2 groups. Among infants with persistent pulmonary hypertension (hypothermia, 25%; control, 22%), nitric-oxide use (hypothermia, 68%; control, 57%) and placement on extracorporeal membrane oxygenation (hypothermia, 4%; control, 9%) was similar between the 2 groups. Non-central nervous system organ dysfunctions occurred with similar frequency in the hypothermia (74%) and control (73%) groups. Rehospitalization occurred among 27% of the infants in the hypothermia group and 42% of infants in the control group. At 18 months, the hypothermia group had 24 deaths, 19 severe disabilities, and 2 moderate disabilities, whereas the control group had 38 deaths, 25 severe disabilities, and 1 moderate disability. Growth parameters were similar between survivors. No adverse outcomes were noted among infants receiving hypothermia with transient reduction of temperature below a target of 33.5 degrees C at initiation of cooling. There was a trend in reduction of frequency of all outcomes in the hypothermia group compared with the control group in both moderate and severe encephalopathy categories. CONCLUSIONS: Although not powered to test these secondary outcomes, whole-body hypothermia in infants with encephalopathy was safe and was associated with a consistent trend for decreasing frequency of each of the components of disability.

Comparisons of Mortality and Pre-discharge Respiratory Outcomes in Small-for-gestational-age and Appropriate-for-gestational-age Premature Infants.

BACKGROUND: There are differences in the literature regarding outcomes of premature small-for-gestational-age (SGA) and appropriate-for gestational-age (AGA) infants, possibly due to failure to take into account gestational age at birth. OBJECTIVE: To compare mortality and respiratory morbidity of SGA and AGA premature newborn infants. DESIGN/METHODS: A retrospective study was done of the 2,487 infants born without congenital anomalies at RESULTS: Controlling for GA, premature SGA infants were at a higher risk for mortality (Odds ratio 3.1, P = 0.001) and at lower risk of respiratory distress syndrome (OR = 0.71, p = 0.02) than AGA infants. However multivariate logistic regression modeling found that the odds of having respiratory distress syndrome (RDS) varied between SGA and AGA infants by GA. There was no change in RDS risk in SGA infants at GA 32 wk (OR = 0.41, 95% CI 0.27 - 0.63; p < 0.01). After controlling for GA, SGA infants were observed to be at a significantly higher risk for developing chronic lung disease as compared to AGA infants (OR = 2.2, 95% CI = 1.2 - 3.9, P = 0.01). There was no significant difference between SGA and AGA infants in total days on ventilator. Among infants who survived, mean length of hospital stay was significantly higher in SGA infants born between 26-36 wks GA than AGA infants. CONCLUSIONS: Premature SGA infants have significantly higher mortality, significantly higher risk of developing chronic lung disease and longer hospital stay as compared to premature AGA infants. Even the reduced risk of RDS in infants born at >/=32 wk GA, (conferred possibly by intra-uterine stress leading to accelerated lung maturation) appears to be of transient effect and is counterbalanced by adverse effects of poor intrauterine growth on long term pulmonary outcomes such as chronic lung disease.

Analysis of sport psychology consultancy at three Olympic Games: Facts and figures

Objectives Despite many reports on best practises regarding onsite psychological services, little research has attempted to systematically explore the frequency, issues, nature and client groups of onsite sport psychology consultancy at the Olympic Games. The present paper will fill this gap through a systematic analysis of the sport psychology consultancy of the Swiss team for the Olympic Games of 2006 in Turin, 2008 in Beijing and 2010 in Vancouver. Design Descriptive research design. Methods The day reports of the official sport psychologist were analysed. Intervention issues were labelled using categories derived from previous research and divided into the following four intervention-issue dimensions: ���general performance���, ���specific Olympic performance���, ���organisational��� and ���personal��� issues. Data were analysed using descriptive statistics, chi square statistics and odds ratios. Results Across the Olympic Games, between 11% and 25% of the Swiss delegation used the sport psychology services. On average, the sport psychologist provided between 2.1 and 4.6 interventions per day. Around 50% of the interventions were informal interventions. Around 30% of the clients were coaches. The most commonly addressed issues were performance related. An association was observed between previous collaboration, intervention likelihood and intervention theme. Conclusions Sport psychologists working at the Olympic Games are fully engaged with daily interventions and should have developed ideally long-term relationships with clients to truly help athletes with general performance issues. Critical incidents, working with coaches, brief contact interventions and team conflicts are specific features of the onsite consultancy. Practitioners should be trained to deal with these sorts of challenges.

Explicit vs implicit affiliation motives predict different social behavior in sports competition

Objectives The present study investigated the predictive value of the explicit and implicit affiliation motive for social behavior in sport competitions. From an information processing perspective, an explicit motive is linked to verbal cues and respondent behavior. The implicit motive in turn is linked to nonverbal stimuli and operant behavior (McClelland, Koestner, & Weinberger, 1989; Schultheiss, 2008). Both respondent affiliative behavior (e.g., verbal interactions with teammates) and operant nonverbal social behavior (e.g., pleasant to opponents) can be observed in racquet sports team competitions. Design & Methods Fifty-two male racquet sportsmen completed the Personality Research Form (explicit affiliation motive) and the Operant Motive Test (implicit affiliation motive). Motive measures were used to predict social behavior during competitions using multiple regression analyses. To this aim real competitive matches were videotaped and analyzed. Results Results show that the explicit affiliation motive is associated with time spent in verbal team contact. The implicit affiliation motive, by contrast, is linked to pleasant nonverbal behavior shown toward opponents. Conclusions Findings suggest that implicit and explicit affiliation motives predict different kinds of social behavior in sports competition respectively. Indirect motive measures may be of additional predictive value for different behavior in real sports settings.

The HIV care cascade in Switzerland: reaching the UNAIDS/WHO targets for patients diagnosed with HIV.

OBJECTIVES To describe the HIV care cascade for Switzerland in the year 2012. DESIGN/METHODS Six levels were defined: (i) HIV-infected, (ii) HIV-diagnosed, (iii) linked to care, (iv) retained in care, (v) on antiretroviral treatment (ART), and (vi) with suppressed viral load (VL). We used data from the Swiss HIV Cohort Study (SHCS) complemented by a nationwide survey among SHCS physicians to estimate the number of HIV-patients not registered in the cohort. We also used Swiss ART sales data to estimate the number of patients treated outside the SHCS network. Based on the number of patients retained in care, we inferred the estimates for levels (i) to (iii) from previously published data. RESULTS We estimate that (i) 15,200 HIV-infected individuals lived in Switzerland in 2012 (margins of uncertainty, 13,400-19,300). Of those, (ii) 12,300 (81%) were diagnosed, (iii) 12,200 (80%) linked, and (iv) 11,900 (79%) retained in care. Broadly based on SHCS network data, (v) 10,800 (71%) patients were receiving ART, and (vi) 10,400 (68%) had suppressed (<200���copies/ml) VLs. The vast majority (95%) of patients retained in care were followed within the SHCS network, with 76% registered in the cohort. CONCLUSIONS Our estimate for HIV-infected individuals in Switzerland is substantially lower than previously reported, halving previous national HIV prevalence estimates to 0.2%. In Switzerland in 2012, 91% of patients in care were receiving ART, and 96% of patients on ART had suppressed VL, meeting recent UNAIDS/WHO targets.

Description of the SAGhE Cohort: A Large European Study of Mortality and Cancer Incidence Risks after Childhood Treatment with Recombinant Growth Hormone.

BACKGROUND The long-term safety of growth hormone treatment is uncertain. Raised risks of death and certain cancers have been reported inconsistently, based on limited data or short-term follow-up by pharmaceutical companies. PATIENTS AND METHODS The SAGhE (Safety and Appropriateness of Growth Hormone Treatments in Europe) study assembled cohorts of patients treated in childhood with recombinant human growth hormone (r-hGH) in 8 European countries since the first use of this treatment in 1984 and followed them for cause-specific mortality and cancer incidence. Expected rates were obtained from national and local general population data. The cohort consisted of 24,232 patients, most commonly treated for isolated growth failure (53%), Turner syndrome (13%) and growth hormone deficiency linked to neoplasia (12%). This paper describes in detail the study design, methods and data collection and discusses the strengths, biases and weaknesses consequent on this. CONCLUSION The SAGhE cohort is the largest and longest follow-up cohort study of growth hormone-treated patients with follow-up and analysis independent of industry. It forms a major resource for investigating cancer and mortality risks in r-hGH patients. The interpretation of SAGhE results, however, will need to take account of the methods of cohort assembly and follow-up in each country.

A process evaluation of a health literacy intervention targeting pediatric providers' communication skills at the Texas Children's Health Plan

Background. Health literacy is an important determinant for quality health care, and affects communication between patients and physicians. Poor communication may result in negative effects in health. Improved communication between patients and physicians could positively affect health outcomes. Communication skills are teachable.^ Objectives. (1) to evaluate the process involved in the design and implementation of a health literacy intervention targeting pediatric providers��� communication skills at the Texas Children���s Health Plan in Houston, Texas; and (2) to describe lessons learned from this process that may be used in future attempts to address the issue of health literacy and health communication. ^ Design/methods. The process evaluation of the implementation of a health literacy strategy at the Texas Children���s Health Plan (TCHP) consisted of a critical analysis of all documents and minutes from meetings of the team of investigators. It also involved a secondary analysis of data collected between December 2006 and June 2007. Descriptive statistics, paired t-test and Wilcoxon-signed-rank test were employed in analyzing the data. This information was complemented with a limited review of existing literature on communication skills training programs. ^ Results. The design of the educational intervention followed recommendations from experts in the field of health literacy. The delivery of the intervention was possible and benefited from existing resources and logistics within the TCHP. Very few targeted providers participated in two offerings of the workshop (6.6% and 1.7% respectively). After the educational intervention, providers showed increased knowledge of health literacy facts and its effects in health (p=0.001); increased awareness of the low health literacy problem (p=0.003); increased expectations for change in practice (p=0.002), and intent to use health literacy strategies for communication immediately following the intervention (p=0.001). Low participation indicated the need for further investigation of barriers to, and means for successful implementation of programs aimed to improving health communication. ^ Conclusions. A short, focused intervention utilizing health literacy strategies for communication appeared effective in increasing knowledge and intentions for change in a small group of pediatric providers. ^

A study of the association between timing of solid food introduction in infants and overweight and obesity in pre-school aged children in NHANES 2003-2008

Background. Previous studies suggest an association between timing of introduction of solid food and increased risk of obesity in pre-school aged children, but no study included a representative sample of US children. We sought to examine whether there was any association between the timing of solid food introduction and overweight/obesity in pre-school aged children. Design/methods. Cross-sectional study of a nationally representative sample (N=2050) of US children aged 2 to 5 years with information on infant feeding practices and measured weight and height from the National Health and Nutrition Examination Survey 2003���2008. The main outcome measure was BMI for age and sex ��� 85th percentile. The main exposure was timing of solid food introduction at < 4, 4���5, or ��� 6 months of age. Binomial logistic regression was used in the analysis controlling for child's sex, birth weight and breastfeeding status as well as maternal age at birth, smoking status and socio-demographic variables. Results. Two thousand and fifty children were included in the sample; 51% male and 49% female; 57.1% Non-Hispanic White, 21.9% Hispanic, 14.0% Non-Hispanic Black, and 7% other race/ethnicity. Twenty-two percent of the children were overweight or obese. Sixty-nine percent were breastfed or fed breast milk at birth and 36% continued breastfeeding for ��� six months. Solid foods were introduced before 4 months of age for 11.2% of the children; 30.3% received solid foods between 4 to 5 months; with 58.6% receiving solid foods at 6 months or later. Timing of solid food introduction was not associated with weight status (OR= 1.36, 95% CI [0.83���2.24]). Formula-fed infants and infants breastfed for < 4 months had increased odds of overweight and obesity (OR=1.54, 95% CI [1.05���2.27] and OR= 1.60, 95% CI [1.05���2.44], respectively) when compared to infants breastfed for ��� 6 months. Conclusion. Timing of solid food introduction was not associated with weight status in a national sample of US children ages 2 to 5 years. More focus should be placed on promoting breastfeeding and healthy infant feeding practices as strategies to prevent obesity in children. ^

C��lculo de espaldones en diques rompeolas : estudio comparativo de las formulaciones actuales y propuesta de una nueva metodolog��a

La presencia de un monolito en la coronaci��n de un dique rompeolas tiene como principales ventajas la reducci��n del volumen de elementos necesarios en el manto y la mejora de la operatividad de los muelles que abriga, lo que supone un importante ahorro de coste tanto de ejecuci��n como de explotaci��n y mantenimiento. Por ello, la utilizaci��n del espald��n en los diques rompeolas se encuentra generalizada desde hace d��cadas en numerosos puertos de todo el mundo. Para el dise��o de este elemento se han ido desarrollando diversas metodolog��as, siendo la primera de ellas (Iribarren y Nogales) propuesta en la d��cada de los cincuenta, y la ��ltima (Berenguer y Baonza) en el a��o 2006. Estos procedimientos se basan en series de ensayos en modelo f��sico y tienen como filosof��a la determinaci��n de las cargas que genera el oleaje al impactar contra el paramento vertical para poder dimensionar un monolito estable frente a tales acciones. Sin embargo, las aver��as que se han producido en este elemento particular, incluso en la pasada d��cada, ponen de relieve la gran sensibilidad de este elemento frente a estas y otras acciones de dise��o. El objetivo de la presente Tesis Doctoral es el desarrollo de un m��todo de dise��o alternativo a los existentes, basado en la observaci��n de diques reales que se encuentran en funcionamiento en la actualidad y mediante el cual se obtenga directamente como resultado las dimensiones principales del monolito en lugar de las cargas debidas al impacto de la ola incidente. Para ello, se ha realizado el an��lisis comparativo de los m��todos de dise��o de espaldones disponibles hasta la fecha. Antes de establecer una nueva metodolog��a primeramente se ha estudiado el Estado del Arte, del cual se ha realizado un an��lisis cr��tico, donde se indican las posibles incertidumbres y limitaciones que presenta cada metodolog��a. Para lograr el objetivo de la presente Tesis Doctoral se desarrolla una investigaci��n basada en los datos de veintitr��s diques ubicados en la fachada mediterr��nea espa��ola, considerando variables tanto clim��ticas como geom��tricas del propio dique. Se ha seguido el principio del Teorema �� para formar monomios adimensionales y, a trav��s de combinaciones entre ellos, establecer relaciones de dependencia. Con los resultados obtenidos se ha elaborado una metodolog��a de dise��o que se propone como respuesta al objetivo planteado. Wall erected on top of a breakwater has two main advantages: lower amount of armour elements and better operating capacity of the inner harbor, which means an appreciable construction, operating and maintenance saving. Therefore, many breakwaters have been designed with crown wall all over the world. Different design methods have been developed through the years. The first one (Iribarren & Nogales) was set in the fifties, and the latest (Berenguer & Baonza) was developed in 2006. All of them are based on laboratory tests series and their common philosophy is to calculate the wave forces on the wall in order to design an element stable against these forces. However, crown wall failures have occured even in last decade, which point the high sensitivity of this element. The objective of this Thesis is to develop an alternative design procedure based on real breakwaters data, which gave as a direct result the most important measures of the crown wall instead of wave loads. In order to achieve the objective, firstly a critical analysis of the State of the Art has been carried out, determining ranges of application and detecting uncertainties. A research on twenty-three breakwaters of the Mediterranean Spanish coast has been carried out to fulfill the objective of this Thesis, taking into account both climatic and geometric parameters. It has been followed Theorem �� to make non-dimensional monomials and, through combinations among them, identify dependency rates. Obtained results lead to a design method.

Single optical surface imaging designs with unconstrained object to image mapping

In this work, novel imaging designs with a single optical surface (either refractive or reflective) are presented. In some of these designs, both object and image shapes are given but mapping from object to image is obtained as a result of the design. In other designs, not only the mapping is obtained in the design process, but also the shape of the object is found. In the examples considered, the image is virtual and located at infinity and is seen from known pupil, which can emulate a human eye. In the first introductory part, 2D designs have been done using three different design methods: a SMS design, a compound Cartesian oval surface, and a differential equation method for the limit case of small pupil. At the point-size pupil limit, it is proven that these three methods coincide. In the second part, previous 2D designs are extended to 3D by rotation and the astigmatism of the image has been studied. As an advanced variation, the differential equation method is used to provide the freedom to control the tangential rays and sagittal rays simultaneously. As a result, designs without astigmatism (at the small pupil limit) on a curved object surface have been obtained. Finally, this anastigmatic differential equation method has been extended to 3D for the general case, in which freeform surfaces are designed.